Polycyanurate networks from anethole dimers: Synthesis and characterization

Enantioselective Synthesis of α-Quaternary Isochromanes by Oxidative Aminocatalysis and Gold Catalysis

A novel strategy that combines oxidative aminocatalysis and gold catalysis allows the preparation of chiral α-quaternary isochromanes, a motif that is prevalent in natural products and synthetic bioactive compounds. In the first step, α-branched aldehydes and propargylic alcohols are transformed into α-quaternary ethers with excellent optical purities (>90 % ee) via oxidative umpolung with DDQ and an amino acid-derived primary amine catalyst. Subsequent gold(I)-catalyzed intramolecular hydroarylation affords the isochromane products with retention of the quaternary stereocenter. A second approach explores the use of allylic alcohols as reaction partners for the oxidative coupling to furnish α-quaternary ethers with generally lower enantiopurities. Stereoretentive cyclization to isochromane products is achieved via intramolecular Friedel-Crafts type alkylation with allylic acetates as a reactive handle. A number of synthetic elaborations and a biological study on these α-quaternary isochromanes highlight the potential applicability of the presented method.

Bio-based Low-k Polymers at High Frequency Derived from Anethole: Synthesis and the Relationship between the Structures and the Properties

Bio-based polymers have been widely investigated as sustainable low dielectric (low-k) materials in past decades. Nevertheless, a few of the polymers with excellent comprehensive properties have been achieved to satisfy the requirements of high-frequency communication application. In this paper, two fluorinated monomers (BCB-F and 2BCB-F) have been designed and successfully prepared from biomass anethole. The thermal-cross-linkable benzocyclobutene and polyfluorobenzene groups were introduced in order to obtain low-k polymers with good comprehensive properties. A control monomer C1 was prepared from the estragole, the isomer of anethole, to study intensively the effect of structures on properties. Among the thermally cured polymers, cured BCB-F with higher fluoride content shows a comparable dielectric constant (Dk) of 2.62 and lower dielectric loss (Df) of 1.31 × 10-3 at a frequency of 10 GHz, as well as better hydrophobic properties with a water uptake of 0.18%. Such good hydrophobic properties enable it to maintain the good dielectric properties even after being soaked in boiling water for 96 h. Cured 2BCB-F with bifunctional benzocyclobutene groups displays excellent heat resistance with a high glass transition temperature (Tg) of 408 °C and a low coefficient of thermal expansion (CTE) of 52 ppm/°C in the temperature range 30-300 °C. Cured 2BCB-F also shows good dielectric properties with a Dk of 2.61 and a Df of 2.60 × 10-3 at a frequency of 10 GHz. The good comprehensive properties reveal that the anethole-based polymers are suitable candidates as matrix or encapsulation resins for application in electronics and microelectric fields.

BIO-BASED CYANATE ESTER RESINS AND THERMOSTABLE POLYMER NETWORKS DERIVED THEREOF. MINI REVIEW

This article is devoted to a review of the literature on a very promising direction in the chemistry of macromolecular compounds: the synthesis and study of polymers, more specifically, high performance polycyanurates based on bis(poly)phenols) of natural origin. Cyanate Ester Resins (CER) are characterized by a very regular structure of the polymer networks, namely polycyanurates (PCNs), obtained by their polycyclotrimerization. They have received much attention because of their unique combination of physical properties, including high thermal stability (> 400 °C), high glass transition temperature (> 270 °C), high fire-, radiation and chemical resistance, low water absorption and low outgassing, high adhesion to different substrates and excellent dielectric properties (ε=2,64−3,11). As a result, CER are currently used as structural or functional materials in aeronautics, space (composite strakes, fins, nose radomes, heat shields), printed circuit boards, adhesives etc. It has to be noted here that CER thermosetting resins, expanding the high-temperature operations regimes, are produced from synthetic petroleum-derived bisphenols, such as bisphenol A, which are toxic and dangerous for environment. In the past decade, naturally occurring phenolic derivatives have arisen as attractive precursors for developing new materials from renewable bio-sources for use in eco-friendly processes. Resins have been prepared utilizing either the whole liquid product or a phenolic-enriched fraction obtained after fractional condensation or further processing, such as solvent extraction or use of greener extraction methods. However, to date, none of the phenolic production and fractionation techniques has been utilized to allow for substitution of 100% of the phenol content of the resin without impacting its effectiveness compared to commercial formulations based on petroleum-derived phenol. The variable nature of the percentage of phenolic compounds in terms of purity from different batches of crops from one season to another and geographical influence does not allow from the reproducibility of phenolic compounds, and hence the resulting polymers. However, the direction that needs to be explored should be oriented towards complete replacement of petro-based phenolics with bio-based ones in the face of an urgent petroleum crisis. In addition, there is a necessity for materials showing enhanced applicability and improved performance. It is a beginning of the era of such a step, which requires further exploration of natural phenolic sources aimed at their enhanced utilization.

Biomass-derived chemical substitutes for bisphenol A: recent advancements in catalytic synthesis

Bisphenol A is an oil-derived, large market volume chemical with a wide spectrum of applications in plastics, adhesives and thermal papers. However, bisphenol A is not considered safe due to its endocrine disrupting properties and reproductive toxicity. Several functional substitutes of bisphenol A have been proposed in the literature, produced from plant biomass. Unless otherwise specified, the present review covers the most significant contributions that appeared in the time span January 2015-August 2019, describing the sustainable catalytic synthesis of rigid diols from biomass derivatives. The focus is thereupon on heterogeneous catalysis, use of green solvents and mild conditions, cascade processes in one-pot, and continuous flow setups. More than 500 up-to-date references describe the various substitutes proposed and the catalytic methods for their manufacture, broken down according to the main biomass types from which they originate.

A guide towards safe, functional and renewable BPA alternatives by rational molecular design: structure–property and structure–toxicity relationships

Putting the pieces together: a guide for rational molecular design of safe, functional and renewable BPA alternatives.

Biomass materials derived from anethole: conversion and application

Renewable biomass has attracted much attention because of its advantages over fossil fuels. Of these biomasses, anethole has been developed as a reliable monomer or precursor for diverse materials with potential applications.

Fast pyrolysis bio-oil from lignocellulosic biomass for the development of bio-based cyanate esters and cross-linked networks

Fast pyrolysis of pine wood was carried out to yield a liquid bio-oil mixture that was separated into organic and aqueous phases. The organic phase (ORG-bio-oil) was characterized by gas chromatography–mass spectroscopy, 31P-nuclear magnetic resonance spectroscopy, and Fourier transform infrared (FTIR) spectroscopy. It was further used as a raw material for producing a mixture of biphenolic compounds (ORG-biphenol). ORG-bio-oil, ORG-biphenol, and bisphenol-A were reacted with cyanogen bromide to yield cyanate ester monomers. Cyanate esters were characterized using FTIR spectroscopy and were thermally cross-linked to develop thermoset materials. Thermomechanical properties of cross-linked cyanate esters were assessed using dynamic mechanical analysis and compared with those of cross-linked bisphenol-A-based cyanate ester. ORG-biphenol cyanate ester was observed to have a superior glass transition temperature (350–380°C) as compared to bisphenol-A cyanate ester (190–220°C). Cyanate esters derived from bio-oil have the potential to be a sustainable alternative to the bisphenol-A-derived analog.

Facile conversion of plant oil (anethole) to a high-performance material

Anethole, a naturally occurring aromatic compound which can be extracted abundantly from plants like star anise, fennel and basil, has been conveniently transformed to a functional monomer in an overall yield of 81% via a two-step procedure.

Experimental Data Extraction and in Silico Prediction of the Estrogenic Activity of Renewable Replacements for Bisphenol A

Bisphenol A (BPA) is a ubiquitous compound used in polymer manufacturing for a wide array of applications; however, increasing evidence has shown that BPA causes significant endocrine disruption and this has raised public concerns over safety and exposure limits. The use of renewable materials as polymer feedstocks provides an opportunity to develop replacement compounds for BPA that are sustainable and exhibit unique properties due to their diverse structures. As new bio-based materials are developed and tested, it is important to consider the impacts of both monomers and polymers on human health. Molecular docking simulations using the Estrogenic Activity Database in conjunction with the decision forest were performed as part of a two-tier in silico model to predict the activity of 29 bio-based platform chemicals in the estrogen receptor-α (ERα). Fifteen of the candidates were predicted as ER binders and fifteen as non-binders. Gaining insight into the estrogenic activity of the bio-based BPA replacements aids in the sustainable development of new polymeric materials.

Synthesis, characterization, and cure chemistry of high performance phosphate cyanate ester resins

Three thermosetting cyanate ester resins with phosphate cores and potential fire-resistant applications have been synthesized and characterized. A trifunctional resin studied in this work (PhosCy3) has a T_g > 360 °C and a char yield of 67% in air.

A high-performance renewable thermosetting resin derived from eugenol

A renewable bisphenol, 4,4'-(butane-1,4-diyl)bis(2-methoxyphenol), was synthesized on a preparative scale by a solvent-free, Ru-catalyzed olefin metathesis coupling reaction of eugenol followed by hydrogenation. After purification, the bisphenol was converted to a new bis(cyanate) ester by standard techniques. The bisphenol and cyanate ester were characterized rigorously by NMR spectroscopy and single-crystal X-ray diffraction studies. After complete cure, the cyanate ester exhibited thermal stability in excess of 350 °C and a glass transition temperature (Tg ) of 186 °C. As a result of the four-carbon chain between the aromatic rings, the thermoset displayed a water uptake of only 1.8% after a four day immersion in 85 °C water. The wet Tg of the material (167 °C) was only 19 °C lower than the dry Tg , and the material showed no significant degradation as a result of the water treatment. These results suggest that this resin is well suited for maritime environments and provide further evidence that full-performance resins can be generated from sustainable feedstocks.

Synergistic physical properties of cocured networks formed from di- and tricyanate esters

The co-cyclotrimerization of two tricyanate ester monomers, Primaset PT-30 and 1,2,3-tris(4-cyanato)propane (FlexCy) in equal parts by weight with Primaset LECy, a liquid dicyanate ester, was investigated for the purpose of exploring synergistic performance benefits. The monomer mixtures formed stable, homogeneous blends that remained in the supercooled liquid state for long periods at room temperature, thereby providing many of the processing advantages of LECy in combination with significantly higher glass transition temperatures (315-360 °C at full cure) due to the presence of the tricyanate-derived segments in the conetwork. Interestingly, the glass transition temperatures of the conetworks after cure at 210 °C, at full cure, and after immersion in 85 °C water for 96 h were all higher than predicted by the Flory-Fox equation, most significantly for the samples immersed in hot water. Conetworks comprising equal parts by weight of PT-30 and LECy retained a "wet" glass transition temperature near 270 °C. The onset of thermochemical degradation for conetworks was dominated by that of the thermally less stable component, while char yields after the initial degradation step were close to values predicted by a linear rule of mixtures. Values for moisture uptake and density in the conetworks also showed behavior that was not clearly different from a linear rule of mixtures. An analysis of the flexural properties of catalyzed versions of these conetworks revealed that, when cured under the same conditions, conetworks containing 50 wt % PT-30 and 50 wt % LECy exhibited higher modulus than networks containing only LECy while conetworks containing 50 wt % FlexCy and 50 wt % LECy exhibited a lower modulus but significantly higher flexural strength and strain to failure. Thus, in the case of "FlexCy", LECy was copolymerized with a tricyanate that provided both improved toughness and a higher glass transition temperature.