Assessing the properties of internal standards for quantitative matrix-assisted laser desorption/ionization mass spectrometry of small molecules

Quantification of pharmaceutical compounds in tissue and plasma samples using selective ion accumulation with multiple mass isolation windows

Quantification of pharmaceutical compounds using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) is an alternative to traditional liquid chromatography (LC)-MS techniques. Benefits of MALDI-based approaches include rapid analysis times for liquid samples and imaging mass spectrometry capabilities for tissue samples. As in most quantification experiments, the use of internal standards can compensate for spot-to-spot and shot-to-shot variability associated with MALDI sampling. However, the lack of chromatographic separation in traditional MALDI analyses results in diminished peak capacity due to the chemical noise background, which can be detrimental to the dynamic range and limit of detection of these approaches. These issues can be mitigated by using a hybrid mass spectrometer equipped with a quadrupole mass filter (QMF) that can be used to fractionate ions based on their mass-to-charge ratios. When the masses of the analytes and internal standards are sufficiently disparate in mass, it can be beneficial to effect multiple narrow mass isolation windows using the QMF, as opposed to a single wide mass isolation window, to minimize chemical noise while allowing for internal standard normalization. Herein, we demonstrate a MALDI MS quantification workflow incorporating multiple sequential mass isolation windows enabled on a QMF, which divides the total number of MALDI laser shots into multiple segments (i.e., one segment for each mass isolation window). This approach is illustrated through the quantitative analysis of the pharmaceutical compound enalapril in human plasma samples as well as the simultaneous quantification of three pharmaceutical compounds (enalapril, ramipril, and verapamil). Results show a decrease in the limit of detection, relative standard deviations below 10%, and accuracy above 85% for drug quantification using multiple mass isolation windows. This approach has also been applied to the quantification of enalapril in brain tissue from a rat dosed in vitro. The average concentration of enalapril determined by imaging mass spectrometry is in agreement with the concentration determined by LC-MS, giving an accuracy of 104%.

Lignin as a MALDI matrix for small molecules: a proof of concept

Driven by the interest in metabolomic studies and the progress of imaging techniques, small molecule analysis is booming, while it remains challenging to be realized by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Herein, lignin, the second most abundant biomass in nature, was applied as a dual-ion-mode MALDI matrix for the first time to analyze small molecules. The low ionization efficiency and strong optical absorption properties make lignin a potential MALDI matrix in small molecule analysis. A total of 30 different small molecules were identified qualitatively and six kinds of representative molecules were detected quantitatively with a good linear response (R² > 0.995). To verify the accuracy of our quantitative method in MALDI, myricitrin, a major bioactive component in Chinese bayberry, was analyzed in different cultivars and tissues. The myricitrin content in real samples detected by MALDI was highly consistent (R² > 0.999) with that detected by high-performance liquid chromatography, thus indicating the applicability of the lignin matrix. Further characterization by ultraviolet and nuclear magnetic resonance spectroscopy was carried out to explain the possible mechanism of lignin as a matrix and provide more theories for a rational matrix design.

Molecular tissue profiling by MALDI imaging: recent progress and applications in cancer research

Matrix-assisted laser desorption/ionization (MALDI) imaging is an emergent technology that has been increasingly adopted in cancer research. MALDI imaging is capable of providing global molecular mapping of the abundance and spatial information of biomolecules directly in the tissues without labeling. It enables the characterization of a wide spectrum of analytes, including proteins, peptides, glycans, lipids, drugs, and metabolites and is well suited for both discovery and targeted analysis. An advantage of MALDI imaging is that it maintains tissue integrity, which allows correlation with histological features. It has proven to be a valuable tool for probing tumor heterogeneity and has been increasingly applied to interrogate molecular events associated with cancer. It provides unique insights into both the molecular content and spatial details that are not accessible by other techniques, and it has allowed considerable progress in the field of cancer research. In this review, we first provide an overview of the MALDI imaging workflow and approach. We then highlight some useful applications in various niches of cancer research, followed by a discussion of the challenges, recent developments and future prospect of this technique in the field.

Absolute quantification of 2-hydroxyglutarate on tissue by matrix-assisted laser desorption/ionization mass spectrometry imaging for rapid and precise identification of isocitrate dehydrogenase mutations in human glioma

Isocitrate dehydrogenase (IDH) gene mutations are important predictive molecular markers to guide surgical strategy in brain cancer therapy. Herein, we presented a method using matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) for absolute quantification of 2-hydroxyglutarate (2-HG) on tissues to identify IDH mutations and evaluate tumor residue. This analytical method was tested among 34 glioma patients and validated with gold standard clinical technologies. The cut-off value of 2-HG was set as 0.81 pmol/μg to identify IDH mutant (IDHmt) gliomas with 100% specificity and sensitivity. In addition, 2-HG levels and tumor cell density (TCD) showed positive correlation in IDHmt gliomas by this spatial method. This MALDI MSI-based absolute quantification method has great potentiality for incorporating into surgical workflow in the future.

C60-based chemical labeling strategy for the determination of polyamines in biological samples using matrix-assisted laser desorption/ionization mass spectrometry

Bioactive polyamines play important roles in many biological processes such as gene expression, cell growth, protein synthesis, and signal transduction. Accurate determination of polyamines is helpful for studying their biological functions. Herein, a C₆₀-based chemical labeling strategy was proposed for the determination of polyamines (putrescine, cadaverine, spermidine, and spermine) in biological samples using matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). An N-hydroxysuccinimide ester functionalized C₆₀ (NHS-C₆₀) was used as a labeling reagent and the m/z of the labeled polyamines reached up to more than 900 Da, which avoided matrix interferences in the low m/z region. In addition, as NHS-C₆₀ derivatives, mono- and bis-substituted polyamines were produced simultaneously, which benefited the qualitative analysis of polyamines. The analytical method was validated using NHS-C₆₀ labeled polyamines in cells and mice feces samples. Good linearities were obtained with correlation coefficients ranging from 0.9786 to 0.9982. The limits of quantification were in the range of 0.68-1.48 pmol. Good reproducibility and reliability of our proposed method were confirmed by intra- and inter-day precisions ranged from 2.8 to 16.6%, and the recoveries ranged between 81.8 and 119.9%. Finally, the proposed method was applied to determine polyamines in cells and mice feces. Three polyamines were detected in the cells, and the contents of cadaverine and spermidine in the feces of high-fat diet mice were found to be significantly lower than those in the normal diet mice. The results show that the proposed NHS-C₆₀ labeling coupled with MALDI MS strategy is suitable for the determination of polyamines in biological samples.

Applications of stable isotopes in MALDI imaging: current approaches and an eye on the future

Matrix-assisted laser desorption/ionisation-imaging mass spectrometry (MALDI-IMS) is now an established imaging modality with particular utility in the study of biological, biomedical and pathological processes. In the first instance, the use of stable isotopically labelled (SIL) compounds in MALDI-IMS has addressed technical barriers to increase the accuracy and versatility of this technique. This has undoubtedly enhanced our ability to interpret the two-dimensional ion intensity distributions produced from biological tissue sections. Furthermore, studies using delivery of SIL compounds to live tissues have begun to decipher cell, tissue and inter-tissue metabolism while maintaining spatial resolution. Here, we review both the technical and biological applications of SIL compounds in MALDI-IMS, before using the uptake and metabolism of glucose in bovine ocular lens tissue to illustrate the current limitations of SIL compound use in MALDI-IMS. Finally, we highlight recent instrumentation advances that may further enhance our ability to use SIL compounds in MALDI-IMS to understand biological and pathological processes. Graphical Abstract.

Compartmentalized Arrays of Matrix Droplets for Quantitative Mass Spectrometry Imaging of Adsorbed Peptides

Mass spectrometry imaging (MSI) based on matrix-assisted laser desorption/ionization (MALDI) provides information on the identification and spatial distribution of biomolecules. Quantitative analysis, however, has been challenging largely due to heterogeneity in both the size of the matrix crystals and the extraction area. In this work, we present a compartmentalized elastomeric stamp for quantitative MALDI-MSI of adsorbed peptides. Filling the compartments with matrix solution and stamping onto a planar substrate extract and concentrate analytes adsorbed in each compartment into a single analyte-matrix cocrystal over the entire stamped area. Walls between compartments help preserve spatial information on the adsorbates. The mass intensity of the cocrystals directly correlates with the surface coverage of analytes, which enables not only quantitative analysis but estimation of an equilibrium constant for the adsorption. We demonstrate via MALDI-MSI relative quantitation of peptides adsorbed along a microchannel with varying surface coverages.

A simple MALDI target plate with channel design to improve detection sensitivity and reproducibility for quantitative analysis of biomolecules

Overcoming the detrimental effects of sweet spots during crystallization is an important step to improve the quantitative abilities of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. In this study, we introduce MALDI targets, which exhibit a channel design to reduce sweet spot phenomena and improve reproducibility. The size of the channels was 3.0 mm in length, 0.35 mm in depth, and 0.40 mm in width, adjusted to the width of the implemented laser beam. For sample deposition, the matrix/sample mixture was homogenously deposited into the channels using capillary action. To demonstrate the proof-of-principle, the novel plates were used for the quantification of acetyl-L-carnitine in human blood plasma using a combined standard addition and isotope dilution method. The results showed that the reproducibility of acetyl-L-carnitine detection was highly improved over a conventional MALDI-MS assay, with RSD values of less than 5.9% in comparison with 15.6% using the regular MALDI method. The limits of quantification using the new plates were lowered approximately two-fold in comparison with a standard rastering approach on a smooth stainless-steel plate. Matrix effects were also assessed and shown to be negligible. The new assay was subsequently applied to the quantification of acetyl-L-carnitine in human plasma samples.

Selection of Internal Standards for Quantitative Matrix-Assisted Laser Desorption/Ionization Mass Spectrometric Analysis Based on Correlation Coefficients

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) has shown its great success in the qualitative analysis of a wide range of organic and biological molecules. However, its application in quantitative analysis is still limited by the difficulty in the availability of isotope-labeled internal standards. The present work investigates the relationship between the correlation coefficient of the peak intensities of analyte and candidate internal standard ions and the linearity of possible quantitative analysis. Based on the two analyte examples, ciprofloxacin and substance P, the results show that the performance of the selected nonisotope-labeled internal standard is greatly related to the correlation coefficient. A high positive correlation coefficient (>0.7) between the ions of analyte and candidate standard can result in a good linearity (R ² > 0.98) and vice versa. The results provide a new way to select nonisotope-labeled internal standards for MALDI analysis and thus can be potentially applied in the rapid quantitative mass spectrometry.

Heterogeneous distribution of alectinib in neuroblastoma xenografts revealed by matrix-assisted laser desorption ionization mass spectrometry imaging: a pilot study

BACKGROUND AND PURPOSE

The penetration of the anaplastic lymphoma kinase (ALK) inhibitor alectinib in neuroblastomas and the relationship between alectinib and ALK expression are unknown. The aim of this study was to perform a quantitative investigation of the inter- and intra-tumoural distribution of alectinib in different neuroblastoma xenograft models using matrix-assisted laser desorption ionization MS imaging (MALDI-MSI).

EXPERIMENTAL APPROACH

The distribution of alectinib in NB1 (ALK amplification) and SK-N-FI (ALK wild-type) xenograft tissues was analysed using MALDI-MSI. The abundance of alectinib in tumours and intra-tumoural areas was quantified using ion signal intensities from MALDI-MSI after normalization by correlation with LC-MS/MS.

KEY RESULTS

The distribution of alectinib was heterogeneous in neuroblastomas. The penetration of alectinib was not significantly different between ALK amplification and ALK wide-type tissues using both LC-MS/MS concentrations and MSI intensities. Normalization with an internal standard increased the quantitative property of MSI by adjusting for the ion suppression effect. The distribution of alectinib in different intra-tumoural areas can alternatively be quantified from MS images by correlation with LC-MS/MS.

CONCLUSION AND IMPLICATIONS

The penetration of alectinib into tumour tissues may not be homogenous or influenced by ALK expression in the early period after single-dose administration. MALDI-MSI may prove to be a valuable pharmaceutical method for elucidating the mechanism of action of drugs by clarifying their microscopic distribution in heterogeneous tissues.

Recommendations for quantitative analysis of small molecules by matrix-assisted laser desorption ionization mass spectrometry

Matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) has been used for quantitative analysis of small molecules for many years. It is usually preceded by an LC separation step when complex samples are tested. With the development several years ago of "modern MALDI" (automation, high repetition laser, high resolution peaks), the ease of use and performance of MALDI as a quantitative technique greatly increased. This review focuses on practical aspects of modern MALDI for quantitation of small molecules conducted in an ordinary way (no special reagents, devices or techniques for the spotting step of MALDI), and includes our ordinary, preferred methods The review is organized as 18 recommendations with accompanying explanations, criticisms and exceptions.

Quantification of low molecular weight compounds by MALDI imaging mass spectrometry - A tutorial review

Matrix-assisted laser desorption/ionization (MALDI)-mass spectrometry imaging (MSI) permits label-free in situ analysis of chemical compounds directly from the surface of two-dimensional biological tissue slices. It links qualitative molecular information of compounds to their spatial coordinates and distribution within the investigated tissue. MALDI-MSI can also provide the quantitative amounts of target compounds in the tissue, if proper calibration techniques are performed. Obviously, as the target molecules are embedded within the biological tissue environment and analysis must be performed at their precise locations, there is no possibility for extensive sample clean-up routines or chromatographic separations as usually performed with homogenized biological materials; ion suppression phenomena therefore become a critical side effect of MALDI-MSI. Absolute quantification by MALDI-MSI should provide an accurate value of the concentration/amount of the compound of interest in relatively small, well-defined region of interest of the examined tissue, ideally in a single pixel. This goal is extremely challenging and will not only depend on the technical possibilities and limitations of the MSI instrument hardware, but equally on the chosen calibration/standardization strategy. These strategies are the main focus of this article and are discussed and contrasted in detail in this tutorial review. This article is part of a Special Issue entitled: MALDI Imaging, edited by Dr. Corinna Henkel and Prof. Peter Hoffmann.

Critical factors determining the quantification capability of matrix-assisted laser desorption/ionization- time-of-flight mass spectrometry

Quantitative analysis with mass spectrometry (MS) is important but challenging. Matrix-assisted laser desorption/ionization (MALDI) coupled with time-of-flight (TOF) MS offers superior sensitivity, resolution and speed, but such techniques have numerous disadvantages that hinder quantitative analyses. This review summarizes essential obstacles to analyte quantification with MALDI-TOF MS, including the complex ionization mechanism of MALDI, sensitive characteristics of the applied electric fields and the mass-dependent detection efficiency of ion detectors. General quantitative ionization and desorption interpretations of ion production are described. Important instrument parameters and available methods of MALDI-TOF MS used for quantitative analysis are also reviewed.This article is part of the themed issue 'Quantitative mass spectrometry'.

MALDI-MS drug analysis in biological samples: opportunities and challenges

Drug analysis represents a large field in different disciplines. Plasma is commonly considered to be the biosample of choice for that purpose. However, concentrations often do not represent the levels present within deeper compartments and therefore cannot sufficiently explain efficacy or toxicology of drugs. MALDI-MS in drug analysis is of great interest for high-throughput quantification and particularly spatially resolved tissue imaging. The current perspective article will deal with challenges and opportunities of MALDI-MS drug analysis in different biological samples. A particular focus will be on hair samples. Recent applications were included, reviewed for their instrumental setup and sample preparation and pros and cons as well as future perspectives are critically discussed.

The use of mass spectrometry to analyze dried blood spots

Dried blood spots (DBS) typically consist in the deposition of small volumes of capillary blood onto dedicated paper cards. Comparatively to whole blood or plasma samples, their benefits rely in the fact that sample collection is easier and that logistic aspects related to sample storage and shipment can be relatively limited, respectively, without the need of a refrigerator or dry ice. Originally, this approach has been developed in the sixties to support the analysis of phenylalanine for the detection of phenylketonuria in newborns using bacterial inhibition test. In the nineties tandem mass spectrometry was established as the detection technique for phenylalanine and tyrosine. DBS became rapidly recognized for their clinical value: they were widely implemented in pediatric settings with mass spectrometric detection, and were closely associated to the debut of newborn screening (NBS) programs, as a part of public health policies. Since then, sample collection on paper cards has been explored with various analytical techniques in other areas more or less successfully regarding large-scale applications. Moreover, in the last 5 years a regain of interest for DBS was observed and originated from the bioanalytical community to support drug development (e.g., PK studies) or therapeutic drug monitoring mainly. Those recent applications were essentially driven by improved sensitivity of triple quadrupole mass spectrometers. This review presents an overall view of all instrumental and methodological developments for DBS analysis with mass spectrometric detection, with and without separation techniques. A general introduction to DBS will describe their advantages and historical aspects of their emergence. A second section will focus on blood collection, with a strong emphasis on specific parameters that can impact quantitative analysis, including chromatographic effects, hematocrit effects, blood effects, and analyte stability. A third part of the review is dedicated to sample preparation and will consider off-line and on-line extractions; in particular, instrumental designs that have been developed so far for DBS extraction will be detailed. Flow injection analysis and applications will be discussed in section IV. The application of surface analysis mass spectrometry (DESI, paper spray, DART, APTDCI, MALDI, LDTD-APCI, and ICP) to DBS is described in section V, while applications based on separation techniques (e.g., liquid or gas chromatography) are presented in section VI. To conclude this review, the current status of DBS analysis is summarized, and future perspectives are provided.

Fast quantitative determination of methylphenidate levels in rat plasma and brain ex vivo by MALDI-MS/MS

This study presents a simple and sensitive high-throughput matrix-assisted laser desorption/ionization time-of-flight tandem mass spectrometry (MALDI-MS/MS) method for ex vivo quantification of methylphenidate (MPH) in rat plasma and brain. The common MALDI matrix alpha-cyano-4-hydroxycinnamic acid was used to obtain an optimal dried droplet preparation. For method validation, standards diluted in plasma and brain homogenate prepared from untreated (control) rats were used. MPH was quantified within a concentration range of 0.1-40 ng/ml in plasma and 0.4-40 ng/ml in brain homogenate with an excellent linearity (R²  ≥ 0.9997) and good precision. The intra-day and inter-day accuracies fulfilled the FDA's ±15/20 critera. The recovery of MPH ranged from 93.8 to 98.5% and 87.2 to 99.8% in plasma and homogenate, respectively. We show that MPH is successfully quantified in plasma and brain homogenate of rats pre-treated with this drug using the internal standard calibration method. By means of this method, a linear correlation between plasma and brain concentration of MPH in rodents pre-treated with MPH was detected. The simple sample preparation based on liquid-liquid extraction and MALDI-MS/MS measurement requires approximately 10 s per sample, and this significantly reduces analysis time compared with other analytical methods. To the best of our knowledge, this is the first MALDI-MS/MS method for quantification of MPH in rat plasma and brain. Copyright © 2015 John Wiley & Sons, Ltd.

Influence of surface melting effects and availability of reagent ions on LDI-MS efficiency after UV laser irradiation of Pd nanostructures

In this study, the influence of surface morphology, reagent ions and surface restructuring effects on atmospheric pressure laser desorption/ionization (LDI) for small molecules after laser irradiation of palladium self-assembled nanoparticular (Pd-NP) structures has been systematically studied. The dominant role of surface morphology during the LDI process, which was previously shown for silicon-based substrates, has not been investigated for metal-based substrates before. In our experiments, we demonstrated that both the presence of reagent ions and surface reorganization effects--in particular, melting--during laser irradiation was required for LDI activity of the substrate. The synthesized Pd nanostructures with diameters ranging from 60 to 180 nm started to melt at similar temperatures, viz. 890-898 K. These materials exhibited different LDI efficiencies, however, with Pd-NP materials being the most effective surface in our experiments. Pd nanostructures of diameters >400-800 nm started to melt at higher temperatures, >1000 K, making such targets more resistant to laser irradiation, with subsequent loss of LDI activity. Our data demonstrated that both melting of the surface structures and the presence of reagent ions were essential for efficient LDI of the investigated low molecular weight compounds. This dependence of LDI on melting points was exploited further to improve the performance of Pd-NP-based sampling targets. For example, adding sodium hypophosphite as reducing agent to Pd electrolyte solutions during synthesis lowered the melting points of the Pd-NP materials and subsequently gave reduced laser fluence requirements for LDI.

Quantification in MALDI-MS imaging: what can we learn from MALDI-selected reaction monitoring and what can we expect for imaging?

Quantification by mass spectrometry imaging (Q-MSI) is one of the hottest topics of the current discussions among the experts of the MS imaging community. If MSI is established as a powerful qualitative tool in drug and biomarker discovery, its reliability for absolute and accurate quantification (QUAN) is still controversial. Indeed, Q-MSI has to deal with several fundamental aspects that are difficult to control, and to account for absolute quantification. The first objective of this manuscript is to review the state-of-the-art of Q-MSI and the current strategies developed for absolute quantification by direct surface sampling from tissue sections. This includes comments on the quest for the perfect matrix-matched standards and signal normalization approaches. Furthermore, this work investigates quantification at a pixel level to determine how many pixels must be considered for accurate quantification by ultraviolet matrix-assisted laser desorption/ionization (MALDI), the most widely used technique for MSI. Particularly, this study focuses on the MALDI-selected reaction monitoring (SRM) in rastering mode, previously demonstrated as a quantitative and robust approach for small analyte and peptide-targeted analyses. The importance of designing experiments of good quality and the use of a labeled compound for signal normalization is emphasized to minimize the signal variability. This is exemplified by measuring the signal for cocaine and a tryptic peptide (i.e., obtained after digestion of a monoclonal antibody) upon different experimental conditions, such as sample stage velocity, laser power and frequency, or distance between two raster lines. Our findings show that accurate quantification cannot be performed on a single pixel but requires averaging of at least 4-5 pixels. The present work demonstrates that MALDI-SRM/MSI is quantitative with precision better than 10-15 %, which meets the requirements of most guidelines (i.e., in bioanalysis or toxicology) for quantification of drugs or peptides from tissue homogenates.

Importance of the matrix and the matrix/sample ratio in MALDI-TOF-MS analysis of cathelicidins obtained from porcine neutrophils

Qualitative and quantitative mass spectrometric studies of biomolecules for example proteins, peptides, or lipids contained in biological samples like physiologic fluids are very important for many fields of science such as medicine, veterinary medicine, biology, biochemistry, molecular biology, or environmental sciences. In the last two decades, MALDI TOF MS — matrix-assisted laser desorption mass spectrometry, proved to be an especially convenient tool for these analyses. The main advantages of this method are its rapidity and high sensitivity which is particularly appreciated in the case of studies of complex biological specimen. A major challenge for many researchers is to maximize this sensitivity, among others, by appropriate procedures of sample preparation for the measurement. The objective of this work was to optimize these procedures, selecting the optimal matrix and optimum proportions of the sample and the matrix solution in a mixture of both solutions, aiming at the achievement of the maximum intensity of ion current. In this respect, five low molecular mass cathelicidins were studied: prophenin-2, protegrins 1–3, PR-39. All of them were obtained directly from the porcine blood. As a result of studies, the authors determined such experimental conditions when the intensity of investigated ionic current had the highest value.

Quantification of saquinavir from lysates of peripheral blood mononuclear cells using microarrays and standard MALDI-TOF-MS

Drug monitoring is usually performed by liquid chromatography coupled with optical detection or electrospray ionization mass spectrometry. More recently, matrix-assisted laser desorption/ionization (MALDI) in combination with triple quadrupole or Fourier-transform (FT) mass analyzers has also been reported to allow accurate quantification. Here, we present a strategy that employs standard MALDI time-of-flight (TOF) mass spectrometry (MS) for the sensitive and accurate quantification of saquinavir from an extract of blood peripheral mononuclear cells. Unambiguous identification of saquinavir in the mass spectra was possible because of using internal mass calibration and by an overall low chemical noise in the low mass range. Exact mass determination of the constant background peaks of the cell extract, which were used for recalibration, was performed by an initial MALDI-FT-MS analysis. Fast and multiplexed sample analysis was enabled by microarray technology, which provided 10 replicates in the lower nL range for each sample in parallel lanes on a chip. In order to validate the method, we employed various statistical tests, such as confidence intervals for linear regressions, three quality control samples, and inverse confidence limits of the estimated concentration ratios.

Study of Isobaric Interference in Quantification of Citrulline by Parallel Fragmentation Monitoring

Parallel Fragmentation Monitoring (PFM), which is an analogue of selected reaction monitoring (SRM), is a recently developed method for quantification of small molecules by MALDI-TOF/TOF mass spectrometry (MS). It is well known that isobaric interference substances can be occasionally present in complex biological samples, and affect the accuracy of measurement by SRM. Unfortunately, by design it is not possible to assess whether isobaric interference happens in a SRM analysis. In contrast, the unique design of PFM should allow quick inspection for isobaric interference and subsequent correction. In this study, using arginine as an example, interference effect of isobaric structural analogs on the quantification of citrulline by PFM was evaluated. Our results showed that the presence of arginine affected the measured concentrations of citrulline standard solutions in a concentration dependent manner. Such interference could be observed readily in the MS/MS spectra, and contributed by [arginine+H-NH3](+) fragment ion. Because of having highly similar mass, (13)C-isotope of [arginine+H-NH3](+) fragment ion overlapped with monoisotope of [citrulline+H-NH3](+) fragment ion, which was used as the report ion for quantification. However, such interference could be mathematically eliminated or minimized through estimation of the signal intensity of the (13)C-isotopic peak of [arginine+H-NH3](+) from the intensity of the corresponding monoisotopic peak according to isotope distribution of elements. Furthermore, the presence of interfering fragment ions could be avoided by optimizing MALDI ionization condition. In conclusion, isobaric interference can happen in PFM, but can be easily identified in the mass spectra and eliminated (minimized) with simple methods.

Screening Dyrk1A inhibitors by MALDI-QqQ mass spectrometry: systematic comparison to established radiometric, luminescence, and LC-UV-MS assays

Enzyme-catalyzed reactions play key roles in disease pathology, thus making them relevant subjects of therapeutic inhibitor screening experiments. Matrix-assisted laser desorption/ionization (MALDI) assays have been demonstrated to be able to replace established screening approaches. They offer increased sample throughput, but care must be taken to avoid instrumental bias from differences in ionization efficiencies. We compared a MALDI-triple-quadrupole (QqQ) method for the Dyrk1A peptide substrate woodtide to LC-MS, liquid chromatography with ultraviolet detection (LC-UV), luminescence, and radiometric assays. MALDI measurements were performed on a MALDI-QqQ instrument in the multiple-reaction monitoring mode. Different MALDI conditions were investigated to address whether matrix type, sample support, and MRM- or SIM-based detection conditions can be used to accommodate the molar responses of substrate peptide and its phosphorylated form. UV detection served as a reference method. The impact of MALDI matrix on IC50 values was small, even considering that matrix preparations were used that are known to alleviate response differences. IC50 values determined by MALDI were ca. 2-fold lower than those determined by LC-UV. Although MALDI generated lower ion yields for the phosphorylated peptide than for the peptide substrate, we found that a correction of compound potencies was readily possible using correction factors based on unbiased LC-UV results. A thorough method development delivered a robust assay with excellent performance (Z' > 0.91) that was close to that seen for LC-UV.

Qualitative and quantitative mass spectrometry imaging of drugs and metabolites in tissue at therapeutic levels

Mass spectrometry imaging (MSI) is a rapidly evolving technology that yields qualitative and quantitative distribution maps of small pharmaceutical-active molecules and their metabolites in tissue sections in situ. The simplicity, high sensitivity and ability to provide comprehensive spatial distribution maps of different classes of biomolecules make MSI a valuable tool to complement histopathology for diagnostics and biomarker discovery. In this review, qualitative and quantitative MSI of drugs and metabolites in tissue at therapeutic levels are discussed and the impact of this technique in drug discovery and clinical research is highlighted.

Matrix-assisted laser desorption/ionization for simultaneous quantitation of (acyl-)carnitines and organic acids in dried blood spots

RATIONALE

Screening for inborn errors of metabolism using mass spectrometry is part of nationwide newborn screening programs and involves the detection of disease relevant (acyl-)carnitines and organic acids from dried blood spots. Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry (MALDI-MS) is a well-established tool for proteomics approaches. In recent years, this technique has become more and more integrated in analysis and identification of small metabolites and disease biomarkers in daily clinical laboratories.

METHODS

We used a combination of both MALDI and high-resolution accurate mass (HR/AM) mass spectrometry using a linear ion trap-Orbitrap for the identification of small molecules from dried blood spots that serve as biomarkers for inborn errors of metabolism. The levels of detected metabolite species were compared between healthy newborns and affected patients with various inborn errors of metabolism using isotopically labeled internal standards and new bioinformatics software, respectively.

RESULTS

(Acyl-)carnitine levels from normal and affected patients could be quantified and differentiated. Additionally, using the high resolving power of full scan Orbitrap mass spectrometry and novel software tools we demonstrated the identification and quantification of disease-specific organic acids.

CONCLUSIONS

MALDI-HR/AM and full scan spectra to obtain information for the metabolic status of patients is a promising complementary approach to electrospray ionization mass spectrometry by simplified sample preparation, facilitating the screening of hundreds of metabolites from small sample volumes.

Quantitative analysis of anthocyanins in Euterpe oleracea (açaí) dietary supplement raw materials and capsules by Q-TOF liquid chromatography/mass spectrometry

CONTEXT

Euterpe oleracea Mart. (Arecaceae) fruits and their dietary supplements are gaining much popularity internationally. Anthocyanins and their aglycons are responsible for the dense color of açaí fruit and are associated with a wide spectrum of health promoting effects.

OBJECTIVE

Quantitative analysis of anthocyanins in açaí dietary supplement raw materials; processed açaí powder (ADSR-1), organic açaí powder (ADSR-2), and nonorganic açaí powder (ADSR-3) by quadrupole-time-of-flight liquid chromatography/mass spectrometry (Q-TOF LC/MS) have been reported in this study.

MATERIALS AND METHODS

The chromatographic separation for anthocyanins was achieved using a C-18 column with a gradient of 0.1% formic acid in water and 0.1% formic acid in methanol and acetonitrile (50:50, v/v). MS and MS/MS experiments were carried out on an electrospray ionization-Q-TOF LC/MS.

RESULTS

Except for ASDR-2, all the açaí samples were found to have cyanidin 3-glucoside (1), cyanidin 3-sambubioside (2), cyanidin 3-rutinoside (3), and peonidin 3-rutinoside (4). ASDR-2 contained anthocyanins 1 and 3. Among the açaí samples quantified, ADSR-3 showed higher concentration of anthocyanins compared to other raw materials and capsules tested in this study.

DISCUSSION AND CONCLUSION

The anthocyanins 1-4 present in ADSR-3 were 27.13 ± 0.37, 1.76 ± 0.04, 31.07 ± 0.49, and 3.46 ± 0.08 mg/100 g dry wt, respectively. The LOQ values for anthocyanins 1-4 were in the range of 2.44-9.76 ng/mL. Accuracy of the method was assessed by performing a recovery experiments. The intraday and interday variations (RSDs) were <10%. This is the first report on quantitation of anthocyanins in açaí dietary supplement raw materials and capsules.

Quantitative mass spectrometry imaging of propranolol and olanzapine using tissue extinction calculation as normalization factor

In order to quantify small molecules at the early stage of drug discovery, we developed a quantitation approach based on mass spectrometry imaging (MSI) using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) without the use of a labeled compound. We describe a method intended to respond to the main challenges encountered in quantification through MALDI imaging dedicated to whole-body or single heterogeneous organ samples (brain, eye, liver). These include the high dependence of the detected signal on the matrix deposition, the MALDI ionization yield of specific target molecules, and lastly, the ion suppression effect on the tissue. To address these challenges, we based our approach on the use of a normalization factor called the TEC (Tissue Extinction Coefficient). This factor takes into account the ion suppression effect that is both tissue- and drug-specific. Through this protocol, the amount of drug per gram of tissue was determined, which in turn, was compared with other analytical techniques such as Liquid Chromatography-Mass spectrometry (LC-MS/MS).

Single hair cocaine consumption monitoring by mass spectrometric imaging

Matrix-assisted laser desorption/ionization mass spectrometric imaging (MALDI-MSI) was used to image the distribution of cocaine and its metabolites in intact single hair samples from chronic users down to a concentration of 5 ng/mg. Acquisitions were performed in rastering mode, at a speed of 1 mm/s and in the selected reaction monitoring (SRM) mode on a MALDI triple quadrupole linear ion trap fitted with a high repetition rate laser (1 kHz). Compared to traditional methods based on LC-MS/MS or GC-MS(/MS) which require to segment the hair to obtain spatial resolution, MALDI-MSI, with a straightforward sample preparation beforehand, allowed obtaining a spatial resolution of 1 mm and thus the chronological information about cocaine consumption contained in a single intact hair over several months could be monitored. The analysis time of an intact single hair sample of 6 cm is approximately of 6 min. Cocaine and its metabolites benzoylecgonine, ethylcocaine, and norcocaine were investigated in nine sets of hair samples for forensic purposes. The analyses were accomplished by spraying α-cyano-4-hydroxycinnamic acid (CHCA), 4-chloro-α-cyano-cinnamic acid (Cl-CCA), or (E)-2-cyano-3-(naphthalen-2-yl)acrylic acid (NpCCA) as MALDI matrices. We also propose a rapid strategy for sensitive confirmatory analyses with both MS/MS and MS(3) experiments performed directly on intact hair samples. Since only part of the hair strand is analyzed, additional analyses are possible at any time on the remaining hair from the strand.

Quantitative analysis of phospholipids using nanostructured laser desorption ionization targets

Since its introduction as an ionization technique in mass spectrometry, matrix-assisted laser desorption ionization (MALDI) has been applied to a wide range of applications. Quantitative small molecule analysis by MALDI, however, is limited due to the presence of intense signals from the matrix coupled with non-homogeneous surfaces. The surface used in nano-structured laser desorption ionization (NALDI) eliminates the need for a matrix and the resulting interferences, and allows for quantitative analysis of small molecules. This study was designed to analyze and quantitate phospholipid components of liposomes. Here we have developed an assay to quantitate the DPPC and DC(8,9)PC in liposomes by NALDI following various treatments. To test our method we chose to analyze a liposome system composed of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and DC(8,9)PC (1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine), as DC(8,9)PC is known to undergo cross-linking upon treatment with UV (254 nm) and this reaction converts the monomer into a polymer. First, calibration curves for pure lipids (DPPC and DC(8,9)PC) were created using DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) as an internal standard. The calibration curve for both DPPC and DC(8,9)PC showed an R(2) of 0.992, obtained using the intensity ratio of analyte and internal standard. Next, DPPC:DC(8,9)PC liposomes were treated with UV radiation (254 nm). Following this treatment, lipids were extracted from the liposomes and analyzed. The analysis of the lipids before and after UV exposure confirmed a decrease in the signal of DC(8,9)PC of about 90%. In contrast, there was no reduction in DPPC signal.

Alternative CHCA-based matrices for the analysis of low molecular weight compounds by UV-MALDI-tandem mass spectrometry

Analysis of low molecular weight compounds (LMWC) in complex matrices by vacuum matrix-assisted laser desorption/ionization (MALDI) often suffers from matrix interferences, which can severely degrade limits of quantitation. It is, therefore, useful to have available a range of suitable matrices, which exhibit complementary regions of interference. Two newly synthesized α-cyanocinnamic acid derivatives are reported here; (E)-2-cyano-3-(naphthalen-2-yl)acrylic acid (NpCCA) and (2E)-3-(anthracen-9-yl)-2-cyanoprop-2enoic acid (AnCCA). Along with the commonly used α-cyano-4-hydroxycinnamic acid (CHCA), and the recently developed 4-chloro-α-cyanocinnamic acid (Cl-CCA) matrices, these constitute a chemically similar series of matrices covering a range of molecular weights, and with correspondingly differing ranges of spectral interference. Their performance was compared by measuring the signal-to-noise ratios (S/N) of 47 analytes, mostly pharmaceuticals, with the different matrices using the selected reaction monitoring (SRM) mode on a triple quadrupole instrument equipped with a vacuum MALDI source. AnCCA, NpCCA and Cl-CCA were found to offer better signal-to-noise ratios in SRM mode than CHCA, but Cl-CCA yielded the best results for 60% of the compounds tested. To better understand the relative performance of this matrix series, the proton affinities (PAs) were measured using the kinetic method. Their relative values were: AnCCA > CHCA > NpCCA > Cl-CCA. This ordering is consistent with the performance data. The synthesis of the new matrices is straightforward and they provide (1) tunability of matrix background interfering ions and (2) enhanced analyte response for certain classes of compounds.

Biomedical application of MALDI mass spectrometry for small-molecule analysis

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) is an emerging analytical tool for the analysis of molecules with molar masses below 1,000 Da; that is, small molecules. This technique offers rapid analysis, high sensitivity, low sample consumption, a relative high tolerance towards salts and buffers, and the possibility to store sample on the target plate. The successful application of the technique is, however, hampered by low molecular weight (LMW) matrix-derived interference signals and by poor reproducibility of signal intensities during quantitative analyses. In this review, we focus on the biomedical application of MALDI-MS for the analysis of small molecules and discuss its favorable properties and its challenges as well as strategies to improve the performance of the technique. Furthermore, practical aspects and applications are presented.

Quantitative MALDI-MS(n) analysis of cocaine in the autopsied brain of a human cocaine user employing a wide isolation window and internal standards

Detection of drugs in tissue typically requires extensive sample preparation in which the tissue is first homogenized, followed by drug extraction, before the extracts are finally analyzed by LC/MS. Directly analyzing drugs in intact tissue would eliminate any complications introduced by sample pretreatment. A matrix-assisted laser desorption/ionization tandem mass spectrometry (MALDI-MS(n)) method as been developed for the quantification of cocaine present in postmortem brain tissue of a chronic human cocaine user. It is shown that tandem mass spectrometry (MS(2) and MS(3) increase selectivity, which is critical for differentiating analyte ions from background ions such as matrix clusters and endogenous compounds found in brain tissue. It is also shown that the use of internal standards corrects for signal variability during quantitative MALDI, which can be caused by inhomogeneous crystal formation, inconsistent sample preparation, and laser shot-to-shot variability. The MALDI-MS(n) method developed allows for a single MS(3) experiment that uses a wide isolation window to isolate both analyte and internal standard target ions. This method is shown to provide improved precision [approximately 10-20 times reduction in percent relative standard deviation (%RSD)] for quantitative analysis compared to using two alternating MS(3) experiments that separately isolate the target analyte and internal standard ions.

Evaluation and performance of desorption electrospray ionization using a triple quadrupole mass spectrometer for quantitation of pharmaceuticals in plasma

The present work describes the methodology and investigates the performance of desorption electrospray ionization (DESI) combined with a triple quadrupole mass spectrometer for the quantitation of small drug molecules in human plasma. Amoxepine, atenolol, carbamazepine, clozapine, prazosin, propranolol and verapamil were selected as target analytes while terfenadine was selected as the internal standard common to each of the analytes. Protein precipitation of human plasma using acetonitrile was utilized for all samples. Limits of detection were determined for all analytes in plasma and shown to be in the range 0.2-40 ng/mL. Quantitative analysis of amoxepine, prazosin and verapamil was performed over the range 20-7400 ng/mL and shown to be linear in all cases with R(2) >0.99. In most cases, the precision (relative standard deviation) and accuracy (relative error) of each method were less than or equal to 20%, respectively. The performance of the combined techniques made it possible to analyze each sample in 15 s illustrating DESI tandem mass spectrometry (MS/MS) as powerful tool for the quantitation of analytes in deproteinized human plasma.

Steroid assays in paediatric endocrinology

Most steroid disorders of the adrenal cortex come to clinical attention in childhood and in order to investigate these problems, there are many challenges to the laboratory which need to be appreciated to a certain extent by clinicians. The analysis of sex steroids in biological fluids from neonates, over adrenarche and puberty present challenges of specificities and concentrations often in small sample sizes. Different reference ranges are also needed for interpretations. For around 40 years, quantitative assays for the steroids and their regulatory peptide hormones have been possible using immunoassay techniques. Problems are recognised and this review aims to summarise the benefits and failings of immunoassays and introduce where tandem mass spectrometry is anticipated to meet the clinical needs for steroid analysis in paediatric endocrine investigations. It is important to keep a dialogue between clinicians and the laboratory, especially when any laboratory result does not make sense in the clinical investigation.

Comparative high-speed profiling of carboxylic acid metabolite levels by differential isotope-coded MALDI mass spectrometry

This present work describes the development of a novel high throughput comparative matrix-assisted laser desorption ionization (MALDI) mass spectrometry profiling technique for endogenous compounds using a new isotope-coded label for relative quantitation of carboxylic acids. The key new aspect of this technique was a differential label, 3-hydroxymethyl-1-ethylpyrididinium iodide (HMEP), designed specifically for simultaneous quantitative MALDI analysis of two physiological states. The HMEP-d(0) and HMEP-d(5) variants of the label were applied to profiling endogenous fatty acid levels during a fish oil intervention study, using the metabolite profile of every individual person in the study as their own personal analytical reference standard. Initially, analytical figures of merit such as sensitivity, linear dynamic range, limit of quantitation, and precision were determined from the comparative quantitation experiments. Importantly, the permanently charged HMEP mass tag not only increased the ionization efficiency of the studied fatty acids but also ensured that the solution phase properties of the analytes became more similar, allowing the use of CHCA as a single MALDI matrix compound for the entire range of analytes. The label exhibited a further very unique feature; it provided complete suppression of MALDI matrix-related ions. The MALDI assay was able to generate the data much faster than conventional gas chromatography (GC) methods for fatty acids. It is shown in this study that analyzing a single sample took less than 10 s with analytical results of comparable quality to those obtained by GC.

Rapid simultaneous quantitative determination of different small pharmaceutical drugs using a conventional matrix-assisted laser desorption/ionization time-of-flight mass spectrometry system

The present study establishes a simple, rapid and sensitive method for the simultaneous quantification of different small pharmaceutical drugs using a matrix-assisted laser desorption/ionization source (MALDI) coupled with a time-of-flight (TOF) mass analyzer. Neither time-consuming sample preparation, nor special target plates, isotopically labelled internal standards or other extra equipment are necessary. A simple standard dried-droplet preparation with the common matrix alpha-cyano-4-hydroxycinnamic acid (CHCA) was used. The background signals of CHCA in the low-mass region did not pose the presumed problem, because the sensitivity, resolution and mass accuracy of a modern MALDI-TOF MS system is sufficient to overcome this difficulty. Four experiments were performed in order to verify the quantification method. First, ten different phenothiazines were quantified in the range of 5-2000 nM (1-880 ng/mL). A good precision (relative standard deviation (RSD) 4.4-9.3%), linearity (R2 >0.99) and accuracy (error 4.7-11%) was obtained in all cases. Additionally, simultaneous quantification of these ten phenothiazines was carried out in human plasma without prior chromatographic separation in the range of 2-1750 ng/mL yielding good linearity, precision and accuracy (mean RSD 7.6%; R2 >0.99, mean error 8.0%). Accordingly, a quantitative analysis of ten chemically and pharmaceutically unrelated drugs was performed in the same way. A comparable linearity (R2 >0.99), precision (mean RSD 7.6%) and accuracy (mean error 8.3%) was obtained in the range of 5-2000 nM. Finally, the prazosin content of a commercial tablet was directly determined without further purification steps.

Quantitative matrix-assisted laser desorption/ionization mass spectrometry

This review summarizes the essential characteristics of matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectrometry (TOF MS), especially as they relate to its applications in quantitative analysis. Approaches to quantification by MALDI-TOF MS are presented and published applications are critically reviewed.

Quantitative analysis of antiretroviral drugs in lysates of peripheral blood mononuclear cells using MALDI-triple quadrupole mass spectrometry

We report here on the use of a prototype matrix-assisted laser desorption/ionization (MALDI)-triple quadrupole mass spectrometer for quantitative analysis of six antiretroviral drugs in lysates of peripheral blood mononuclear cells (PBMC). Of the five investigated MALDI matrixes, 2,5-dihydroxybenzoic acid (DHB) and the novel 7-hydroxy-4-(trifluoromethyl)coumarin (HFMC) showed the broadest application ranges for the antiretroviral drugs. For DHB, the mean relative errors ranged from 8.3 (ritonavir) to 4.3% (saquinavir). The mean precisions (CV) ranged from 17.3 (nevirapine) to 10.8% (saquinavir). The obtained lower limits of quantitation (LLOQ) readily allow clinical applications using just 1 million PBMC from HIV-infected patients under therapy. The new matrix HFMC was used for quantitative analysis of the HIV protease inhibitor indinavir using a stainless steel target plate as well as a target plate with a novel, strongly hydrophobic fluoropolymer coating. Using the coated target plate, the mean relative error improved from 10.1 to 4.6%, the mean precision from 33.9 to 9.9% CV, and the LLOQ from 16 to 1 fmol. In addition, the measurement time for one spot went down from 6 to only 2.5 s.

Quantitative analysis of small molecules by desorption electrospray ionization mass spectrometry from polytetrafluoroethylene surfaces

Desorption electrospray ionization mass spectrometry (DESI-MS) is an emerging technique for ambient analysis. However, its application to routine quantitation has not been explored extensively and this is undertaken here. We present studies that utilize a particularly suitable surface, porous polytetrafluoroethylene (porous PTFE), which shows less cross contamination between samples and improved sensitivity and signal stability compared to other surfaces. Quantitative experiments for 1 microL spotted solutions of the beta-blocker propranolol, using isotopically labeled propranolol as internal standard, showed a good linear correlation (r2 > 0.996) over the range 0.01-100 microM. The inter-day precision, based on the relative standard deviation, for replicates analyzed on three different days was 13% for 0.01 microM and better than 7% for the remainder of the calibration points. The inter-day accuracy, expressed as relative error, was better than +/-7% for all calibration points along the curve. These day-to-day measurements suggest that DESI-MS can be successfully employed for routine quantitative analysis. The use of the analog atenolol as an internal standard and further considerations that should improve quantitation by DESI-MS are also presented.

Rapid Screening of Doping Agents in Human Urine by Vacuum MALDI-Linear Ion Trap Mass Spectrometry

Detection of doping agents in urine frequently requires extensive separation prior to chemical analyses. Gas or liquid chromatography coupled to mass spectrometry has produced accurate and sensitive assays, but chromatographic separations require time and, sometimes, chemical derivatization. To avoid such tedious and lengthy procedures, vacuum matrix-assisted laser desorption ionization (vMALDI) coupled with the linear ion trap mass spectrometry (LIT/MS) technique is tested for its applicability as a rapid screening technique. Commonly used doping agents like nandrolone, boldenone, trenbolone, testosterone, and betamethasone were chosen as study compounds. Different MALDI matrixes like alpha-cyano-4-hydroxycinnamic acid (CHCA), dihyroxy benzoic acid (DHB) with and without cetyl trimethyl ammonium bromide (CTAB), a surfactant, and meso-tetrakis(pentafluorophenyl) porphyrin (F20TPP) were tested. Among them, F20TPP (MW 974.57 Da) was selected as the preferred matrix owing to the lack of interfering matrix peaks at the lower mass range (m/z 100-700). Urine samples spiked with study compounds were processed by solid-phase extraction (SPE) and consistently detected through a linear range of 0.1-100 ng/mL. The limit of detection and lower limit of quantification for all five analytes have been determined to be 0.03 and 0.1 ng/mL, respectively, in urine samples. Testosterone-d3 was used as an internal standard, and the quantitative measurements were achieved by the selective reaction monitoring (SRM) mode. The method was validated and showed consistency in the results. Hence, vMALDI-LIT/MS can be used as a rapid screening method to complement the traditional GC/MS and LC/MS techniques for simultaneous identification, confirmation, and quantification of doping agents in urine.

Assessment of metastable atom bombardment (MAB) ionization mass spectrometry for the fast determination of heterocyclic aromatic amines in cooked meat

An investigation of metastable atom bombardment (MAB) ionization mass spectrometry for the fast characterization of mutagenic/carcinogenic heterocyclic aromatic amines (HAAs) formed during heating processes of meats is presented. The aim of our study was to use the selective ionization of MAB to develop a detection method for HAAs in non-purified meat extracts, thus avoiding purification and concentration steps and reducing analysis time. Sample introduction into the MAB ion source was achieved by pyrolysis, allowing the direct and fast insertion of complex food extracts into the mass spectrometer. Analysis conditions were optimized on standard HAAs by using different ionization gases for the MAB process. Metastable nitrogen was selected as the best MAB gas for the analysis of HAAs. Ionization selectivity is shown by the detection of heterocyclic amines in non-purified chicken meat extracts spiked with HAAs. A quantitative approach is also presented by using pyrograms as chromatograms for quantification purposes. HAAs determination using Py-MAB-ToF was finally performed on cooked chicken breast extracts and compared to an LC-APCI-MS/MS method. Although Py-MAB-ToF sensitivity remains to be improved in the present state of development of our prototype device, only 2 h from the cooking were required to obtain quantitative results in good agreement with HAAs concentrations measured by LC-MS/MS in 36 h. Figure Experimental set-up for pyrolysis-MAB-ToF mass spectrometry experiments.