Purification, crystallization, and preliminary X-ray analysis of Bacillus subtilis ferrochelatase

Structure model of ferrochelatase from Salmonella Typhi elucidating metalation mechanism

A homology model of ferrochelatase (HemH), the heme biosynthesis terminal step enzyme from Salmonella Typhi was generated to understand the mechanism of metal insertion into protoporphyrin IX for heme biosynthesis. The overall fold of membrane associated ferrochelatase (StFc) from S. Typhi is similar to human and Yeast ferrochelatase than Bacillus subtilis, and Bacillus anthracis. An insertion of 16 amino acid residues in helical switch having hydrophobic patch proposed to interact with membrane lipids and in opening and closing of heme binding cleft. The sequence analysis and the docking study revealed that the protoporphyrin binding site in StFc has a crucial replacement of Tyr/Met to Leu13 unique in comparison to other known structures, where Tyr13 observed in B. subtilis/B. anthracis while Met76 in human/yeast play important role in holding protoporphyrin in optimal orientation for metalation. A sitting-a-top (SAT) complex mechanism for metalation is proposed with His194 and Glu264 lie at the bottom and Leu13 on the top of the porphyrin ring. In addition, an entry and exit mechanism is also proposed for protoporphyrin binding into cavity by opening and closing of helical switch using molecular dynamics simulation studies of Apo and heme complexed model structure of S. Typhi HemH.

Ferrochelatase π-helix: Implications from examining the role of the conserved π-helix glutamates in porphyrin metalation and product release

Protoporphyrin ferrochelatase catalyzes the insertion of Fe²⁺ into protoporphyrin IX to form heme. To determine whether a conserved, active site π-helix contributes to the translocation of the metal ion substrate to the ferrochelatase-bound porphyrin substrate, the invariant π-helix glutamates were replaced with amino acids with non-negatively charged side chains, and the kinetic mechanisms of the generated variants were examined. Analysis of yeast wild-type ferrochelatase-, E314Q- and E318Q-catalyzed reactions, under multi- and single-turnover conditions, demonstrated that the mutations of the π-helix glutamates hindered both protoporphyrin metalation and release of the metalated porphyrin, by slowing each step by approximately 30-50%. Protoporphyrin metalation occurred with an apparent pK_a of 7.3 ± 0.1, which was assigned to binding of Fe²⁺ by deprotonated Glu-314 and Glu-314-assisted Fe²⁺ insertion into the porphyrin ring. We propose that unwinding of the π-helix concomitant with the adoption of a protein open conformation positions the deprotonated Glu-314 to bind Fe²⁺ from the surface of the enzyme. Transition to the closed conformation, with π-helix winding, brings Glu-314-bound Fe²⁺ to the active site for incorporation into protoporphyrin.

Crosstalk between metal ions in Bacillus subtilis ferrochelatase

Ferrochelatase (EC 4.99.1.1), the terminal enzyme in the heme biosynthetic pathway, catalyzes the insertion of Fe2+ into protoporphyrin IX, generating heme. In vitro assays have shown that all characterized ferrochelatases can also incorporate Zn2+ into protoporphyrin IX. Previously Zn2+ has been observed at an inner metal binding site close to the porphyrin binding site. Mg2+, which stimulates Zn2+ insertion by Bacillus subtilis ferrochelatase, has been observed at an outer metal binding site. Exchange of Glu272 to a serine eliminated the stimulative effect of Mg2+. We found that Zn2+ quenched the fluorescence of B. subtilis ferrochelatase and this quenching was used to estimate the metal affinity. Trp230 was identified as the intrinsic fluorophore responsible for the observed quenching pattern. The affinity for Zn2+ could be increased by incubating the ferrochelatase with the transition state analogue N-methyl mesoporphyrin IX, which reflected a close collaborative arrangement between the two substrates in the active site. We also showed that the affinity for Zn2+ was lowered in the presence of Mg2+ and that bound Zn2+ was released upon binding of Mg2+. In the ferrochelatase with a Glu272Ser modification, the interaction between Zn2+ and Mg2+ was abolished. It could thereby be demonstrated that the presence of a metal at one metal binding site affected the metal affinity of another, providing the enzyme with a site that regulates the enzymatic activity.

Metallation of the Transition-state Inhibitor N-methyl Mesoporphyrin by Ferrochelatase: Implications for the Catalytic Reaction Mechanism

Insertion of metals into various tetrapyrroles is catalysed by a group of enzymes called chelatases, e.g. nickel, cobalt, magnesium and ferro-chelatase. It has been proposed that catalytic metallation includes distorting the porphyrin substrate by the enzyme towards a transition state-like geometry in which at least one of the pyrrole rings will be available for metal chelation. Here, we present a study of metal insertion into the transition-state inhibitor of protoporphyrin IX ferrochelatase, N-methyl mesoporphyrin (N-MeMP), by time-resolved crystallography and mass spectrometry with and without the presence of ferrochelatase. The results show that metallation of N-MeMP has a very limited effect on the conformation of the residues that participate in porphyrin and metal binding. These findings support theoretical data, which indicate that product release is controlled largely by the strain created by metal insertion into the distorted porphyrin. The results suggest that, similar to non-catalytic metallation of N-MeMP, the ferrochelatase-assisted metallation depends on the ligand exchange rate for the respective metal. Moreover, ferrochelatase catalyses insertion of Cu(II) and Zn(II) into N-MeMP with a rate that is about 20 times faster than non-enzymatic metallation in solution, suggesting that the catalytic strategy of ferrochelatase includes a stage of acceleration of the rate of ligand exchange for the metal substrate. The greater efficiency of N-MeMP metallation by Cu(II), as compared to Zn(II), contrasts with the K(m) values for Zn(II) (17 microM) and Cu(II) (170 microM) obtained for metallation of protoporphyrin IX. We suggest that this difference in metal specificity depends on the type of distortion imposed by the enzyme on protoporphyrin IX, which is different from the intrinsic non-planar distortion of N-MeMP. A mechanism of control of metal specificity by porphyrin distortion may be general for different chelatases, and may have common features with the mechanism of metal specificity in crown ethers.

Metal binding to Bacillus subtilis ferrochelatase and interaction between metal sites

Ferrochelatase, the terminal enzyme in heme biosynthesis, catalyses metal insertion into protoporphyrin IX. The location of the metal binding site with respect to the bound porphyrin substrate and the mode of metal binding are of central importance for understanding the mechanism of porphyrin metallation. In this work we demonstrate that Zn(2+), which is commonly used as substrate in assays of the ferrochelatase reaction, and Cd(2+), an inhibitor of the enzyme, bind to the invariant amino acids His183 and Glu264 and water molecules, all located within the porphyrin binding cleft. On the other hand, Mg(2+), which has been shown to bind close to the surface at 7 A from His183, was largely absent from its site. Activity measurements demonstrate that Mg(2+) has a stimulatory effect on the enzyme, lowering K(M) for Zn(2+) from 55 to 24 micro M. Changing one of the Mg(2+) binding residues, Glu272, to serine abolishes the effect of Mg(2+). It is proposed that prior to metal insertion the metal may form a sitting-atop (SAT) complex with the invariant His-Glu couple and the porphyrin. Metal binding to the Mg(2+) site may stimulate metal release from the protein ligands and its insertion into the porphyrin.

In vivo and in vitro studies of Bacillus subtilis ferrochelatase mutants suggest substrate channeling in the heme biosynthesis pathway

Ferrochelatase (EC 4.99.1.1) catalyzes the last reaction in the heme biosynthetic pathway. The enzyme was studied in the bacterium Bacillus subtilis, for which the ferrochelatase three-dimensional structure is known. Two conserved amino acid residues, S54 and Q63, were changed to alanine by site-directed mutagenesis in order to detect any function they might have. The effects of these changes were studied in vivo and in vitro. S54 and Q63 are both located at helix alpha3. The functional group of S54 points out from the enzyme, while Q63 is located in the interior of the structure. None of these residues interact with any other amino acid residues in the ferrochelatase and their function is not understood from the three-dimensional structure. The exchange S54A, but not Q63A, reduced the growth rate of B. subtilis and resulted in the accumulation of coproporphyrin III in the growth medium. This was in contrast to the in vitro activity measurements with the purified enzymes. The ferrochelatase with the exchange S54A was as active as wild-type ferrochelatase, whereas the exchange Q63A caused a 16-fold reduction in V(max). The function of Q63 remains unclear, but it is suggested that S54 is involved in substrate reception or delivery of the enzymatic product.

Structural and mechanistic basis of porphyrin metallation by ferrochelatase

Ferrochelatase, the enzyme catalyzing metallation of protoporphyrin IX at the terminal step of heme biosynthesis, was co-crystallized with an isomer mixture of the potent inhibitor N-methylmesoporphyrin (N-MeMP). The X-ray structure revealed the active site of the enzyme, to which only one of the isomers was bound, and for the first time allowed characterization of the mode of porphyrin macrocycle distortion by ferrochelatase. Crystallization of ferrochelatase and N-MeMP in the presence of Cu(2+) leads to metallation and demethylation of N-MeMP. A mechanism of porphyrin distortion is proposed, which assumes that the enzyme holds pyrrole rings B, C and D in a vice-like grip and forces a 36 degrees tilt on ring A.

Crystal structure of ferrochelatase: the terminal enzyme in heme biosynthesis

BACKGROUND

The metallation of closed ring tetrapyrroles resulting in the formation of hemes, chlorophylls and vitamin B12 is catalyzed by specific enzymes called chelatases. Ferrochelatase catalyzes the terminal step in heme biosynthesis by inserting ferrous ion into protoporphyrin IX by a mechanism that is poorly understood. Mutations in the human gene for ferrochelatase can result in the disease erythropoietic protoporphyria, and a further understanding of the mechanism of this enzyme is therefore of clinical interest. No three-dimensional structure of a tetrapyrrole metallation enzyme has been available until now.

RESULTS

The three-dimensional structure of Bacillus subtilis ferrochelatase has been determined at 1.9 A resolution by the method of multiple isomorphous replacement. The structural model contains 308 of the 310 amino acid residues of the protein and 198 solvent molecules. The polypeptide is folded into two similar domains each with a four-stranded parallel beta sheet flanked by alpha helices. Structural elements from both domains build up a cleft, which contains several amino acid residues that are invariant in ferrochelatases from different organisms. In crystals soaked with gold and cadmium salt solutions, the metal ion was found to be coordinated to the conserved residue His 183, which is located in the cleft. This histidine residue has previously been suggested to be involved in ferrous ion binding.

CONCLUSIONS

Ferrochelatase seems to have a structurally conserved core region that is common to the enzyme from bacteria, plants and mammals. We propose that porphyrin binds in the identified cleft; this cleft also includes the metal-binding site of the enzyme. It is likely that the structure of the cleft region will have different conformations upon substrate binding and release.

Probing the active-site residues in Saccharomyces cerevisiae ferrochelatase by directed mutagenesis. In vivo and in vitro analyses

Ferrochelatase is a mitochondrial inner membrane-bound enzyme that catalyzes the insertion of ferrous iron into protoporphyrin, the terminal step in protoheme biosynthesis. The functional/structural roles of 10 invariant amino acid residues were investigated by site-directed mutagenesis in the yeast Saccharomyces cerevisiae ferrochelatase. The mutant enzymes were expressed in a yeast strain lacking the ferrochelatase gene HEM15 and in Escherichia coli. The kinetic parameters of the mutant enzymes were determined for the enzymes associated with the yeast membranes and the enzymes in the bacterial soluble fraction. They were compared with the in vivo functioning of the mutant enzymes. The main conclusions are the following. Glu-314 is critical for catalysis, and we suggest that it is the base responsible for abstracting the N-pyrrole proton(s). His-235 is essential for metal binding. Asp-246 and Tyr-248 are also involved in metal binding in a synergistic manner. The Km for protoporphyrin was also increased in the H235L, D246A, and Y248L mutants, suggesting that the binding sites of the two substrates are not independent of each other. The R87A, Y95L, Q111E, Q273E, W282L, and F308A mutants had 1.2-2-fold increased Vm and 4-10-fold increased Km values for protoporphyrin, but the amount of heme made in vivo was 10-100% of the normal value. These mutations probably affected the geometry of the active center, resulting in improper positioning of protoporphyrin.