Specificity mapping of cellulolytic enzymes: classification into families of structurally related proteins confirmed by biochemical analysis

A novel acid-tolerant β-xylanase from Scytalidium candidum 3C for the synthesis of o-nitrophenyl xylooligosaccharides

Endo-β-xylanases are hemicellulases involved in the conversion of xylans in plant biomass. Here, we report a novel acidophilic β-xylanase (ScXynA) with high transglycosylation abilities that was isolated from the filamentous fungus Scytalidium candidum 3C. ScXynA was identified as a glycoside hydrolase family 10 (GH10) dimeric protein, with a molecular weight of 38 ± 5 kDa per subunit. The enzyme catalyzed the hydrolysis of different xylans under acidic conditions and was stable in the pH range 2.6-4.5. The kinetic parameters of ScXynA were determined in hydrolysis reactions with p-nitrophenyl-β-d-cellobioside (pNP-β-Cel) and p-nitrophenyl-β-d-xylobioside (pNP-β-Xyl₂ ), and k_cat /K_m was found to be 0.43 ± 0.02 (s·mM)^-1 and 57 ± 3 (s·mM)^-1 , respectively. In the catalysis of the transglycosylation o-nitrophenyl-β-d-xylobioside (oNP-β-Xyl₂ ) acted both as a donor and an acceptor, resulting in the efficient production of o-nitrophenyl xylooligosaccharides, with a degree of polymerization of 3-10 and o-nitrophenyl-β-d-xylotetraose (oNP-β-Xyl₄ ) as the major product (18.5% yield). The modeled ScXynA structure showed a favorable position for ligand entry and o-nitrophenyl group accommodation in the relatively open -3 subsite, while the cleavage site was covered with an extended loop. These structural features provide favorable conditions for transglycosylation with oNP-β-Xyl₂ . The acidophilic properties and high transglycosylation activity make ScXynA a suitable choice for various biotechnological applications, including the synthesis of valuable xylooligosaccharides.

β-Xylosidases: Structural Diversity, Catalytic Mechanism, and Inhibition by Monosaccharides

Xylan, a prominent component of cellulosic biomass, has a high potential for degradation into reducing sugars, and subsequent conversion into bioethanol. This process requires a range of xylanolytic enzymes. Among them, β-xylosidases are crucial, because they hydrolyze more glycosidic bonds than any of the other xylanolytic enzymes. They also enhance the efficiency of the process by degrading xylooligosaccharides, which are potent inhibitors of other hemicellulose-/xylan-converting enzymes. On the other hand, the β-xylosidase itself is also inhibited by monosaccharides that may be generated in high concentrations during the saccharification process. Structurally, β-xylosidases are diverse enzymes with different substrate specificities and enzyme mechanisms. Here, we review the structural diversity and catalytic mechanisms of β-xylosidases, and discuss their inhibition by monosaccharides.

A novel automatable enzyme-coupled colorimetric assay for endo-1,4-β-glucanase (cellulase)

endo-1,4-β-Glucanase (endo-cellulase, EC 3.2.1.4) is one of the most widely used enzymes in industry. Despite its importance, improved methods for the rapid, selective, quantitative assay of this enzyme have been slow to emerge. In 2014, a novel enzyme-coupled assay that addressed many of the limitations of the existing assay methodology was reported. This involved the use of a bifunctional substrate chemically derived from cellotriose. Reported herein is a much improved version of this assay employing a novel substrate, namely 4,6-O-(3-ketobutylidene)-4-nitrophenyl-β-d-cellopentaoside.

Graphical Abstract

Ligand-binding specificity and promiscuity of the main lignocellulolytic enzyme families as revealed by active-site architecture analysis

Biomass can be converted into sugars by a series of lignocellulolytic enzymes, which belong to the glycoside hydrolase (GH) families summarized in CAZy databases. Here, using a structural bioinformatics method, we analyzed the active site architecture of the main lignocellulolytic enzyme families. The aromatic amino acids Trp/Tyr and polar amino acids Glu/Asp/Asn/Gln/Arg occurred at higher frequencies in the active site architecture than in the whole enzyme structure. And the number of potential subsites was significantly different among different families. In the cellulase and xylanase families, the conserved amino acids in the active site architecture were mostly found at the −2 to +1 subsites, while in β-glucosidase they were mainly concentrated at the −1 subsite. Families with more conserved binding amino acid residues displayed strong selectivity for their ligands, while those with fewer conserved binding amino acid residues often exhibited promiscuity when recognizing ligands. Enzymes with different activities also tended to bind different hydroxyl oxygen atoms on the ligand. These results may help us to better understand the common and unique structural bases of enzyme-ligand recognition from different families and provide a theoretical basis for the functional evolution and rational design of major lignocellulolytic enzymes.

Improving the activity of Trichoderma reesei cel7B through stabilizing the transition state

Trichoderma reesei (Tr.) cellulases, which convert cellulose to reducing sugars, are a promising catalyst used in the lignocellulosic biofuel production. Improving Tr. cellulases activity, though very difficult, is highly desired due to the recalcitrance of lignocellulose. Meanwhile, it is preferable to enhance the cellulase's promiscuity so that substrates other than cellulose can also be hydrolyzed. In this work, an attempt is made to improve the catalytic activity of a major endogluanase Tr. Cel7B against xylan which crosslinks with cellulose in lignocellulose. By using quantum mechanics/molecular mechanics (QM/MM) molecular dynamics (MD) simulations, the transition state of the xylo-oligosaccharide hydrolysis is identified. Then, mutations are introduced and their effect on the transition state stabilization is ranked based on the free energy calculations. Seven top ranked mutants are evaluated experimentally. Three mutants A208Q, A222D, and G230R show a higher activity than the wild-type Tr. Cel7B in the hydrolysis of xylan (by up to 47%) as well as filter paper (by up to 50%). The combination of the single mutants can further improve the enzyme activity. Our work demonstrates that the free energy method is effective in engineering the Tr. Cel7B activity against xylan and cellulose, and thus may also be useful for improving the activity of other Tr. cellulases. Biotechnol. Bioeng. 2016;113: 1171-1177. © 2015 Wiley Periodicals, Inc.

Characterization of the Dielectric Constant in the Trichoderma reesei Cel7B Active Site

An attempt is made to evaluate the dielectric constant of the Trichoderma reesei Cel7B active site. Through kinetic measurements, the pKa value of the catalytic acid E201 is determined. Mutations (away from E201) with net charge changes are introduced to perturb the E201 pKa. It is shown that the mutation with a +1 charge change (including G225R, G230R, and A335R) decreases the pKa of E201, whereas the mutation with a -1 charge change (including Q149E, A222D, G225D, and G230D) increases the pKa. This effect is consistent with the electrostatic interaction between the changed charge and the E201 side chain. The fitting of the experimental data yields an apparent dielectric constant of 25-80. Molecular dynamics simulations with explicit water molecules indicate that the high solvent accessibility of the active site contributes largely to the high dielectric constant. ONIOM calculations show that high dielectric constant benefits the catalysis through decreasing the energy of the transition state relative to that of the enzyme substrate complex.

Characteristics of free endoglucanase and glycosidases multienzyme complex from Fusarium verticillioides

A novel multienzyme complex, E1C, and a free endoglucanase, E2 (GH5), from Fusarium verticillioides were purified. The E1C contained two endoglucanases (GH6 and GH10), one cellobiohydrolase (GH7) and one xylanase (GH10). Maximum activity was observed at 80 °C for both enzymes and they were thermostable at 50 and 60 °C. The activation energies for E1C and E2 were 21.3 and 27.5 kJ/mol, respectively. The KM for E1C was 10.25 g/L while for E2 was 6.58 g/L. Both E1C and E2 were activated by Mn(2+) and CoCl2 while they were inhibited by SDS, CuSO4, FeCl3, AgNO4, ZnSO4 and HgCl2. E1C and E2 presented endo-β-1,3-1,4-glucanase activity. E1C presented crescent activity towards cellopentaose, cellotetraose and cellotriose. E2 hydrolyzed the substrates cellopentaose, cellotetraose and cellotriose with the same efficiency. E1C showed a higher stability and a better hydrolysis performance than E2, suggesting advantages resulting from the physical interaction between proteins.

Distinguishing xyloglucanase activity in endo-β(1→4)glucanases

The ability of β-glucanases to cleave xyloglucans, a family of highly decorated β-glucans ubiquitous in plant biomass, has traditionally been overlooked in functional biochemical studies. An emerging body of data indicates, however, that a spectrum of xyloglucan specificity resides in diverse glycoside hydrolases from a range of carbohydrate-active enzyme families-including classic "cellulase" families. This chapter outlines a series of enzyme kinetic and product analysis methods to establish degrees of xyloglucan specificity and modes of action of glycosidases emerging from enzyme discovery projects.

Structure and activity of Paenibacillus polymyxa xyloglucanase from glycoside hydrolase family 44

The enzymatic degradation of plant polysaccharides is emerging as one of the key environmental goals of the early 21st century, impacting on many processes in the textile and detergent industries as well as biomass conversion to biofuels. One of the well known problems with the use of nonstarch (nonfood)-based substrates such as the plant cell wall is that the cellulose fibers are embedded in a network of diverse polysaccharides, including xyloglucan, that renders access difficult. There is therefore increasing interest in the "accessory enzymes," including xyloglucanases, that may aid biomass degradation through removal of "hemicellulose" polysaccharides. Here, we report the biochemical characterization of the endo-β-1,4-(xylo)glucan hydrolase from Paenibacillus polymyxa with polymeric, oligomeric, and defined chromogenic aryl-oligosaccharide substrates. The enzyme displays an unusual specificity on defined xyloglucan oligosaccharides, cleaving the XXXG-XXXG repeat into XXX and GXXXG. Kinetic analysis on defined oligosaccharides and on aryl-glycosides suggests that both the -4 and +1 subsites show discrimination against xylose-appended glucosides. The three-dimensional structures of PpXG44 have been solved both in apo-form and as a series of ligand complexes that map the -3 to -1 and +1 to +5 subsites of the extended ligand binding cleft. Complex structures are consistent with partial intolerance of xylosides in the -4' subsites. The atypical specificity of PpXG44 may thus find use in industrial processes involving xyloglucan degradation, such as biomass conversion, or in the emerging exciting applications of defined xyloglucans in food, pharmaceuticals, and cellulose fiber modification.

4,6-dimethoxy-1,3,5-triazine oligoxyloglucans: novel one-step preparable substrates for studying action of endo-beta-1,4-glucanase III from Trichoderma reesei

Two kinds of 4,6-dimethoxy-1,3,5-triazine (DMT) oligoxyloglucans, DMT-beta-XXXG and DMT-beta-XLLG, have been synthesized via one-step procedure starting from the corresponding unprotected oligoxyloglucans in water. The resulting DMT derivatives were found to be hydrolyzed by endo-beta-1,4-D-glucanase III from Trichoderma reesei (EGIII) and utilized as substrates for determination of the kinetic parameters of EGIII. The present DMT-method would be a convenient analytical tool for studying the action of glycosyl hydrolases due to the extremely simple synthetic process of DMT-glycosides without using protecting groups.

Identification of protein functions using a machine-learning approach based on sequence-derived properties

Background

Predicting the function of an unknown protein is an essential goal in bioinformatics. Sequence similarity-based approaches are widely used for function prediction; however, they are often inadequate in the absence of similar sequences or when the sequence similarity among known protein sequences is statistically weak. This study aimed to develop an accurate prediction method for identifying protein function, irrespective of sequence and structural similarities.

Results

A highly accurate prediction method capable of identifying protein function, based solely on protein sequence properties, is described. This method analyses and identifies specific features of the protein sequence that are highly correlated with certain protein functions and determines the combination of protein sequence features that best characterises protein function. Thirty-three features that represent subtle differences in local regions and full regions of the protein sequences were introduced. On the basis of 484 features extracted solely from the protein sequence, models were built to predict the functions of 11 different proteins from a broad range of cellular components, molecular functions, and biological processes. The accuracy of protein function prediction using random forests with feature selection ranged from 94.23% to 100%. The local sequence information was found to have a broad range of applicability in predicting protein function.

Conclusion

We present an accurate prediction method using a machine-learning approach based solely on protein sequence properties. The primary contribution of this paper is to propose new PNPRD features representing global and/or local differences in sequences, based on positively and/or negatively charged residues, to assist in predicting protein function. In addition, we identified a compact and useful feature subset for predicting the function of various proteins. Our results indicate that sequence-based classifiers can provide good results among a broad range of proteins, that the proposed features are useful in predicting several functions, and that the combination of our and traditional features may support the creation of a discriminative feature set for specific protein functions.

Xylanases, xylanase families and extremophilic xylanases

Xylanases are hydrolytic enzymes which randomly cleave the beta 1,4 backbone of the complex plant cell wall polysaccharide xylan. Diverse forms of these enzymes exist, displaying varying folds, mechanisms of action, substrate specificities, hydrolytic activities (yields, rates and products) and physicochemical characteristics. Research has mainly focused on only two of the xylanase containing glycoside hydrolase families, namely families 10 and 11, yet enzymes with xylanase activity belonging to families 5, 7, 8 and 43 have also been identified and studied, albeit to a lesser extent. Driven by industrial demands for enzymes that can operate under process conditions, a number of extremophilic xylanases have been isolated, in particular those from thermophiles, alkaliphiles and acidiphiles, while little attention has been paid to cold-adapted xylanases. Here, the diverse physicochemical and functional characteristics, as well as the folds and mechanisms of action of all six xylanase containing families will be discussed. The adaptation strategies of the extremophilic xylanases isolated to date and the potential industrial applications of these enzymes will also be presented.

Biochemical and catalytic properties of an endoxylanase purified from the culture filtrate of Sporotrichum thermophile

An endo-beta-1,4-xylanase (1,4-beta-D-xylan xylanoxydrolase, EC 3.2.1.8) present in culture filtrates of Sporotrichum thermophile ATCC 34628 was purified to homogeneity by Q-Sepharose and Sephacryl S-200 column chromatographies. The enzyme has a molecular mass of 25,000 Da, an isoelectric point of 6.7, and is optimally active at pH 5 and at 70 degrees C. Thin-layer chromatography (TLC) analysis showed that endo-xylanase liberates mainly xylose (Xyl) and xylobiose (Xyl2) from beechwood 4-O-methyl-D-glucuronoxylan, O-acetyl-4-O-methylglucuronoxylan and rhodymenan (a beta-(1-->4)-beta(1-->3)-xylan). Also, the enzyme releases an acidic xylo-oligosaccharide from 4-O-methyl-D-glucuronoxylan, and an isomeric xylotetraose and an isomeric xylopentaose from rhodymenan. Analysis of reaction mixtures by high performance liquid chromatography (HPLC) revealed that the enzyme cleaves preferentially the internal glycosidic bonds of xylooligosaccharides, [1-3H]-xylooligosaccharides and xylan. The enzyme also hydrolyses the 4-methylumbelliferyl glycosides of beta-xylobiose and beta-xylotriose at the second glycosidic bond adjacent to the aglycon. The endoxylanase is not active on pNPX and pNPC. The enzyme mediates a decrease in the viscosity of xylan associated with a release of only small amounts of reducing sugar. The enzyme is irreversibly inhibited by series of omega-epoxyalkyl glycosides of D-xylopyranose. The results suggest that the endoxylanase from S. thermophile has catalytic properties similar to the enzymes belonging to family 11.

A novel family 8 xylanase, functional and physicochemical characterization

Xylanases are generally classified into glycosyl hydrolase families 10 and 11 and are found to frequently have an inverse relationship between their pI and molecular mass values. However, we have isolated a psychrophilic xylanase that belongs to family 8 and which has both a high pI and high molecular mass. This novel xylanase, isolated from the Antarctic bacterium Pseudoalteromonas haloplanktis, is not homologous to family 10 or 11 enzymes but has 20-30% identity with family 8 members. NMR analysis shows that this enzyme hydrolyzes with inversion of anomeric configuration, in contrast to other known xylanases which are retaining. No cellulase, chitosanase or lichenase activity was detected. It appears to be functionally similar to family 11 xylanases. It hydrolyzes xylan to principally xylotriose and xylotetraose and is most active on long chain xylo-oligosaccharides. Kinetic studies indicate that it has a large substrate binding cleft, containing at least six xylose-binding subsites. Typical psychrophilic characteristics of a high catalytic activity at low temperatures and low thermal stability are observed. An evolutionary tree of family 8 enzymes revealed the presence of six distinct clusters. Indeed classification in family 8 would suggest an (alpha/alpha)(6) fold, distinct from that of other currently known xylanases.

Biochemical characterization and mode of action of a thermostable endoglucanase purified from Thermoascus aurantiacus

A major extracellular endoglucanase purified to homogeneity from Thermoascus aurantiacus had a M(r) of 34 kDa and a pI of 3.7 and was optimally active at 70-80 degrees C and pH 4.0-4.4. It was stable at pH 2.8-6.8 at 50 degrees C for 48 h and maintained its secondary structure and folded conformation up to 70 degrees C at pH 5.0 and 2.8, respectively. A 33-amino acid sequence at the N terminus showed considerable homology with 14 microbial endoglucanases having highly conserved 8 amino acids (positions 10-17) and Gly, Pro, Gly, and Pro at positions 8, 22, 23, and 32, respectively. The enzyme is rich in Asp (15%) and Glu (10%) with a carbohydrate content of 2.7%. Polyclonal antibodies of endoglucanase cross-reacted with their own antigen and with other purified cellulases from T. aurantiacus. The endoglucanase was specific for polymeric substrates with highest activity toward carboxymethyl cellulose followed by barley beta-glucan and lichenan. It preferentially cleaved the internal glycosidic bonds of Glc(n) and MeUmbGlc(n) and possessed an extended substrate-binding site with five subsites. The data indicate that the endoglucanase from T. aurantiacus is a member of glycoside hydrolase family 5.

Kinetic parameters and mode of action of the cellobiohydrolases produced by Talaromyces emersonii

Three forms of cellobiohydrolase (EC 3.2.1.91), CBH IA, CBH IB and CBH II, were isolated to apparent homogeneity from culture filtrates of the aerobic fungus Talaromyces emersonii. The three enzymes are single sub-unit glycoproteins, and unlike most other fungal cellobiohydrolases are characterised by noteworthy thermostability. The kinetic properties and mode of action of each enzyme against polymeric and small soluble oligomeric substrates were investigated in detail. CBH IA, CBH IB and CBH II catalyse the hydrolysis of microcrystalline cellulose, albeit to varying extents. Hydrolysis of a soluble cellulose derivative (CMC) and barley 1,3;1,4-beta-D-glucan was not observed. Cellobiose (G2) is the main reaction product released by CBH IA, CBH IB, and CBH II from microcrystalline cellulose. All three CBHs are competitively inhibited by G2; inhibition constant values (K(i)) of 2.5 and 0.18 mM were obtained for CBH IA and CBH IB, respectively (4-nitrophenyl-beta-cellobioside as substrate), while a K(i) of 0.16 mM was determined for CBH II (2-chloro-4-nitrophenyl-beta-cellotrioside as substrate). Bond cleavage patterns were determined for each CBH on 4-methylumbelliferyl derivatives of beta-cellobioside and beta-cellotrioside (MeUmbG(n)). While the Tal. emersonii CBHs share certain properties with their counterparts from Trichoderma reesei, Humicola insolens and other fungal sources, distinct differences were noted.

Chemoenzymatic synthesis of a bifunctionalized cellohexaoside as a specific substrate for the sensitive assay of cellulase by fluorescence quenching

A new bifunctionalized cellohexaose derivative was synthesized as a specific substrate for continuous assay of cellulases by resonance energy transfer. This cellohexaoside has a naphthalene moiety (EDANS) as a fluorescent energy donor at the reducing end and a 4-(4'-dimethylaminobenzeneazo)-benzene derivative as an acceptor chromophore at the non-reducing end. The key steps for the preparation of the target molecule involved transglycosylation reactions of cellobiosyl and cellotetraosyl fluoride donors onto cellobiosyl acceptors catalysed by the E197A mutant of cellulase Cel7B from Humicola insolens. Upon digestion with various cellulases, the energy transfer was disrupted and an increase of fluorescence was observed.

Atomic (0.94 A) resolution structure of an inverting glycosidase in complex with substrate

The crystal structure of Clostridium thermocellum endoglucanase CelA in complex with cellopentaose has been determined at 0.94 A resolution. The oligosaccharide occupies six D-glucosyl-binding subsites, three on either side of the scissile glycosidic linkage. The substrate and product of the reaction occupy different positions at the reducing end of the cleft, where an extended array of hydrogen-bonding interactions with water molecules fosters the departure of the leaving group. Severe torsional strain upon the bound substrate forces a distorted boat(2,5) B conformation for the glucosyl residue bound at subsite -1, which facilitates the formation of an oxocarbenium ion intermediate and might favor the breakage of the sugar ring concomitant with catalysis.

Mechanism of interaction between cellulase action and applied shear force, an hypothesis

An overview is given of what is known in literature concerning the structure of both cellulose and cellulase enzymes and the enzymatic degradation of cellulose. Based on this knowledge, a hypothesis is formulated about the relation between cellulase performance and required applied shear force on the fabric. In short, the specific cellulase activity is highest on the flexible amorphous cellulose when compared to that with the more rigid crystalline cellulose. When applying cellulase activity on damaged, fuzzy fabric, the connection point of cellulose material oriented away from the fiber axis, which is partly amorphous due to the damage, will be turned again to a more rigid, mainly crystalline structure. Due to this shift, this connection point will function as a primary point of application for shear force, resulting in removal of the fuzz.

Epoxyalkyl glycosides of D-xylose and xylo-oligosaccharides are active-site markers of xylanases from glycoside hydrolase family 11, not from family 10

A series of omega-epoxyalkyl glycosides of D-xylopyranose, xylobiose and xylotriose were tested as potential active-site-directed inhibitors of xylanases from glycoside hydrolase families10 and 11. Whereas family-10 enzymes (Thermoascus aurantiacus Xyn and Clostridium thermocellum Xyn Z) are resistant toelectrophilic attack of active-site carboxyl residues, glycosidehydrolases of family 11 (Thermomyces lanuginosus Xyn and Trichoderma reesei Xyn II) are irreversibly inhibited. Theapparent inactivation and association constants (k(i), 1/K(i)) are one order of magnitude higher for thexylobiose and xylotriose derivatives. The effects of the aglycone chainlength can clearly be described. Xylobiose and n-alkyl beta-D-xylopyranosides are competitive ligands and provide protectionagainst inactivation. MS measurements showed 1:1 stoichiometries inmost labelling experiments. Electrospray ionization MS/MS analysisrevealed the nucleophile Glu(86) as the modified residue inthe T. lanuginosus xylanase when 2,3-epoxypropyl beta-D-xylopyranoside was used, whereas the acid/base catalyst Glu(178) was modified by the 3,4-epoxybutyl derivative. The active-site residues Glu(86) and Glu(177) in T. reesei Xyn II are similarly modified, confirming earlier X-raycrystallographic data [Havukainen, Törrönen, Laitinen and Rouvinen (1996)Biochemistry 35, 9617-9624]. The inability of the omega-epoxyalkyl xylo(oligo)saccharide derivatives to inactivate family-10enzymes is discussed in terms of different ligand-subsiteinteractions.

A xyloglucan-specific endo-beta-1,4-glucanase from Aspergillus aculeatus: expression cloning in yeast, purification and characterization of the recombinant enzyme

A full-length c-DNA encoding a xyloglucan-specific endo -beta-1, 4-glucanase (XEG) has been isolated from the filamentous fungus Aspergillus aculeatus by expression cloning in yeast. The colonies expressing functional XEG were identified on agar plates containing azurine-dyed cross-linked xyloglucan. The cDNA encoding XEG was isolated, sequenced, cloned into an Aspergillus expression vector, and transformed into Aspergillus oryzae for heterologous expression. The recombinant enzyme was purified to apparent homogeneity by anion-exchange and gel permeation chromatography. The recombinant XEG has a molecular mass of 23,600, an isoelectric point of 3.4, and is optimally stable at a pH of 3.4 and temperature below 30 degreesC. The enzyme hydrolyzes structurally diverse xyloglucans from various sources, but hydrolyzes no other cell wall component and can therefore be considered a xyloglucan-specific endo -beta-1, 4-glucanohydrolase. XEG hydrolyzes its substrates with retention of the anomeric configuration. The Kmof the recombinant enzyme is 3.6 mg/ml, and its specific activity is 260 micromol/min per mg protein. The enzyme was tested for its ability to solubilize xyloglucan oligosaccharides from plant cell walls. It was shown that treatment of plant cell walls with XEG yields only xyloglucan oligosaccharides, indicating that this enzyme can be a powerful tool in the structural elucidation of xyloglucans.

Stereochemical course of hydrolysis catalysed by alpha-L-rhamnosyl and alpha-D-galacturonosyl hydrolases from Aspergillus aculeatus

The stereochemical course of hydrolysis catalysed by four Aspergillus aculeatus enzymes acting on alpha-L-rhamnosyl and alpha-D-galacturonosyl linkages in the hairy regions of pectins has been determined using 1H-NMR. Exogalacturonase acts with inversion of anomeric configuration (e-->a), shown by the initial release of beta-D-GalpA from the non-reducing end of polygalacturonic acid. Similarly, rhamnogalacturonan (RG) hydrolase also acts with inversion of anomeric configuration (e-->a) during hydrolysis of alpha-D-GalpA-(1-->2)-alpha-L-Rhap linkages in RG, initially releasing oligosaccharides with beta-D-GalpA at the reducing end. This result is consistent with the recently solved crystal structure of this enzyme, as well as its classification based on amino acid sequence similarity into glycosyl hydrolase family 28. alpha-L-Rhamnosidase and RG-rhamnohydrolase also act with inversion of configuration (a-->e), initially releasing beta-L-Rhap from p-nitrophenyl alpha-L-rhamnopyranoside and RG oligosaccharides, respectively. Thus, all four enzymes examined are inverting hydrolases which probably catalyse hydrolysis via single displacement mechanisms.

The crystal structure of the catalytic core domain of endoglucanase I from Trichoderma reesei at 3.6 A resolution, and a comparison with related enzymes

Cellulose is the most abundant polymer in the biosphere. Although generally resistant to degradation, it may be hydrolysed by cellulolytic organisms that have evolved a variety of structurally distinct enzymes, cellobiohydrolases and endoglucanases, for this purpose. Endoglucanase I (EG I) is the major endoglucanase produced by the cellulolytic fungus Trichoderma reesei, accounting for 5 to 10% of the total amount of cellulases produced by this organism. Together with EG I from Humicola insolens and T. reesei cellobiohydrolase I (CBH I), the enzyme is classified into family 7 of the glycosyl hydrolases, and it catalyses hydrolysis with a net retention of the anomeric configuration. The structure of the catalytic core domain (residues 1 to 371) of EG I from T. reesei has been determined at 3.6 A resolution by the molecular replacement method using the structures of T. reesei CBH I and H. insolens EG I as search models. By employing the 2-fold non-crystallographic symmetry (NCS), the structure was refined successfully, despite the limited resolution. The final model has an R-factor of 0.201 (Rfree 0.258). The structure of EG I reveals an extended, open substrate-binding cleft, rather than a tunnel as found in the homologous cellobiohydrolase CBH I. This confirms the earlier proposal that the tunnel-forming loops in CBH I have been deleted in EG I, which has resulted in an open active site in EG I, enabling it to function as an endoglucanase. Comparison of the structure of EG I with several related enzymes reveals structural similarities, and differences that relate to their biological function in degrading particular substrates. A possible structural explanation of the drastically different pH profiles of T. reesei and H. insolens EG I is proposed.

Action patterns and mapping of the substrate-binding regions of endo-(1-->5)-alpha-L-arabinanases from Aspergillus niger and Aspergillus aculeatus

The substrate binding sites of endo-(1-->5)-alpha-L-arabinanases (EC 3.2.1.99) from Aspergillus niger and Aspergillus aculeatus were investigated using reduced and regular (1-->5)-alpha-L-arabino-oligosaccharides and high performance anion exchange chromatographic analysis. Calculation of bond cleavage frequencies and kcat/K(m) parameters for these substrates enabled the determination of the number of arabinofuranosyl binding subsites and the estimation of the binding affinities of each subsite. The A. aculeatus endo-arabinanase has six subsites arranged symmetrically around the catalytic site, while the A. niger endo-arabinanase has five subsites; two from the catalytic site towards the non-reducing end of the bound substrate and three toward the reducing end. The two subsites directly adjacent to the catalytic sites in both the A. niger and A. aculeatus endo-arabinanase have near-zero net free energy of binding. These results are unlike most glycopyranosyl endo-hydrolases studied which have net negative (unfavourable) energies of interaction at these two subsites, and may be related to the greater conformational flexibility of arabinofuranosyl residues than glycopyranosyl residues. The complete subsite maps are also rationalized with regard to the observed action patterns of these enzymes on linear (1-->5)-alpha-L-arabinan.

Substrate specificity of endoglucanases: what determines xyloglucanase activity?

Endoglucanases from Trichoderma viride differ in their activity and mode of action towards xyloglucans. In order to explain the basis for their different behavior, the number of substrate-binding sites of three endoglucanases (endoI, endoIV, and endoV) were determined using bond cleavage frequencies of both normal and reduced cellodextrins and Ko/K(m). EndoIV differed from other endoglucanases described so far, in having at least nine putative binding sites. The specificities of the three endoglucanases towards various xyloglucans derived from apple fruit and potato were determined. Also, the release of oligosaccharides from these substrates in time was monitored. It was concluded that the endoglucanases prefer to bind unbranched glucosyl residues. Because most xyloglucans are composed of XXXG-type of building units, distant subsites are needed to bind xyloglucan. Having at least nine substrate-binding sites, endoIV seems to be well equipped to degrade xyloglucans which was confirmed by its high xyloglucanase activity.

A bifunctionalized fluorogenic tetrasaccharide as a substrate to study cellulases

Cellulases are usually classified as endoglucanases and cellobiohydrolases, but the heterogeneity of cellulose, in terms of particle size and crystallinity, has always represented a problem for the biochemical characterization of the enzymes. The synthesis of a bifunctionalized tetrasaccharide substrate suitable for measuring cellulase activity by resonance energy transfer is described. The substrate, which carries a 5-(2-aminoethylamino)-1-naphthalenesulfonate group on the non-reducing end and an indolethyl group on the reducing end, was prepared from beta-lactosyl fluoride and indolethyl beta-cellobioside by a chemoenzymatic approach using the transglycosylating activity of endoglucanase I of Humicola insolens as the key step. The bifunctionalized substrate has been used for the determination of the catalytic constants of H. insolens endoglucanase I and cellobiohydrolases I and II; this substrate could be of general use to measure the kinetic constants of cellulases able to act on oligomers of degree of polymerization <5. The data also provide evidence that cellobiohydrolases I and II are able to degrade an oligosaccharide substrate carrying non-carbohydrate substituents at both ends.

Stereochemical course of hydrolysis catalyzed by arabinofuranosyl hydrolases

The stereochemical course of hydrolysis catalyzed by various enzymes acting on arabinofuranosyl linkages has been determined. 1H-NMR analysis of the action of endo-(1-->5)-alpha-L-arabinanases from Aspergillus niger and Aspergillus aculeatus showed that both hydrolyze linear arabinan with inversion of configuration, and may therefore act via a single displacement mechanism. This is consistent with the A. niger enzyme's classification in glycosyl hydrolase family 43. The catalytic mechanisms of alpha-L-arabinofuranosidases from A. niger, A. aculeatus, Aspergillus awamori, Humicola insolens, Penicillium capsulatum and Bacillus subtilis were investigated using both 1H-NMR and high performance anion exchange chromatography to follow glycosyl transfer reactions to methanol. In all cases these enzymes catalyzed the reaction with retention of configuration, and therefore probably operate via double displacement hydrolytic mechanisms. From the results with arabinofuranosidase A and B from A. niger we predict that all members of glycosyl hydrolase family 51 and 54 catalyze hydrolysis with net retention of anomeric configuration. Similar studies with (1-->4)-beta-D-arabinoxylan arabinohydrolases from A. awamori, Trichoderma reesei and Bifidobacterium adolescentis only enabled their tentative classification as inverting enzymes on the basis of their lack of glycosyl transfer to methanol.

Cello-oligosaccharide hydrolysis by cellobiohydrolase II from Trichoderma reesei. Association and rate constants derived from an analysis of progress curves

The hydrolysis of soluble cello-oligosaccharides, with a degree of polymerisation of 4-6, catalysed by cellobiohydrolase II from Trichoderma reesei was studied using 1H-NMR spectroscopy and HPLC. The experimental progress curves were analysed by fitting numerically integrated kinetic equations, which provided cleavage patterns and kinetic constants for each oligosaccharide. This analysis procedure accounts for product inhibition and avoids the initial slope approximation. No glucose was detected at the beginning of the reaction indicating that only the internal glycosidic linkages are attacked. For cellotetraose only the second glycosidic linkage was cleaved. For cellopentaose and cellohexaose the second and the third glycosidic linkage from the non-reducing end were cleaved with approximately equal probability. The degradation rates of these cello-oligosaccharides, 1-12 s-1 at 27 degrees C, are about 10-100 times faster than for the 4-methylumbelliferyl substituted analogs or for collotriose. No intermediate products larger than cellotriose were released. The degradation rate for cellotetraose were higher than its off-rate, which accounts for the processive degradation of cellohexaose. A high cellohexaose/enzyme ratio caused slow reversible inactivation of the enzyme.

Substrate specificity of endoglucanase A from Cellulomonas fimi: fundamental differences between endoglucanases and exoglucanases from family 6

Values of kcat. and Km for the hydrolysis of cellotetraose, cellotriose, beta-cellobiosyl fluoride and various beta-aryl cellobiosides by endoglucanase A (CenA) from Cellulomonas fimi indicate that specific binding interactions between the reducing-end glucose residues of cellotetraose and cellotriose and the enzyme at the transition state provide enormous stabilization, endowing glucose with the "effective leaving group ability' of 2,4-dinitrophenol. As has been seen with several other inverting glycosidases, CenA hydrolyses the "wrong' anomer of its glycosyl fluoride substrate, alpha-cellobiosyl fluoride, according to non-Michaelian kinetics. This indicates that CenA carries out this hydrolysis by a mechanism involving binding of two substrate molecules in the active site (Hehre, Brewer and Genghof (1979) J. Biol. Chem. 254, 5942-5950] in contrast with that reported for cellobiohydrolase II, another family-6 enzyme [Konstantinidis, Marsden and Sinnott (1993) Biochem. J. 291, 833-838]. The pH profiles for wild-type CenA indicate that kcat. for CenA depends on the presence of both a protonated group and a deprotonated group for full activity, consistent with the presence of an acid and a base catalyst at the active site. By contrast, the profile for the Asp252Ala mutant of CenA shows a dependence only on a base-catalytic group, thereby confirming the role of Asp-252 as an acid catalyst. These results show that hydrolysis by CenA occurs by a typical inverting mechanism involving both acid and base catalysis, as first proposed by Koshland. It also suggests that endoglucanases from family 6 may function by fundamentally different mechanisms for exoglucanases in this family.

Kinetic and stereochemical studies of manno-oligosaccharide hydrolysis catalysed by beta-mannanases from Trichoderma reesei

The two beta-mannanases from Trichoderma reesei with pI of 4.6 and 5.4, respectively, have been characterised by NMR spectroscopy. Following the kinetics of manno-oligosaccharide degradation with complete progress-curve analysis the stereospecificity and degradation pattern have been delineated. It was found that degradation of mannotriose and mannopentaose proceeds with retention of the anomeric configuration. Mannotriose degradation proceeds by almost random release of mannose. For mannopentaose there is initially no mannose formed showing that only the two middle mannosidic linkages are attacked. Progress-curve analysis shows that there is preference (70%) for cleavage of mannopentaose in such a way that mannobiose is released from the reducing end. The final product composition from the mannotriose degradation showed that transglycosylation has to be taken into account. Model calculation and progress-curve analysis showed that the transglycosylation rate is the fastest of all the rates in this system, 15 s-1 compared with mannohexaose and mannotetraose hydrolysis rates of 2 s-1 and mannotriose hydrolysis rate of 0.03 s-1 at 50 degrees C.

Crystal structure of the catalytic domain of a bacterial cellulase belonging to family 5

BACKGROUND

Cellulases are glycosyl hydrolases--enzymes that hydrolyze glycosidic bonds. They have been widely studied using biochemical and microbiological techniques and have attracted industrial interest because of their potential in biomass conversion and in the paper and textile industries. Glycosyl hydrolases have lately been assigned to specific families on the basis of similarities in their amino acid sequences. The cellulase endoglucanase A produced by Clostridium cellulolyticum (CelCCA) belongs to family 5.

RESULTS

We have determined the crystal structure of the catalytic domain of CelCCA at a resolution of 2.4 A and refined it to 1.6 A. The structure was solved by the multiple isomorphous replacement method. The overall structural fold, (alpha/beta)8, belongs to the TIM barrel motif superfamily. The catalytic centre is located at the C-terminal ends of the beta strands; the aromatic residues, forming the substrate-binding site, are arranged along a long cleft on the surface of the globular enzyme.

CONCLUSIONS

Strictly conserved residues within family 5 are described with respect to their catalytic function. The proton donor, Glu170, and the nucleophile, Glu307, are localized on beta strands IV and VII, respectively, and are separated by 5.5 A, as expected for enzymes which retain the configuration of the substrate's anomeric carbon. Structure determination of the catalytic domain of CelCCA allows a comparison with related enzymes belonging to glycosyl hydrolase families 2, 10 and 17, which also display an (alpha/beta)8 fold.

A common protein fold and similar active site in two distinct families of beta-glycanases

The structure of Clostridium thermocellum endoglucanase CelC, a member of the largest cellulase family (family A), has been determined at 2.15 A resolution. The protein folds into an (alpha/beta)8 barrel, with a deep active-site cleft generated by the insertion of a helical subdomain. The structure of the catalytic core of xylanase XynZ, which belongs to xylanase family F, has been determined at 1.4 A resolution. In spite of significant differences in substrate specificity and structure (including the absence of the helical subdomain), the general polypeptide folding pattern, architecture of the active site and catalytic mechanism of XynZ and CelC are similar, suggesting a common evolutionary origin.

Role of endoglucanases in Erwinia chrysanthemi 3937 virulence on Saintpaulia ionantha

The role of endoglucanases (endoglucanases Z and Y) in Erwinia chrysanthemi pathogenicity on Saintpaulia ionantha was assessed by mutagenizing cloned cel genes (celZ and celY) and recombining them with the chromosomal alleles. Strains with an omega interposon in celZ, a deletion in celY, or a double cel mutant were as virulent as the wild-type strain. However, in the strain with a deletion in celY, a delay in the appearance of symptoms was observed, and then maceration progressed as in plants infected with the wild-type strain, suggesting that E. chrysanthemi endoglucanases play a minor role in soft rot disease development.