Synthesis and characterization of polyamine-based cyclophosphazene hybrid microspheres

Polyphosphazene-Functionalized Microspheres as Efficient Catalysts for the Knoevenagel Reaction under Mild Conditions

Inspired by the formation of microspheres by hexachlorocyclotriphosphazene and 4, 4'-sulfonyldiphenol, polyphosphazene-functionalized microspheres were developed. Benefits from the supported supper basic phosphazene, the yield exceeded 99 % at room temperature in the manner of second-order reaction kinetics toward Knoevenagel reaction and was still maintained at 99 % after 16 runs. In the experimental temperature from 0 °C to 90 °C, the yield increased from 92 % to 99 %, reflecting that the catalyst had strong applicability under mild conditions. This behavior was conducive to energy conservation. Meanwhile, simple separation and recovery further enhanced this advantage. In addition, the catalyst was also found to be insensitive to aqueous solution or organic solvents such as toluene, THF, EtOH and CH₃ CN. This property gave the Knoevenagel reaction a vast choice. All these features exhibit that this novel catalyst is an attractive and applicable alternative in organic synthesis.

Halogen-free layered double hydroxide-cyclotriphosphazene carboxylate flame retardants: effects of cyclotriphosphazene di, tetra and hexacarboxylate intercalation on layered double hydroxides against the combustible epoxy resin coated on wood substrates

The development of halogen-free flame retardants as environmentally friendly and renewable materials for heat and fire-resistant applications in the field of electronics is important to ensure safety measures. In this regard, we have proposed a simple and halogen-free strategy for the synthesis of flame retardant LDH-PN materials to decrease the fire hazards of epoxy resin (EP), via a co-precipitation reaction between Mg(NO3)2 and Al(NO3)3 and the subsequent incorporation of different cyclotriphosphazene (PN) carboxylate anions. The cyclotriphosphazene-based di, tetra and hexacarboxylate-intercalated layered double hydroxides are designated as LDH-PN-DC, LDH-PN-TC and LDH-PN-HC, respectively. Furthermore, the intercalation of cyclotriphosphazene carboxylate anions into the LDH layers was confirmed by PXRD, FT-IR, TGA, solid-state 31P NMR, nitrogen adsorption and desorption analysis (BET), HR-SEM and XPS. Evaluation of the flame retardant (vertical burning test and limiting oxygen index) properties was demonstrated by formulating the LDH-PN materials with epoxy resin (EP) in different ratios coated on wood substrates to achieve the desired behaviour of the EP/LDH-PN composites. Structure-property analysis reveals that EP/LDH-PN-TC-20 wt% and EP/LDH-PN-HC-20 wt% achieved a V 0 rating in the UL-94 V test and achieved higher LOI values (27.7 vol% for EP/LDH-PN-TC-20 wt% and 29 vol% for EP/LDH-PN-HC-20 wt%) compared to the epoxy-coated wood substrate (23.2 vol%), whereas EP/LDH-PN-DC failed in the vertical burning test for various weight percentages of LDH-PN-DC from 5 wt% to 20 wt% in the composites, with a lower LOI value of 22.1 vol%. Excellent flame retardancy was observed for EP/LDH-PN-TC and EP/LDH-PN-HC due to the presence of more binding sites of carboxylate anions in the LDH layers and less or no spiro groups in cyclotriphosphazene compared to that in EP/LDH-PN-DC. In addition, the synergistic flame retardant effect of the combination of LDH and cyclotriphosphazene on the epoxy resin composites remains very effective in creating a non-volatile protective film on the surface of the wood substrate to shelter it from air, absorb the heat and increase the ignition time, which prevents the supply of oxygen during the combustion process. The results of this study show that the proposed strategy for designing flame-retardant properties represents the state-of-the-art, competent coating of inorganic materials for the protection and functionalization of wood substrates.

Synthesis and characterization of biodegradable and antioxidant phosphazene-tannic acid nanospheres and their utilization as drug carrier material

In this study, hexachlorocyclotriphosphazene (HCCP) and tannic acid (TA) were used at different stoichiometric ratios to synthesize cyclomatrix-type polymeric materials with different surface features and dimensions. Using different reactive ratios, the structure and surface functional groups of the synthesized polymeric particles were explained using Fourier-Transform Infrared Spectroscopic (FTIR), Scanning Electron Microscope (SEM), Energy-dispersive X-ray spectroscopy (EDX), X-ray Photoelectron Spectroscopy (XPS) and Thermogravimetric (TG) analysis techniques. With morphologically fully spherical structure and mean 234.82 ± 49.37 nm dimensions, Phz-TA (4:1) nanospheres were researched for in vitro biodegradability, antioxidant features, and usability as a drug release system. In vitro biodegradability of Phz-TA (4:1) nanospheres was investigated at pH = 7.0 and pH = 1.2. Determined to degrade in 8-10 h at these pH values, nanospheres were used for releasing of Rhodamine 6G as a model drug. Due to the rich phenolic structure of the contained tannic acid units, nanospheres were determined to simultaneously have antioxidant features. Thus, this study determined that Phz-TA nanospheres with in vitro biodegradability and antioxidant features are promising polymeric materials for use as a potential drug-carrier in the future.

Oligoglycidol-Functionalised Styrene Macromolecules as Reactive Surfactants in the Emulsion Polymerisation of Styrene: The Impact of Chain Length and Concentration on Particle Size and Colloidal Stability

Reactive surfactants (surfmers), which are covalently attached to the surface of sub-micron sized polymer particles during emulsion polymerisation, are applied to tailor the surface functionality of polymer particles for an application of choice. We present a systematic study on the use of oligoglycidol-functionalised styrene macromolecules as surfmers in the emulsion polymerization of styrene. Firstly, we report the impact of the surfmer concentration on the particle size for polymerisations performed above and below the critical micelle concentration. Secondly, we report the influence of the oligoglycidol chain length on the particle size. Thirdly, we conducted experiments to analyse the influence of the surfmer concentration and its chain length on the colloidal stability of the aqueous polystyrene nanoparticles in sodium chloride solutions. We demonstrated that the size of polystyrene particles could be influenced by changing both the surfmer concentration and its chain length. Furthermore, we showed that the colloidal stability of the oligoglycidol-functionalized polystyrene particles is dependent on the particle size, and not directly related to the oligoglycidol chain length.

Design of Poly(cyclotriphosphazene)-Functionalized Zirconium Phosphate Nanoplatelets To Simultaneously Enhance the Dynamic Mechanical and Flame Retardancy Properties of Polyamide 6

To obtain polyamide 6 (PA6) composites with improved flame retardancy and thermomechanical properties, highly cross-linked supramolecular poly(cyclotriphosphazene)-functionalized α-zirconium phosphate (f-ZrP) nanoplatelets were synthesized and melt-blended with PA6 in a twin-screw extruder. The performance enhancements of composites were investigated through measuring the dynamic mechanical property and observing cone calorimeter data, toxic gas evolution, and UL-94 rating. The thermomechanical performance of PA6 was increased by 37.2% after composite formation with f-ZrP. As for the fire retardancy performance, compared to neat PA6, the composite containing 10 wt % f-ZrP showed 41.7 and 30.4% decrease in the peak heat and total heat release rates, respectively, and the UL-94 rating of the composite was V-0. Moreover, the thermogravimetric analysis combined with infrared spectroscopy revealed that the addition of f-ZrP to the PA6 led to decrease in the evolution of the volatile compounds and toxic gases, with the formation of highly cross-linked P-N-containing dense char with microspheres, providing a strong barrier to the inhibition of the heat and flammable volatile components transferring between the flame zone area and substrate during the combustion test. Finally, based on the obtained results, the possible mechanisms for improved mechanical and fire retardancy properties of the composites were proposed.

Acid-Responsive and Biologically Degradable Polyphosphazene Nanodrugs for Efficient Drug Delivery

To enhance the therapeutic effects and reduce the damage to normal tissues in cancer chemotherapy, it is indispensable to develop drug delivery carriers with controllable release and good biocompatibility. In this work, acid-responsive and degradable polyphosphazene (PPZ) nanoparticles were synthesized by the reaction of hexachlorotripolyphosphonitrile (HCCP) with 4-hydroxy-benzoic acid (4-hydroxy-benzylidene)-hydrazide (HBHBH) and anticancer drug doxorubicin (DOX). The controlled release of DOX could be realized based on the acid responsiveness of acylhydrazone in HBHBH. Experimental results showed that polyphosphazene nanoparticles remained stable in the body's normal fluids (pH ∼ 7.4), while they were degraded and controllable release of DOX in an acidic environment such as tumors (pH ∼ 6.8) and lysosome and endosome (∼5.0) in cancer cells In particular, the doxorubicin (DOX)-loading ratio was fair high and could be tuned from 10.6 to 52.6% by changing the dosing ratio of DOX to HBHBH. Meanwhile, the polyphosphazene nanodrugs showed excellent toxicity to tumor cells and reduced the side effect to normal cells both in vitro and in vivo due to their enhanced permeability and retention (EPR) effect and pH-sensitive degradation properties. Therefore, the constructed pH-sensitive drug delivery system has great potential for cancer chemotherapy.

131 I-Labeled Multifunctional Polyphosphazene Nanospheres for SPECT Imaging-Guided Radiotherapy of Tumors

Design of theranostic nanoplatforms represents a major topic for current nanomedicine. Here, the preparation of multifunctional poly(cyclotriphosphazene-co-polyethylenimine) nanospheres (PNSs) labeled with radionuclide ¹³¹ I for single photon emission computed tomography (SPECT) imaging-guided radiotherapy of tumors is reported. In this work, PNSs are prepared using hexachlorocyclotriphosphazene as a crosslinker to crosslink branched polyethylenimine (PEI) via a nucleophilic substitution reaction, modified with 3-(4'-hydroxyphenyl) propionic acid-OSu (HPAO) for ¹³¹ I labeling, and reacted with 1,3-propane sulfonate (1,3-PS) to render the particles with antifouling property, followed by acetylation of the remaining surface amines and labeling with ¹³¹ I. The acquired PNS.NHAc-HPAO(¹³¹ I)-PS particles are well characterized. It is shown that the multifunctional PNSs with an average size of 184 ± 29.3 nm exhibit favorable antifouling properties, high ¹³¹ I labeling efficiency (76.05 ± 3.75%), and excellent radiostability and colloidal stability. With these properties owned, the developed PNS.NHAc-HPAO(¹³¹ I)-PS spheres enable much more efficient SPECT imaging and radiotherapy of a xenografted tumor model in vivo than the PEI counterpart material (PEI.NHAc-HPAO(¹³¹ I)-PS). The developed PNSs may be used as a versatile platform for further development of different forms of nanomedicine for various biomedical applications.

Cyclomatrix Polyphosphazene Porous Networks with J-Aggregated Multiphthalocyanine Arrays for Dual-Modality Near-Infrared Photosensitizers

Here, we have developed a kind of cyclomatrix polyphosphazene with excellent photophysical properties and pursued their potential of being organic photosensitizers for dual-modality phototherapy. Briefly, hexachlorocyclophosphazene (HCCP) with D_{3 h} symmetry is adopted as a synthon to attach Zn(II) phthalocyanine (ZnPc) to form dendritic units that are covalently expanded into a soluble porous network through the nucleophilic substitution reaction. Molecular simulation reveals that the multi-ZnPc units around HCCP can be oriented in a side-by-side manner, leading to the remarkably red-shifted and intense absorbance in the near-infrared (NIR) region. To validate the potential in bioapplication, such ZnPc-based polyphosphazenes are assembled by incorporation of polyvinylpyrrolidone (PVP) to produce the uniform nanoparticles with aqueous dispersibility and biocompatibility. From the in vitro results, the PVP-stabilized photosensitizing nanoparticles can undergo the photothermal/photodynamic processes to concurrently generate heat and singlet oxygen for efficiently killing cancer cells upon exposure to a single-bandwidth NIR laser (785 nm). Compared with the known organic photosensitizers, cyclomatrix polyphosphazene would be a promising platform to configure a diversity of reticular arrays with dense and oriented arrangement of dye molecules, leading to their largely enhanced photophysical and photochemical properties.

Thin cyclomatrix polyphosphazene films: interfacial polymerization of hexachlorocyclotriphosphazene with aromatic biphenols

Cyclomatrix polyphosphazene films have been synthesized by interfacial polymerization of hexachlorocyclotriphosphazene with a variety of biphenols.

Synthesis of polyphosphazenes with different side groups and various tactics for drug delivery

Polyphosphazenes (PPZs) are hybrid polymers comprising a main chain containing nitrogen and phosphorous linked through interchanging single and double bonds, and side chains.

Borazine-based inorganic–organic hybrid cyclomatrix microspheres by silicon/boron exchange precipitation polycondensation

Borazine-based inorganic–organic hybrid cyclomatrix microspheres with a mean diameter of about 900 nm have been obtained via a novel silicon/boron exchange precipitation polycondensation approach.

Preparation of polyphosphazenes: a tutorial review

Poly(organo)phosphazenes are a family of inorganic molecular hybrid polymers with very diverse properties due to the vast array of organic substituents possible. This tutorial review aims to introduce the basics of the synthetic chemistry of polyphosphazenes, detailing for readers outside the field the essential knowledge required to design and prepare polyphosphazenes with desired properties. A particular focus is given to some of the recent advances in their chemical synthesis which allows not only the preparation of polyphosphazenes with controlled molecular weights and polydispersities, but also novel branched architectures and block copolymers. We also discuss the preparation of supramolecular structures, bioconjugates and in situ forming gels from this diverse family of functional materials. This tutorial review aims to equip the reader to prepare defined polyphosphazenes with unique property combinations and in doing so we hope to stimulate further research and yet more innovative applications for these highly interesting multifaceted materials.

A strategy for the synthesis of cyclomatrix-polyphosphazene nanoparticles from non-aromatic monomers

Cyclomatrix-polyphosphazenes (C-PPZs) are a new class of nanomaterials that have attracted significant interest owing to their unique inorganic–organic hybrid structure and tunable properties.