Azobenzene-Containing Block Copolymers as Light-Induced Reworkable Adhesives: Effects of Molecular Weight, Composition, and Block Copolymer Architectures on the Adhesive Properties

Photoresponsive heparin ionic complexes toward controllable therapeutic efficacy of anticoagulation

Controllable heparin-release is of great importance and necessity for the precise anticoagulant regulation. Efforts have been made on designing heparin-releasing systems, while, it remains a great challenge for gaining the external-stimuli responsive heparin-release in either intravenous or catheter delivery. In this study, an azobenzene-containing ammonium surfactant is designed and synthesized for the fabrication of photoresponsive heparin ionic complexes through the electrostatic complexation with heparin. Under the assistance of photoinduced trans-cis isomerization of azobenzene, the obtained heparin materials perform reversible athermal phase transition between ordered crystalline and isotropic liquid state at room temperature. Compared to the ordered state, the formation of isotropic state can effectively improve the dissolving of heparin from ionic materials in aqueous condition, which realizes the photo-modulation on the concentration of free heparin molecules. With good biocompatibility, such a heparin-releasing system addresses photoresponsive anticoagulation in both in vitro and in vivo biological studies, confirming its great potential clinical values. This work provides a new designing strategy for gaining anticoagulant regulation by light, also opening new opportunities for the development of photoresponsive drugs and biomedical materials based on biomolecules.

Photoliquefiable Azobenzene Surfactants toward Solar Thermal Fuels that Upgrade Photon Energy Storage via Molecular Design

Photoresponsive phase change materials (PPCMs) are capable of storing photon and heat energy simultaneously and releasing the stored energy as heat in a controllable way. While, the azobenzene-based PPCMs exhibit a contradiction between gravimetric energy storage density and photoinduced phase change. Here, a type of azobenzene surfactants with balance between molecular free volume and intermolecular interaction is designed in molecular level, which can address the coharvest of photon energy and low-grade heat energy at room temperature. Such PPCMs gain the total gravimetric energy density up to 131.18 J g^-1 by charging solid sample and 160.50 J g^-1 by charging solution. Notably, the molar isomerization enthalpy upgrades by a factor of up to 2.4 compared to azobenzene. The working mechanism is explained by the computational studies. All the stored energy can release out as heat under Vis light, causing a fast surface temperature rise. This study demonstrates a new molecular designing strategy for developing azobenzene-based PPCMs with high gravimetric energy density by improving the photon energy storage.

Smart Responsive Azo-Copolymer with Photoliquefaction for Switchable Adhesive Application

The development and utilization of switchable adhesives are considered to be an essential target to solve the problems of their separation and recycling in some specific service environments, such as the preparation or repair process of electronic devices. Intelligent materials with controllable phase transition are utilized to fabricate switchable adhesives because of the significantly diverse adhesion strengths in different phase states. Photoresponsive azobenzene and its derivatives usually possess different melting temperatures (T_m) or/and glass transition temperatures (T_g) of the cis-trans isomers, which are beneficial to making the photoinduced solid-liquid phase transition for switchable adhesive application possible. Here, a novel three-component azo-copolymer (PNIM-Azo) with fast and reversible photoinduced solid-liquid phase transition has been designed and synthesized. PNIM-Azo possesses reversible bonding/debonding processes, resulting from the different adhesion strengths between trans-configuration PNIM-Azo in the solid state and cis-configuration in the liquid state. Moreover, by incorporating commercialized 2-methoxyethyl acrylate and N-isopropylacrylamide with O and N heteroatoms into the copolymer, the trans-configuration PNIM-Azo possesses the highest adhesion strength (∼11 MPa between two glass substrates) among all of the reported azobenzene-based switchable adhesives, which could be attributed to the increase in the entanglement effect because of the H-bond in the polymer chains formed by introducing heteroatoms. Our synthesized PNIM-Azo copolymer provides an alternative for designing and developing switchable adhesives with high adhesion strength for some electronic production processes.

Disordered Low Molecular Weight Spiropyran Exhibiting Photoregulated Adhesion Ability

The functions of the materials composed of small molecules are highly dependent on their ordered molecular arrangements in both natural and artificial systems. Without ordered structure, small molecules hardly gain complicated functions, due to the absence of intermolecular covalent bond connection or strong network. Here, a low molecular weight spiropyran that could exhibit attractive photochromism and powerful adhesion property in disordered solid state is demonstrated. With maximum up to ∼8 MPa, the adhesion strength could be photoregulated in multiple levels, which also shows one-to-one correspondence to the specific color state. The working mechanism analysis on the photoregulated adhesion reveals that the isomer ratio of merocyanine form and the molecular packing density of spiropyran are the determining factors for the adhesion ability. The discovery of photoregulated adhesion from pure spiropyran provides a new strategy for developing functional materials by employing low molecular weight compounds.

Thermodynamic stability of cis-azobenzene containing DNA materials based on van der Waals forces

Taking advantage of van der Waals forces, an azobenzene-containing surfactant with a stable cis-state was designed and synthesized to fabricate photoresponsive DNA material. The reported DNA material exhibited reversible liquid crystalline-to-isotropic liquid transition under UV/Vis illuminations via the trans-cis isomerization of azobenzene. It also gained the ability to maintain the isotropic liquid state after UV light had ceased thanks to the thermodynamic stability of the cis-isomer of the azobenzene-containing surfactant. This work provides a design strategy for fabricating photoresponsive phase-change biomaterials.

Rapid Photoresponsive Switchable Pressure-Sensitive Adhesive Containing Azobenzene for the Mini-Light Emitting Diode Transfer Process

Materials that can switch adhesive properties based on external stimuli are required in several industries for temporary bonding or transfer processes. Previously studied materials achieve this under restricted conditions (hydration, heat, and long switching times), and some materials have limitations related to reuse because of irreversible reactions or residue formation on substrates. Herein, a rapid photoresponsive switchable pressure-sensitive adhesive (PSA) fabricated using an acrylic polymer and an aliphatic monomer containing azobenzene is reported. The adhesion force of the proposed PSA can be switched by photoisomerizing the azobenzene moiety. The process induces the transition of surface energy and modulus of the PSA. Ultraviolet and visible light irradiation can switch the probe tack force from 200 to 4 kPa within 15-30 s. Adhesion switching is possible in a state wherein the PSA remains adhered to a substrate. Mini-LEDs are selectively transferred from the carrier PSA to a polydimethylsiloxane substrate following the process of partial adhesion switching of the PSA. The novel and switchable PSA, which exhibits a selective and repeatable adhesion switching property and high switching ratio when stimulated by light stimuli, may be potentially used to realize the mini-LED or micro-LED transfer processes.

Photoliquefiable DNA-surfactant ionic crystals: Anhydrous self-healing biomaterials at room temperature

Development of photoliquefiable solid-state biomaterials at room temperature would address scientific challenges in life science. However, external stimuli-induced phase transitions are difficult for some biomacromolecules based materials, due to the high rigidity of these biomolecules. In this present work, by delicate molecule design on azobenzene-type ammonium surfactants, two new types of DNA-surfactant materials are fabricated. At room temperature, these DNA materials show photoliquefaction of ionic crystals to isotropic liquids under UV light, and fast self-assembly from isotropic liquids back to crystals after ceasing UV light, under the assistance of azobenzene isomerization. To achieve this objective, the designed solid-state DNA materials should have melting points near room temperature and an immediate liquid crystal to isotropic liquid transition process just above the melting points, which highly depends on the stoichiometric charge ratio between DNA and surfactants. As proved by the successful self-healing tests, these DNA ionic crystals are good biomaterials with potential applications in biomedicine and life science. This work would provide a new strategy for designing anhydrous functional biomaterials at room temperature by using rigid biomacromolecules. STATEMENT OF SIGNIFICANCE: At room temperature, solid-state biomaterials with photoregulated crystal⇄isotropic liquid phase transition property are attractive functional materials in life science, considering the body temperature and living environment temperature of human beings. Although several kinds of anhydrous materials achieved isothermal photoresponsive phase transitions, the photoregulated phase transition of anhydrous biomacromolecules based materials has not been achieved at room temperature, due to the high rigidity of these biomolecules. In this work, by delicate molecule design on ammonium surfactants, we synthesized two kinds of anhydrous DNA-surfactants ionic crystals. These DNA materials show fast photoliquefaction under UV light and self-assembly after ceasing light, which affords excellent self-healing biomaterials. This work would provide a new strategy for designing anhydrous photoresponsive biomaterials by using rigid biomacromolecules.

Rapid Photoswitching of Low Molecular Weight Arylazoisoxazole Adhesives

Adhesion is one of the most ubiquitous practical applications at surfaces. With today's society calling increasingly for more reusable and "green" alternatives, the demand for readily reversible adhesives has triggered many studies into this field, in particular by incorporating molecular photoswitches into composite materials. Responsive polymers can act as reversible adhesives, but their employment brings about synthetic drawbacks and challenges in reproducibility and reusability. Here, our results demonstrate that even a low molecular weight photoswitch can serve as an on-demand adhesive when the intermolecular interactions are sufficiently strong. We show that readily accessible arylazoisoxazoles display a fast photoreversible solid-to-liquid phase transition and perform as excellent photoreversible adhesives, with a remarkable durability over 10 immediate reuse cycles without a loss in adhesive strength or an increase in the unprecedented response time. Furthermore, the versatility of photoreversible adhesion is shown at various surfaces ranging from polymeric materials to metals, demonstrating a wide field of potential application.

A new visible light and temperature responsive diblock copolymer

A visible light and temperature responsive diblock copolymer of poly[6-(2,6,2′,6′-tetramethoxy-4′-oxyazobenzene) hexyl methacrylate]-block-poly(N-isopropylacrylamide) (PmAzo-b-PNIPAM) was synthesized via RAFT polymerization by carefully tuning the polymerization conditions.