Optimization of solvation models for predicting the structure of surface loops in proteins

A novel Omp25-binding peptide screened by phage display can inhibit Brucella abortus 2308 infection in vitro and in vivo

Brucellosis is a globally distributed zoonotic disease affecting animals and humans, and current antibiotic and vaccine strategies are not optimal. The surface-exposed protein Omp25 is involved in Brucella virulence and plays an important role in Brucella pathogenesis during infection, suggesting that Omp25 could be a useful target for selecting potential therapeutic molecules to inhibit Brucella pathogenesis. In this study, we identified, we believe for the first time, peptides that bind specifically to the Omp25 protein of pathogens, using a phage panning technique, After four rounds of panning, 42 plaques of eluted phages were subjected to pyrosequencing. Four phage clones that bound better than the other clones were selected following confirmation by ELISA and affinity constant determination. The peptides selected could significantly inhibit Brucella abortus 2308 (S2308) internalization and intracellular growth in RAW264.7 macrophages, and significantly induce secretion of TNF-α and IL-12 in peptide- and S2308-treated cells. Any observed peptide (OP11, OP27, OP35 or OP40) could significantly inhibit S2308 infection in BALB/c mice. Moreover, the peptide OP11 was the best candidate peptide for inhibiting S2308 infection in vitro and in vivo. These results suggest that peptide OP11 has potential for exploitation as a peptide drug in resisting S2308 infection.

Development of a new physics-based internal coordinate mechanics force field and its application to protein loop modeling

We report the development of internal coordinate mechanics force field (ICMFF), new force field parameterized using a combination of experimental data for crystals of small molecules and quantum mechanics calculations. The main features of ICMFF include: (a) parameterization for the dielectric constant relevant to the condensed state (ε = 2) instead of vacuum, (b) an improved description of hydrogen-bond interactions using duplicate sets of van der Waals parameters for heavy atom-hydrogen interactions, and (c) improved backbone covalent geometry and energetics achieved using novel backbone torsional potentials and inclusion of the bond angles at the C(α) atoms into the internal variable set. The performance of ICMFF was evaluated through loop modeling simulations for 4-13 residue loops. ICMFF was combined with a solvent-accessible surface area solvation model optimized using a large set of loop decoys. Conformational sampling was carried out using the biased probability Monte Carlo method. Average/median backbone root-mean-square deviations of the lowest energy conformations from the native structures were 0.25/0.21 Å for four residues loops, 0.84/0.46 Å for eight residue loops, and 1.16/0.73 Å for 12 residue loops. To our knowledge, these results are significantly better than or comparable with those reported to date for any loop modeling method that does not take crystal packing into account. Moreover, the accuracy of our method is on par with the best previously reported results obtained considering the crystal environment. We attribute this success to the high accuracy of the new ICM force field achieved by meticulous parameterization, to the optimized solvent model, and the efficiency of the search method.

Loop simulations

Loop modeling is crucial for high-quality homology model construction outside conserved secondary structure elements. Dozens of loop modeling protocols involving a range of database and ab initio search algorithms and a variety of scoring functions have been proposed. Knowledge-based loop modeling methods are very fast and some can successfully and reliably predict loops up to about eight residues long. Several recent ab initio loop simulation methods can be used to construct accurate models of loops up to 12-13 residues long, albeit at a substantial computational cost. Major current challenges are the simulations of loops longer than 12-13 residues, the modeling of multiple interacting flexible loops, and the sensitivity of the loop predictions to the accuracy of the loop environment.

New computational method for prediction of interacting protein loop regions

Flexible loop regions of proteins play a crucial role in many biological functions such as protein-ligand recognition, enzymatic catalysis, and protein-protein association. To date, most computational methods that predict the conformational states of loops only focus on individual loop regions. However, loop regions are often spatially in close proximity to one another and their mutual interactions stabilize their conformations. We have developed a new method, titled CorLps, capable of simultaneously predicting such interacting loop regions. First, an ensemble of individual loop conformations is generated for each loop region. The members of the individual ensembles are combined and are accepted or rejected based on a steric clash filter. After a subsequent side-chain optimization step, the resulting conformations of the interacting loops are ranked by the statistical scoring function DFIRE that originated from protein structure prediction. Our results show that predicting interacting loops with CorLps is superior to sequential prediction of the two interacting loop regions, and our method is comparable in accuracy to single loop predictions. Furthermore, improved predictive accuracy of the top-ranked solution is achieved for 12-residue length loop regions by diversifying the initial pool of individual loop conformations using a quality threshold clustering algorithm.

The effect of loops on the structural organization of alpha-helical membrane proteins

Loops connecting the transmembrane (TM) alpha-helices in membrane proteins are expected to affect the structural organization of the thereby connected helices and the helical bundles as a whole. This effect, which has been largely ignored previously, is studied here by analyzing the x-ray structures of 41 alpha-helical membrane proteins. First we define the loop flexibility ratio, R, and find that 53% of the loops are stretched, where a stretched loop constrains the distance between the two connected helices. The significance of this constraining effect is supported by experiments carried out with bacteriorhodopsin and rhodopsin, in which cutting or eliminating their (predominately stretched) loops has led to a decrease in protein stability, and for rhodopsin, in most cases, also to the destruction of the structure. We show that for nonstretched loops in the extramembranous regions, the fraction of hydrophobic residues is comparable to that for soluble proteins; furthermore (as is also the case for soluble proteins), the hydrophobic residues in these regions are preferentially buried. This is expected to lead to the compact structural organization of the loops, which is transferred to the TM helices, causing them to assemble. We argue that a soluble protein complexed with a membrane protein similarly promotes compactness; other properties of such complexes are also studied. We calculate complementary attractive interactions between helices, including hydrogen bonds and van der Waals interactions of sequential motifs, such as GXXXG. The relative and combined effects of all these factors on the association of the TM helices are discussed and protein structures with only a few of these factors are analyzed. Our study emphasizes the need for classifying membrane proteins into groups according to structural organization. This classification should be considered when procedures for structural analysis or prediction are developed and applied. Detailed analysis of each structure is provided at http://flan.blm.cs.cmu.edu/memloop/

Prediction of protein loop structures using a local move Monte Carlo approach and a grid-based force field

We have developed an improved local move Monte Carlo (LMMC) loop sampling approach for loop predictions. The method generates loop conformations based on simple moves of the torsion angles of side chains and local moves of backbone of loops. To reduce the computational costs for energy evaluations, we developed a grid-based force field to represent the protein environment and solvation effect. Simulated annealing has been used to enhance the efficiency of the LMMC loop sampling and identify low-energy loop conformations. The prediction quality is evaluated on a set of protein loops with known crystal structure that has been previously used by others to test different loop prediction methods. The results show that this approach can reproduce the experimental results with the root mean square deviation within 1.8 A for all the test cases. The LMMC loop prediction approach developed here could be useful for improvement in the quality the loop regions in homology models, flexible protein-ligand and protein-protein docking studies.

Use of decoys to optimize an all-atom force field including hydration

A novel method of parameter optimization is proposed. It makes use of large sets of decoys generated for six nonhomologous proteins with different architecture. Parameter optimization is achieved by creating a free energy gap between sets of nativelike and nonnative conformations. The method is applied to optimize the parameters of a physics-based scoring function consisting of the all-atom ECEPP05 force field coupled with an implicit solvent model (a solvent-accessible surface area model). The optimized force field is able to discriminate near-native from nonnative conformations of the six training proteins when used either for local energy minimization or for short Monte Carlo simulated annealing runs after local energy minimization. The resulting force field is validated with an independent set of six nonhomologous proteins, and appears to be transferable to proteins not included in the optimization; i.e., for five out of the six test proteins, decoys with 1.7- to 4.0-A all-heavy-atom root mean-square deviations emerge as those with the lowest energy. In addition, we examined the set of misfolded structures created by Park and Levitt using a four-state reduced model. The results from these additional calculations confirm the good discriminative ability of the optimized force field obtained with our decoy sets.

Minimal molecular surfaces and their applications

This article presents a novel concept, the minimal molecular surface (MMS), for the theoretical modeling of biomolecules. The MMS can be viewed as a result of the surface free energy minimization when an apolar molecule, such as protein, DNA or RNA is immersed in a polar solvent. Based on the theory of differential geometry, the MMS is created via the mean curvature minimization of molecular hypersurface functions. A detailed numerical algorithm is presented for the practical generation of MMSs. Extensive numerical experiments, including those with internal and open cavities, are carried out to demonstrated the proposed concept and algorithms. The proposed MMS is typically free of geometric singularities. Application of the MMS to the electrostatic analysis is considered for a set of twenty six proteins.

Optimization of the GB/SA solvation model for predicting the structure of surface loops in proteins

Implicit solvation models are commonly optimized with respect to experimental data or Poisson-Boltzmann (PB) results obtained for small molecules, where the force field is sometimes not considered. In previous studies, we have developed an optimization procedure for cyclic peptides and surface loops in proteins based on the entire system studied and the specific force field used. Thus, the loop has been modeled by the simplified solvation function E(tot) = E(FF) (epsilon = 2r) + Sigma(i) sigma(i)A(i), where E(FF) (epsilon = nr) is the AMBER force field energy with a distance-dependent dielectric function, epsilon = nr, A(i) is the solvent accessible surface area of atom i, and sigma(i) is its atomic solvation parameter. During the optimization process, the loop is free to move while the protein template is held fixed in its X-ray structure. To improve on the results of this model, in the present work we apply our optimization procedure to the physically more rigorous solvation model, the generalized Born with surface area (GB/SA) (together with the all-atom AMBER force field) as suggested by Still and co-workers (J. Phys. Chem. A 1997, 101, 3005). The six parameters of the GB/SA model, namely, P(1)-P(5) and the surface area parameter, sigma (programmed in the TINKER package) are reoptimized for a "training" group of nine loops, and a best-fit set is defined from the individual sets of optimized parameters. The best-fit set and Still's original set of parameters (where Lys, Arg, His, Glu, and Asp are charged or neutralized) were applied to the training group as well as to a "test" group of seven loops, and the energy gaps and the corresponding RMSD values were calculated. These GB/SA results based on the three sets of parameters have been found to be comparable; surprisingly, however, they are somewhat inferior (e.g, of larger energy gaps) to those obtained previously from the simplified model described above. We discuss recent results for loops obtained by other solvation models and potential directions for future studies.

Minimalist explicit solvation models for surface loops in proteins

We have performed molecular dynamics simulations of protein surface loops solvated by explicit water, where a prime focus of the study is the small numbers (e.g., ~100) of explicit water molecules employed. The models include only part of the protein (typically 500 - 1000 atoms), and the water molecules are restricted to a region surrounding the loop. In this study, the number of water molecules (N(w)) is systematically varied, and convergence with large N(w) is monitored to reveal N(w)(min), the minimum number required for the loop to exhibit realistic (fully hydrated) behavior. We have also studied protein surface coverage, as well as diffusion and residence times for water molecules as a function of N(w). A number of other modeling parameters are also tested. These include the number of environmental protein atoms explicitly considered in the model, as well as two ways to constrain the water molecules to the vicinity of the loop (where we find one of these methods to perform better when N(w) is small). The results (for RMSD and its fluctuations for four loops) are further compared to much larger, fully solvated systems (using ~10,000 water molecules under periodic boundary conditions and Ewald electrostatics), and to results for the GBSA implicit solvation model. We find that the loop backbone can stabilize with a surprisingly small number of water molecules (as low as 5 molecules per amino acid residue). The side chains of the loop require somewhat larger N(w), where the atomic fluctuations become too small if N(w) is further reduced. Thus, in general, we find adequate hydration to occur at roughly 12 water molecules per residue. This is an important result, because at this hydration level, computational times are comparable to those required for GBSA. Therefore these "minimalist explicit models" can provide a viable and potentially more accurate alternative. The importance of protein loop modeling is discussed in the context of these, and other, loop models, along with other challenges including the relevance of appropriate free energy simulation methodology for assessment of conformational stability.

A hierarchical approach to all-atom protein loop prediction

The application of all-atom force fields (and explicit or implicit solvent models) to protein homology-modeling tasks such as side-chain and loop prediction remains challenging both because of the expense of the individual energy calculations and because of the difficulty of sampling the rugged all-atom energy surface. Here we address this challenge for the problem of loop prediction through the development of numerous new algorithms, with an emphasis on multiscale and hierarchical techniques. As a first step in evaluating the performance of our loop prediction algorithm, we have applied it to the problem of reconstructing loops in native structures; we also explicitly include crystal packing to provide a fair comparison with crystal structures. In brief, large numbers of loops are generated by using a dihedral angle-based buildup procedure followed by iterative cycles of clustering, side-chain optimization, and complete energy minimization of selected loop structures. We evaluate this method by using the largest test set yet used for validation of a loop prediction method, with a total of 833 loops ranging from 4 to 12 residues in length. Average/median backbone root-mean-square deviations (RMSDs) to the native structures (superimposing the body of the protein, not the loop itself) are 0.42/0.24 A for 5 residue loops, 1.00/0.44 A for 8 residue loops, and 2.47/1.83 A for 11 residue loops. Median RMSDs are substantially lower than the averages because of a small number of outliers; the causes of these failures are examined in some detail, and many can be attributed to errors in assignment of protonation states of titratable residues, omission of ligands from the simulation, and, in a few cases, probable errors in the experimentally determined structures. When these obvious problems in the data sets are filtered out, average RMSDs to the native structures improve to 0.43 A for 5 residue loops, 0.84 A for 8 residue loops, and 1.63 A for 11 residue loops. In the vast majority of cases, the method locates energy minima that are lower than or equal to that of the minimized native loop, thus indicating that sampling rarely limits prediction accuracy. The overall results are, to our knowledge, the best reported to date, and we attribute this success to the combination of an accurate all-atom energy function, efficient methods for loop buildup and side-chain optimization, and, especially for the longer loops, the hierarchical refinement protocol.

High-resolution prediction of protein helix positions and orientations

We have developed a new method for predicting helix positions in globular proteins that is intended primarily for comparative modeling and other applications where high precision is required. Unlike helix packing algorithms designed for ab initio folding, we assume that knowledge is available about the qualitative placement of all helices. However, even among homologous proteins, the corresponding helices can demonstrate substantial differences in positions and orientations, and for this reason, improperly positioned helices can contribute significantly to the overall backbone root-mean-square deviation (RMSD) of comparative models. A helix packing algorithm for use in comparative modeling must obtain high precision to be useful, and for this reason we utilize an all-atom protein force field (OPLS) and a Generalized Born continuum solvent model. To reduce the computational expense associated with using a detailed, physics-based energy function, we have developed new hierarchical and multiscale algorithms for sampling the helices and flanking loops. We validate the method using a test suite of 33 cases, which are drawn from a diverse set of high-resolution crystal structures. The helix positions are reproduced with an average backbone RMSD of 0.6 A, while the average backbone RMSD of the complete loop-helix-loop region (i.e., the helix with the surrounding loops, which are also repredicted) is 1.3 A.

Effective scoring function for protein sequence design

We have developed an effective scoring function for protein design. The atomic solvation parameters, together with the weights of energy terms, were optimized so that residues corresponding to the native sequence were predicted with low energy in the training set of 28 protein structures. The solvation energy of non-hydrogen-bonded hydrophilic atoms was considered separately and expressed in a nonlinear way. As a result, our scoring function predicted native residues as the most favorable in 59% of the total positions in 28 proteins. We then tested the scoring function by comparing the predicted stability changes for 103 T4 lysozyme mutants with the experimental values. The correlation coefficients were 0.77 for surface mutations and 0.71 for all mutations. Finally, the scoring function combined with Monte Carlo simulation was used to predict favorable sequences on a fixed backbone. The designed sequences were similar to the natural sequences of the family to which the template structure belonged. The profile of the designed sequences was helpful for identification of remote homologues of the native sequence.

Discrimination of native loop conformations in membrane proteins: decoy library design and evaluation of effective energy scoring functions

The recent determination of crystal structures for several important membrane proteins opens the way for comparative modeling of their membrane-spanning regions. However, the ability to predict correctly the structures of loop regions, which may be critical, for example, in ligand binding, remains a considerable challenge. To meet this challenge, accurate scoring methods have to discriminate between candidate conformations of an unknown loop structure. Some success in loop prediction has been reported for globular proteins; however, the proximity of membrane protein loops to the lipid bilayer casts doubt on the applicability of the same scoring methods to this problem. In this work, we develop "decoy libraries" of non-native folds generated, using the structures of two membrane proteins, with molecular dynamics and Monte Carlo techniques over a range of temperatures. We introduce a new approach for decoy library generation by constructing a flat distribution of conformations covering a wide range of Calpha-root-mean-square deviation (RMSD) from the native structure; this removes possible bias in subsequent scoring stages. We then score these decoy conformations with effective energy functions, using increasingly more cpu-intensive implicit solvent models, including (1) simple Coulombic electrostatics with constant or distance-dependent dielectrics; (2) atomic solvation parameters; (3) the effective energy function (EEF1) of Lazaridis and Karplus; (4) generalized Born/Analytical Continuum Solvent; and (5) finite-difference Poisson-Boltzmann energy functions. We show that distinction of native-like membrane protein loops may be achieved using effective energies with the assumption of a homogenous environment; thus, the absence of the adjacent lipid bilayer does not affect the scoring ability. In particular, the Analytical Continuum Solvent and finite-difference Poisson-Boltzmann energy functions are seen to be the most powerful scoring functions. Interestingly, the use of the uncharged states of ionizable sidechains is shown to aid prediction, particularly for the simplest energy functions.

Performance of hybrid methods for large-scale unconstrained optimization as applied to models of proteins

Energy minimization plays an important role in structure determination and analysis of proteins, peptides, and other organic molecules; therefore, development of efficient minimization algorithms is important. Recently, Morales and Nocedal developed hybrid methods for large-scale unconstrained optimization that interlace iterations of the limited-memory BFGS method (L-BFGS) and the Hessian-free Newton method (Computat Opt Appl 2002, 21, 143-154). We test the performance of this approach as compared to those of the L-BFGS algorithm of Liu and Nocedal and the truncated Newton (TN) with automatic preconditioner of Nash, as applied to the protein bovine pancreatic trypsin inhibitor (BPTI) and a loop of the protein ribonuclease A. These systems are described by the all-atom AMBER force field with a dielectric constant epsilon = 1 and a distance-dependent dielectric function epsilon = 2r, where r is the distance between two atoms. It is shown that for the optimal parameters the hybrid approach is typically two times more efficient in terms of CPU time and function/gradient calculations than the two other methods. The advantage of the hybrid approach increases as the electrostatic interactions become stronger, that is, in going from epsilon = 2r to epsilon = 1, which leads to a more rugged and probably more nonlinear potential energy surface. However, no general rule that defines the optimal parameters has been found and their determination requires a relatively large number of trial-and-error calculations for each problem.

MOPED: method for optimizing physical energy parameters using decoys

We present a method called MOPED for optimizing energetic and structural parameters in computational models, including all-atom energy functions, when native structures and decoys are given. The present method goes beyond previous approaches in treating energy functions that are nonlinear in the parameters and continuous in the degrees of freedom. We illustrate the method by improving solvation parameters in the energy function EEF1, which consists of the CHARMM19 polar hydrogen force field augmented by a Gaussian solvation term. Although the published parameters for EEF1 correctly discriminate the native from decoys in the decoy sets of Levitt et al., they fail on several of the more difficult decoy sets of Baker et al. MOPED successfully finds improved parameters that allow EEF1 to discriminate native from decoy structures on all protein structures that do not have metals or prosthetic groups.

In vitro effect of a thrombin inhibition peptide selected by phage display technology

A repeated selection of phages from a cyclic heptapeptide phage display library resulted in the enrichment of phages that bind to human alpha-thrombin. One clone of the binding phages that competed with PPACK for binding to thrombin and that had the best binding characteristics was chosen. The amino acid sequence of the peptide displayed on this phage was determined and a peptide with the sequence, Cys-Asn-Arg-Pro-Phe-Ile-Pro-Thr-Cys was synthesised. This peptide, thrombin-inhibiting peptide (TIP), is a full competitive inhibitor of thrombin with an inhibition constant (K(i)) of 0.4974 mM. It lengthened the thrombin time and inhibited thrombin-induced platelet activation and the platelet release reaction, both in a dose-dependent manner. It also reduced platelet adhesion onto a human microvascular endothelial matrix in the parallel plate flow chamber under both arterial and venous shear conditions. Thus, we have selected and synthesised a cyclic heptapeptide that competes with PPACK to bind to thrombin and that can be developed as a direct antithrombin.

Novel computer program for fast exact calculation of accessible and molecular surface areas and average surface curvature

New computer programs, SurfRace and FastSurf, perform fast calculations of the solvent accessible and molecular (solvent excluded) surface areas of macromolecules. Program SurfRace also calculates the areas of cavities inaccessible from the outside. We introduce the definition of average curvature of molecular surface and calculate average molecular surface curvatures for each atom in a structure. All surface area and curvature calculations are analytic and therefore yield exact values of these quantities. High calculation speed of this software is achieved primarily by avoiding computationally expensive mathematical procedures wherever possible and by efficient handling of surface data structures. The programs are written initially in the language C for PCs running Windows 2000/98/NT, but their code is portable to other platforms with only minor changes in input-output procedures. The algorithm is robust and does not ignore either multiplicity or degeneracy of atomic overlaps. Fast, memory-efficient and robust execution make this software attractive for applications both in computationally expensive energy minimization algorithms, such as docking or molecular dynamics simulations, and in stand-alone surface area and curvature calculations.