The photocatalytic antibacterial molecular mechanisms towards Pseudomonas syringae pv. tabaci by g-C3 N4 nanosheets: insights from the cytomembrane, biofilm and motility disruption

g-C3N4@CuO electrostatic self-assembly toward Ralstonia solanacearum: Insights from cytomembrane and motility disruption

BACKGROUND

Ralstonia solanacearum, a notorious and refractory bacterial plant pathogen, threatens multiple vegetable crops and causes significant economic loss in agriculture. Long-term use of traditional medicines not only increases the problem of drug resistance, but also causes great environmental pollution. Therefore, there is an urgent need to develop new agents with high efficacy and low toxicity.

RESULTS

In this study, we have synthesized and characterized graphitic carbon nitride incorporated copper oxide composite (g-C3N4@CuO), which showed higher antimicrobial effect than graphitic carbon nitride nanosheets (g-C3N4 nanosheets) and copper oxide nanoparticles (CuONPs). Ralstonia solanacearum exposed to g-C3N4@CuO exhibited higher levels of oxygen toxicity, cell membrane damage, DNA damage, motility disruption and even cell death compared to g-C3N4 nanosheets and CuONPs. In addition, g-C3N4@CuO was more effective in the control of tobacco bacterial wilt than g-C3N4 nanosheets and CuONPs.

CONCLUSION

Thus, this study provides a new perspective on g-C3N4@CuO control of bacterial diseases in crops, and the mechanism is related to the destruction of cell membrane damage and motility disruption. © 2024 Society of Chemical Industry.

Visible-light-driven water-soluble zinc oxide quantum dots for efficient control of citrus canker

BACKGROUND

Citrus canker caused by Xanthomonas citri subsp. citri (Xcc) is a devastating bacterial disease that reduces citrus yield and quality, posing a serious threat to the citrus industry. Several conventional chemicals have been used to control citrus canker. However, this approach often leads to the excessive use of chemical agents, can exacerbate environmental pollution and promotes the development of resistant Xcc. Therefore, there is significant interest in the development of efficient and environmentally friendly technologies to control citrus canker.

RESULTS

In this study, water-soluble ZnO quantum dots (ZnO QDs) were synthesised as an efficient nanopesticide against Xcc. The results showed that the antibacterial activity of ZnO QDs irradiated with visible light [half-maximal effective concentration (EC50) = 33.18 μg mL-1] was ~3.5 times higher than that of the dark-treated group (EC50 = 114.80 μg mL-1). ZnO QDs induced the generation of reactive oxygen species (•OH, •O- 2 and 1O2) under light irradiation, resulting in DNA damage, cytoplasmic destruction, and decreased catalase and superoxide dismutase activities. Transcription analysis showed downregulation of Xcc genes related to 'biofilms, virulence, adhesion' and 'DNA transfer' exposure to ZnO QDs. More importantly, ZnO QDs also promoted the growth of citrus.

CONCLUSION

This research provides new insights into the photocatalytic antibacterial mechanisms of ZnO QDs and supports the development of more efficient and safer ZnO QDs-based nanopesticides to control citrus canker. © 2024 Society of Chemical Industry.

Composite g-C3 N4 @ZnO NP electrostatic self-assembly: enhanced ROS as a key factor for high-efficiency control of tobacco wildfire disease

BACKGROUND

The utilization of non-metallic inorganic nanomaterials for antimicrobial photocatalytic technology has emerged as a promising approach to combat drug-resistant bacteria. Recently, g-C3 N4 nanosheets have attracted significant attention due to their exceptional stability, degradability, low cost, and remarkable antibacterial properties. In this study, a facile electrostatic self-assembly approach was utilized to functionalize ZnO nanoparticles with g-C3 N4 nanosheets, resulting in the formation of g-C3 N4 @ZnO nanoparticle composites.

RESULTS

The Z-shaped heterojunction architecture of these composites facilitates efficient separation of photogenerated electron-hole pairs and enhances visible light catalytic performance. Moreover, the formation of the g-C3 N4 @ZnO heterostructure showed a higher photocatalytic capacity and the generation of reactive oxygen species (ROS) than g-C3 N4 nanosheets. The photocatalytic antibacterial mechanisms of g-C3 N4 @ZnO at the transcriptomic level primarily involve disrupting bacterial membrane synthesis and inhibiting motility and energy metabolism. Therefore, the antibacterial mechanism of g-C3 N4 @ZnO can be attributed to a combination of physical membrane damage, chemical damage (ROS enhancement) and inhibition of chemotaxis, biofilm formation and flagellar motility.

CONCLUSION

These findings collectively provide novel high potential and insights into the practical application of photocatalysts in plant disease management. © 2023 Society of Chemical Industry.

Antimicrobial mechanisms of ZnO nanoparticles to phytopathogen Pseudomonas syringae: Damage of cell envelope, suppression of metabolism, biofilm and motility, and stimulation of stomatal immunity on host plant

Nanoparticles have recently been employed as a new strategy to act as bactericides in agricultural applications. However, the effects and mechanisms of foliar deposition of nanoparticles on bacterial pathogens, plant physiology and particularly plant immunity have not been sufficiently understood. Here, we investigated the effects and mechanisms of ZnO NPs in controlling of tobacco wildfire caused by Pseudomonas syringae pv. tabaci, through the comprehensive analysis of biological changes of both bacteria and plants. The global gene expression changes of Pseudomonas syringae pv. tabaci supported that the functions of "protein secretion", "membrane part", "signal transducer activity", "locomotion", "chemotaxis" and "taxis" in bacteria, as well as the metabolic pathways of "bacterial chemotaxis", "two-component system", "biofilm formation", "ABC transporters" and "valine, leucine and isoleucine degradation" were significantly down-regulated by ZnO NPs. Correspondingly, we reconfirmed that the cell envelope structure, biofilm and motility of Pseudomonas syringae pv. tabaci were directly disrupted or suppressed by ZnO NPs. Different from completely killing Pseudomonas syringae pv. tabaci, ZnO NPs (0.5 mg/mL) potentially improved plant growth and immunity through enzymatic activity and global molecular response analysis. Furthermore, the changes of gene expression in ABA signaling pathway, ABA concentration and stomatal aperture all supported that ZnO NPs can specifically stimulate stomatal immunity, which is important to defend bacterial infection. Taken together, we proposed that both the inhibition or damage of motility, biofilm, metabolisms, virulence and cell envelope on P. syringae pv. tabaci, and the activation of the stomatal immunity formed two-layered antibacterial mechanisms of ZnO NPs on phytopathogenic bacteria.

Chitin nanocrystals supported copper: a new nanomaterial with high activity with P. syringae pv. Tabaci

BACKGROUND

The application of chemical pesticides in control of plant bacterial disease may cause potential environmental pollution. Herein, based on the resistance-inducing ability and the special rod-like structure with high aspect ratio of bio-derived chitin nanocrystals (ChNC), a new Cu composite rod-like nanoparticle was fabricated (ChNC@Cu). The antibacterial activity of the composite nanoparticle was systematically studied, and its safety was evaluated.

RESULTS

TEM, FTIR, ICP and other characterization methods proved that ChNC@Cu is a nano rod-like structure, with a Cu²⁺ loading capacity of 2.63%. In vitro experiments showed that the inhibition rate of ChNC@Cu to P. syringae pv. tabaci was more than 95% when the copper content was 41.6 μg mL^-1 . In vivo experiments showed that ChNC@Cu had a good protective effect on P. syringae pv. tabaci of tobacco. In addition, ChNC@Cu exhibited stronger antibacterial activity than Thiodiazole copper (TC) at the same copper content. The study on the antibacterial mechanism of ChNC@Cu proved that ChNC@Cu caused bacterial death by destroying the bacterial cell membrane structure and damaging the DNA bacteria. And ChNC@Cu is highly safe for plants and can promote seed germination and plant growth.

CONCLUSION

The special rod-like structure of ChNC can enrich Cu²⁺ to form ChNC@Cu. ChNC@Cu has a good protective effect on bacterial infection of tobacco, and achieves a great antibacterial activity at low Cu²⁺ concentration, which indicated that ChNC@Cu has induced resistance and antibacterial effect. As a novel green nanofungicide, ChNC@Cu has high potential application value in control of agricultural bacterial diseases. © 2023 Society of Chemical Industry.

Fabrication of polydopamine reduced CuO nanoparticle-alginate composite nanogels for management of Pseudomonas synringae pv. tabaci in tobacco

BACKGROUND

The wildfire disease on tobacco can seriously hinder plants. Meanwhile, its pathogen, Pseudomonas syringae, can also infect over 200 plants and threat agriculture production. However, the disease usually occurs after summer rains which washes away most copper (Cu)-based bactericides, allowing the disease to invade. Therefore, we fabricate a new nanogel with high disease control and anti-erosion ability and study the effects of the reductant on the performance of the copper oxide nanoparticle (CuONP) composite nanogel.

RESULTS

Polydopamine (PDA) is a polycation for both in situ reduction of CuONP in alginate nanogels and for adjusting the copper ion (Cu²⁺ ) releasing rate in this work. The composite nanogel fabricated by PDA (PDA-CuONP@ALGNP@CTAC) had a higher Cu²⁺ releasing rate, damaging the pathogen membrane more efficiently, allowing for better disease control and plant growth promotion when compared to sodium borohydride (SBH)-fabricated nanogel (SBH-CuONP@ALGNP@CTAC) or the commercial bactericide, thiodiazole copper. The PDA-CuONP@ALGNP@CTAC had a high anti-erosion ability and could remain adhered to the leaf surface even after five rain event simulations.

CONCLUSION

The addition of polycations (like PDA) into CuONP composite nanogel could increase the Cu²⁺ releasing rate, resulting in improved disease management when compared to SBH-CuONP@ALGNP@CTAC or thiodiazole copper. The PDA containing gel had an improved anti-erosion ability and water resistance. This new composite nanogel has a high potential for wildfire disease control, improving agricultural production. © 2022 Society of Chemical Industry.

Fabrication of copper nanoparticle composite nanogel for high-efficiency management of Pseudomonas syringae pv. tabaci on tobacco

BACKGROUND

Copper nanoparticles (CuNPs) can release copper ions (Cu2+ ) to control bacterial diseases on crops. However, the high concentration of the CuNPs applied in disease controlling can highly limit their application. In this work, by in situ reducing CuNPs in alginate nanogels and coated with cetyl trimethyl ammonium chloride (CTAC), a CuNP composite nanogel was fabricated as a new nanopesticide with low copper content.

RESULTS

Data showed that the CTAC coating would affect the antibacterial activity and leaf surface adhesion of the nanogel, while CuNP content could also influence the membrane damage ability of the gel. The nanogel could depress the growth of bacteria by rupturing its membrane and show a minimum inhibitory concentration (MIC) as low as 500 μg mL-1 , which only contain 58 μg mL-1 CuNP, and achieve a 64% of therapeutic efficiency (with 1000 μg mL-1 nanogel) in in vivo experiments, higher than that of commercial bactericide thiodiazole copper. Furthermore, the application of the nanogel can also perform a growth-promoting effect on the plant, which may be due to the supplement of copper element provided by CuNP.

CONCLUSION

The CuNP composite nanogel fabricated in this work performed high leaf disease controllability and safety compared to the commercial bactericide thiodiazole copper. We hope this nanogel can provide a potential high-efficiency nano-bactericide that can be used in the leaf bacterial disease control.

Nanophotocatalysts against viruses and antibiotic-resistant bacteria: recent advances

Photocatalysis has attracted great attention because of its direct utilisation of sunlight to obtain various chemical reactions, causing water splitting, organic pollutant degradation, and water disinfection. Nanophotocatalysts can be employed for various applications, including hydrogen storage, green diesel production, fuel cell applications, industrial manufacturing methods, pharmaceutical industries, and catalytic degradation of contaminants/hazardous materials. Photocatalytic inactivation and removal of pathogenic viruses, antibiotic-resistant bacteria and antibiotic resistance genes can be considered as simple and effective technique with low-cost, eco-friendliness, and low energy consumption features. The high specific surface areas, abundant functional groups, large amounts of active sites are some advantages of the nanostructures for photocatalytic activity with high efficiency. However, some important limitations/drawbacks of nanophotocatalysts for industrial and commercial applications such as the low selectivity, aggregation/sedimentation, difficult separation, low-usage of visible light, fast charge recombination, and low migration potential of photogenerated electrons/holes are need to be comprehensively and analytically investigated and addressed by researchers. This critical review highlighted the recent advancements in photocatalytic disinfection of pathogenic viruses and antibiotic-resistant bacteria, focussing on the development of highly efficient nanophotocatalysts and their underlying mechanisms of inactivation/removal of these pathogens.