Advances in polymer precursors and bio-based polymers synthesized from 5-hydroxymethylfurfural

5-Hydroxymethylfurfural and its Downstream Chemicals: A Review of Catalytic Routes

Biomass assumes an increasingly vital role in the realm of renewable energy and sustainable development due to its abundant availability, renewability, and minimal environmental impact. Within this context, 5-hydroxymethylfurfural (HMF), derived from sugar dehydration, stands out as a critical bio-derived product. It serves as a pivotal multifunctional platform compound, integral in synthesizing various vital chemicals, including furan-based polymers, fine chemicals, and biofuels. The high reactivity of HMF, attributed to its highly active aldehyde, hydroxyl, and furan ring, underscores the challenge of selectively regulating its conversion to obtain the desired products. This review highlights the research progress on efficient catalytic systems for HMF synthesis, oxidation, reduction, and etherification. Additionally, it outlines the techno-economic analysis (TEA) and prospective research directions for the production of furan-based chemicals. Despite significant progress in catalysis research, and certain process routes demonstrating substantial economics, with key indicators surpassing petroleum-based products, a gap persists between fundamental research and large-scale industrialization. This is due to the lack of comprehensive engineering research on bio-based chemicals, making the commercialization process a distant goal. These findings provide valuable insights for further development of this field.

Acid-Catalyzed Activation and Condensation of the =C5H Bond of Furfural on Aldehydes, an Entry Point to Biobased Monomers

Furfural is an industrially relevant biobased chemical platform. Unlike classical furan, or C-alkylated furans, which have been previously described in the current literature, the =C5H bond of furfural is unreactive. As a result, on a large scale, C=C and C=O bond hydrogenation/hydrogenolysis is mainly performed, with furfuryl alcohol and methyl tetrahydrofuran being the two main downstream chemicals. Here, we show that the derivatization of the -CHO group of furfural restores the reactivity of its =C5H bond, thus permitting its double condensation on various alkyl aldehydes. Overcoming the recalcitrance of the =C5H bond of furfural has opened an access to a biobased monomer, whose potential have been investigated in the fabrication of renewably-sourced poly(silylether). By means of a combined theoretical-experimental study, a reactivity scale for furfural and its protected derivatives against carbonylated compounds has been established using an electrophilicity descriptor, a means to predict the molecular diversity and complexity this pathway may support, and also to de-risk any project related to this topic. Finally, by using performance criteria for industrial operations in the field of fuels and commodities, we discussed the industrial potential of this work in terms of cost, E-factor, reactor productivity and catalyst consumption.

The Use of 5-Hydroxymethylfurfural (5-HMF) in Multi-Component Hantzsch Dihydropyridine Synthesis

The renewable 5-hydroxymethylfurfural (5-HMF) has gained a wide interest from the chemistry community as a valuable biobased platform opening the way to many applications. Despite an impressive number of publications reporting either its preparation or its functionalization, its direct use in fine chemistry, and especially in multi-component reaction (MCR), is less reported. Here, we report a complete study of the use of 5-HMF in the Hantzsch dihydropyridines synthesis. The strategy was applied to a scope of β-dicarbonyl molecules (including β-ketoesters and 1,3-diketones) in a 3-component procedure leading to a series of symmetrical 1,4-dihydropyridines derived from 5-HMF in excellent yields. The study was extended to the 4-component protocol using one equivalent of a β-ketoester and one equivalent of 5,5-dimethyl-1,3-cyclohexanedione (dimedone), which efficiently provided the corresponding unsymmetrical dihydropyridines.

Synthesis of Biobased Poly(butylene Furandicarboxylate) Containing Polysulfone with Excellent Thermal Resistance Properties

A synthetic biopolymer derived from furandicarboxylic acid monomer and hydroxyethyl-terminated poly(ether sulfone) is presented. The synthesis involves 4,4'-dichlorodiphenyl sulfone and 4,4-dihydroxydiphenyl sulfone, resulting in poly(butylene furandicarboxylate)-poly(ether sulfone) copolyesters (PBFES) through melt polycondensation with titanium-catalyzed polymerization. This facile method yields segmented polyesters incorporating polysulfone, creating a versatile group of high-temperature thermoplastics with adjustable thermomechanical properties. The PBFES copolyesters demonstrate an impressive tensile modulus of 2830 MPa and a tensile strength of 84 MPa for PBFES55. Additionally, the poly(ether sulfone) unit imparts a relatively high glass transition temperature (Tg), ranging from 36.6 °C for poly(butylene 2,5-furandicarboxylate) to 112.3 °C for PBFES62. Moreover, the complete amorphous film of PBFES exhibits excellent transparency and solvent resistance, making it suitable for applications, such as food packaging materials.

The key role of pretreatment for the one-step and multi-step conversions of European lignocellulosic materials into furan compounds

Nowadays, an increased interest from the chemical industry towards the furanic compounds production, renewable molecules alternatives to fossil molecules, which can be transformed into a wide range of chemicals and biopolymers. These molecules are produced following hexose and pentose dehydration. In this context, lignocellulosic biomass, owing to its richness in carbohydrates, notably cellulose and hemicellulose, can be the starting material for monosaccharide supply to be converted into bio-based products. Nevertheless, processing biomass is essential to overcome the recalcitrance of biomass, cellulose crystallinity, and lignin crosslinked structure. The previous reports describe only the furanic compound production from monosaccharides, without considering the starting raw material from which they would be extracted, and without paying attention to raw material pretreatment for the furan production pathway, nor the mass balance of the whole process. Taking account of these shortcomings, this review focuses, firstly, on the conversion potential of different European abundant lignocellulosic matrices into 5-hydroxymethyl furfural and 2-furfural based on their chemical composition. The second line of discussion is focused on the many technological approaches reported so far for the conversion of feedstocks into furan intermediates for polymer technology but highlighting those adopting the minimum possible steps and with the lowest possible environmental impact. The focus of this review is to providing an updated discussion of the important issues relevant to bringing chemically furan derivatives into a market context within a green European context.

Recent Advances in Lignocellulose-Based Monomers and Their Polymerization

Replacing fossil-based polymers with renewable bio-based polymers is one of the most promising ways to solve the environmental issues and climate change we human beings are facing. The production of new lignocellulose-based polymers involves five steps, including (1) fractionation of lignocellulose into cellulose, hemicellulose, and lignin; (2) depolymerization of the fractionated cellulose, hemicellulose, and lignin into carbohydrates and aromatic compounds; (3) catalytic or thermal conversion of the depolymerized carbohydrates and aromatic compounds to platform chemicals; (4) further conversion of the platform chemicals to the desired bio-based monomers; (5) polymerization of the above monomers to bio-based polymers by suitable polymerization methods. This review article will focus on the progress of bio-based monomers derived from lignocellulose, in particular the preparation of bio-based monomers from 5-hydroxymethylfurfural (5-HMF) and vanillin, and their polymerization methods. The latest research progress and application scenarios of related bio-based polymeric materials will be also discussed, as well as future trends in bio-based polymers.

Recent advances in the development of green furan ring-containing polymeric materials based on renewable plant biomass

Fossil resources are rapidly depleting, forcing researchers in various fields of chemistry and materials science to switch to the use of renewable sources and the development of corresponding technologies. In this regard, the field of sustainable materials science is experiencing an extraordinary surge of interest in recent times due to the significant advances made in the development of new polymers with desired and controllable properties. This review summarizes important scientific reports in recent times dedicated to the synthesis, construction and computational studies of novel sustainable polymeric materials containing unchanged (pseudo)aromatic furan cores in their structure. Linear polymers for thermoplastics, branched polymers for thermosets and other crosslinked materials are emerging materials to highlight. Various polymer blends and composites based on sustainable polyfurans are also considered as pathways to achieve high-value-added products.

Diverse Applications of Biomass-Derived 5-Hydroxymethylfurfural and Derivatives as Renewable Starting Materials

This Review summarizes recent efforts to capitalize on 5-hydroxymethylfurfural (HMF) and related furans as emerging building blocks for the synthesis of fine chemicals and materials, with a focus on advanced applications within medicinal and polymer chemistry, as well as nanomaterials. As with all chemical industries, these fields have historically relied heavily on petroleum-derived starting materials, an unsustainable and polluting feedstock. Encouragingly, the emergent chemical versatility of biomass-derived furans has been shown to facilitate derivatization towards valuable targets. Continued work on the synthetic manipulation of HMF, and related derivatives, for access to a wide range of target compounds and materials is crucial for further development. Increasingly, biomass-derived furans are being utilized for a wide range of chemical applications, the continuation of which is paramount to accelerate the paradigm shift towards a sustainable chemical industry.

Sustainable Catalytic Transformation of Biomass-Derived 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)tetrahydrofuran

5-Hydroxymethylfurfural (5-HMF), one of the most important platform molecules in biorefinery, can be directly obtained from a vast diversity of biomass materials. Owing to the reactive functional groups (-CHO and -CH₂ OH) in the structure, this versatile building block undertakes several transformations to provide a wealth of high value-added products. Among numerous well-established paradigms, the catalytic hydrogenation of 5-HMF towards 2,5-bis(hydroxymethyl)tetrahydrofuran (BHMTHF) is of great interest because this downstream diol can be exploited in a wide range of industrial applications. Not surprisingly, incessant endeavors from both academia and industry to upgrade this catalytic process have been established over the years. The main aim of this Review was to provide a comprehensive overview on the development of heterogeneous metal catalysts for the 5-HMF-to-BHMTHF transformation. Herein, the rational design and utility of hydrogenating catalysts were elaborated in many aspects including metal types (Ni, Co, Pd, Ru, Pt, and bimetals), solid supports, preparation method, recyclability, operating conditions, and reaction regime (batch and continuous flow). In addition, the assessment of cooperative catalysts to convert carbohydrates into BHMTHF under one-pot cascade, tentative mechanism, as well as prospects and challenges for the chemo-selective hydrogenation of 5-HMF were also highlighted.

Recent Advances in the Catalytic Hydroconversion of 5-Hydroxymethylfurfural to Valuable Diols

Biomass, a globally available resource, is a promising alternative feedstock for fossil fuels, especially considering the current energy crisis and pollution. Biomass-derived diols, such as 2,5-bis(hydroxymethyl)furan, 2,5-bis(hydroxymethyl)-tetrahydrofuran, and 1,6-hexanediol, are a significant class of monomers in the polyester industry. Therefore, the catalytic conversion of biomass to valuable diols has received extensive research attention in the field of biomass conversion and is a crucial factor in determining the development of the polyester industry. 5-Hydroxymethylfurfural (HMF) is an important biomass-derived compound with a C6-furanic framework. The hydroconversion of HMF into diols has the advantages of being simple to operate, inexpensive, environmentally friendly, safe, and reliable. Therefore, in the field of diol synthesis, this method is regarded as a promising approach with significant industrialization potential. This review summarizes recent advances in diol formation, discusses the roles of catalysts in the hydroconversion process, highlights the reaction mechanisms associated with the specificities of each active center, and provides an outlook on the challenges and opportunities associated with the research on biomass-derived diol synthesis.

Renewable Furfural-Based Polyesters Bearing Sulfur-Bridged Difuran Moieties with High Oxygen Barrier Properties

With the goal of achieving high barrier with bio-based materials, for example, for packaging applications, a series of novel furfural-based polyesters bearing sulfide-bridged difuran dicarboxylic acid units with high oxygen barrier properties were synthesized and characterized. For the novel poly(alkylene sulfanediyldifuranoate)s, a 11.2–1.9× higher barrier improvement factor compared to amorphous poly(ethylene terephthalate) was observed which places the novel polyesters in the top class among previously reported 2,5-furandicarboxylic acid (FDCA) and 2,2′-bifuran-based polyesters. Titanium-catalyzed polycondensation reactions between the novel synthesized monomer, dimethyl 5,5′-sulfanediyldi(furan-2-carboxylate), and four different diols, ethylene glycol, 1,3-propanediol, 1,4-butanediol, and 1,5-pentanediol, afforded difuran polyesters with high intrinsic viscosities (0.76–0.90 dL/g). These polyesters had good thermal stability, decomposing at 342–363 and 328–570 °C under nitrogen and air, respectively, which allowed processing them into free-standing films via melt-pressing. In tensile testing of the film specimens, tensile moduli in the range of 0.4–2.6 GPa were recorded, with higher values observed for the polyesters with shorter diol units. Interestingly, besides the low oxygen permeability, the renewable sulfide-bridged furan monomer also endowed the polyesters with slight UV shielding effect, with cutoff wavelengths of ca. 350 nm, in contrast to FDCA-based polyesters, which lack significant UV light absorption at over 300 nm.

Controlled preparation of grafted starch modified with Ni nanoparticles for biodegradable polymer nanocomposites and its application in food packaging

Grafting of starch with methyl methacrylate was carried out using a free radical mechanism. Free radicals were generated by the thermal disintegration of potassium persulphate at the temperature of 60°C. A variety of experimental methods were investigated to check the effect of different parameters such as (temperature, amount of starch, quantity of monomer) for efficient grafting. The optimum temperature found for good grafting was 60°C. The initial amount of starch was taken as 0.75 g. Keeping the amount of starch constant, the quantity of monomer was reduced gradually from 10 to 2 ml in portions of 5 and 3 ml. The controlled biodegradability of the grafted product was obtained by using a 3 ml monomer in 0.75 g starch. This grafted polymer showed 31.45% biodegradability in 60 days. The nanocomposite of starch grafted methyl methacrylate was prepared by incorporating 0.02 g Ni nanoparticles in the reaction flask 15 min before the completion of reaction time. The starch grafted polymer and nanocomposite of this were fully characterized by SEM, FTIR, TGA, and DSC techniques. The soil burial method was applied to estimate the biodegradability of samples. The polymer containing Ni nanoparticles was less biodegradable than without nanoparticles. Such polymers can be efficiently used as packaging material for food items.

Catalytic Furfural/5-Hydroxymethyl Furfural Oxidation to Furoic Acid/Furan-2,5-dicarboxylic Acid with H2 Production Using Alkaline Water as the Formal Oxidant

Furfural and 5-hydroxymethyl furfural (HMF) are abundantly available biomass-derived renewable chemical feedstocks, and their oxidation to furoic acid and furan-2,5-dicarboxylic acid (FDCA), respectively, is a research area with huge prospective applications in food, cosmetics, optics, and renewable polymer industries. Water-based oxidation of furfural/HMF is a lucrative approach for simultaneous generation of H2 and furoic acid/FDCA. However, this process is currently limited to (photo)electrochemical methods that can be challenging to control, improve, and scale up. Herein, we report well-defined ruthenium pincer catalysts for direct homogeneous oxidation of furfural/HMF to furoic acid/FDCA, using alkaline water as the formal oxidant while producing pure H2 as the reaction byproduct. Mechanistic studies indicate that the ruthenium complex not only catalyzes the aqueous oxidation but also actively suppresses background decomposition by facilitating initial Tishchenko coupling of substrates, which is crucial for reaction selectivity. With further improvement, this process can be used in scaled-up facilities for a simultaneous renewable building block and fuel production.

Seagrass-based platform strategies for sustainable hydroxymethylfurfural (HMF) production: toward bio-based chemical products

Today, sustainable chemistry is a key trend in the chemical manufacturing industry due mainly to concerns over the global environment and resource security. In sustainable chemical manufacture, the choice of a bio-based feedstock plays a pivotal pillar. In terms of feedstock utilization for producing HMF, which is a multivalent platform intermediate easily convertible to valuable chemical products; biopolymers, biofuels, and other important chemicals, seagrass biomasses can be more favorable feedstocks compared with land plant resources due primarily to easy availability and no systematic farming. Moreover, seagrass feedstocks could contribute cost-effectively and sustainably producing HMF by exploiting the beach-cast seagrasses on seagrass-prairies with no feedstock cost, indicating that seagrass biomasses could be a most promising biofeedstock source for sustainable HMF production. We afford a platform bioprocessing technology that has not been attempted before for sustainable HMF production using raw seagrass biomass. This bioprocess can be operated by simple reaction conditions using inorganic Brønsted acids (mainly HCl) and ionic liquid solvents at relatively low temperatures (120-130 °C). In addition, some bioengineering strategies for improving the growth of seagrass biomass and the quantity/quality of nonstructural carbohydrates (starch, sucrose) that can be used as the feeding substrates for HMF production are also discussed. The main aim of this review is to provide some important information about breakthrough bio/technologies conducive to cost-effective and sustainable HMF production.

The Increasing Value of Biomass: Moving From C6 Carbohydrates to Multifunctionalized Building Blocks via 5-(hydroxymethyl)furfural

Recent decades have been marked by enormous progress in the field of synthesis and chemistry of 5-(hydroxymethyl)furfural (HMF), an important platform chemical widely recognized as the "sleeping giant" of sustainable chemistry. This multifunctional furanic compound is viewed as a strong link for the transition from the current fossil-based industry to a sustainable one. However, the low chemical stability of HMF significantly undermines its synthetic potential. A possible solution to this problem is synthetic diversification of HMF by modifying it into more stable multifunctional building blocks for further synthetic purposes.

Securing a furan-based biorefinery: disclosing the genetic basis of the degradation of hydroxymethylfurfural and its derivatives in the model fungus Aspergillus nidulans

Hydroxymethylfurfural (HMF) is a promising lignocellulosic-derived source for the generation of diverse chemical building blocks constituting an alternative to fossil fuels. However, it remains unanswered if ubiquitous fungi can ensure their efficient decay, similar to that observed in highly specialised fungi. To disclose the genetic basis of HMF degradation in aspergilli, we performed a comprehensive analysis of Aspergillus nidulans ability to tolerate and to degrade HMF and its derivatives (including an HMF-dimer). We identified the degradation pathway using a suite of metabolomics methods and showed that HMF was modified throughout sequential reactions, ultimately yielding derivatives subsequently channelled to the TCA cycle. Based on the previously revealed hmfFGH gene cluster of Cupriavidus basilensis, we combined gene expression of homologous genes in Aspergillus nidulans and functional analyses in single-deletion mutants. Results were complemented with orthology analyses across the genomes of twenty-five fungal species. Our results support high functional redundancy for the initial steps of the HMF degradation pathway in the majority of the analysed fungal genomes and the assignment of a single-copy furan-2,5-dicarboxylic acid decarboxylase gene in A. nidulans. Collectively our data made apparent the superior capacity of aspergilli to mineralise HMF, furthering the environmental sustainability of a furan-based chemistry.

Hydrothermal polymerization towards fully biobased polyazomethines

Microwave assisted polycondensation for the synthesis of (partially) biobased polyazomethines in water (hydrothermal polymerization) was investigated for the first time in this study. The polyazomethines prepared via this environmentally friendly and simple method show comparable characteristics as the polymers prepared via traditional methods in organic solvents.

The Influence of the Gold Particle Size on the Catalytic Oxidation of 5-(Hydroxymethyl)furfural

For the production of chemicals from biomass, new selective processes are required. The selective oxidation of 5-(Hydroxymethyl)furfural (HMF), a promising platform molecule in fine chemistry, to 2,5-furandicarboxylic acid (FDCA) is considered a promising approach and requires the oxidation of two functional groups. In this study, Au/ZrO2 catalysts with different mean particle sizes were prepared by a chemical reduction method using tetrakis(hydroxymethyl)phosphonium chloride (THPC) and tested in HMF oxidation. The catalyst with the smallest mean particle size (2.1 nm) and the narrowest particle size distribution was highly active in the oxidation of the aldehyde moiety of HMF, but less active in alcohol oxidation. On the other hand, increased activity in FDCA synthesis up to 92% yield was observed over catalysts with a larger mean particle size (2.7 nm), which had a large fraction of small and some larger particles. A decreasing FDCA yield over the catalyst with the largest mean particle size (2.9 nm) indicates that the oxidation of both functional groups require different particle sizes and hint at the presence of an optimal particle size for both oxidation steps. The activity of Au particles seems to be influenced by surface steps and H bonding strength, the latter particularly in aldehyde oxidation. Therefore, the presence of both small and some larger Au particles seem to give catalysts with the highest catalytic activity.

Pd/Au Based Catalyst Immobilization in Polymeric Nanofibrous Membranes via Electrospinning for the Selective Oxidation of 5-Hydroxymethylfurfural

Innovative nanofibrous membranes based on Pd/Au catalysts immobilized via electrospinning onto different polymers were engineered and tested in the selective oxidation of 5-(hydroxymethyl)furfural in an aqueous phase. The type of polymer and the method used to insert the active phases in the membrane were demonstrated to have a significant effect on catalytic performance. The hydrophilicity and the glass transition temperature of the polymeric component are key factors for producing active and selective materials. Nylon-based membranes loaded with unsupported metal nanoparticles were demonstrated to be more efficient than polyacrylonitrile-based membranes, displaying good stability and leading to high yield in 2,5-furandicarboxylic acid. These results underline the promising potential of large-scale applications of electrospinning for the preparation of catalytic nanofibrous membranes to be used in processes for the conversion of renewable molecules.

One-Pot Enzyme Cascade for Controlled Synthesis of Furancarboxylic Acids from 5-Hydroxymethylfurfural by H2 O2 Internal Recycling

Furancarboxylic acids are promising biobased building blocks in pharmaceutical and polymer industries. In this work, dual-enzyme cascade systems composed of galactose oxidase (GOase) and alcohol dehydrogenases (ADHs) are constructed for controlled synthesis of 5-formyl-2-furancarboxylic acid (FFCA) and 2,5-furandicarboxylic acid (FDCA) from 5-hydroxymethylfurfural (HMF), based on the catalytic promiscuity of ADHs. The byproduct H₂ O₂ , which is produced in GOase-catalyzed oxidation of HMF to 2,5-diformylfuran (DFF), is used for horseradish peroxidase (HRP)-mediated regeneration of the oxidized nicotinamide cofactors for subsequent oxidation of DFF promoted by an ADH, thus implementing H₂ O₂ internal recycling. The desired products FFCA and FDCA are obtained with yields of more than 95 %.

Co-production of xylooligosaccharides and fermentable sugars from poplar through acetic acid pretreatment followed by poly (ethylene glycol) ether assisted alkali treatment

A novel combined pretreatment process of poplar sawdust was established in this study based on the sequential acetic acid and alkali treatment with poly (ethylene glycol) diglycidyl ether (PEGDE). Effects of each treatment step on chemical composition, cellulose accessibility, and enzymatic digestibility of poplar sawdust was investigated. Acetic acid pretreatment remarkably increased cellulose accessibility while also producing a relatively high quantity of xylooligosaccharides (XOS) (37.6% of raw xylan). However, enzymatic digestibility remained low (28.3%) despite hemicellulose disruption. Post alkali treatment was next applied, leading to improvement on cellulose accessibility and enzymatic hydrolysis. Enzymatic hydrolysis was improved more significantly by successive alkali treatment with PEGDE. Its potential mechanisms attributable to enzymatic hydrolysis improvement were explored by revealing the changes to lignin properties. This work successfully demonstrated that recalcitrant waste woody biomass can be biorefined into both high-value XOS as well as relatively high yield of fermentable sugars.

Solvent issues in the Baylis-Hillman reaction of 5-hydroxymethyl furfural (HMF) and 5-glucosyloxymethyl furfural (GMF). Towards no-solvent conditions

The possibility to apply solventless conditions for the Baylis-Hillman reaction of 5-hydroxymethyl furfural (HMF) and its glucosylated analog, glucosyloxymethyl furfural (GMF) has been investigated. This study shows that highly functionalized adducts can be obtained in fair to good yields, under the conditions combining the renewability of the substrates, the straightforwardness of the strategy, and the lowered cost and toxicity of the solvent conditions. The issue of the polarity of the furanic substrate is addressed by comparing HMF with furfural and GMF.

Task-Specific Organic Salts and Ionic Liquids Binary Mixtures: A Combination to Obtain 5-Hydroxymethylfurfural From Carbohydrates

The increase in energy demand and depletion of fossil fuels are among major issues of modern society. Valorization and transformation of raw materials in products of industrial value represent a challenge. This justifies the growing interest of scientific research toward the identification of suitable media and methodologies able to pursue above goals, paying attention to matter of sustainability. On this subject, we studied sulfonic-acid functionalized diimidazolium salts as catalysts for the conversion of fructose and sucrose to 5-hydroxymethylfurfural (5-HMF) in an ionic liquid mixture. In general, using these salts allowed us to obtain 5-HMF in good yields from both substrates in mild conditions. Indeed, at 60°C and in the presence of 20 mol% of catalyst, 5-HMF yields of 60 and 30% were obtained from fructose and sucrose, respectively. The catalytic system was recycled and used up to six times observing no appreciable loss in yield for the first four cycles. Moreover, we gathered mechanistic information by in situ 1H NMR monitoring the dehydration of fructose. To dissect the role of acidity on the reaction, we determined the Hammett acidity function of each salt. Comparison of these results with yields and reactivity observed in the presence of related monocationic salts and with a dicationic salt bearing only one sulfonic acid group, allowed stating that the reactivity observed is the result of the combined action of acidity and structural features of the catalysts. Overall, the approach proposed here could contribute to pave the way to increase sustainability in the raw material valorization processes.

Co-Polymers based on Poly(1,4-butylene 2,5-furandicarboxylate) and Poly(propylene oxide) with Tuneable Thermal Properties: Synthesis and Characterization

Poly(ether ester)s (PEEs) represent a promising class of segmented co-polymers, nevertheless the synthesis of PEEs based on renewable 2,5-furandicarboxylic acid (FDCA) is still scarce. In this context, a series of poly(1,4-butylene 2,5-furandicarboxylate)-co-poly(poly(propylene oxide) 2,5-furandicarboxylate) co-polyesters with different composition of stiff poly(1,4-butylene 2,5-furandicarboxylate) (PBF) and soft poly(poly(propylene oxide) 2,5-furandicarboxylate) (PPOF) moieties were synthesized, via a two-step bulk polytransesterification reaction. The molar ratio of PBF/PPOF incorporated was varied (10 to 50 mol%) in order to prepare several novel materials with tuned properties. The materials were characterised in detail through several techniques, namely ATR FTIR, ¹H and 13C NMR, TGA, DSC, DMTA and XRD. Their hydrolytic and enzymatic degradation evaluation was also assessed. These new co-polymers showed either a semi-crystalline nature when higher PBF/PPOF ratios were used, and for approximately equal amounts of PBF and PPOF an amorphous co-polyester was obtained instead.

Selective Oxidation of HMF via Catalytic and Photocatalytic Processes Using Metal-Supported Catalysts

In this study, 5-hydroxymethylfurfural (HMF) oxidation was carried out via both the catalytic and the photocatalytic approach. Special attention was devoted to the preparation of the TiO₂-based catalysts, since this oxide has been widely used for catalytic and photocatalytic application in alcohol oxidation reactions. Thus, in the catalytic process, the colloidal heterocoagulation of very stable sols, followed by the spray-freeze-drying (SFD) approach, was successfully applied for the preparation of nanostructured porous TiO₂-SiO₂ mixed-oxides with high surface areas. The versatility of the process made it possible to encapsulate Pt particles and use this material in the liquid-phase oxidation of HMF. The photocatalytic activity of a commercial titania and a homemade oxide prepared with the microemulsion technique was then compared. The influence of gold, base addition, and oxygen content on product distribution in the photocatalytic process was evaluated.

Aerobic Oxidation and Oxidative Esterification of 5-Hydroxymethylfurfural by Gold Nanoparticles Supported on Nanoporous Polymer Host Matrix

The aerobic oxidation and oxidative esterification of 5-hydroxymethylfurfural (HMF) catalyzed by gold nanoparticles (AuNPs) supported on a semicrystalline nanoporous multiblock copolymer matrix consisting of syndiotactic poly(styrene)-cis-1,4-poly(butadiene) (sPSB) have been investigated. Depending on the reaction parameters (support nanoporosity, presence of water, solvent, temperature, cocatalyst, oxygen pressure), the conversion of HMF can be finely addressed to the formation of the desired oxidation product, such as 2,5-diformylfuran (DFF), 5-formylfuran-2-carboxylic acid (FFCA), methyl 5-(hydroxymethyl)furan-2-carboxylate (MHMFC), dimethyl furan-2,5-dicarboxylate (DMFC), and furan-2,5-dicarboxylic acid (FDCA), under optimized reaction conditions. The AuNP-sPSB catalyst is highly effective and selective because the polymer support acts as a conveyor and concentrator of the reactants toward the catalytic sites.

Improved synthesis of 2,5-bis(hydroxymethyl)furan from 5-hydroxymethylfurfural using acclimatized whole cells entrapped in calcium alginate

Upgrading of biomass-derived 5-hydroxymethylfurfural (HMF) has attracted considerable interest recently. In this work, efficient synthesis of 2,5-bis(hydroxymethyl)furan (BHMF) from HMF was reported with the acclimatized Meyerozyma guilliermondii SC1103 cells entrapped in calcium alginate beads. Catalytic activities of the cells as well as their HMF-tolerant level increased significantly upon acclimatization and immobilization. BHMF was obtained within 7-24 h with good yields (82-85%) and excellent selectivities (99%) when the substrate concentrations were 200-300 mM. In scale-up synthesis, BHMF of up to 181 mM was produced within 7 h, and its productivity was approximately 3.3 g/L h. In addition, the immobilized biocatalyst showed satisfactory operational stability; the cell viability of 70% was retained after reuse 4 times. With rice straw hydrolysate as co-substrate, both the reaction rate and selectivity decreased, likely due to the deleterious influence of xylose in the hydrolysate.