The Role of Stabilizing Copolymer in Determining the Physicochemical Properties of Conjugated Polymer Nanoparticles and Their Nanomedical Applications

Conjugated polymer nanoparticles (CPNs) are a promising class of nanomaterials for biomedical applications, such as bioimaging, gene and drug delivery/release, photodynamic therapy (PDT), photothermal therapy (PTT), and environmental sensing. Over the past decade, many reports have been published detailing their synthesis and their various potential applications, including some very comprehensive reviews of these topics. In contrast, there is a distinct lack of overview of the role the stabilizing copolymer shells have on the properties of CPNs. This review attempts to correct this oversight by scrutinizing reports detailing the synthesis and application of CPNs stabilized with some commonly-used copolymers, namely F127 (Pluronic poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) diacrylate), PSMA (poly(styrene-co-maleic anhydride)), PLGA (poly(D, L-lactide-co-glycolide)) and PEG (polyethylene glycol) derivatives. The analysis of the reported physicochemical properties and biological applications of these CPNs provides insights into the advantages of each group of copolymers for specific applications and offers a set of guidance criteria for the selection of an appropriate copolymer when designing CPNs-based probes. Finally, the challenges and outlooks in the field are highlighted.

A PEDOT nano-composite for hyperthermia and elimination of urological bacteria

Novel modalities for overcoming recurrent urinary tract infections associated with indwelling urinary catheters are needed, and rapidly induced hyperthermia is one potential solution. PEDOT nanotubes are a class of photothermal particles that can easily be incorporated into silicone to produce thin, uniform coating on medical grade silicone catheters; subsequent laser stimulation therein imparts temperature elevations that can eliminate bacteria and biofilms. PEDOT silicone coatings are stable following thermal sterilization and repeated heating and cooling cycles. Laser stimulation can induce temperature increases of up to 55 °C in 300 s, but only 45 s was needed for ablation of UTI inducing E. coli biofilms in vitro. This work also demonstrates that mild hyperthermia of 50 °C, applied for only 31 s in the presence of antibiotics could eliminate E. coli biofilm as effectively as high temperatures. This work culminates in the evaluation of the PEDOT NTs for photothermal elimination of E. coli in an in vivo model to demonstrate the safety and effectiveness of a photothermal nanocomposite (16 s treatment time) for rapid clearance of E. coli.

Materials and device design for advanced phototherapy systems

Phototherapy has recently emerged as a promising solution for cancer treatment due to its multifunctionality and minimal invasiveness. Notwithstanding the limited penetration depth of light through skin, the ability of photopharmaceutical device systems to deliver light to desired lesions is important. The device system deploys advanced biocompatible materials and fabrication technologies for electronics, and eventually enables more efficient phototherapy. In this review, we focus on diverse optical electronics to illuminate the lesion site with light. Then, moving on to the phototherapy, we highlight photo-thermal therapy with light absorbing materials, photo-activated chemotherapy with light sensitive materials, and photo-dynamic therapy using photosensitizers. Furthermore, we introduce a drug delivery system that can deliver these photopharmaceutical agents spatiotemporally to the tumor site. To this end, we provide a general overview of materials and devices for phototherapy and discuss critical issues and pending limitations of such phototherapy.

Semiconducting polymer nanoparticles for photothermal ablation of colorectal cancer organoids

Colorectal cancer (CRC) treatment is currently hindered by micrometastatic relapse that cannot be removed completely during surgery and is often chemotherapy resistant. Targeted theranostic nanoparticles (NPs) that can produce heat for ablation and enable tumor visualization via their fluorescence offer advantages for detection and treatment of disseminated small nodules. A major hurdle in clinical translation of nanoparticles is their interaction with the 3D tumor microenvironment. To address this problem tumor organoid technology was used to evaluate the ablative potential of CD44-targeted polymer nanoparticles using hyaluronic acid (HA) as the targeting agent and coating it onto hybrid donor acceptor polymer particles (HDAPPs) to form HA-HDAPPs. Additionally, nanoparticles composed from only the photothermal polymer, poly[4,4-bis(2-ethylhexyl)-cyclopenta[2,1-b;3,4-b']dithiophene-2,6-diyl-alt-2,1,3-benzoselenadiazole-4,7-diyl] (PCPDTBSe), were also coated with HA, to form HA-BSe NPs, and evaluated in 3D. Monitoring of nanoparticle transport in 3D organoids revealed uniform diffusion of non-targeted HDAPPs in comparison to attenuated diffusion of HA-HDAPPs due to nanoparticle-matrix interactions. Computational diffusion profiles suggested that HA-HDAPPs transport may not be accounted for by diffusion alone, which is indicative of nanoparticle/cell matrix interactions. Photothermal activation revealed that only HA-BSe NPs were able to significantly reduce tumor cell viability in the organoids. Despite limited transport of the CD44-targeted theranostic nanoparticles, their targeted retention provides increased heat for enhanced photothermal ablation in 3D, which is beneficial for assessing nanoparticle therapies prior to in vivo testing.

Bioreactivity and Sunlight Potentiation of Hybrid Polymer Nanoparticles in Oysters, Crassostrea virginica

Polymer dynamic organic theranostic spheres (PolyDOTS) are being studied as a photothermal ablation treatment of cancer and are activated by blue or near-infrared light. PolyDOTS or related hybrid polymeric nanoparticle products could be mass-produced, and it is expected that they, like any other engineered nanoparticle (ENP), could be found in aquatic environments. The purpose of this study was to investigate the potential toxicity of these types of hybrid nanoparticles on nontarget marine organisms. To investigate the potential of even greater toxicity due to solar exposure, the PolyDOTS were exposed to the sun for 12 h and "charged". Once charged, hepatopancreas and gill tissues from oysters (Crassostrea virginica) were exposed to concentrations of both uncharged and charged PolyDOTS for 24 h in vitro. The effects of PolyDOTS on lysosomal destabilization, cell viability, and free radical damage were analyzed. Significant sublethal toxicity was observed with the charged particles, and reduced viability was observed with uncharged particles in vitro. In vivo imaging studies using IVIS (In Vivo Imaging System) indicated PolyDOTS uptake in tissues. These types of studies are important for understanding the potential effects of light sensitive ENPs in oysters and their broader ecological impacts on estuarine ecosystems.

Self-assembly of pendant functional groups grafted PEDOT as paracetamol detection material

In this paper, pendant functional group grafted EDOTs, such as EDOTCH₂NH₂, EDOTCH₂OH and EDOTCH₂SH, were selected as monomers for the preparation of their respective polymers via a common chemical oxidative polymerization method in the absence of CTAB by varying the [monomer]/[oxidant] ratios. The self-assembly mechanism of the polymers was systematically studied by discussing the hydrogen bonding effect, acidity and electron-donating ability, as well as the chain initiation and chain growth of the chemically oxidated polymerized monomers. These functional group grafted PEDOTs were applied to the electrochemical determination of paracetamol (PAR) to further investigate the effect of the pendant functional groups (-SH, -OH, -NH₂) on the electrochemical sensing behaviour of the polymers. The results indicated that the hydrogen bonding effect of the pendant functional groups was vital to the self-assembly of the polymer chains, and the PEDOTs with -OH and -SH groups had a tendency to self-assemble into a spherical structure, while the PEDOT with an -NH₂ group exhibited a fibrous structure. The electrochemical response of PEDOTs with functional groups was better than that that of PEDOT alone, and the highest electrochemical response was observed in PEDOT with an -SH group ([monomer]/[oxidant] = 1 : 8).

Conjugated polymer nano-systems for hyperthermia, imaging and drug delivery

Hyperthermia has shown tremendous therapeutic efficiency in the treatment of cancer due to its controllability, minimal invasiveness and limited side effects compared to the conventional treatment techniques like surgery, radiotherapy and chemotherapy. To improve the precision of hyperthermia specifically to a tumor location, near infra-red (NIR) light activatable inorganic metal nanoparticles have served as effective photothermal therapy materials, but toxicity and non-biodegradability have limited their clinical applications. Conjugated polymer nanoparticles have overcome these limitations and are emerging as superior photothermal materials owing to their excellent light harvesting nature, biocompatibility and tunable absorption properties. In this review we focus on the development of organic conjugated polymers (polyaniline, polypyrrole, polydopamine etc.) and their nanoparticles, which have broad NIR absorption. Such materials elicit photothermal effects upon NIR stimulation and may also serve as carriers for delivery of therapeutic and contrast agents for combined therapy. Subsequently, the emergence of donor-acceptor based semiconducting polymer nanoparticles with strong absorbance that is tunable across the NIR have been shown to eradicate tumors by either hyperthermia alone or combined with other therapies. The design of multifunctional polymer nanoparticles that absorb near- or mid- infrared light for heat generation, as well as their diagnostic abilities for precise biomedical applications are highlighted.

Materials and design of nanostructured broadband light absorbers for advanced light-to-heat conversion

Light-to-heat conversion systems have been attracting growing research interest in the last few decades, due to their highly intriguing photothermal properties and their wide applications ranging from biomedical applications to solar energy harvesting to mechanical actuators. In general, because the light-to-heat conversion efficiency depends strongly on the absorbing material, significant efforts have been focused on fabricating broadband light absorbers. However, there are several challenges associated with the design and fabrication of light absorbers, such as minimizing heat loss, and optimizing the broadband light absorption and omnidirectional light absorption. Thus, the rational design of enhanced light absorbers is critical to achieve efficient light absorption over a broad wavelength range. In this paper, we introduce the basic theory of light absorption and heat transfer, then summarize fundamental understanding of representative light-to-heat conversion agents including carbon-based, semiconductor-based and plasmonic metal-based materials and structures, and highlight state-of-the-art structural designs towards the development of broadband light absorbers. In addition, the practical applications of these materials and designs are also discussed.

Assessing fluorescence detection and effective photothermal therapy of near-infrared polymer nanoparticles using alginate tissue phantoms

OBJECTIVE

Photothermal therapy (PTT) uses light absorbing materials to generate heat for treatment of diseases, like cancer. The advantages of using PTT components that absorb in the near-infrared (NIR) include reduced tissue auto-fluorescence and higher penetration depths. However, NIR laser light can still be scattered and absorbed by biological tissues, thus decreasing the amount of the energy reaching the PTT agents. We have developed two distinct formulations of NIR-absorbing nanoparticles, one which can be utilized for PTT only, and another for both PTT and fluorescence imaging of colorectal cancer. In this work, the fluorescence detection limit and the PTT heating potential of the two nanoparticle types were determined using alginate tissue phantoms. The objective of this study was to determine the PTT efficiency and theranostic potential of the nanoparticles by irradiating 3D collagen tumor spheroids, containing nanoparticles and CT26 mouse colorectal cancer cells, through increasing tissue phantom thicknesses and then quantifying cell death. Materials and Methods Our lab has previously developed nanoparticles based on the semiconducting, conjugated polymer poly[4,4-bis(2-ethylhexyl)-cyclopenta[2,1-b;3,4-b']dithiophene-2,6-diyl-alt-2,1,3-benzoselenadiazole-4,7-diyl] (PCPDTBSe). We have also made a hybrid nanoparticle that heats and fluoresces by combining PCPDTBSe polymer with the fluorescent poly[(9,9-dihexylfluorene)-co-2,1,3-benzothiadiazole-co-4,7-di(thiophen-2-yl)-2,1,3-benzothiadiazole] (PFBTDBT10) polymer to yield nanoparticles termed Hybrid Donor-Acceptor Polymer Particles (H-DAPPs). H-DAPPs and PCPDTBSe nanoparticles were added to three-dimensional collagen gel tumor spheroids in order to represent nanoparticles in a tumor. Alginate tissue phantoms, comprised of an optical scattering agent (Intralipid) and an optical absorbing material (hemoglobin) in order to mirror biological tissue scattering effects, were used to simulate increasing tissue thickness between the nanoparticles and the PTT energy source.

RESULTS

Fluorescence from the H-DAPPs was detectable through 6 mm of tissue phantoms. It was found that less than 10% of the laser energy could penetrate through 9 mm of tissue phantoms and only 60% of the laser energy passed through the 1.5 mm phantoms, regardless of laser power. PTT experiments, using 800 nm light at 2.2 W/cm² for 60 s through tissue phantoms to stimulate nanoparticle-doped tumor spheroids, showed 55% cell death through 3 mm of tissue phantoms using H-DAPPs. Results from using the PCPDTBSe nanoparticles showed 72% cell death through 3 mm and over 50% cell death through 6 mm of tissue phantoms.

CONCLUSION

The results of this work validated the heating potential and fluorescence detection limitations of two theranostic polymer nanoparticles by utilizing alginate tissue phantoms and 3D tumor spheroids. H-DAPPs and PCPDTBSe polymer nanoparticles can be utilized as effective PTT agents by exploiting their absorption of NIR light and H-DAPPs have advantageous fluorescence for imaging colorectal cancer. The data generated from this study design can allow for other NIR absorbing and fluorescing nanoparticle formulations to be evaluated prior to in vivo experimentation. Lasers Surg. Med. 50:1040-1049, 2018. © 2018 Wiley Periodicals, Inc.

Controllable Synthesis of Gold Nanorod/Conducting Polymer Core/Shell Hybrids Toward in Vitro and in Vivo near-Infrared Photothermal Therapy

Photothermal therapy (PTT) is a minimally invasive tumor treatment technology, and is regarded as a potential anticancer strategy because of its targeted destruction and low toxicity. Specifically, near-infrared light-induced PTT has attracted intriguing interest because of the high transparency of tissue, blood, and water. However, effective PTT generally requires the assistance of photothermal agents. Gold nanorods (GNRs) and conducting polymer are often used as photothermal materials because of their high absorption efficiency and photothermal conversion efficiency. Herein, we combined GNRs with poly( o-methoxyaniline) (POMA, a polyaniline derivative) to form GNRs/POMA core/shell hybrids through the surfactant-assisted chemical oxidative polymerization route and studied their photothermal conversion properties. The configuration of GNRs/POMA core/shell hybrids has been precisely controlled through adjusting the monomer concentration, and the relationship between morphology and absorption band of GNRs/POMA core/shell hybrids has been revealed. Finally, the in vitro and in vivo experiments were performed, and the results indicated that the GNRs/POMA core/shell hybrids with optimized absorbance at around 808 nm exhibited the best performance on photothermal therapy under 808 nm NIR laser irradiation.

Hybrid Donor-Acceptor Polymer Particles with Amplified Energy Transfer for Detection and On-Demand Treatment of Breast Cancer

Judicious combination of semiconducting polymers with alternating electron donor (D) and acceptor (A) segments created hybrid nanoparticles with amplified energy transfer and red-shifted emission, while simultaneously providing photothermal capabilities. Hybrid D-A polymer particles (H-DAPPs) passively localized within orthotopic breast tumors, serving as bright fluorescent beacons. Laser stimulation induced heat generation on par with gold nanorods, resulting in selective destruction of the tumor. H-DAPPs can also undergo multiple thermal treatments, with no loss of fluorescence intensity or photothermal potential. These results indicate that H-DAPPs provide new avenues for the synthesis of hybrid nanoparticles useful in localized detection and treatment of disease.

Glutathione responsive micelles incorporated with semiconducting polymer dots and doxorubicin for cancer photothermal-chemotherapy

Nanoplatform integrated with photothermal therapy (PTT) and chemotherapy has been recognized a promising agent for enhancing cancer therapeutic outcomes, but still suffer from less controllability for optimizing their synergistic effects. We fabricated glutathione (GSH) responsive micelles incorporated with semiconducting polymer dots and doxorubicin (referred as SPDOX NPs) for combining PTT with chemotherapy to enhance cancer therapeutic efficiency. These micelles, with excellent water dispersibility, comprises of three distinct functional components: (1) the monomethoxy-poly(ethylene glycol)-S-S-hexadecyl (mPEG-S-S-C₁₆), which forms the micelles, can render hydrophobic substances water-soluble and improve the colloidal stability; (2) disulfide linkages can be cleaved in a reductive environment for tumor specific drug release due to the high GSH concentrations of tumor micro-environment; (3) PCPDTBT dots and anti-cancer drug DOX that are loaded inside the hydrophobic core of the micelle can be applied to simultaneously perform PTT and chemotherapy to achieve significantly enhanced tumor killing efficiency both in vitro and in vivo. In summary, our studies demonstrated that our SPDOX NPs with simultaneous photothermal-chemotherapy functions could be a promising platform for a tumor specific responsive drug delivery system.

Near-infrared light-activatable polymeric nanoformulations for combined therapy and imaging of cancer

Near infrared (NIR) light allows deep tissue penetration and high spatial resolution due to the reduced scattering of long-wavelength photons. NIR light-activatable polymer nanoparticles are widely exploited for enhanced cancer imaging (diagnosis) and therapy owing to their superior photostability, photothermal conversion efficiency (or high emission rate), and minimal toxicity to cells and tissues. This review surveys the most recent advances in the synthesis of different NIR-absorbing and emissive polymer nanoformulations, and their applications for cancer imaging, photothermal therapy, theranostics and combination therapy by delivering multiple small molecule chemotherapeutics. Photo-responsive drug delivery systems for NIR light-triggered drug release are also discussed with particular emphasis on their molecular designs and formulations as well as photo-reaction mechanisms. Finally, outlook and challenges are presented regarding potential clinical applications of NIR light-activatable nanoformulations.

Strategies to Improve Cancer Photothermal Therapy Mediated by Nanomaterials

The deployment of hyperthermia-based treatments for cancer therapy has captured the attention of different researchers worldwide. In particular, the application of light-responsive nanomaterials to mediate hyperthermia has revealed promising results in several pre-clinical assays. Unlike conventional therapies, these nanostructures can display a preferential tumor accumulation and thus mediate, upon irradiation with near-infrared light, a selective hyperthermic effect with temporal resolution. Different types of nanomaterials such as those based on gold, carbon, copper, molybdenum, tungsten, iron, palladium and conjugated polymers have been used for this photothermal modality. This progress report summarizes the different strategies that have been applied so far for increasing the efficacy of the photothermal therapeutic effect mediated by nanomaterials, namely those that improve the accumulation of nanomaterials in tumors (e.g. by changing the corona composition or through the functionalization with targeting ligands), increase nanomaterials' intrinsic capacity to generate photoinduced heat (e.g. by synthesizing new nanomaterials or assembling nanostructures) or by optimizing the parameters related to the laser light used in the irradiation process (e.g. by modulating the radiation wavelength). Overall, the development of new strategies or the optimization and combination of the existing ones will surely give a major contribution for the application of nanomaterials in cancer PTT.

Recent progress and development on polymeric nanomaterials for photothermal therapy: a brief overview

This review article summarizes the recent development and progress of polymeric photothermal agents for photothermal therapy and imaging-guided photothermal therapy applications.

Dual wavelength stimulation of polymeric nanoparticles for photothermal therapy

BACKGROUND AND OBJECTIVE

Photothermal therapy (PTT) has several applications in the areas of wound healing, pain management, bacterial infection control, and cancer treatment dependent on the temperature that is generated. PTT is often used exclusively with near infrared (NIR) light and most nanoparticles (NP) used for PTT are designed to absorb within one narrow range of wavelengths. We have developed a dual-wavelength photothermal therapy by capitalizing on the dual absorption of nanoparticles in the blue and NIR range.

MATERIALS AND METHODS

Our lab has previously developed NP based on the semiconducting, conjugated polymer poly[4,4-bis(2-ethylhexyl)-cyclopenta[2,1-b;3,4-b']dithiophene-2,6-diyl-alt-2,1,3-benzoselenadiazole-4,7-diyl] (PCPDTBSe). The NP have strong absorption in the blue and NIR regions. In this report, we have explored the heat generated by PCPDTBSe NP using simultaneous delivery of 450 and 800 nm light, either independently or together for photothermal ablation of mouse colorectal cancer cells.

RESULTS

The heat generation studies indicated that the use of either 450 or 800 nm wavelengths at the same fluences produced approximately the same temperature change of deionized water. Fluences of 114.6 and 229.2 J/cm² , utilizing 450 or 800 nm light applied individually resulted in temperatures of 8-47°C above ambient temperature, leading to a 90% reduction in cell viability. Simultaneous stimulation of the PCPDTBSe NP with 450 and 800 nm light effectively doubles the effective power delivered, resulting in temperatures 18-63°C above ambient and 100% photothermal ablation of the colorectal cancer cells.

CONCLUSION

The results of this study demonstrate that PCPDTBSe polymer NP can be utilized as effective PTT agents by capitalizing on their dual absorption of both blue and NIR light. Lasers Surg. Med. 48:893-902, 2016. © 2016 Wiley Periodicals, Inc.

Recent Advances in Nanostructured Conducting Polymers: from Synthesis to Practical Applications

Conducting polymers (CPs) have been widely studied to realize advanced technologies in various areas such as chemical and biosensors, catalysts, photovoltaic cells, batteries, supercapacitors, and others. In particular, hybridization of CPs with inorganic species has allowed the production of promising functional materials with improved performance in various applications. Consequently, many important studies on CPs have been carried out over the last decade, and numerous researchers remain attracted to CPs from a technological perspective. In this review, we provide a theoretical classification of fabrication techniques and a brief summary of the most recent developments in synthesis methods. We evaluate the efficacy and benefits of these methods for the preparation of pure CP nanomaterials and nanohybrids, presenting the newest trends from around the world with 205 references, most of which are from the last three years. Furthermore, we also evaluate the effects of various factors on the structures and properties of CP nanomaterials, citing a large variety of publications.

Preparation and evaluation of lipid emulsified docetaxel-loaded nanoparticles

OBJECTIVES

Lipid emulsified nanoparticles (LPNPs) have been developed to load anticancer drug docetaxel (DTX) in this work.

METHODS

We evaluated DTX-loaded lipid emulsified nanoparticles (DTX-LPNPs) in vitro compared with the conventional nanoparticles (DTX-NPs). The newly developed formulation was compared with DTX-NPs in terms of physicochemical properties and in-vitro efficacy.

KEY FINDINGS

These two formulations had similar physicochemical properties in our results. And it has been proven that phosphatidylethanolamine had higher emulsification efficiency (20-fold of polyvinyl alcohol) in the same preparation procedure. The in-vitro release of DTX from DTX-LPNPs showed burst release initially and then followed by a sustained release, which prolonged the half time. The cytotoxicity test indicated that the DTX-LPNPs were more effective against tumour growth, and the IC50 of Duopafei, DTX-NPs and DTX-LPNPs for the inhibition of human lung cancer A549 cells at 48 h (n = 3) were found to be 3.53 ± 0.43, 1.15 ± 0.06 and 0.55 ± 0.08 μm, respectively. The evaluation of the cellular uptake showed that DTX-LPNPs improved the drug delivery into cytoplasm compared with the commercial product Duopafei and DTX-NPs.

CONCLUSIONS

DTX-LPNPs may be a promising formulation for cancer therapy.