Amphiphilic Polyethylene-b-poly(L-lysine) Block Copolymer: Synthesis, Self-Assembly, and Responsivity

Polyethylene-b-polypeptide copolymers are biologically interesting, but studies of their synthesis and properties are very few. This paper reports synthesis and characterization of well-defined amphiphilic polyethylene-block-poly(L-lysine) (PE-b-PLL) block copolymers by combining nickel-catalyzed living ethylene polymerization with controlled ring-opening polymerization (ROP) of ε-benzyloxycarbonyl-L-lysine-N-carboxyanhydride (Z-Lys-NCA) and sequential post-functionalization. Amphiphilic PE-b-PLL block copolymers self-assembled into spherical micelles with a hydrophobic PE core in aqueous solution. The pH and ionic responsivities of PE-b-PLL polymeric micelles were investigated by means of fluorescence spectroscopy, dynamic light scattering, UV-circular dichroism, and transmission electron microscopy. The variation of pH values led to the conformational alteration of PLL from α-helix to coil, thereby changing the micelle dimensions.

Amphiphilic Polymers for Color Dispersion: Toward Stable and Low-Viscosity Inkjet Ink

Amphiphilic random and block copolymers were synthesized as potential inkjet inks. This study evaluated the potential of these polymers for color dispersion by examining the following factors: surface tension, zeta potential, viscosity, and particle size. Acrylic acid and (ethoxyethoxy)ethyl acrylate were used as the hydrophilic molecular units. Styrene, butyl acrylate, and phenoxyethyl acrylate were used as hydrophobic units. Color dispersions were prepared by using organic dye and these amphiphilic polymers. The color dispersions containing random copolymers exhibited low viscosity, which is preferable for jetting, but the dye particles tended to sediment after the thermal aging test. In contrast, those containing block copolymers showed high viscosity, which was unsuitable for jetting. However, they retained their initial dispersion state after the aging test. The advantages and disadvantages of each monomer arrangement (random or block) were demonstrated, providing a future outlook on the molecular design of polymer dispersants for color dispersions.

Morphological transitions of micelles induced by the block arrangements of copolymer blocks: Dissipative particle dynamics simulation

Polymer micelles with distinct morphologies and unique microphase separation microstructures can exhibit different properties and functions, holding the great promises for a range of biomedical applications. In current work, the...

Oligodimethylsiloxane-Oligoproline Block Co-Oligomers: the Interplay between Aggregation and Phase Segregation in Bulk and Solution

Discrete block co-oligomers (BCOs) assemble into highly ordered nanostructures, which adopt a variety of morphologies depending on their environment. Here, we present a series of discrete oligodimethylsiloxane-oligoproline (oDMS-oPro) BCOs with varying oligomer lengths and proline end-groups, and study the nanostructures formed in both bulk and solution. The conjugation of oligoprolines to apolar siloxanes permits a study of the aggregation behavior of oligoproline moieties in a variety of solvents, including a highly apolar solvent like methylcyclohexane. The apolar solvent is more reminiscent of the polarity of the siloxane bulk, which gives insights into the supramolecular interactions that govern both bulk and solution assembly processes of the oligoproline. This extensive structural characterization allows the bridging of the gap between solution and bulk assembly. The interplay between the aggregation of the oligoproline block and the phase segregation induced by the siloxane drives the assembly. This gives rise to disordered, micellar microstructures in apolar solution and crystallization-driven lamellar nanostructures in the bulk. While most di- and triblock co-oligomers adopt predictable morphological features, one of them, oDMS15-oPro6-NH2, exhibits pathway complexity leading to gel formation. The pathway selection in the complex interplay between aggregation and phase segregation gives rise to interesting material properties.

Micellization Behaviour of Linear and Nonlinear Block Copolymers Based on Poly(n-hexyl isocyanate) in Selective Solvents

Block copolymers have attracted significant scientific and economic interest over the last decades due to their ability to self-assemble into ordered structures both in bulk and in selective solvents. In this work, the self-assembly behaviour of both linear (diblocks, triblocks and pentablocks) and nonlinear (miktoarm stars and a block-graft) copolymers based on poly(n-hexyl isocyanate), PHIC, were studied in selective solvents such as n-heptane and n-dodecane. A variety of experimental techniques, namely static and dynamic light scattering, dilute solution viscometry and atomic force microscopy, were employed to study the micellar structural parameters (e.g., aggregation number, overall micellar size and shape, and core and shell dimensions). The effect of the macromolecular architecture, the molecular weight and the copolymer composition on the self-assembly behaviour was studied. Spherical micelles in equilibrium with clusters were obtained from the block copolymers. Thermally stable, uniform and spherical aggregates were found from the triblock copolymers. The poly(n-hexyl isocyanate)-b-polyisoprene-b-poly(n-hexyl isocyanate),-HIH copolymers tend to adopt closed loop conformation, leading to more elongated cylindrical-type structures upon increasing the concentration. Clustering effects were also reported in the case of the pentablock terpolymers. The topology of the blocks plays an important role, since the poly(n-hexyl isocyanate)-b-polystyrene-b-polyisoprene-b-polystyrene-b-poly(n-hexyl isocyanate), HSISH terpolymer shows intermicellar fusion of spherical micelles, leading to the formation of extended networks. The formation of spherical micelles in equilibrium with clusters was obvious in the case of the miktoarm stars, whereas the block-graft copolymer shows the existence of mainly unimolecular micelles.

The self-assembly behavior of polymer brushes induced by the orientational ordering of rod backbones: a dissipative particle dynamics study

This work proposed the “rod–coil competitive mechanism” for the self-assembly of polymer brushes with rod–coil backbones.

Interfacial self-assembly of amphiphilic conjugated block copolymer into 2D nanotapes

In the present work, the evaporation-induced interfacial self-assembly behavior of an amphiphilic conjugated polymer, poly(3-hexylthiophene)-b-poly(acrylic acid) (P3HT-b-PAA), at the oil-water interface is explored. Novel 2D nanotapes of P3HT-b-PAA are prepared via the interfacial self-assembly. It is inferred that P3HT segments adopt a special conformation at the oil-water interface, which facilitates the packing of alkyl side chains and π-π interaction. The UV-vis spectrum further confirms that the ordering degree of P3HT segments is increased while transmission IR and Raman spectroscopic studies suggest that the P3HT chains adopt a more planar conformation at the oil-water interface. It is proposed that the formation of the nanotapes is driven by the ordered packing of the P3HT chains at the oil-water interface. Finally, the packing model of the P3HT chains inside the nanotapes is roughly proposed.

Scalable Fiber-like Micelles and Block Co-micelles by Polymerization-Induced Crystallization-Driven Self-Assembly

Self-assembled 1D block copolymer nanoparticles (micelles) are of interest for a range of applications. However, morphologically pure samples are often challenging to access, and precise dimensional control is not possible. Moreover, the development of synthetic protocols that operate on a commercially viable scale has been a major challenge. Herein, we describe the preparation 1D fiber-like micelles with crystalline cores at high concentrations by a one-pot process termed polymerization-induced crystallization-driven self-assembly (PI-CDSA). We also demonstrate the formation of uniform fibers by living PI-CDSA, a process in which block copolymer synthesis, self-assembly, and seeded growth are combined. We have demonstrated that the method is successful for block copolymers that possess the same composition as that of the seed (homoepitaxial growth) and also where the coronal chemistries differ to give segmented 1D fibers known as block co-micelles. We have also shown that heteroepitaxial growth allows the formation of scaled-up block co-micelles where the composition of both the core and corona was varied. These proof-of-concept experiments indicate that PI-CDSA is a promising, scalable route to a variety of polydisperse or uniform 1D nanoparticles based on block copolymers with different crystalline core chemistries and, therefore, functions.

Bioactive gel self-assembled from phosphorylate biomimetic peptide: A potential scaffold for enhanced osteogenesis

Bone morphogenetic protein-2 biomimetic peptide (BMPBP) is a potent osteoinductive cytokine and plays a critical role during bone regeneration. Efforts to prepare hydrogels with surface modification or physical absorption of bioactive molecules do not provide sufficient bioactivity to meet the requirements of clinical application. The goal of this study was to form a three-dimensional hydrogel comprised of BMP-2 core sequence oligopeptide, phosphoserine, a synthetic cell adhesion peptide (RGDS), and polyaspartic acid to synergistically promote osteogenesis. Experiments performed in vitro revealed that the peptide gel was conducive to adhesion and proliferation of rat marrow mesenchymal stem cells (rMSCs). In addition, RT-PCR analysis indicated that rMSCs allowed better expression of osteogenesis-related genes such as BMP-2, runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), osteocalcin (OCN), and osteopontin (OPN). Use of the rat cranial bone defects model with micro-CT 3D reconstruction showed that bone regeneration patterns occurred from one side edge toward the center of the area implanted with the prepared biomimetic peptide hydrogels, demonstrating significantly accelerated bone regeneration. This work will provide a basis to explore the further application potential of this bioactive scaffold.

Physical stimuli-responsive liposomes and polymersomes as drug delivery vehicles based on phase transitions in the membrane

This paper reviews liposomes with crystalline phase and polymersomes exhibiting crystalline and thermotropic liquid crystalline phases in the membrane. Intriguing morphologies of vesicles are described, including spherical, ellipsoidal and faceted vesicles, produced by a large variety of amphiphilic molecules and polymers with nematic phase, smectic phase or crystalline phase. It is highlighted how the phase transitions and the phase grain boundaries could be used ingeniously to destabilize the vesicular structure and to achieve cargo-release under the action of external stimulation. These liposomes and polymersomes are responsive to physical stimuli, such as temperature variation, shear stress, light illumination, and magnetic and electric fields. These stimuli-responsive properties make them promising candidates as new smart drug delivery systems.

Mesoscale Block Copolymers

Materials composed of well-defined mesoscale building blocks are ubiquitous in nature, with noted ability to assemble into hierarchical structures possessing exceptional physical and mechanical properties. Fabrication of similar synthetic mesoscale structures will offer opportunities for precise conformational tuning toward advantageous bulk properties, such as increased toughness or elastic modulus. This requires new materials designs to be discovered to impart such structural control. Here, the preparation of mesoscale polymers is achieved by solution fabrication of functional polymers containing photoinduced chemical triggers. Subsequent photopatterning affords mesoscale block copolymers composed of distinct segments of alternating chemical composition. When dispersed in appropriate solvents, selected segments form helices to generate architectures resembling block copolymers, but on an optically observable size scale. This approach provides a platform for producing mesoscale geometries with structural control and potential for driving materials assembly comparable to examples found in nature.

Polymerization-induced self-assembly of liquid crystalline ABC triblock copolymers with long solvophilic chains

Polymerization-induced self-assembly was exploited to investigate the self-assembly behavior of liquid crystalline triblock copolymers with long solvophilic chains.

Aqueous self-assembly of hydrophobic macromolecules with adjustable rigidity of the backbone

P(FpC₃P) (Fp: CpFe(CO)₂; C₃P: propyl diphenyl phosphine) has a helical backbone, resulting from piano stool metal coordination geometry, which is rigid with intramolecular aromatic interaction of the phenyl groups. The macromolecule is hydrophobic, but the polarized CO groups can interact with water for aqueous self-assembly. The stiffness of P(FpC₃P), which is adjustable by temperature, is an important factor influencing the morphologies of kinetically trapped assemblies. P(FpC₃P)₇ self-assembles in DMSO/water (10/90 by volume) into lamellae at 25 °C, vesicles at 40 °C and irregular aggregates at higher temperatures (60 and 70 °C). The colloidal stability decreases in the order of lamellae, vesicles and irregular aggregates. Dissipative particle dynamics (DPD) simulation reveals the same temperature-dependent self-assembled morphologies with an interior of hydrophobic aromatic groups covered with the metal coordination units. The rigid backbone at 25 °C accounts for the formation of the layered morphology, while the reduced rigidity of the same P(FpC₃P)₇ at 40 °C curves up the lamellae into vesicles. At a higher temperature (60 or 70 °C), P(FpC₃P)₇ behaves as a random coil without obvious amphiphilic segregation, resulting in irregular aggregates. The stiffness is, therefore, a crucial factor for the aqueous assembly of macromolecules without obvious amphiphilic segregation, which is reminiscent of the solution behavior observed for many hydrophobic biological macromolecules such as proteins.

RAFT synthesis and micellization of a photo-, temperature- and pH-responsive diblock copolymer based on spiropyran

A photo-, temperature- and pH-responsive diblock copolymer containing a rigid spiropyran moiety was synthesized and its micellization was investigated.