High-throughput biological sample analysis using on-line turbulent flow extraction combined with monolithic column liquid chromatography/tandem mass spectrometry

An Update on Current Trend in Sample Preparation Automation in Bioanalysis: strategies, Challenges and Future Direction

Automation in sample preparation improves accuracy, productivity, and precision in bioanalysis. Moreover, it reduces resource consumption for repetitive procedures. Automated sample analysis allows uninterrupted handling of large volumes of biological samples originating from preclinical and clinical studies. Automation significantly helps in management of complex testing methods where generation of large volumes of data is required for process monitoring. Compared to traditional sample preparation processes, automated procedures reduce associated expenses and manual error, facilitate laboratory transfers, enhance data quality, and better protect the health of analysts. Automated sample preparation techniques based on robotics potentially increase the throughput of bioanalytical laboratories. Robotic liquid handler, an automated sample preparation system built on a robotic technique ensures optimal laboratory output while saving expensive solvents, manpower, and time. Nowadays, most of the traditional extraction processes are being automated using several formats of online techniques. This review covered most of the automated sample preparation techniques reported till date, which accelerated and simplified the sample preparation procedure for bioanalytical sample analysis. This article critically analyzed different developmental aspects of automated sample preparation techniques based on robotics as well as conventional sample preparation methods that are accelerated using automated technologies.

Applications of chromatographic methods in metabolomics: A review

Chromatography is a robust and reliable separation method that can use various stationary phases to separate complex mixtures commonly seen in metabolomics. This review examines the types of chromatography and stationary phases that have been used in targeted or untargeted metabolomics with methods such as mass spectrometry (MS) and nuclear magnetic resonance (NMR) spectroscopy. General considerations for sample pretreatment and separations in metabolomics are considered, along with the various supports and separation formats for chromatography that have been used in such work. The types of liquid chromatography (LC) that have been most extensively used in metabolomics will be examined, such as reversed-phase liquid chromatography and hydrophilic liquid interaction chromatography. In addition, other forms of LC that have been used in more limited applications for metabolomics (e.g., ion-exchange, size-exclusion, and affinity methods) will be discussed to illustrate how these techniques may be utilized for new and future research in this field. Multidimensional LC methods are also discussed, as well as the use of gas chromatography and supercritical fluid chromatography in metabolomics. In addition, the roles of chromatography in NMR- vs. MS-based metabolomics are considered. Applications are given within the field of metabolomics for each type of chromatography, along with potential advantages or limitations of these separation methods.

Ultrafast liquid chromatography-tandem mass spectrometry determination of donepezil in human plasma: application to a bioequivalence study

A liquid chromatography equipped with tandem mass spectrometric method using multi-stage flow rates was developed for the determination of donepezil in human plasma to support a randomized, crossover bioequivalence (BE) study in which healthy volunteers each received a single oral dose of the reference and test formulations of 10 mg donepezil hydrochloride. This integrated liquid chromatography with tandem mass spectrometry (LC-MS/MS) system with electrospray ionization and a deuterium-labeled internal standard (IS) were employed for the positive multiple-reaction-monitoring (MRM) analyses. The baseline separation using a high-resolution monolithic column under gradient and flexible flowrate conditions between donepezil and multiple interfering peaks from the extracted quality control, calibration standard and study plasma samples following simple protein precipitation extraction procedures was accomplished within 1.5 minutes. The ultrafast monolithic column performance in terms of chromatographic separation efficiency, peak asymmetry and resolution and retention time reproducibility was found to be sustainable. The linear dynamic range was detected over a concentration range of 0.2–50 ng/mL. The intra- and inter-day assay accuracy and precision were within 15% for the analyte in individual biological fluids. A positive correlation coefficient (r) greater than 0.995 for donepezil concentrations in study plasma samplers measured by the proposed and the other validated LC-MS/MS methods in support of a bioequivalence study was observed.

Establishing a mass spectrometry-based system for rapid detection of SARS-CoV-2 in large clinical sample cohorts

The outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is pressing public health systems around the world, and large population testing is a key step to control this pandemic disease. Here, we develop a high-throughput targeted proteomics assay to detect SARS-CoV-2 nucleoprotein peptides directly from nasopharyngeal and oropharyngeal swabs. A modified magnetic particle-based proteomics approach implemented on a robotic liquid handler enables fully automated preparation of 96 samples within 4 hours. A TFC-MS system allows multiplexed analysis of 4 samples within 10 min, enabling the processing of more than 500 samples per day. We validate this method qualitatively (Tier 3) and quantitatively (Tier 1) using 985 specimens previously analyzed by real-time RT-PCR, and detect up to 84% of the positive cases with up to 97% specificity. The presented strategy has high sample stability and should be considered as an option for SARS-CoV-2 testing in large populations.

Novel strategies for sample preparation in forensic toxicology

This paper provides a review of novel strategies for sample preparation in forensic toxicology. The review initially outlines the principle of each technique, followed by sections addressing each class of abused drugs separately. The novel strategies currently reviewed focus on the preparation of various biological samples for the subsequent determination of opiates, benzodiazepines, amphetamines, cocaine, hallucinogens, tricyclic antidepressants, antipsychotics and cannabinoids. According to our experience, these analytes are the most frequently responsible for intoxications in Greece. The applications of techniques such as disposable pipette extraction, microextraction by packed sorbent, matrix solid-phase dispersion, solid-phase microextraction, polymer monolith microextraction, stir bar sorptive extraction and others, which are rapidly gaining acceptance in the field of toxicology, are currently reviewed.

Turbulent flow bioanalysis in drug metabolism and pharmacokinetics

Turbulent flow chromatography (TFC) as an analytical technique was introduced in the mid-1990s for online sample processing in bioanalysis. Turbulent flow columns are packed with large particles permitting the use of high mobile phase linear velocities. Solute molecules travel in a uniform concentrated band in which large matrix biomolecules are effectively separated from lower molecular weight analytes by differential mass transfer effects. In addition, the use of various bonded stationary phases enhances selectivity in TFC separations. Originally, the turbulent flow column was used for both online sample processing and the analytical separation. This mode of operation has largely been replaced with a dual column arrangement, in which sample processing is done online with the turbulent flow column and a second analytical column is employed for separation. Within the pharmaceutical industry, certain laboratories now use TFC routinely for bioanalytical support of in vivo drug discovery pharmacokinetic studies. Validated TFC methods are also used to support GLP-compliant preclinical toxicokinetic studies and clinical trials. TFC has been shown to simplify bioanalytical sample preparation and reduce sample processing costs when compared with offline techniques such as SPE. TFC may be combined with multiplexing up to four HPLC systems to a single mass spectrometer to increase analytical throughput.

Development of an ultra fast online-solid phase extraction (SPE) liquid chromatography electrospray tandem mass spectrometry (LC-ESI-MS/MS) based approach for the determination of drugs in pharmacokinetic studies

High-throughput analyses of a large number of samples for pharmacokinetic (PK) studies are essential in drug development. Analysis of drug candidates from blood using LC-ESI-MS generally requires separation of the plasma fraction followed by various offline sample preparation procedures. This step is a bottleneck that impedes throughput. In order to overcome this difficulty and accelerate analysis in PK and other studies, we developed an approach allowing the direct analysis of low volumes of whole blood (10 μL) after dilution and centrifugation. Samples were injected in an online-SPE-LC-ESI-MS/MS setup allowing a total run time of only 126 s for a full gradient separation. Analytes were extracted from the matrix within 30 s by turbulent flow chromatography. Subsequently, a full gradient separation was carried out within 1.5 minutes on a 50 × 2.1 mm (1.7 μm) RP-18 column and the analytes were sensitively detected by ESI-MS/MS in SRM mode. The performance of this new ultra fast online SPE-LC-ESI-MS/MS approach was demonstrated by the analysis of diclofenac (DCF), a widely used anti-inflammatory drug. DCF eluted at stable retention times (±0.33%) with narrow peak width (FWHM 3.3 ± 0.15 s). The method displays excellent analytical performance, with a limit of detection of 6 fmol on column, a linear range of over four orders of magnitude and a negligible carry over of 0.12 ± 0.03% for DCF. The PK profile of DCF administered by topical and intraperitoneal routes in rats and by oral route in one human volunteer is investigated using this method. Finally, general applicability of the approach for drugs is demonstrated by analysis of rofecoxib and several inhibitors of the soluble epoxide hydrolase. This new method requires only readily available, off the shelf standard LC instrumentation, and is compliant with the requirements of green analytical chemistry.

Simultaneous bioanalysis of a phosphate prodrug and its parent compound using a multiplexed LC–MS method

Background: Bioanalytical support of drug-discovery efforts increasingly requires more complex multiple component analysis, including the bioanalysis of drugs, prodrugs and metabolites. Just as the physiochemical properties of these components may differ widely from each other, optimal LC and MS conditions, including polarity, can also vary greatly among the analytes of interest, thus presenting significant challenges during quantitative LC–MS-based bioanalysis. A single compromised method for the determination of all analytes may sacrifice sensitivity or chromatographic conditions for one analyte in order to achieve adequate results for another. Manually switching between assay conditions to analyze samples under separately optimized conditions for individual compounds can be time consuming. Results: The method presented here addresses the problem of differential analyte optimization using a multiplexed approach for simultaneous quantitative bioanalysis of multiple analytes in the same sample, employing a mixed mode of both turbulent- and laminar-flow chromatography. Conclusion: The approach is illustrated with the quantitation of a lipophilic drug and its hydrophilic phosphate ester prodrug in a biological matrix under individually optimized LC–MS conditions.

Matrix effect elimination during LC–MS/MS bioanalytical method development

Due to the presence of endogenous components in biofluids, ionization suppression or enhancement may occur for bioanalytical assays using LC–MS or LC–MS/MS technologies. The matrix effect may affect the precision and accuracy of a bioanalytical method and, therefore, compromise the quality of the results. Protein precipitation sample preparation along with LC–MS/MS is a high-throughput method most commonly used in bioanalysis and is largely affected by the matrix effect. In order to eliminate the matrix effect during the method development, some considerations may be used: cleaner sample preparations, more sensitive instruments, which allow less material to be injected, different chromatographic separations and much more must be investigated. More than giving tools to adequately assess the matrix effect during the method development, this review gives scientists numerous ways to eliminate or reduce the matrix effect based on novel sample-preparation techniques, new chromatographic optimization methods and new technologies.

Fast and sensitive liquid chromatography/electrospray mass spectrometry method to study ocular penetration of EDL-155, a novel antitumor agent for retinoblastoma in rats

Our group has used the tetrahydroisoquinoline derivative EDL-155 to treat glioblastoma in animal models and it is currently being evaluated in the treatment of ocular cancers. The purpose of this study was to develop a rapid and sensitive liquid chromatography and tandem mass spectrometry (LC-MS/MS) method to study the plasma and vitreous humor disposition of EDL-155 in rats. Animals received a single periocular injection of EDL-155 (20 mg/kg). Animals were sacrificed at specified times (5, 60, 120, 240 and 360 min) and plasma and vitreous humor samples were obtained. EDL-155 was isolated by protein precipitation and the extracts were analyzed by reversed-phase high-pressure liquid chromatography (HPLC) with MS/MS detection. A structurally similar analog was used as internal standard (IS). The chromatographic run time was 3.5 min per injection. The mass spectrometer was operated in positive-ion, multiple reaction monitoring (MRM) mode. The mass transitions monitored were m/z332.2 --> 167.2 (EDL-155) and m/z391.2 --> 200.2 (IS). The lower limit of quantification (LLOQ) was 0.1 ng/ml in both vitreous humor and plasma. The method was validated for selectivity, linearity, accuracy and precision in rat vitreous humor and partially validated for accuracy and precision in rat plasma. The ion suppression, recovery and stability of the analyte in the biological matrix were also tested. The assay was rapid, sensitive and robust enough to support EDL-155 ocular penetration studies in a rodent model of intraocular cancer. Application of this method revealed that EDL-155 was rapidly passed into the vitreous humor following periocular administration. Further, vitreous humor exposure exceeded systemic exposure by approximately sevenfold. High local concentrations coupled with minimal systemic exposure supports further testing of EDL-155 as localized therapy for intraocular cancers.

A rapid and sensitive method for the quantitation of montelukast in sheep plasma using liquid chromatography/tandem mass spectrometry

A rapid LC-MS/MS method was developed and partially validated for the quantitation of montelukast in spiked sheep plasma. A total run time of 1.5 min was achieved using a short monolithic column and employing a rapid gradient. Sample preparation involved protein precipitation with twofold acetonitrile by volume during which a deuterated internal standard (montelukast D-6) was incorporated. The MRM transitions for montelukast and the deuterated internal standard were 586/422 and 592/427, respectively. A linear dynamic range of 0.25-500 ng/mL with a correlation coefficient of 0.9999 was achieved. Precision was below 5% at all levels except at the LOQ (0.36 ng/mL) which demonstrated an overall of R.S.D. of 8%. Post-column infusion experiments were performed with precipitated plasma matrix and showed minimal interference with the peaks of interest.

Use of trifluoroacetic acid to quantify small, polar compounds in rat plasma during discovery-phase pharmacokinetic evaluation

Although it is accepted that trifluoroacetic acid (TFA) can cause suppression of an analyte during LC/MS analysis, this paper presents a relatively sensitive gradient method that uses a TFA mobile phase for the improved quantification of small, polar drug-like compounds. The described method was developed in a discovery drug metabolism and pharmacokinetics (DMPK) laboratory for the screening measurement of compound concentrations to calculate PK parameters and CNS exposure of compounds from a chemical series that had poor chromatography under generic methods using formic acid mobile phase. The samples were collected by a Culex automated sampling unit, and the plasma proteins were precipitated by a Tecan robot in 96-well plates. After centrifugation, the supernatant was removed, dried down using a SPE-Dry unit, and the samples were reconstituted in aqueous buffer on the robot. The samples were analyzed on an Agilent LC/MSD using a 5-min gradient on a 5 cm phenyl column. No additional steps, such as the "TFA-fix", were necessary. Although sample batches were analyzed over 6h, no drift or degradation of signal was observed. The improved chromatography resulted in a method that was selective, rugged, and had a dynamic range from 5 to 20,000 nM, which was sufficient to quantitate low volume, serial plasma samples collected out to 8 h postdose.

Development of a μ-turbulent flow chromatography focus mode method for drug quantitation in discovery bioanalysis

An online turbulent flow chromatography method coupled to tandem mass spectrometry (TFC-MS/MS) has been developed within our bioanalytical group, suited to the analysis of mid to late stage discovery compounds. A dual column configuration utilising isocratic focusing of the analyte upon the analytical column maintained an excellent peak shape for a large proportion of compounds encountered and enabled consistent quantitation to sub-nanogram concentrations (<15 pg on column). Furthermore, the low sample injection volume coupled with rapid column washing using basic and acidic mobile phases, has proved advantageous in removing sample carryover and also the overall exposure to biological material; favourable for good system robustness. All the data discussed were generated with a method cycle time of 5 min providing accurate quantitation (acceptance criteria based upon FDA method validation guidelines) with multiple analytes and biological matrices.

Development of a quantitative LC–MS/MS analytical method coupled with turbulent flow chromatography for digoxin for the in vitro P-gp inhibition assay

Caco-2 cells, the human colon carcinoma cells, are typically used for screening compounds for their permeability characteristics and P-glycoprotein (P-gp) interaction potential during discovery and development. The P-gp inhibition of test compounds is assessed by performing bi-directional permeability studies with digoxin, a well established P-gp substrate probe. Studies performed with digoxin alone as well as digoxin in presence of test compounds as putative inhibitors constitute the P-gp inhibition assay used to assess the potential liability of discovery compounds. Radiolabeled (3)H-digoxin is commonly used in such studies followed by liquid scintillation counting. This manuscript describes the development of a sensitive, accurate, and reproducible LC-MS/MS method for analysis of digoxin and its internal standard digitoxin using an on-line extraction turbulent flow chromatography coupled to tandem mass spectrometric detection that is amendable to high throughput with use of 96-well plates. The standard curve for digoxin was linear between 10 nM and 5000 nM with regression coefficient (R(2)) of 0.99. The applicability and reliability of the analysis method was evaluated by successful demonstration of efflux ratio (permeability B to A over permeability A to B) greater than 10 for digoxin in Caco-2 cells. Additional evaluations were performed on 13 marketed compounds by conducting inhibition studies in Caco-2 cells using classical P-gp inhibitors (ketoconazole, cyclosporin, verapamil, quinidine, saquinavir etc.) and comparing the results to historical data with (3)H-digoxin studies. Similarly, P-gp inhibition studies with LC-MS/MS analytical method for digoxin were also performed for 21 additional test compounds classified as negative, moderate, and potent P-gp inhibitors spanning multiple chemo types and results compared with the historical P-gp inhibition data from the (3)H-digoxin studies. A very good correlation coefficient (R(2)) of 0.89 between the results from the two analytical methods affords an attractive LC-MS/MS analytical option for labs that need to conduct the P-gp inhibition assay without using radiolabeled compounds.

Recent advances in high-throughput quantitative bioanalysis by LC–MS/MS

Liquid chromatography linked to tandem mass spectrometry (LC-MS/MS) has played an important role in pharmacokinetics and metabolism studies at various drug development stages since its introduction to the pharmaceutical industry. This article reviews the most recent advances in sample preparation, separation, and the mass spectrometric aspects of high-throughput quantitative bioanalysis of drug and metabolites in biological matrices. Newly introduced techniques such as ultra-performance liquid chromatography with small particles (sub-2 microm) and monolithic chromatography offer improvements in speed, resolution and sensitivity compared to conventional chromatographic techniques. Hydrophilic interaction chromatography (HILIC) on silica columns with low aqueous/high organic mobile phase is emerging as a valuable supplement to the reversed-phase LC-MS/MS. Sample preparation formatted to 96-well plates has allowed for semi-automation of off-line sample preparation techniques, significantly impacting throughput. On-line solid-phase extraction (SPE) utilizing column-switching techniques is rapidly gaining acceptance in bioanalytical applications to reduce both time and labor required to produce bioanalytical results. Extraction sorbents for on-line SPE extend to an array of media including large particles for turbulent flow chromatography, restricted access materials (RAM), monolithic materials, and disposable cartridges utilizing traditional packings such as those used in Spark Holland systems. In the end, this paper also discusses recent studies of matrix effect in LC-MS/MS analysis and how to reduce/eliminate matrix effect in method development and validation.

Ultra-fast tandem mass spectrometry scanning combined with monolithic column liquid chromatography increases throughput in proteomic analysis

Liquid chromatography combined with electrospray ionization mass spectrometry (LC/ESI-MS) has been used successfully for the characterization of biomolecules in proteomics in the last few years. This methodology relied largely on the use of reversed-phase chromatography, in particular C18-based resins, which are suitable for separation of peptides. Here we show that polymeric [polystyrene divinylbenzene] monolithic columns can be used to separate peptide mixtures faster and at a higher resolution. For 500 fmol bovine serum albumin, up to 68% sequence coverage and Mascot Mowse scores of >2000 were obtained using a 9 min gradient on a monolithic column coupled to an ion trap mass spectrometer with ultra-fast MS/MS scan rates. In order to achieve similar results using C18 columns, it was necessary to extend gradient times to 30 min. In addition, we demonstrate the utility of this approach for the analysis of whole Escherichia coli cell lysates by one-dimensional sodium dodecyl sulfate polyacrylamide gel electrophoresis (1D-SDS-PAGE) in combination with LC/MS/MS using 4 min gradients on monolithic columns. Our results indicate higher throughput capabilities of monolithic columns (3-fold gain in time or more) for conventional proteomics applications, such as protein identification and high sequence coverage usually required for detection of post-translational modifications (PTMs). Further optimization of sensitivity and quality of sequence information is discussed, in particular when combined with mass spectrometers that have very fast MS-MS/MS switching and scanning capabilities.

Development of an on-line extraction turbulent flow chromatography tandem mass spectrometry method for cassette analysis of Caco-2 cell based bi-directional assay samples

Caco-2 cells are frequently used for screening compounds for their permeability characteristics and P-glycoprotein (P-gp) interaction potential. Bi-directional permeability studies performed on Caco-2 cells followed by analysis by HPLC-UV or LC-MS method constitutes the "method of choice" for the functional assessment of efflux characteristics of a test compound. A high throughput LC-MS/MS method has been developed using on-line extraction turbulent flow chromatography coupled to tandem mass spectrometric detection to analyze multiple compounds present in Hanks balanced salt solution in a single analytical run. All standard curves (P-gp substrates: quinidine, etoposide, rhodamine 123, dexamethasone, and verapamil and non-substrates: metoprolol, sulfasalazine, propranolol, nadolol, and furosemide) were prepared in a cassette mode (ten-in-one) while Caco-2 cell incubations were performed both in discreet mode and in cassette mode. The standard curve range for most compounds was 10-2500 nM with regression coefficients (R(2)) greater than 0.99 for all compounds. The applicability and reliability of the analysis method was evaluated by successful demonstration of efflux ratio greater than 1 for the P-gp substrates studied in the Caco-2 cell model. The use of cassette mode analysis through selected reaction monitoring mass spectrometry presents an attractive option to increase the throughput, sensitivity, selectivity, and efficiency of the model over discreet mode UV detection.