Single-Component Hydrophilic Terpolymer Thin Film Systems for Imparting Surface Chemical Versatility on Various Substrates

We demonstrate a single-component hydrophilic photocrosslinkable copolymer system that incorporates all critical functionalities into one chain. This design allows for the creation of uniform functional organic coatings on a variety of substrates. The copolymers were composed of a poly(ethylene oxide)-containing monomer, a monomer that can release a primary amine upon UV light, and a monomer with reactive epoxide or cyclic dithiocarbonate with a primary amine. These copolymers are easily incorporated into the solution-casting process using polar solvents. Furthermore, the resulting coating can be readily stabilized through UV light-induced crosslinking, providing an advantage for controlling the surface properties of various substrates. The photocrosslinking capability further enables us to photolithographically define stable polymer domains in a desirable region. The resulting copolymer coatings were chemically versatile in immobilizing complex molecules by (i) post-crosslinking functionalization with the reactive groups on the surface and (ii) the formation of a composite coating by mixing varying amounts of a protein of interest, i.e., fish skin gelatin, which can form a uniform dual crosslinked network. The number of functionalization sites in a thin film could be controlled by tuning the composition of the copolymers. In photocrosslinking and subsequent functionalizations, we assessed the reactivity of the epoxide and cyclic dithiocarbonate with the generated primary amine. Moreover, the orthogonality of the possible reactions of the presented reactive functionalities in the crosslinked thin films with complex molecules is assessed. The resulting copolymer coatings were further utilized to define a hydrophobic surface or an active surface for the adhesion of biological objects.

Pd-catalyzed intermolecular consecutive double Heck reaction "on water" under air: facile synthesis of substituted indenes

An efficient and environmentally benign method for the preparation of substituted indene derivatives has been developed by using water as the sole solvent. This reaction proceeded under air, tolerated a wide range of functional-groups and was easily scaled up. Bioactive natural products like indriline were synthesized via the developed protocol. Preliminary results demonstrate that the enantioselective variant can also be achieved.

DNA-caged nanoparticles via electrostatic self-assembly

DNA-modified nanoparticles enable DNA sensing and therapeutics in nanomedicine and are also crucial for nanoparticle self-assembly with DNA-based materials. However, methods to conjugate DNA to nanoparticle surfaces are limited, inefficient, and lack control. Inspired by DNA tile nanotechnology, we demonstrate a new approach to nanoparticle modification based on electrostatic attraction between negatively charged DNA tiles and positively charged nanoparticles. This approach does not disrupt nanoparticle surfaces and leverages the programmability of DNA nanotechnology to control DNA presentation. We demonstrated this approach using a vareity of nanoparticles, including polymeric micelles, polystyrene beads, gold nanoparticles, and superparamagnetic iron oxide nanoparticles with sizes ranging from 5-20 nm in diameter. DNA cage formation was confirmed through transmission electron microscopy (TEM), neutralization of zeta potential, and a series of fluorescence experiments. DNA cages present "handle" sequences that can be used for reversible target attachment or self-assembly. Handle functionality was verified in solution, at the solid-liquid interface, and inside fixed cells, corresponding to applications in biosensing, DNA microarrays, and erasable immunocytochemistry. These experiments demonstrate the versatility of the electrostatic DNA caging approach and provide a new pathway to nanoparticle modification with DNA that will empower further applications of these materials in medicine and materials science.

Adaptive 2D and Pseudo-2D Systems: Molecular, Polymeric, and Colloidal Building Blocks for Tailored Complexity

Two-dimensional and pseudo-2D systems come in various forms. Membranes separating protocells from the environment were necessary for life to occur. Later, compartmentalization allowed for the development of more complex cellular structures. Nowadays, 2D materials (e.g., graphene, molybdenum disulfide) are revolutionizing the smart materials industry. Surface engineering allows for novel functionalities, as only a limited number of bulk materials have the desired surface properties. This is realized via physical treatment (e.g., plasma treatment, rubbing), chemical modifications, thin film deposition (using both chemical and physical methods), doping and formulation of composites, or coating. However, artificial systems are usually static. Nature creates dynamic and responsive structures, which facilitates the formation of complex systems. The challenge of nanotechnology, physical chemistry, and materials science is to develop artificial adaptive systems. Dynamic 2D and pseudo-2D designs are needed for future developments of life-like materials and networked chemical systems in which the sequences of the stimuli would control the consecutive stages of the given process. This is crucial to achieving versatility, improved performance, energy efficiency, and sustainability. Here, we review the advancements in studies on adaptive, responsive, dynamic, and out-of-equilibrium 2D and pseudo-2D systems composed of molecules, polymers, and nano/microparticles.

Oxidation of quantum dots encapsulated in block copolymer micelles as a function of polymer terminal charge

Most high-quality quantum dots (QDs) are synthesized in the organic phase, and are often coated with polymers for use in aqueous biological environments. QDs can exhibit fluorescence losses during phase transfer, but evaluating underlying mechanisms (e.g., oxidation, surface etching, loss of colloidal stability) can be challenging because of variation in synthesis methods. Here, fluorescence stability of QDs encapsulated in block co-polymer (BCP) micelles was investigated as a function of BCP terminal functionalization (i.e., -OH, -COOH, and -NH₂ groups) and synthesis method (i.e., electrohydrodynamic emulsification-mediated selfassembly (EE-SA), sonication, and manual shaking). Fluorescence losses, fluorescence intensity, energy spectra, and surface composition were assessed using spectrofluorometry and cathodoluminescence spectroscopy (CL) with integrated X-ray photoemission spectroscopy (XPS). QDs passivated using charged BCPs exhibited 50-80% lower fluorescence intensity than those displaying neutral groups (e.g., -OH), which CL/XPS revealed to result from oxidation of surface Cd to CdO. Fluorescence losses were higher for processes with slow formation speed, but minimized in the presence of poly(vinyl alcohol) (PVA) surfactant. These data suggest slower BCP aggregation kinetics rather than electrostatic chain repulsion facilitated QD oxidation. Thus, polymer coating method and BCP structure influence QD oxidation during phase transfer and should be selected to maximize fast aggregation kinetics.

Voltammetric Determination of Hg2+, Zn2+, and Pb2+ Ions Using a PEDOT/NTA-Modified Electrode

A novel electrochemical sensor for determining trace levels of Hg²⁺, Pb²⁺, and Zn²⁺ ions in water using square wave voltammetry (SWV) is reported. The sensor is based on a platinum electrode (Pt) modified by poly(3,4-ethylenedioxythiophene) and N _α,N _α-bis-(carboxymethyl)-l-lysine hydrate (NTA lysine) PEDOT/NTA. The modified electrode surface (PEDOT/NTA) was prepared via the introduction of the lysine-NTA group to a PEDOT/N-hydroxyphthalimide NHP electrode. The (PEDOT/NTA) was characterized via cyclic voltammetry (CV), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). The effects of scan rates on the electrochemical properties of the polymer electrode were also investigated. The electrochemical results were used to estimate the coverage of the electrode polymer surface and its electrostability in background electrolyte solutions. Several analytical parameters, such as polymer film thickness, metal deposition time, and pH of the electrolyte, were examined. Linear responses to Hg²⁺, Pb²⁺, and Zn²⁺ ions in the concentration range of 5-100 μg L^-1 were obtained. The limits of detection (LODs) for the determination of Hg²⁺, Pb²⁺, and Zn²⁺ ions were 1.73, 2.33, and 1.99 μg L^-1, respectively. These promising results revealed that modified PEDOT/NTA films might well represent an important addition to existing electrochemical sensor technologies.

Distribution of block copolymers in drying polymer films

HYPOTHESIS

Block copolymers (BCP) consisting of a polar block and a surface active apolar block are widely used for surface functionalization of polymer films. The characteristics of the copolymer blocks determine whether surface segregation and/or phase separation occurs, for a given bulk mixture. This data can be used to find the optimal BCP composition where high surface enrichment is obtained without accumulation of phase separated BCP in the bulk.

METHODS

The distribution of poly(ethylene oxide)-polydimethylsiloxane (PEO-PDMS) BCP in a polymer formulation relevant for coating applications is systematically investigated. The surface segregation is studied in liquid formulations with surface tension measurements and dried films with X-ray photoelectron spectroscopy (XPS), whereas phase separation is quantified using turbidity measurements. The results are compared with Scheutjens-Fleer self-consistent field (SF-SCF) computations, which are also applied to determine the effect of film drying on BCP phase stability and surface segregation.

FINDINGS

Longer PDMS blocks result in lower interfacial tension of the liquid polymer mixture, whereas for the cured films, the largest PDMS concentration at the interface was obtained for intermediate PDMS block lengths. This is explained by the observation that phase separation already occurs at very low BCP concentrations for long PDMS blocks. The SCF predictions qualitatively agree with the experimental results and reveal that the BCP distribution changes significantly during film drying.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Water-Resistant Surface Modification of Hydrophobic Polymers with Water-Soluble Surfactant Additives

Water-soluble nonionic surfactant, pentaethylene glycol monododecyl ether, C₁₂E₅, spontaneously blooms to the surface of spin-cast hydrophobic polyisoprenes, generating hydrophilic surfaces. This system provides a simple model for hydrophilic chemical modification of rubbery polymers that demonstrates surprisingly rich, complex, and unexpected behaviour. The vertical depth profiles were quantified using neutron reflectometry (NR) using a novel procedure to account for undulations in the film thickness. Surface properties were characterized using contact angle analysis and atomic force microscopy (AFM). Despite the low surface tension of the toluene solvent used in film preparation and the low surface energy of the polyisoprene (PI) matrix, NR depth profiles revealed clear evidence of surfactant segregation. This surface layer was typically thicker than a monolayer, but incomplete, yet was remarkably stable with respect to dissolution, even when exposed to hundreds of thousands of times the volume of water required to dissolve all the surfactant on the surface. Despite the apparent resistance to removal from the surface, water exposure does alter the subsequent wettability of the surface, with a hydrophilic-to-hydrophobic transition occurring after rinsing. Complementary AFM images of these C₁₂E₅/cis-PI films showed unexpected strand-like features on the surface of the film, which we attribute to a non-uniform lateral distribution of some of the surfactant. This surface structure becomes more evident after rinsing, and it appears that there are two distinct populations of surfactant on the PI film surface. We conclude that some of the bloomed surfactant exists as layers, which are relatively inert with respect to rinsing or surface modification, and some is laterally inhomogeneous. This latter population is primarily responsible for surface wetting behaviour but is not detected by specular NR.

Catalyst-free and additive-free reactions enabling C-C bond formation: a journey towards a sustainable future

This review focuses on the catalyst- and additive-free C-C bond forming reactions reported mostly from the year 2005 to date. C-C bond forming reactions are highly important as large and complex organic molecules can be derived from simpler ones via these reactions. On the other hand, catalyst- and additive-free reactions are economical, environmentally friendly and less sensitive to air/moisture, allow easy separation of products and are operationally simple. Hence, a large number of research articles have been published in this area. Though a few reviews are available on the catalyst-free organic reactions, most of them were published a few years ago. The current review excludes catalysts as well as additives and is specific to only C-C bond formation. Besides many organic name reactions, catalyst/additive-free C-H functionalizations, coupling reactions and UV-visible-light-promoted reactions are also discussed. Undoubtedly, the contents of this review will motivate readers to do more novel work in this area which will accelerate the journey towards a sustainable future.

Hybrid polyurethanes composed of isobutyl-substituted open-cage silsesquioxane in the main chains: synthesis, properties and surface segregation in a polymer matrix

The resulting polyurethanes exhibited excellent optical transparency and surface hydrophobicity and acted as effective surface modifiers in poly(methyl methacrylate) (PMMA) by surface segregation.

Oligomer/Polymer Blend Phase Diagram and Surface Concentration Profiles for Squalane/Polybutadiene: Experimental Measurements and Predictions from SAFT-γ Mie and Molecular Dynamics Simulations

The compatibility and surface behavior of squalane-polybutadiene mixtures are studied by experimental cloud point and neutron reflectivity measurements, statistical associating fluid theory (SAFT), and molecular dynamics (MD) simulations. A SAFT-γ Mie model is shown to be successful in capturing the cloud point curves of squalane-polybutadiene and squalane-cis-polybutadiene binary mixtures, and the same SAFT-γ Mie model is used to develop a thermodynamically consistent top-down coarse-grained force field to describe squalane-polybutadiene. Coarse-grained molecular dynamics simulations are performed to study surface behavior for different concentrations of squalane, with the system exhibiting surface enrichment and a wetting transition. Simulated surface profiles are compared with those obtained by fitting to neutron reflectivity data obtained from thin films composed of deuterated squalane (d-sq)-polybutadiene. The presented top-down parametrization methodology is a fast and thermodynamically reliable approach for predicting properties of oligomer-polymer mixtures, which can be challenging for either theory or MD simulations alone.

Wettability Reversal of Hydrophobic Pigment Particles Comprising Nanoscale Organosilane Shells: Concentrated Aqueous Dispersions and Corrosion-Resistant Waterborne Coatings

We demonstrate the synthesis of polysiloxane-modified inorganic-oxide nanoparticles comprising a TiO₂-based pigment (Ti-Pure R-706), which undergo drastic wettability reversal from a hydrophilic wet state to a hydrophobic state upon drying. Furthermore, the dry hydrophobic pigment particles can be reversibly converted back to a hydrophilic form by the application of high shear aqueous milling. Our synthetic approach involves first condensing the cross-linking monomer CH₃Si(OH)₃ onto the surface of Ti-Pure R-706 at pH 9.5 ± 0.2 in an aqueous suspension. After drying this surface-modified material in the presence of a polyanionic dispersant so as to preserve the primary particle size via dynamic light scattering, it is trimethylsilyl-capped with (CH₃)₃SiOH, which consumes some residual Si-OH functionalities, and washed to remove all dispersant and excess reagents. Transmission electron microscopy demonstrates a ∼6 nm polysiloxane coating uniformly surrounding the surface of the pigment particle. A 70 wt % (37 vol %) concentrated aqueous slurry of the hydrophobically modified pigment particles prepared in the absence of dispersant exhibits rheological characteristics that are nearly the same as an aqueous dispersion of native unmodified hydrophilic Ti-Pure R-706 comprising an optimal amount of the organic anionic dispersant. It is also possible to synthesize dispersions without the use of an added surfactant and/or dispersant at even higher solid concentrations of up to 75 wt % (43 vol %) in water, conditions at which even the hydrophilic native Ti-Pure R-706 oxide pigment yields a gel-like paste in the absence of a dispersant. Films prepared by drying an aqueous suspension of these pigment particles exhibited a hydrophobic contact angle of ∼125°. When acrylic-based waterborne coatings were prepared comprising these surface-modified Ti Pure R-706 pigments, they showed excellent corrosion protection of a mild steel substrate. These data point to a wettability reversal in which the particles change from hydrophobic to hydrophilic upon high-shear aqueous milling and vice versa upon drying. ²⁹Si CP/MAS NMR spectroscopy highlights the importance of flexibility of the polysiloxane coating for achieving this wettability reversal, a result that emphasizes the importance of surface reconstruction.

Suppressed Surface Reorganization in a High-Density Poly(methyl methacrylate) Brush

A high-density poly(methyl methacrylate) (PMMA) brush (σ = 0.77 chain/nm²) with a lower molecular weight distribution was prepared onto a silicon wafer by surface-initiated atom transfer radical polymerization. The surface of the PMMA brush chains was characterized upon the process of the environmental change, from air to water, using contact angle measurements in conjunction with sum-frequency generation spectroscopy. The surface structure and properties altered less with the changing environment from air to water for the PMMA brush than for a spin-coated film; that is, the extent of surface reorganization could be suppressed by grafting densely-packed chains onto a substrate. Also, the water penetration into the brush surface was inhibited because of the densely packed chain structure.

Whisky tasting using a bimetallic nanoplasmonic tongue

Metallic nanostructures are ideal candidates for optical tongue devices thanks to their chemical stability, the sensitivity of their plasmonic resonance to environmental changes, and their ease of chemical-functionalization. Here, we describe a reusable optical tongue comprising multiplexed gold and aluminum nano-arrays: a bimetallic device which produces two distinct resonance peaks for each sensing region. Through specific modification of these plasmonic arrays with orthogonal surface chemistries, we demonstrate that a dual-resonance device allows us to halve sensor sizes and data-acquisition times when compared to single-resonance, monometallic devices. We applied our bimetallic tongue to differentiate off-the-shelf whiskies with >99.7% accuracy by means of linear discriminant analysis (LDA). This advance in device miniaturization, functionalization, and multiplexed readout indicates nanoplasmonic tongues will have future applications in chemical mixture identification in applications where portability, reusability, and measurement speed are key.

Controlling Surface Segregation of a Polymer To Display Carboxy Groups on an Outermost Surface Using Perfluoroacyl Groups

Controlling the surface properties of solid polymers is important for practical applications. We here succeeded in controlling the surface segregation of polymers to display carboxy groups on an outermost surface, which allowed the covalent immobilization of functional molecules via the carboxy groups on a substrate surface. Random methacrylate-based copolymers containing carboxy groups, which were protected with perfluoroacyl (R_f) groups, were dip-coated on acrylic substrate surfaces. X-ray photoelectron spectroscopy and contact-angle measurements revealed that the R_f groups were segregated to the outermost surface of the dip-coated substrates. The R_f groups were removed by hydrolysis of the R_f esters in the copolymers, resulting in the display of carboxy groups on the surface. The quantification of carboxy groups on a surface revealed that the carboxy groups were reactive to a water-soluble solute in an aqueous solution. The surface segregation was affected by the molecular structure of the copolymer used for dip-coating.

Reversible Surface Engineering via Nitrone-Mediated Radical Coupling

Efficient and simple polymer conjugation reactions are critical for introducing functionalities on surfaces. For polymer surface grafting, postpolymerization modifications are often required, which can impose a significant synthetic hurdle. Here, we report two strategies that allow for reversible surface engineering via nitrone-mediated radical coupling (NMRC). Macroradicals stemming from the activation of polymers generated by copper-mediated radical polymerization are grafted via radical trapping with a surface-immobilized nitrone or a solution-borne nitrone. Since the product of NMRC coupling features an alkoxyamine linker, the grafting reactions can be reversed or chain insertions can be performed via nitroxide-mediated polymerization (NMP). Poly( n-butyl acrylate) ( M_n = 1570 g·mol^-1, D̵ = 1.12) with a bromine terminus was reversibly grafted to planar silicon substrates or silica nanoparticles as successfully evidenced via X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry, and grazing angle attenuated total reflection Fourier-transform infrared spectroscopy (GAATR-FTIR). NMP chain insertions of styrene are evidenced via GAATR-FTIR. On silica nanoparticles, an NMRC grafting density of close to 0.21 chains per nm² was determined by dynamic light scattering and thermogravimetric analysis. Concomitantly, a simple way to decorate particles with nitroxide radicals with precise control over the radical concentration is introduced. Silica microparticles and zinc oxide, barium titanate, and silicon nanoparticles were successfully functionalized.

Synthesis of amphiphilic ABA triblock oligomer via ATRP and its surface properties

A series of novel amphiphilic ABA-type poly(tridecafluorooctylacrylate)-poly(ethylene glycol)-poly(tridecafluorooctylacrylate) (henceforth referred to as p-TDFA-PEG-p-TDFA) triblock oligomers were successfully synthesized via atom transfer radical polymerization (ATRP) using well-defined Br-PEG-Br as macroinitiator and copper as catalyst. The block oligomers were characterized by Fourier transform infrared (FTIR) spectroscopy and 1H and 19F nuclear magnetic resonances (NMR). Gel permeation chromatography (GPC) showed that the block oligomers have been obtained with narrow molecular weight distributions of 1.22–1.33. X-ray photoelectron spectroscopy (XPS) was carried out to confirm the attachment of p-TDFA-PEG-p-TDFA onto the silicon substrate, together with the chemical compositions of p-TDFA-PEG-p-TDFA. The wetabilities of the oligomer films were measured by water contact angles (CAs). Water CAs of p-TDFA-PEG-p-TDFA film were measured and their morphologies were tested by atomic force microscopy (AFM). The result showed that the CAs of the oligomer films, which possess fluoroalkyl groups assembled on the outer surface, increase after heating due to the migration of fluoroalkyl groups and the resulted microphase separation of the p-TDFA-PEG-p-TDFA.

Confinement Effects with Molten Thin Cyclic Polystyrene Films

The surface fluctuations of a melt film of a low molecular weight cyclic polystyrene (CPS) manifest confinement effects for a film thickness (14R_g) much larger than that for which a melt film of the linear chain analog manifests confinement. This is true both in terms of absolute thickness and thickness relative to chain size, R_g. In fact, the linear analog polymer does not manifest confinement effects even at a thickness of 7R_g. Both types of films have a strongly adsorbed layer at the substrate that plays a role in slowing the surface fluctuations for the thinnest films. This layer is 70% thicker for the cyclic chains than for the linear chains. At the interface with the substrate the packing of the cyclic chains is perturbed much more strongly than is the packing of the linear chains.

Prediction and clarification of structures of (bio)molecules on surfaces

The design of future materials for biotechnological applications via deposition of molecules on surfaces will require not only exquisite control of the deposition procedure, but of equal importance will be our ability to predict the shapes and stability of individual molecules on various surfaces. Furthermore, one will need to be able to predict the structure patterns generated during the self-organization of whole layers of (bio)molecules on the surface. In this review, we present an overview over the current state of the art regarding the prediction and clarification of structures of biomolecules on surfaces using theoretical and computational methods.

Pressure sensitive microparticle adhesion through biomimicry of the pollen-stigma interaction

Many soft biomimetic synthetic adhesives, optimized to support macroscopic masses (∼kg), have been inspired by geckos, insects and other animals. Far less work has investigated bioinspired adhesion that is tuned to micro- and nano-scale sizes and forces. However, such adhesive forces are extremely important in the adhesion of micro- and nanoparticles to surfaces, relevant to a wide range of industrial and biological systems. Pollens, whose adhesion is critical to plant reproduction, are an evolutionary-optimized system for biomimicry to engineer tunable adhesion between particles and micro-patterned soft matter surfaces. In addition, the adhesion of pollen particles is relevant to topics as varied as pollinator ecology, transport of allergens, and atmospheric phenomena. We report the first observation of structurally-derived pressure-sensitive adhesion of a microparticle by using the sunflower pollen and stigma surfaces as a model. This strong, pressure-sensitive adhesion results from interlocking between the pollen's conical spines and the stigma's receptive papillae. Inspired by this behavior, we fabricated synthetic polymeric patterned surfaces that mimic the stigma surface's receptivity to pollen. These soft mimics allow the magnitude of the pressure-sensitive response to be tuned by adjusting the size and spacing of surface features. These results provide an important new insight for soft material adhesion based on bio-inspired principles, namely that ornamented microparticles and micro-patterned surfaces can be designed with complementarity that enable a tunable, pressure-sensitive adhesion on the microparticle size and length scale.

Multipurpose Polymeric Coating for Functionalizing Inert Polymer Surfaces

In this work, we report on the development of a highly functionalizable polymer coating prepared by the chemical coupling of trichlorosilane (TCS) to the vinyl groups of poly(vinylmethyl siloxane) (PVMS). The resultant PVMS-TCS copolymer can be coated as a functional organic primer layer on a variety of polymeric substrates, ranging from hydrophilic to hydrophobic. Several case studies demonstrating the remarkable and versatile properties of PVMS-TCS coatings are presented. In particular, PVMS-TCS is found to serve as a convenient precursor for the deposition of organosilanes and the subsequent growth of polymer brushes, even on hydrophobic surfaces, such as poly(ethylene terephthalate) and polypropylene. In this study, the physical and chemical characteristics of these versatile PVMS-TCS coatings are interrogated by an arsenal of experimental probes, including scanning electron microscopy, water contact-angle measurements, ellipsometry, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure spectroscopy.

Stimuli-responsive supramolecular materials: photo-tunable properties and molecular recognition behavior

A supramolecular system stabilized through complementary hydrogen bonding and displaying stimuli-responsive behavior has been fabricated into “recordable” and “rewritable” surface relief gratings operated under laser illumination.

Further Reflections on the Geometric Mean Combining Rule for Interfacial Tension

Wettability is a widely used method to estimate the surface (free) energies of solids. The measured contact angles are usually processed within the framework of Fowkes and Good that uses a geometric mean combining rule of interfacial interactions. Recently, this method of calculating the interfacial tension has been questioned as it appears to yield somewhat unphysical results of interfacial energetics in certain situations. We would like to demonstrate that these unphysical results are consequences of the neglect of the preferential enrichment or depletion of the most surface-active functionalities of a molecule composed of various chemical groups at the liquid-air, liquid-liquid, and liquid-solid interfaces that the quintessential Fowkes-Good analysis does not account for. When the base state of the surface energy is estimated using Lifshitz theory and the preferential segregation of the functional groups at the interface is taken into account, the difficulty associated with the Fowkes-Good approach seems to disappear. This, however, raises new challenges and opportunities related to the estimation of surface energetics based on wettability.

Fabrication of polymer brush surfaces with highly-ordered perfluoroalkyl side groups at the brush end and their antibiofouling properties

The protein-resistant performance was enhanced greatly by constructing a polymer brush surface with perfectly close-packed perfluoroalkyl groups.

A stereoregular macrocyclic oligomeric silsesquioxane bearing epoxide groups: synthesis and its nanocomposites with polybenzoxazine

cis-Hexa(phenyl glycidyl) MOSS, a novel macrocyclic oligomeric silsesquioxane (MOSS) was synthesized and incorporated into polybenzoxazine to obtain the organic–inorganic nanocomposites.

Non-toxic, non-biocide-release antifouling coatings based on molecular structure design for marine applications

Antifouling (AF) coatings bring economic benefits but raise environmental and health concerns. Non-toxic, non-biocide-release AF strategies are reviewed according to “detachment of biofoulants” and “prevention of attachment” approaches. Chemical and physical aspects of AF mechanisms and new amphiphilic, superhydrophilic and topographic AF strategies are discussed.

Toward the development of a versatile functionalized silicone coating

The development of a versatile silicone copolymer coating prepared by the chemical coupling of trichlorosilane (TCS) to the vinyl groups of poly(vinylmethylsiloxane) (PVMS) is reported. The resultant PVMS-TCS copolymer can be deposited as a functional organic layer on a hydrophobic poly(dimethylsiloxane) substrate and its mechanical modulus can be regulated by varying the TCS coupling ratio. In this paper, several case studies demonstrating the versatile properties of these PVMS-TCS functional coatings on PDMS elastomer substrates are presented. Numerous experimental probes, including optical microscopy, Fourier-transform infrared spectroscopy, surface contact angle, ellipsometry, and nanoindentation, are utilized to interrogate the physical and chemical characteristics of these PVMS-TCS coatings.

Optimizing the Selectivity of Surface-Adsorbing Multivalent Polymers

Multivalent polymers are macromolecules containing multiple chemical moieties designed to bind to complementary moieties on a target; for example, a protein with multiple ligands that have affinity for receptors on a cell surface. Though the individual ligand-receptor bonds are often weak, the combinatorial entropy associated with the different possible ligand-receptor pairs leads to a binding transition that can be very sharp with respect to control parameters, such as temperature or surface receptor concentration. We use mean-field self-consistent field theory to study the binding selectivity of multivalent polymers to receptor-coated surfaces. Polymers that have their ligands clustered into a contiguous domain, either located at the chain end or chain midsection, exhibit cooperative surface adsorption and superselectivity when the polymer concentration is low. On the other hand, when the ligands are uniformly spaced along the chain backbone, selectivity is substantially reduced due to the lack of binding cooperativity and due to crowding of the surface by the inert polymer segments in the chain backbone.