Impact-specific essential work of fracture of maleic anhydride-compatibilized polypropylene/elastomer blends and their composites

The Role of Multiwalled Carbon Nanotubes in the Mechanical, Thermal, Rheological, and Electrical Properties of PP/PLA/MWCNTs Nanocomposites

Polypropylene/polylactic acid (PP/PLA) blend (10–40% of PLA) and PP/PLA/MWCNTs nanocomposites (0.5, 1, and 2 wt% of MWCNTs) were prepared via melt compounding. Scanning electron microscopy revealed a co-continuous PLA phase in the PP/PLA blends with high PLA content. Moreover, the addition of 2 wt% multi-walled carbon nanotubes (MWCNTs) increased the tensile modulus and tensile strength of the PP/PLA40% by 60% and 95%, respectively. A conductive network was found with the addition of 2 wt% MWCNTs, where the electrical conductivity of the PP/PLA increased by nine orders of magnitude. At 2 wt% MWCNTs, a solid network within the composite was characterized by rheological assessment, where the composite turned from nonterminal to terminal behavior. Soil burial testing of the PP/PLA blend within 30 days in natural humus compost soil featured suitable biodegradation, which indicates the PP/PLA blend is as an appropriate candidate for food packing applications.

Polypropylene/Short Glass Fibers Composites: Effects of Coupling Agents on Mechanical Properties, Thermal Behaviors, and Morphology

This study uses the melt compounding method to produce polypropylene (PP)/short glass fibers (SGF) composites. PP serves as matrix while SGF serves as reinforcement. Two coupling agents, maleic anhydride grafted polypropylene, (PP-g-MA) and maleic anhydride grafted styrene-ethylene-butylene-styrene block copolymer (SEBS-g-MA) are incorporated in the PP/SGF composites during the compounding process, in order to improve the interfacial adhesion and create diverse desired properties of the composites. According to the mechanical property evaluations, increasing PP-g-MA as a coupling agent provides the composites with higher tensile, flexural, and impact properties. In contrast, increasing SEBS-g-MA as a coupling agent provides the composites with decreasing tensile and flexural strengths, but also increasing impact strength. The DSC results indicate that using either PP-g-MA or SEBS-g-MA as the coupling agent increases the crystallization temperature. However, the melting temperature of PP barely changes. The spherulitic morphology results show that PP has a smaller spherulite size when it is processed with PP-g-MA or SEBS-g-MA as the coupling agent. The SEM results indicate that SGF is evenly distributed in PP matrices, but there are distinct voids between these two materials, indicating a poor interfacial adhesion. After PP-g-MA or SEBS-g-MA is incorporated, SGF can be encapsulated by PP, and the voids between them are fewer and indistinctive. This indicates that the coupling agents can effectively improve the interfacial compatibility between PP and SGF, and as a result improves the diverse properties of PP/SGF composites.

Simultaneous improvement of strength and toughness in fiber reinforced isotactic polypropylene composites by shear flow and a β-nucleating agent

Glass fiber reinforced isotactic polypropylene composites with specific skin–core structure demonstrate simultaneous improvement of strength and toughness.