Inhibition of biofilm, quorum-sensing, and swarming motility in pathogenic bacteria by magnetite, manganese ferrite, and nickel ferrite nanoparticles

Resistance to antibiotics by pathogenic bacteria constitutes a health burden and nanoparticles (NPs) are being developed as alternative and multipurpose antimicrobial substances. Magnetite (Fe3O4 np), manganese ferrite (MnFe2O4 np) and nickel ferrite (NiFe3O4 np) NPs were synthesized and characterized using thermogravimetric analysis, transmission electron microscopy, Fourier transformed infra-red, and X-ray diffraction. The minimal inhibitory concentrations (MIC) ranged from 0.625 to 10 mg/mL against gram-positive (Staphylococcus aureus ATCC 25923 and Enterococcus faecalis ATCC 29212), gram-negative (Escherichia coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853) and candida (Candida albicans ATCC 10239 and Candida tropicalis ATCC 13803) species. The NPs exhibited violacein inhibition against Chromobacterium violaceum CV12472 of 100% at MIC and reduced to 27.2% ± 0.8% for magnetite NPs, 12.7% ± 0.3% for manganese ferrite NPs and 43.1% ± 0.2% for nickel ferrite NPs at MIC/4. Quorum-sensing (QS) inhibition zones against C. violaceum CV026 were 12.5 ±0.6 mm for Fe3O4 np, 09.1 ± 0.5 mm for MnFe3O4 NP and 17.0 ± 1.2 mm for NiFe3O4 np. The NPs inhibited swarming motility against P. aeruginosa PA01 and biofilm against six pathogens and the gram-positive biofilms were more susceptible than the gram-negative ones. The NiFe2O4 np had highest antibiofilm activity against gram-positive and gram-negative bacteria as well as highest QS inhibition while Fe3O4 NP had highest biofilm inhibition against candida species. The synthesized magnetic NPs can be used in developing anti-virulence drugs which reduce pathogenicity of bacteria as well as resistance.

Design, preparation, and combustion performance of energetic catalysts based on transition metal ions (Cu2+, Co2+, Fe2+) and 3-aminofurazan-4-carboxylic acid

Development of energetic catalysts with high energy density and strong catalytic activity has become the focus and frontier of research, which is expected to improve the combustion performance and ballistic properties of solid propellants. In this work, three energetic catalysts, M(H2O)4(AFCA)2·H2O (AFCA = 3-aminofurazan-4-carboxylic acid, M = Cu, Co, Fe), are designed and synthesized based on the coordination reaction of transition metal ions and the energetic ligand. The target products are characterized by single crystal X-ray diffraction, Fourier transform infrared spectroscopy, differential thermal analysis, optical microscopy, and scanning electron microscopy. The results reveal that Cu(H2O)4(AFCA)2·H2O crystallizes in the monoclinic space group, Dc = 1.918 g cm-3. Co(H2O)4(AFCA)2·H2O, and Fe(H2O)4(AFCA)2·H2O belong to orthorhombic space groups, their density is 1.886 g cm-3 and 1.856 g cm-3, respectively. In addition, the designed catalysts show higher catalytic activity than some reported catalysts such as Co(en)(H2BTI)2]2·en (H3BTI = 4,5-bis(1H-tetrazol-5-yl)-1H-imida-zole), Co-AzT (H2AzT = 5,5'-azotetrazole-1,1'-diol), and [Pb(BTF)(H2O)2]n (BTF = 4,4'-oxybis [3,3'-(1-hydroxy-tetrazolyl)]furazan) for the thermal decomposition of ammonium perchlorate (AP). The high-temperature decomposition peak temperatures of AP/Cu(H2O)4(AFCA)2·H2O, AP/Co(H2O)4(AFCA)2·H2O, and AP/Fe(H2O)4 (AFCA)2·H2O are decreased by 120.3 °C, 151.8 °C and 89.5 °C compared to the case of pure AP, while the heat release of them are increased by 768.8 J g-1, 780.5 J g-1, 750.9 J g-1, respectively. Moreover, the burning rates of solid propellants composed of AP/Cu(AFCA)2(H2O)4·H2O, AP/Co(AFCA)2(H2O)4·H2O and AP/Fe(AFCA)2(H2O)4·H2O are increased by 2.16 mm s-1, 2.53 mm s-1, and 1.57 mm s-1 compared with the case of pure AP. This research shows considerable application prospects in improving the combustion and energy performance of solid propellants, it is also a reference for the design and preparation of other novel energetic catalysts.

Hematite: A Good Catalyst for the Thermal Decomposition of Energetic Materials and the Application in Nano-Thermite

Metal oxides (MOs) are of great importance in catalysts, sensor, capacitor and water treatment. Nano-sized MOs have attracted much more attention because of the unique properties, such as surface effect, small size effect and quantum size effect, etc. Hematite, an especially important additive as combustion catalysts, can greatly speed up the thermal decomposition process of energetic materials (EMs) and enhance the combustion performance of propellants. This review concludes the catalytic effect of hematite with different morphology on some EMs such as ammonium perchlorate (AP), cyclotrimethylenetrinitramine (RDX), cyclotetramethylenete-tranitramine (HMX), etc. The method for enhancing the catalytic effect on EMs using hematite-based materials such as perovskite and spinel ferrite materials, making composites with different carbon materials and assembling super-thermite is concluded and their catalytic effects on EMs is also discussed. Therefore, the provided information is helpful for the design, preparation and application of catalysts for EMs.

In Situ Cutting of Ammonium Perchlorate Particles by Co-Bipy "scalpel" for High Efficiency Thermal Decomposition

Burning rate of solid propellants can be effectively improved by adding catalysts and using smaller size ammonium perchlorate (AP). Although few reports, the exploration of changing the size of AP primary particles by catalysts is of great significance for improving combustion performance. Here, taking Co-bipy as an example, the potential advantages of such materials as AP decomposition catalysts are reported. Due to the existence of NO3 - combined with oxygen rich environment provided by AP, the structural self-transformation from micronrods to nanoparticles can be quickly realized during the heating process. More importantly, when Co-bipy decomposes, it can play the role of "scalpel" and in situ cut AP particles. Results show that high-temperature decomposition of Co-bipy/AP occurs at 305.8 °C, which is 137.5 °C lower than that of pure AP. Catalytic mechanism is discussed by in situ IR and TG-IR, CoO can effectively increase the content of reactive oxygen species and weaken the N-H bond, realizing the rapid oxidation of NH3 . Eventually, the behavior of Co-bipy cutting AP particles is tested. This interesting catalyst structure self-transformation behavior can not only realize the influence on AP, but also perform a positive function in the combustion process of solid propellants, such as opening the adhesive AP interface.

Improvement in Migration Resistance of Hydroxyl-Terminated Polybutadiene (HTPB) Liners by Using Graphene Barriers

The excessive migration of plasticizers leads to debonding and cracking of a liner, which can compromise the safety of a solid propellant. Graphene oxide (GO), with a laminar structure as a filler, can effectively reduce the migration of plasticizers. In this study, we modified GO using toluene diisocyanate (TDI). The cross-link density of the substrate was increased by grafting isocyanate groups to obtain a denser liner for the purpose of preventing plasticizer migration. We also used octadecylamine (ODA) to modify GO by grafting negatively charged amide groups on the GO surface. The electrostatic repulsive effect of the amide group on the plasticizer molecules was used to prevent plasticizer migration. Two modified GOs were filled into the hydroxyl-terminated polybutadiene to prepare two composite liners. We then investigated the migration resistance and migration kinetics of each modified liner using the dipping method. In addition, we explored the mechanical properties of each modified liner. Compared with the original liner, the anti-migration and mechanical properties of the modified composite liners were significantly improved. Among them, the TDI-modified liner had the most obvious improvement in migration resistance, while the ODA-modified liner had the greatest improvement in bonding properties. All types of liners met the requirements of the current propellant systems. This study provides an effective reference for improving the migration resistance and bonding properties of the composite liner.

Polymeric Carbon Nitride/Iron Oxide Composites: A Novel Class of Catalysts with Reduced Metal Content for Ammonium Perchlorate Thermal Decomposition

The ever-growing number of space launches triggering an enormous release of metallic dead weight into the atmosphere has become a global concern. Despite technological advancements, the inclusion of environmental concerns in space research has become the need of the hour. Here, we report the impact of iron oxide (Fe₂O₃)-doped polymeric carbon nitride (gCN) composites with varying metal contents (namely, GF1, GF2, and GF3 with iron contents of 0.1, 0.25, and 2 mmol, respectively) as a new class of catalysts for ammonium perchlorate (AP) thermolysis. Morphology studies revealed the dendritic morphology of the synthesized Fe₂O₃, and X-ray photoelectron spectroscopy (XPS) analysis confirmed the effective interaction between Fe₂O₃ and gCN in the composites. Among all of the synthesized composites, GF2 shows superior catalytic competence toward AP decomposition by amalgamating the double-stage decomposition process into a single stage followed by a considerable decrease in the decomposition temperature. The kinetic parameters calculated for the thermal decomposition of AP with and without catalysts using the KAS method substantiated the above results by significantly reducing the activation energy from 173.2 to 151.7 kJ/mol. Later, thermogravimetric and mass-spectrometric (TG-MS) analysis gives a clear idea about the catalytic efficiency of the synthesized catalyst GF2 toward AP decomposition from the accelerated emission of decomposition products NO, NO₂, Cl, HCl, Cl₂, and N₂O in the presence of GF2. In a nutshell, gCN/Fe₂O₃ will open up new horizons in the field of synthesis of new catalytic systems with minimal metal content for composite solid propellants.

Biocompatibility and colorectal anti-cancer activity study of nanosized BaTiO3 coated spinel ferrites

In the present work, different nanoparticles spinel ferrite series (MFe2O4, Co0.5M0.5Fe2O4; M = Co, Mn, Ni, Mg, Cu, or Zn) have been obtained via sonochemical approach. Then, sol-gel method was employed to design core-shell magnetoelectric nanocomposites by coating these nanoparticles with BaTiO3 (BTO). The structure and morphology of the prepared samples were examined by X-ray powder diffraction (XRD), scanning electron microscope (SEM) coupled with energy dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscope (HR-TEM), and zeta potential. XRD analysis showed the presence of spinel ferrite and BTO phases without any trace of a secondary phase. Both phases crystallized in the cubic structure. SEM micrographs illustrated an agglomeration of spherical grains with nonuniformly diphase orientation and different degrees of agglomeration. Moreover, HR-TEM revealed interplanar d-spacing planes that are in good agreement with those of the spinel ferrite phase and BTO phase. These techniques along with EDX analyses confirmed the successful formation of the desired nanocomposites. Zeta potential was also investigated. The biological influence of (MFe2O4, CoMFe) MNPs and core-shell (MFe2O4@BTO, CoMFe@BTO) magnetoelectric nanocomposites were examined by MTT and DAPI assays. Post 48 h of treatments, the anticancer activity of MNPs and MENCs was investigated on human colorectal carcinoma cells (HCT-116) against the cytocompatibility of normal non-cancerous cells (HEK-293). It was established that MNPs possess anti-colon cancer capability while MENCs exhibited a recovery effect due to the presence of a protective biocompatible BTO layer. RBCs hemolytic effect of NPs has ranged from non- to low-hemolytic effect. This effect that could be attributed to the surface charge from zeta potential, also the CoMnFe possesses the stable and lowest zeta potential in comparison with CoFe2O4 and MnFe2O4 also to the protective effect of shell. These findings open up wide prospects for biomedical applications of MNPs as anticancer and MENCs as promising drug nanocarriers.

Novel Z-scheme binary zinc tungsten oxide/nickel ferrite nanohybrids for photocatalytic reduction of chromium (Cr (VI)), photoelectrochemical water splitting and degradation of toxic organic pollutants

A simple hydrothermal approach was demonstrated for synthesizing a coupled NiFe₂O₄-ZnWO₄ nanocomposite, wherein one-dimensional ZnWO₄ nanorods were inserted into two-dimensional NiFe₂O₄ nanoplates. Herein, we evaluated the photocatalytic removal of Cr(VI), and degradation of tetracycline (TC) and methylene blue (MB) by the nanocomposite, as well as its ability to split water. The ZnWO₄ nanorods enriched the synergistic interactions, upgraded the solar light fascination proficiency, and demonstrated outstanding detachment and migration of the photogenerated charges, as confirmed by a transient photocurrent study and electrochemical impedance spectroscopy measurements. Compared to pristine NiFe₂O₄ and ZnWO_4, the NiFe₂O₄-ZnWO₄ nanocomposite exhibited a higher Cr(VI) reduction (93.5%) and removal of TC (97.9%) and MB (99.6%). Radical trapping results suggested that hydroxyl and superoxide species are dominant reactive species, thereby facilitating the Z-scheme mechanism. Furthermore, a probable photocatalytic mechanism was projected based on the experimental results. The photoelectrochemical analysis confirmed that NiFe₂O₄-ZnWO₄ exhibited minor charge-transfer resistance and large photocurrents. We propose a novel and efficient approach for designing a coupled heterostructured nanocomposites with a significant solar light ability for ecological conservation and water splitting.

Tuning the microstructural and magnetic properties of CoFe2O4/SiO2 nanocomposites by Cu2+ doping

Co–Cu ferrite is a promising functional material in many practical applications, and its physical properties can be tailored by changing its composition. In this work, Co_1−xCu_xFe₂O₄ (0 ≤ x ≤ 0.3) nanoparticles (NPs) embedded in a SiO₂ matrix were prepared by a sol–gel method. The effect of a small Cu²⁺ doping content on their microstructure and magnetic properties was studied using XRD, TEM, Mössbauer spectroscopy, and VSM. It was found that single cubic Co_1−xCu_xFe₂O₄ ferrite was formed in amorphous SiO₂ matrix. The average crystallite size of Co_1−xCu_xFe₂O₄ increased from 18 to 36 nm as Cu²⁺ doping content x increased from 0 to 0.3. Mössbauer spectroscopy indicated that the occupancy of Cu²⁺ ions at the octahedral B sites led to a slight deformation of octahedral symmetry, and Cu²⁺doping resulted in cation migration between octahedral A and tetrahedral B sites. With Cu²⁺ content increasing, the saturation magnetization (M_s) first increased, then tended to decrease, while the coercivity (H_c) decreased continuously, which was associated with the cation migration. The results suggest that the Cu²⁺ doping content in Co_1−xCu_xFe₂O₄ NPs plays an important role in its magnetic properties.

The Cu²⁺ doping content in Co_1−xCu_xFe₂O₄/SiO₂ plays an important role in tuning hyperfine interaction and magnetic properties.