Temperature-based fluorescence measurements of pyrene in block copolymer micelles: Probing micelle core glass transition breadths

Getting into Shape: Reflections on a New Generation of Cylindrical Nanostructures' Self-Assembly Using Polymer Building Blocks

Cylinders are fascinating structures with uniquely high surface area, internal volume, and rigidity. On the nanoscale, a broad range of applications have demonstrated advantageous behavior of cylindrical micelles or bottlebrush polymers over traditional spherical nano-objects. In the past, obtaining pure samples of cylindrical nanostructures using polymer building blocks via conventional self-assembly strategies was challenging. However, in recent years, the development of advanced methods including polymerization-induced self-assembly, crystallization-driven self-assembly, and bottlebrush polymer synthesis has facilitated the easy synthesis of cylindrical nano-objects at industrially relevant scales. In this Perspective, we discuss these techniques in detail, highlighting the advantages and disadvantages of each strategy and considering how the cylindrical nanostructures that are obtained differ in their chemical structure, physical properties, colloidal stability, and reactivity. In addition, we propose future challenges to address in this rapidly expanding field.

Glassy worm-like micelles in solvent and shear mediated shape transitions

The glassiness of polymer melts is generally considered to be suppressed by small dimensions, added solvent, and heat. Here, we suggest that glassiness persists at the nanoscale in worm-like micelles composed of amphiphilic diblock copolymers of poly(ethylene oxide)-polystyrene (PS). The glassiness of these worms is indicated by a lack of fluorescence recovery after photobleaching as well as micron-length rigid segments separated by hinges. The coarse-grained molecular dynamics studies probe the dynamics of the PS in these glassy worms. Addition of an organic solvent promotes a transition from hinged to fully flexible worms and to spheres or vesicles. Simulation demonstrates two populations of organic solvent in the core of the micelle-a solvent 'pool' in the micelle core and a second population that accumulates at the interface between the core and the corona. The stable heterogeneity of the residual solvent could explain the unusual hinged rigidity, but solvent removal during shear-extension could be more effective and yield - as observed - nearly straight worms without hinges.

Direct Measurement of the Local Glass Transition in Self-Assembled Copolymers with Nanometer Resolution

Nanoscale compositional heterogeneity in block copolymers can impart synergistic property combinations, such as stiffness and toughness. However, until now, there has been no experimental method to locally probe the dynamics at a specific location within these structured materials. Here, this was achieved by incorporating pyrene-bearing monomers at specific locations along the polymer chain, allowing the labeled monomers' local environment to be interrogated via fluorescence. In lamellar-forming poly(butyl methacrylate-b-methyl methacrylate) diblock copolymers, a strong gradient in glass transition temperature, T_g, of the higher-T_g block, 42 K over 4 nm, was mapped with nanometer resolution. These measurements also revealed a strongly asymmetric influence of the domain interface on T_g, with a much smaller dynamic gradient being observed for the lower-T_g block.

Splitting of Surface-Immobilized Multicompartment Micelles into Clusters upon Charge Inversion

We investigate a morphological transition of surface-immobilized triblock terpolymer micelles: the splitting into well-defined clusters of satellite micelles upon pH changes. The multicompartment micelles are formed in aqueous solution of ABC triblock terpolymers consisting of a hydrophobic polybutadiene block, a weak polyanionic poly(methacrylic acid) block, and a weak polycationic poly(2-(dimethylamino)ethyl methacrylate) block. They are subsequently immobilized on silicon wafer surfaces by dip-coating. The splitting process is triggered by a pH change to strongly basic pH, which goes along with a charge reversal of the micelles. We find that the aggregation number of the submicelles is well-defined and that larger micelles have a tendency to split into a larger number of submicelles. Furthermore, there is a clear preference for clusters consisting of doublets and triplets of submicelles. The morphology of surface-immobilized clusters can be "quenched" by returning to the original pH. Thus, such well-defined micellar clusters can be stabilized and are available as colloidal building blocks for the formation of hierarchical surface structures. We discuss the underlying physicochemical principles of the splitting process considering changes in charge and total free energy of the micelles upon pH change.

Size Control and Fractionation of Ionic Liquid Filled Polymersomes with Glassy and Rubbery Bilayer Membranes

We demonstrate control over the size of ionic liquid (IL) filled polymeric vesicles (polymersomes) by three distinct methods: mechanical extrusion, cosolvent-based processing in an IL, and fractionation of polymersomes in a biphasic system of IL and water. For the representative ionic liquid (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([EMIM][TFSI])), the size and dispersity of polymersomes formed from 1,2-polybutadiene-b-poly(ethylene oxide) (PB-PEO) and polystyrene-b-poly(ethylene oxide) (PS-PEO) diblock copolymers were shown to be sensitive to assembly conditions. During mechanical extrusion through a polycarbonate membrane, the relatively larger polymersomes were broken up and reorganized into vesicles with mean size comparable to the membrane pore (100 nm radius); the distribution width also decreased significantly after only a few passes. Other routes were studied using the solvent-switch or cosolvent (CS) method, whereby the initial content of the cosolvent and the PEO block length of PS-PEO were systemically changed. The nonvolatility of the ionic liquid directly led to the desired concentration of polymersomes in the ionic liquid using a single step, without the dialysis conventionally used in aqueous systems, and the mean vesicle size depended on the amount of cosolvent employed. Finally, selective phase transfer of PS-PEO polymersomes based on size was used to extract larger polymersomes from the IL to the aqueous phase via interfacial tension controlled phase transfer. The interfacial tension between the PS membrane and the aqueous phase was varied with the concentration of sodium chloride (NaCl) in the aqueous phase; then the larger polymersomes were selectively separated to the aqueous phase due to differences in shielding of the hydrophobic core (PS) coverage by the hydrophilic corona brush (PEO). This novel fractionation is a simple separation process without any special apparatus and can help to prepare monodisperse polymersomes and also separate unwanted morphologies (in this case, worm-like micelles).

Surface Mechanical and Rheological Behaviors of Biocompatible Poly((D,L-lactic acid-ran-glycolic acid)-block-ethylene glycol) (PLGA-PEG) and Poly((D,L-lactic acid-ran-glycolic acid-ran-ε-caprolactone)-block-ethylene glycol) (PLGACL-PEG) Block Copolymers at the Air-Water Interface

Air-water interfacial monolayers of poly((D,L-lactic acid-ran-glycolic acid)-block-ethylene glycol) (PLGA-PEG) exhibit an exponential increase in surface pressure under high monolayer compression. In order to understand the molecular origin of this behavior, a combined experimental and theoretical investigation (including surface pressure-area isotherm, X-ray reflectivity (XR) and interfacial rheological measurements, and a self-consistent field (SCF) theoretical analysis) was performed on air-water monolayers formed by a PLGA-PEG diblock copolymer and also by a nonglassy analogue of this diblock copolymer, poly((D,L-lactic acid-ran-glycolic acid-ran-caprolactone)-block-ethylene glycol) (PLGACL-PEG). The combined results of this study show that the two mechanisms, i.e., the glass transition of the collapsed PLGA film and the lateral repulsion of the PEG brush chains that occur simultaneously under lateral compression of the monolayer, are both responsible for the observed PLGA-PEG isotherm behavior. Upon cessation of compression, the high surface pressure of the PLGA-PEG monolayer typically relaxes over time with a stretched exponential decay, suggesting that in this diblock copolymer situation, the hydrophobic domain formed by the PLGA blocks undergoes glass transition in the high lateral compression state, analogously to the PLGA homopolymer monolayer. In the high PEG grafting density regime, the contribution of the PEG brush chains to the high monolayer surface pressure is significantly lower than what is predicted by the SCF model because of the many-body attraction among PEG segments (referred to in the literature as the "n-cluster" effects). The end-grafted PEG chains were found to be protein resistant even under the influence of the "n-cluster" effects.

Interfacial tension-hindered phase transfer of polystyrene-b-poly(ethylene oxide) polymersomes from a hydrophobic ionic liquid to water

We examine the phase transfer of polystyrene-b-poly(ethylene oxide) (PS-PEO) polymersomes from a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]), into water. The dependence of the phase transfer on the molecular weight and PEO volume fraction (fPEO) of the PS-PEO polymersomes was systematically studied by varying the molecular weight of PS (10,000-27,000 g/mol) as well as by varying the volume fraction of PEO (fPEO) between 0.1 and 0.3. We demonstrate a general boundary for the phase transfer in terms of a reduced tethering density for PEO (σPEO), which is independent of the molecular weight of the hydrophobic PS. The reduced PEO tethering density was controlled by changing the polymersome size (i.e., increased polymersome sizes increase σPEO), confirming that it is the driving force in the transfer of PS-PEO polymersomes at room temperature. The phase transfer dependence on σPEO was also analyzed in terms of the free energy of polymersomes in the biphasic system. The quality of the aqueous phase, which affects the interfacial tension of the PS membrane, influenced the phase transfer. We systematically reduced the interfacial tension by adding a water-selective solvent, THF, which has a similar effect to increasing σPEO. The results indicate that the interfacial tension between the membrane and water plays an important role in the phase transfer with the corona and that the phase transfer can be controlled either by the dimensions of the polymersomes or by the suitability of the solvent for the membrane. The interfacial tension-hindered phase transfer of polymersomes in the biphasic water-[EMIM][TFSI] system will inform the design of temperature-sensitive and reversible nanoreactors and the separation of polydisperse particles according to size by tuning the quality of the solvent.

Sensitive and reliable detection of glass transition of polymers by fluorescent probes based on AIE luminogens

A sensitive and reliable approach for the detection of the glass transition of polymers using AIE luminogens as fluorescent probes was reported.

Segmental relaxation behavior of polystyrene chains in the cores of collapsed dry micelles tethered on the micelle film surface by a poly(acrylic acid) corona

We present an experimental investigation of the segmental relaxation behavior of polystyrene (PS) chains that are confined in a micellar core tethered by a poly(acrylic acid) (PAA) block corona on the dry film surface, along with various core density and molecular weight of PS block from below to well above the entanglement molecular weight. The results show that the onset temperature of PS chain rearrangement (T(onset)), which was much lower than the T(bulk)(g) of the corresponding PS block and higher than T(film)(g) of ultrathin PS films with corresponding thickness and molecular weights, generally increases with increasing density of the micelle core. It was found that the difference in ΔT(onset) with increasing relative density ρ/ρmin obtained from PS154-b-PAA49 and PS278-b-PAA47 micelles was large, while these from PS278-b-PAA47 and PS404-b-PAA63 was negligible, suggesting that entanglement has considerable influence on the density dependence of the T(onset) of PS chains under confinement in the micelle core on the film surface.

A triarylboron-based fluorescent temperature indicator: sensitive both in solid polymers and in liquid solvents

A novel triarylboron compound, MPB, exhibiting reversible thermochromic fluorescence in solid-state polymers and in liquid solvents was designed and synthesized.

Solvent nanostructure, the solvophobic effect and amphiphile self-assembly in ionic liquids

The ability of ionic liquids (ILs) to support amphiphile self-assembly into a range of mesophase structures has been established as a widespread phenomenon. From the ILs evaluated as self-assembly media, the vast majority have supported some lyotropic liquid crystal phase formation. Many neat ionic liquids have been shown to segregate into polar and non-polar domains to form a nanostructured liquid. A very strong correlation between the nanostructure of the ionic liquid and its characteristics as an amphiphile self-assembly solvent has been found. In this review we discuss ionic liquids as amphiphile self-assembly media, and identify trends that can be used to distinguish which ionic liquids are likely to have good promotion properties as self-assembly media. In particular these trends focus on the nanostructure of neat ionic liquids, their solvent cohesive energy density, and the related solvophobic effect. We forecast that many more ILs will be identified as amphiphile self-assembly solvents in the future.

Microstructural reorganization and cargo release in pyrene urethane methacrylate random copolymer hollow capsules

We report the synthesis of polymer microcapsules by direct one-pot free radical random copolymerization approach. Urethane methacrylate comb monomers having pendant pyrene (Py) and 3-pentadecyl phenol (PDP) units were copolymerized in a random manner using benzoyl peroxide (BPO) as free radical initiator in dimethylformamide (DMF) as solvent. These copolymers and corresponding homopolymers spontaneously self-organized into microspheres upon drop casting from solvents like DMF and tetrahydrofuran (THF). Stable microspheres were obtained in water by dialyzing THF solution of the polymers against water in dialysis bags with molecular weight cutoff of ∼2000. The hollow nature of the spheres was confirmed by rhodamine B (RhB) encapsulation followed by Förster resonance energy transfer (FRET) based fluorescence emission from RhB upon exciting pyrene. The microenvironment inside the capsule was probed by following the I(1)/I(3) ratio of pyrene emission as well as RhB release as a function of temperature. The RhB encapsulated in the pyrene homopolymer PIHP-100Py capsules experienced strong donor-acceptor interaction and did not undergo complete release even at high temperature (85 °C). The encapsulated RhB from the copolymers with low pyrene incorporation was released almost fully upon heating beyond 50 °C. Pyrene moieties in the PIHP-100Py were shielded from surrounding water and experienced a hydrophobic environment, whereas in the low pyrene incorporated copolymer the PDP units were better shielded from the hydrophilic environment. This work represents a simple approach to produce polymer hollow capsules, and the varying pyrene incorporation was used to trace the microenvironment inside the capsules.