Simplified analysis of glyphosate and aminomethylphosphonic acid in water, vegetation and soil by liquid chromatography-tandem mass spectrometry

Quantitation of glyphosate, glufosinate, and AMPA in drinking water and surface waters using direct injection and charged-surface ultra-high performance liquid chromatography-tandem mass spectrometry

Herbicides glyphosate (N-(phosphonomethyl)glycine) and glufosinate (2-amino-4-(hydroxymethylphosphinyl)butanoic acid) and the main transformation product of glyphosate, aminomethanephosphonic acid (AMPA), are challenging to analyze for in environmental samples. The quantitative method developed by this study adapts previously standardized dechlorination procedures coupled to a novel charged surface C18 column, ultra-high performance liquid chromatography-tandem mass spectrometry, polarity switching, and direct injection. The method was applied to chlorinated tap water, as well as river samples, collected in the City of Winnipeg and rural Manitoba, Canada. Using only syringe filtration without derivatization, the validated method resulted in good accuracies in both tap and surface water, at both 2 and 20 μg L-1. Method limits of detection (MLD) and quantification (MLQ) ranged from 0.022/0.074 to 0.11/0.36 μg L-1, with precisions of 0.46-2.2% (intraday) and 1.3-7.3% (interday). The mean (SEM) of the pesticides in μg L-1 for tap water were 0.11 (0.007) (AMPA), glufosinate and glyphosate < MLDs; and for Red River water were 0.56 (0.045) (AMPA), glufosinate < MLQ, and glyphosate 0.40 (0.072). For the smaller tributaries, glufosinate was >MLD but < MLQ once and that was for Shannon Creek at 0.2 μg L-1. For the remaining rivers, the mean concentrations ranged from 0.31 to 3.1 μg L-1 for AMPA, and 0.087-0.53 μg L-1 for glyphosate. The method will be ideal for supporting monitoring and risk assessment programs that require high throughput sampling and quantitative methods capable of producing robust results that leverages chromatographic and mass spectrometric paradigms instead of being extraction technology focused.

Including the bioconcentration of pesticide metabolites in plant uptake modeling

Although several models of pesticide uptake into plants are available, there are few modeling studies on the bioconcentration of metabolites in plants. Ignoring metabolites in plant uptake models can result in an underestimation of the parent compound's overall impacts on human health associated with pesticide residues in harvested food crops. To address this limitation, we offer a metabolite-based plant uptake model to predict the bioconcentration of the parent compound and its metabolites in plants. We used the uptake of glyphosate and its major metabolite (aminomethylphosphonic acid, AMPA) into potato as an example. The analysis of variability revealed that soil properties (affecting the soil sorption coefficient), dissipation half-life in soil, and metabolic half-life in the potato had a significant impact on the simulated AMPA concentration in the potato, indicating that regional variability could be generated in the plant bioconcentration process of metabolites. The proposed model was further compared using the non-metabolite model. The findings of the comparison suggested that the non-metabolite model, which is integrated with the AMPA bioconcentration process, can predict the AMPA concentration in the potato similarly to the proposed model. In conclusion, we provide insight into the bioconcentration process of metabolites in tuber plants from a modeling viewpoint, with some crucial model inputs, such as biotransformation and metabolic rate constants, requiring confirmation in future studies. The modeling demonstration emphasizes that it is relevant to consider bioaccumulation of metabolites, which can propagate further into increased overall residues of harmful compounds, especially in cases where metabolites have higher toxicity effect potency than their respective parent compounds.

Electroactive molecularly imprinted polymer nanoparticles for selective glyphosate determination

Redox-active molecularly imprinted polymer nanoparticles selective for glyphosate, MIP-Gly NPs, were devised, synthesized, and subsequently integrated onto platinum screen-printed electrodes (Pt-SPEs) to fabricate a chemosensor for selective determination of glyphosate (Gly) without the need for redox probe in the test solution. That was because, ferrocenylmethyl methacrylate was added to the polymerization mixtures during the NPs synthesis so that the resulting MIP-Gly NPs contained covalently immobilized ferrocenyl moieties as the reporting redox ingredient, conferring these NPs with electroactive properties. MIP-Gly NPs of four different compositions were evaluated. The herein described approach represents a simple and effective way to endow MIP NPs with electrochemical reporting capabilities with neither the need to functionalize them post-synthesis nor to use electrochemical mediators present in the tested solution during the analyte determinations. MIP-Gly NPs synthesized using allylamine and squaramide-based monomers appeared most selective to Gly. The Pt-SPEs modified with MIP-Gly NPs were characterized with differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Changes in the DPV peak originating from the oxidation of the ferrocenyl moieties in these MIP-Gly NPs served as the analytical signal. The DPV limit of detection and the linear dynamic concentration range for Gly were 3.7 pM and 25 pM-500 pM, respectively. Moreover, the selectivity of the fabricated chemosensors was sufficiently high to determine Gly successfully in spiked river water samples.

Challenges in direct determination of Glyphosate and aminomethylphosphonic acid in water by LC-MS/MS at modified reverse phase columns: Effect of matrix interferences in fresh and hard water systems

This study validated two underivatized methods (M1 & M2) according to the Eurachem guidelines to analyze the herbicide Glyphosate and its major metabolite aminomethylphosphonic acid simultaneously by LC-MS/MS in both fresh and hard waters. Samples were analyzed directly after filtration through 0.22 μm syringe filters in M1, while samples were acidified with acetic acid before filtration in M2. Spike recoveries were greater than 80% for Glyphosate and aminomethylphosphonic acid in both methods. The LOQ was 0.5 μg L^-1 for M1, and 0.1 μg L^-1 for M2 by using matrix-matched calibrations. The linear regression coefficient of both methods was greater than 0.995. The expanded uncertainty was found to be less than 25% for both. Moreover, M1 has an additional mass spectral confirmation ability, and the column and the mobile phase used in M2 can be used to analyze the inert surfactant used in Glyphosate formulations, Polyethoxylated tallow amine. The accuracy of the developed methods was assured by participating in a proficiency testing program against M2, and conducting the t-test for results generated by both M1 and M2. Both methods, therefore, can be used to determine Glyphosate and aminomethylphosphonic acid content concurrently in fresh and hard waters. This article is protected by copyright. All rights reserved.

Phosphate addition enhances alkaline extraction of glyphosate from highly sorptive soils and aquatic sediments

BACKGROUND

Analytical constraints complicate environmental monitoring campaigns of the herbicide glyphosate and its major degradation product aminomethylphosphonic acid (AMPA): their strong sorption to soil minerals requires harsh extraction conditions. Coextracted matrix compounds impair downstream analysis and must be removed before analysis.

RESULTS

A new extraction method combined with subsequent capillary electrophoresis-mass spectrometry for derivatization-free analysis of glyphosate and AMPA in soil and sediment was developed and applied to a suite of environmental samples. It was compared to three extraction methods from literature. We show that no extraction medium reaches 100% recovery. The new phosphate-supported alkaline extraction method revealed (1) high recoveries of 70-90% for soils and aquatic sediments, (2) limits of detections below 20 μg kg-1 , and (3) a high robustness, because impairing matrix components (trivalent cations and humic acids) were precipitated prior to the analysis. Soil and sediment samples collected around Tübingen, Germany, revealed maximum glyphosate and AMPA residues of 80 and 2100 μg kg-1 , respectively, with residues observed along a core of lake sediments. Glyphosate and/or AMPA were found in 40% of arable soils and 57% of aquatic sediment samples.

CONCLUSION

In this work, we discuss soil parameters that influence (de)sorption and thus extraction. From our results we conclude that residues of glyphosate in environmental samples are easily underestimated. With its possible high throughput, the method presented here can resolve current limitations in monitoring campaigns of glyphosate by addressing soil and aquatic sediment samples with critical sorption characteristics.

Effects of Phosphonate Herbicides on the Secretions of Plant-Beneficial Compounds by Two Plant Growth-Promoting Soil Bacteria: A Metabolomics Investigation

Plant growth-promoting rhizobacteria (PGPR) that colonize plant roots produce a variety of plant-beneficial compounds, including plant-growth regulators, metal-scavenging compounds, and antibiotics against plant pathogens. Adverse effects of phosphonate herbicides, the most extensively used herbicides, on the growth and metabolism of PGPR species have been widely reported. However, the potential consequence of these effects on the biosynthesis and secretion of PGPR-derived beneficial compounds still remains to be investigated. Here, using high-resolution mass spectrometry and a metabolomics approach, we investigated both the intracellular metabolome and the extracellular secretions of biomass-normalized metabolite levels in two PGPR species (Pseudomonas protegens Pf-5, a Gram-negative bacterium; Priestia megaterium QM B1551, a Gram-positive bacterium) exposed to three common phosphonate herbicides (glyphosate, glufosinate, and fosamine; 0.1-1 mM) in either iron (Fe)-replete or Fe-deficient nutrient media. We quantified secreted auxin-type plant hormone compounds (phenylacetic acid and indole-3-acetic acid), iron-scavenging compounds or siderophores (pyoverdine and schizokinen), and antibiotics (2,4-diacetylphloroglucinol and pyoluteorin) produced by these PGPR species. The Fe-replete cells exposed to the phosphonate herbicides yielded up to a 25-fold increase in the production of both auxin and antibiotic compounds, indicating that herbicide exposure under Fe-replete conditions triggered metabolite secretions. However, the herbicide-exposed Fe-deficient cells exhibited a near 2-fold depletion in the secretion of these auxin and antibiotic compounds as well as a 77% decrease in siderophore production. Intracellular metabolomics analysis of the Fe-deficient cells further revealed metabolic perturbations in biosynthetic pathways consistent with the impaired production of the plant-beneficial compounds. Our findings implied that compromised cellular metabolism during nutrient deficiency may exacerbate the adverse effects of phosphonate herbicides on PGPR species.

Residues of glyphosate in food and dietary exposure

Glyphosate is the active ingredient in Roundup® brand nonselective herbicides, and residue testing for food has been conducted as part of the normal regulatory processes. Additional testing has been conducted by university researchers and nongovernmental agencies. Presence of residues needs to be put into the context of safety standards. Furthermore, to appropriately interpret residue data, analytical assays must be validated for each food sample matrix. Regulatory agency surveys indicate that 99% of glyphosate residues in food are below the European maximum residue limits (MRLs) or U.S. Environmental Protection Agency tolerances. These data support the conclusion that overall residues are not elevated above MRLs/tolerances due to agricultural practices or usage on genetically modified (GM) crops. However, it is important to understand that MRLs and tolerances are limits for legal pesticide usage. MRLs only provide health information when the sum of MRLs of all foods is compared to limits established by toxicology studies, such as the acceptable daily intake (ADI). Conclusions from dietary modeling that use actual food residues, or MRLs themselves, combined with consumption data indicate that dietary exposures to glyphosate are within established safe limits. Measurements of glyphosate in urine can also be used to estimate ingested glyphosate exposure, and studies indicate that exposure is <3% of the current European ADI for glyphosate, which is 0.5 mg glyphosate/kg body weight. Conclusions of risk assessments, based on dietary modeling or urine data, are that exposures to glyphosate from food are well below the amount that can be ingested daily over a lifetime with a reasonable certainty of no harm.

Unveiling spatial variability in herbicide soil sorption using Bayesian digital mapping

Regional mapping herbicide sorption to soil is essential for risk assessment. However, conducting analytical quantification of adsorption coefficient (K_d ) in large-scale studies is too costly; therefore, a research question arises on goodness of K_d spatial prediction from sampling. The application of a spatial Bayesian regression (BR) is a newer technique in agricultural and natural resources sciences that allows converting spatially discrete samples into maps covering continuous spatial domains. The objective of this work was to unveil herbicide sorption to soil at a landscape scale by developing a predictive BR model. We integrated a large set of ancillary soil and climate covariables from sites with K_d measurements into a spatial mixed model including site random effects. The models were fitted using glyphosate and atrazine K_d s, determined in 80 and 120 sites, respectively, from central Argentina. For model assessment, measurements of global and point-wise prediction errors were obtained by cross-validation; residual variability was estimated by bootstrap to compare BR with regression kriging. Results showed that the BR spatial predictions outperformed regression kriging. The glyphosate K_d model (root mean square prediction error, 13% of the mean) included aluminum oxides, pH, and clay content, whereas the atrazine K_d model strongly depended on soil organic carbon and clay and on climatic variables related to water availability (root mean square prediction error, 27%). Spatial modeling of a complex edaphic process as herbicide sorption to soils enhanced environmental interpretations. An efficient approach for spatial mapping provides a modern perspective on the study of herbicide sorption to soil.

Ecotoxicology of Glyphosate, Its Formulants, and Environmental Degradation Products

The chemical and biological properties of glyphosate are key to understanding its fate in the environment and potential risks to non-target organisms. Glyphosate is polar and water soluble and therefore does not bioaccumulate, biomagnify, or accumulate to high levels in the environment. It sorbs strongly to particles in soil and sediments and this reduces bioavailability so that exposures to non-target organisms in the environment are acute and decrease with half-lives in the order of hours to a few days. The target site for glyphosate is not known to be expressed in animals, which reduces the probability of toxicity and small risks. Technical glyphosate (acid or salts) is of low to moderate toxicity; however, when mixed with some formulants such as polyoxyethylene amines (POEAs), toxicity to aquatic animals increases about 15-fold on average. However, glyphosate and the formulants have different fates in the environment and they do not necessarily co-occur. Therefore, toxicity tests on formulated products in scenarios where they would not be used are unrealistic and of limited use for assessment of risk. Concentrations of glyphosate in surface water are generally low with minimal risk to aquatic organisms, including plants. Toxicity and risks to non-target terrestrial organisms other than plants treated directly are low and risks to terrestrial invertebrates and microbial processes in soil are very small. Formulations containing POEAs are not labeled for use over water but, because POEA rapidly partitions into sediment, risks to aquatic organisms from accidental over-sprays are reduced in shallow water bodies. We conclude that use of formulations of glyphosate under good agricultural practices presents a de minimis risk of direct and indirect adverse effects in non-target organisms.

Analysis of Glyphosate Residues in Foods from the Canadian Retail Markets between 2015 and 2017

Underlying the risk management of pesticides to protect human health and to facilitate trade among nations are sound scientific data on the levels of compliance with standards set by governments and internationally from monitoring of the levels of pesticides in foods. Although glyphosate is among the universally used pesticides in the world, monitoring has been hampered by the analytical difficulties in dealing with this highly polar compound. Starting in 2015, using liquid chromatography/tandem mass spectrometry (LC-MS/MS) that permits accurate and reproducible determination of glyphosate, the prevalence, concentrations, and compliance rates were determined. In this work, the glyphosate residues contents of 7955 samples of fresh fruits and vegetables, milled grain products, pulse products, and finished foods collected from April 2015 to March 2017 in the Canadian retail market are reported. A total of 3366 samples (42.3%) contained detectable glyphosate residues. The compliance rate with Canadian regulations was 99.4%. There were 46 noncompliant samples. Health Canada determined that there was no long-term health risk to Canadian consumers from exposure to the levels of glyphosate found in the samples of a variety of foods surveyed. The high level of compliance (99.4% of samples with the Canadian regulatory limits) and the lack of a health risk for noncompliant samples indicate that, with respect to glyphosates, the food available for sale in Canada is safe.

Simultaneous and direct determination of glyphosate and AMPA in water samples from the hydroponic cultivation of eucalyptus seedlings using HPLC-ICP-MS/MS

Glyphosate is the main herbicide currently used in the world due to wide applicability and efficiency in controlling weeds in many crops. However, its overuse may lead to undesirable impacts on the environment and to human health in the long run. This present study aimed to optimize and validate solid phase extraction (SPE) using an anionic resin for the simultaneous and direct determination of glyphosate and aminomethylphosphonic acid (AMPA) in water samples using high-performance liquid chromatography combined with inductively coupled plasma with triple quadrupole mass spectrometer (HPLC-ICP-MS/MS). The results showed that recovery percentage and relative standard deviation were 103.9 ± 7.9 and 99.40 ± 9.9% for glyphosate and AMPA, respectively. The validation certified that the method was precise, accurate, linear, and selective, with a limit of quantification of 1.09 and 0.29 μg L-1 for glyphosate and AMPA, respectively. The optimized methodology reached the concentration factor of 250 times and was successfully applied to analyze water samples from hydroponic cultivation of the eucalyptus seedlings. The results showed that the exudation process occurs at glyphosate doses starting from 2 L ha-1.

Robust and highly sensitive micro liquid chromatography-tandem mass spectrometry method for analyses of polar pesticides (glyphosate, aminomethylphosfonic acid, N-acetyl glyphosate and N-acetyl aminomethylphosfonic acid) in multiple biological matrices

Glyphosate is the most used herbicide in agriculture. To monitor glyphosate exposure, analytical methods have to fulfill requirements with regard to sensitivity, reproducibility, ease of handling/high-throughput and applicability to multiple biological matrices. Furthermore, the methods have to include the degradation product of glyphosate, aminomethylphosfonic acid (AMPA) and preferably metabolites of glyphosate and AMPA, N-acetyl AMPA and N-acetyl glyphosate. Majority of the published methods for glyphosate and AMPA require derivatization to be able to achieve high sensitivity. In this work, we present highly sensitive microLC-MS/MS method for simultaneous quantification of glyphosate, AMPA, N-acetyl AMPA and N-acetyl glyphosate in multiple biological matrices without derivatization. The combination of simple sample clean-up procedures for simultaneous handling of 96 sample and short chromatographic run of only 3.4 min, meets the requirements for high-throughput methods. Simple mobile phase of water containing formic and medronic acids and isocratic run provided robust chromatographic separation on hypercarb column. The use of micro-flow system decreased the background noise, increasing the sensitivity. Achieved Low Limits of Quantification (LOQs) for liquid samples (plasma/serum/urine) were 0.00005 mg L-1 and 0.0001 mg kg-1 for solid samples (grain and soybean based feed/stomach/gizzard/intestinal content), which is more than 100 time more sensitive compared to QuPPe-Method. The method was validated in representative matrices with minimum of five fortification levels, six measurements per spiked concentration and three batches. All the samples were spiked with corresponding internal standards for all four analytes before sample clean-up procedures, ensuring high accuracy and precision. Recoveries for plasma/serum ranged between 86-108%, urine 93-120%, feed 91-115% and stomach/gizzard/intestinal content 92-110% with precision below 20%. The method's applicability was tested on 2000 samples measured during one year period.

A novel fluorimetric method for glyphosate and AMPA determination with NBD-Cl and MCR-ALS

We report the development of a new analytical method for the quantification of N-(phosphonomethyl)glycine (glyphosate) and (aminomethyl)phosphonic acid (AMPA) by combining spectrofluorimetry and multivariate calibration. In this study, fluorescence spectroscopy was used to quantify glyphosate and AMPA, which were previously derivatized with the fluorogenic reagent: 4-chloro-7-nitrobenzofurazan (NBD-Cl). Fluorescence excitation-emission matrices (EEM) were recorded by exciting between 400 and 500 nm, and measuring the emission between 500 and 610 nm. The second-order data obtained were processed using the Multivariate Curve Resolution with Alternating Least Square (MCR-ALS) methodology. The developed method was used to predict different concentrations of glyphosate and AMPA in validation samples. In addition, the presence of the herbicide was evaluated in real samples: a commercial formulation and a water sample from a cultivated area. For this purpose, the standard addition method was used to study the matrix effect in each case. The ranges of working concentrations obtained for this new method are in agreement with the amounts found in surface water samples near a direct sowing soybean growing region in Argentina.

Effect of glyphosate on X-ray diffraction of copper films prepared by electrochemical deposition

In the process of electrochemical deposition of metals, the additives can directly affect the final morphology of the metal. Using glyphosate as the additive, copper thin films were prepared by the electrochemical deposition method from a CuSO₄ aqueous solution under a specific voltage. The copper thin films were grown on the surface of the indium tin oxide (ITO) film, which was used as the working electrode in a classical three-electrode cell. Glyphosate combined with the copper ion to form a complex, and hindered further reduction and crystallization of the copper ions. The results indicated that the peak intensities of the X-ray diffraction peaks decreased with the increase in the glyphosate concentrations, which can be used as a basis for quantitative detection. The method is simple and highly sensitive.

Quantitative probing of glyphosate by combining electrochemical deposition and X-ray diffraction methods.

Determination of glyphosate, AMPA and glufosinate in dairy farm water from Argentina using a simplified UHPLC-MS/MS method

Argentina, together with the USA and Brazil, produces approximately 80% of the total worldwide glyphosate loadings. The development of a simplified ultra-high performance liquid chromatographic tandem mass spectrometric method (UHPLC-MS/MS) for the determination of glyphosate, aminomethylphosphonic acid (AMPA) and glufosinate in water is described, including studies of several alternatives of 9-fluorenylmethylchloroformate (FMOC-Cl) derivatization and pretreatment steps. The proposed method includes acidification and neutralization of a low sample volume (3 mL), 2 hours derivatization step, cleanup with dichloromethane, followed by reverse phase UHPLC-MS/MS determination of the analytes. Figures of merit were satisfactory in terms of linearity, selectivity, accuracy and intermediate precision (%REC 70-105% with RSD < 15%). Limits of quantification (LOQ) were suitable for monitoring purposes (0.6, 0.2, 0.1 μg/L for glyphosate, AMPA and glufosinate respectively). The validated methodology was applied for the analysis of livestock wells waters from 40 dairy farms located in the central region of Argentina. Glyphosate and AMPA were quantified in 15% and 53% of the analyzed samples with concentrations ranging from 0.6-11.3 μg/L and 0.2-6.5 μg/L respectively. Greater concentrations of glyphosate were also verified in waters from open-reservoir tanks, which are directly exposed to the farm environment. In these cases glyphosate and AMPA occurrence increased, being quantified in the 33% and 61% of the samples with values ranging 0.6-21.2 μg/L and 0.2-4.2 μg/L respectively. Also in this case glufosinate was found in 52% samples at Collapse

Key Words

• AMPA
• Dairy farm environment
• FMOC-UHPLC-MS/MS
• Glufosinate
• Glyphosate
• Water

Collapse

MESH Headings

• Aminobutyrates/analysis
• Argentina
• Brazil
• Chromatography, High Pressure Liquid
• Dairying/statistics & numerical data
• Environmental Monitoring
• Farms
• Glycine/analogs & derivatives
• Glycine/analysis
• Herbicides/analysis
• Isoxazoles/analysis
• Tandem Mass Spectrometry
• Tetrazoles/analysis
• Water Pollutants, Chemical/analysis
• Glyphosate

Collapse

Grants Collapse

Affiliation(s)

Luisina Delma Demonte Programa de Investigación y Análisis de Residuos y Contaminantes Químicos (PRINARC), Facultad de Ingeniería Química, Universidad Nacional del Litoral, Santiago del Estero 2654, 3000 Santa Fe, Argentina; Consejo Nacional de Investigaciones Científicas Técnicas (CONICET), C1033AAJ Buenos Aires, Argentina
Nicolás Michlig Programa de Investigación y Análisis de Residuos y Contaminantes Químicos (PRINARC), Facultad de Ingeniería Química, Universidad Nacional del Litoral, Santiago del Estero 2654, 3000 Santa Fe, Argentina
Monica Gaggiotti Instituto Nacional de Tecnología Agropecuaria, EEA Rafaela, Ruta 34 km 227, 2300 Rafaela, Santa Fe, Argentina
Claudia Guadalupe Adam Consejo Nacional de Investigaciones Científicas Técnicas (CONICET), C1033AAJ Buenos Aires, Argentina; IQAL (UNL-CONICET), Facultad de Ingeniería Química, Universidad Nacional del Litoral, Santiago del Estero 2829, 3000 Santa Fe, Argentina
Horacio Ramón Beldoménico Programa de Investigación y Análisis de Residuos y Contaminantes Químicos (PRINARC), Facultad de Ingeniería Química, Universidad Nacional del Litoral, Santiago del Estero 2654, 3000 Santa Fe, Argentina
Maria Rosa Repetti Programa de Investigación y Análisis de Residuos y Contaminantes Químicos (PRINARC), Facultad de Ingeniería Química, Universidad Nacional del Litoral, Santiago del Estero 2654, 3000 Santa Fe, Argentina.

Collapse

Validation and application of analytical method for glyphosate and glufosinate in foods by liquid chromatography-tandem mass spectrometry

A reliable and sensitive method was developed for simultaneous determination of glyphosate and glufosinate in various food products by liquid chromatography-tandem mass spectrometry. Based on extraction, derivatization with 9-fluorenylmethylchloroformate and purification on solid phase extraction column, quantification was done by using isotopic-labeled analytes as internal standard and calibration in matrix. Good selectivity and sensitivity were achieved with a limit of quantification of 5 μg/kg. The recoveries of these two pesticides ranged from 91% to 114% with inter-day and relative standard deviation of 3.8-6.1% in five matrices of cereal group spiked at 5, 10, and 20 μg/kg. An accuracy profile was performed for method validation, demonstrating the accuracy and precision of the method for the studied food groups. The verification results in expanded food groups indicated extensive applicability for the analysis of glyphosate and glufosinate. Finally, the developed method was applied to analyze 136 food samples including milk-based baby foods from the French Agency for Food, Environmental and Occupational Health & Safety. Glyphosate residues were detected in two breakfast cereal samples (6.0 and 34 μg/kg). Glufosinate residues were found in a sample of boiled potatoes (9.8 μg/kg). No residues were detected in the other samples, including milk-based baby foods with limits of detection ranging from 1 to 2 μg/kg. The method has been applied for routine national monitoring of glyphosate and glufosinate in various foods.

Analysis of glyphosate and aminomethylphosphonic acid in water, plant materials and soil

There is a need for simple, fast, efficient and sensitive methods of analysis for glyphosate and its degradate aminomethylphosphonic acid (AMPA) in diverse matrices such as water, plant materials and soil to facilitate environmental research needed to address the continuing concerns related to increasing glyphosate use. A variety of water-based solutions have been used to extract the chemicals from different matrices. Many methods require extensive sample preparation, including derivatization and clean-up, prior to analysis by a variety of detection techniques. This review summarizes methods used during the past 15 years for analysis of glyphosate and AMPA in water, plant materials and soil. The simplest methods use aqueous extraction of glyphosate and AMPA from plant materials and soil, no derivatization, solid-phase extraction (SPE) columns for clean-up, guard columns for separation and confirmation of the analytes by mass spectrometry and quantitation using isotope-labeled internal standards. They have levels of detection (LODs) below the regulatory limits in North America. These methods are discussed in more detail in the review.

Analysis of glyphosate and aminomethylphosphonic acid in leaves from Coffea arabica using high performance liquid chromatography with quadrupole mass spectrometry detection

Glyphosate is a commonly applied herbicide in coffee plantations. Because of its non-selective mode of action it can damage the crop exposed through spray drift. Therefore, it is of interest to study glyphosate fate in coffee plants. The aim of this study was to develop an analytical method for accurate and precise quantification of glyphosate and its main metabolite aminomethylphosphonic acid (AMPA) at trace levels in coffee leaves using liquid chromatography with single-quadrupole mass spectrometry detection. The method is based on a two-step solid phase extraction (SPE) with an intermediate derivatization reaction using 9-fluorenylmethylchloroformate (FMOC). An isotope dilution method was used to account for matrix effects and to enhance the confidence in analyte identification. The limit of quantification (LOQ) for glyphosate and AMPA in coffee leaves was 41 and 111 μg kg(-1) dry weight, respectively. For the method optimization a design of experiments (DOE) approach was used. The sample clean-up procedure can be simplified for the analysis of less challenging matrices, for laboratories having a tandem mass spectrometry detector and for cases in which quantification limits above 0.1 mg kg(-1) are acceptable, which is often the case for glyphosate. The method is robust, possesses high identification confidence, while being suitable for most commercial and academic laboratories. All leaf samples from five coffee fields analyzed (n=21) contained glyphosate, while AMPA was absent. The simplified clean-up procedure was successfully validated for coffee leaves, rice, black beans and river water.

Analysis of endocrine disruption effect of Roundup® in adrenal gland of male rats

The effect of Roundup^® on adrenal gland steroidogenesis and signaling pathway associated with steroid production was investigated. Doses of 10, 50, 100 and 250 mg/kg bw/d Roundup^® were administered for two weeks to adult male rats. The 10 mg/kg bw/d dose which reduced circulatory corticosterone levels, but did not change food consumption and body weight, was selected for further study. The expression of cholesterol receptor (low density lipoprotein receptor), de novo cholesterol synthesis enzyme (3-hydroxy-3-methylglutaryl-coenzyme A synthase), hormone-sensitive lipase, steroidogenic acute regulatory protein (StAR) mRNA and phosphorylated form was decreased. Adrenocorticotropic hormone receptor (ACTH), melanocortin-2 receptor, expression was not changed but circulatory ACTH levels and adrenal cortex protein kinase A (PKA) activity were reduced. Surprisingly, exogenous ACTH treatment rescued steroidogenesis in Roundup^®-treated animals. Apoptosis was evident at 250 mg/kg bw/d, but not at 10 mg/kg bw/d dose. These results suggest that Roundup^® may be inhibitory to hypothalamic–pituitary axis leading to reduction in cyclic adenosine monophosphate (cAMP)/PKA pathway, StAR phosphorylation and corticosterone synthesis in the adrenal tissue.