Identification of the interface of a large protein-protein complex using H/D exchange and Fourier transform ion cyclotron resonance mass spectrometry

Structural Characterization of Monoclonal Antibodies and Epitope Mapping by FFAP Footprinting

Covalent labeling in combination with mass spectrometry is a powerful approach used in structural biology to study protein structures, interactions, and dynamics. Recently, the toolbox of covalent labeling techniques has been expanded with fast fluoroalkylation of proteins (FFAP). FFAP is a novel radical labeling method that utilizes fluoroalkyl radicals generated from hypervalent Togni reagents for targeting aromatic residues. This report further demonstrates the benefits of FFAP as a new method for structural characterization of therapeutic antibodies and interaction interfaces of antigen-antibody complexes. The results obtained from human trastuzumab and its complex with human epidermal growth factor receptor 2 (HER2) correlate well with previously published structural data and demonstrate the potential of FFAP in structural biology.

Hydrogen Deuterium Exchange and other Mass Spectrometry-based Approaches for Epitope Mapping

Antigen-antibody interactions are a fundamental subset of protein-protein interactions responsible for the "survival of the fittest". Determining the interacting interface of the antigen, called an epitope, and that on the antibody, called a paratope, is crucial to antibody development. Because each antigen presents multiple epitopes (unique footprints), sophisticated approaches are required to determine the target region for a given antibody. Although X-ray crystallography, Cryo-EM, and nuclear magnetic resonance can provide atomic details of an epitope, they are often laborious, poor in throughput, and insensitive. Mass spectrometry-based approaches offer rapid turnaround, intermediate structural resolution, and virtually no size limit for the antigen, making them a vital approach for epitope mapping. In this review, we describe in detail the principles of hydrogen deuterium exchange mass spectrometry in application to epitope mapping. We also show that a combination of MS-based approaches can assist or complement epitope mapping and push the limit of structural resolution to the residue level. We describe in detail the MS methods used in epitope mapping, provide our perspective about the approaches, and focus on elucidating the role that HDX-MS is playing now and in the future by organizing a discussion centered around several improvements in prototype instrument/applications used for epitope mapping. At the end, we provide a tabular summary of the current literature on HDX-MS-based epitope mapping.

Research advances in hydrogen-deuterium exchange mass spectrometry for protein epitope mapping

With the development of biomedical technology, epitope mapping of proteins has become critical for developing and evaluating new protein drugs. The application of hydrogen-deuterium exchange for protein epitope mapping holds great potential. Although several reviews addressed the hydrogen-deuterium exchange, to date, only a few systematic reviews have focused on epitope mapping using this technology. Here, we introduce the basic principles, development history, and review research progress in hydrogen-deuterium exchange epitope mapping technology and discuss its advantages. We summarize the main hurdles in applying hydrogen-deuterium exchange epitope mapping technology, combined with relevant examples to provide specific solutions. We describe the epitope mapping of virus assemblies, disease-associated proteins, and polyclonal antibodies as examples of pattern introduction. Finally, we discuss the outlook of hydrogen-deuterium exchange epitope mapping technology. This review will help researchers studying protein epitopes to gain a more comprehensive understanding of this technology.

A new paradigm in sweat based wearable diagnostics biosensors using Room Temperature Ionic Liquids (RTILs)

Successful commercialization of wearable diagnostic sensors necessitates stability in detection of analytes over prolonged and continuous exposure to sweat. Challenges are primarily in ensuring target disease specific small analytes (i.e. metabolites, proteins, etc.) stability in complex sweat buffer with varying pH levels and composition over time. We present a facile approach to address these challenges using RTILs with antibody functionalized sensors on nanoporous, flexible polymer membranes. Temporal studies were performed using both infrared spectroscopic, dynamic light scattering, and impedimetric spectroscopy to demonstrate stability in detection of analytes, Interleukin-6 (IL-6) and Cortisol, from human sweat in RTILs. Temporal stability in sensor performance was performed as follows: (a) detection of target analytes after 0, 24, 48, 96, and 168 hours post-antibody sensor functionalization; and (b) continuous detection of target analytes post-antibody sensor functionalization. Limit of detection of IL-6 in human sweat was 0.2 pg/mL for 0-24 hours and 2 pg/mL for 24-48 hours post-antibody sensor functionalization. Continuous detection of IL-6 over 0.2-200 pg/mL in human sweat was demonstrated for a period of 10 hours post-antibody sensor functionalization. Furthermore, combinatorial detection of IL-6 and Cortisol in human sweat was established with minimal cross-talk for 0-48 hours post-antibody sensor functionalization.

Mapping of Fab-1:VEGF Interface Using Carboxyl Group Footprinting Mass Spectrometry

A proof-of-concept study was performed to demonstrate that carboxyl group footprinting, a relatively simple, bench-top method, has utility for first-pass analysis to determine epitope regions of therapeutic mAb:antigen complexes. The binding interface of vascular endothelial growth factor (VEGF) and the Fab portion of a neutralizing antibody (Fab-1) was analyzed using carboxyl group footprinting with glycine ethyl ester (GEE) labeling. Tryptic peptides involved in the binding interface between VEGF and Fab-1 were identified by determining the specific GEE-labeled residues that exhibited a reduction in the rate of labeling after complex formation. A significant reduction in the rate of GEE labeling was observed for E93 in the VEGF tryptic peptide V5, and D28 and E57 in the Fab-1 tryptic peptides HC2 and HC4, respectively. Results from the carboxyl group footprinting were compared with the binding interface identified from a previously characterized crystal structure (PDB: 1BJ1). All of these residues are located at the Fab-1:VEGF interface according to the crystal structure, demonstrating the potential utility of carboxyl group footprinting with GEE labeling for mapping epitopes. Graphical Abstract ᅟ.

Fast photochemical oxidation of proteins (FPOP) maps the epitope of EGFR binding to adnectin

Epitope mapping is an important tool for the development of monoclonal antibodies, mAbs, as therapeutic drugs. Recently, a class of therapeutic mAb alternatives, adnectins, has been developed as targeted biologics. They are derived from the 10th type III domain of human fibronectin ((10)Fn3). A common approach to map the epitope binding of these therapeutic proteins to their binding partners is X-ray crystallography. Although the crystal structure is known for Adnectin 1 binding to human epidermal growth factor receptor (EGFR), we seek to determine complementary binding in solution and to test the efficacy of footprinting for this purpose. As a relatively new tool in structural biology and complementary to X-ray crystallography, protein footprinting coupled with mass spectrometry is promising for protein-protein interaction studies. We report here the use of fast photochemical oxidation of proteins (FPOP) coupled with MS to map the epitope of EGFR-Adnectin 1 at both the peptide and amino-acid residue levels. The data correlate well with the previously determined epitopes from the crystal structure and are consistent with HDX MS data, which are presented in an accompanying paper. The FPOP-determined binding interface involves various amino-acid and peptide regions near the N terminus of EGFR. The outcome adds credibility to oxidative labeling by FPOP for epitope mapping and motivates more applications in the therapeutic protein area as a stand-alone method or in conjunction with X-ray crystallography, NMR, site-directed mutagenesis, and other orthogonal methods.

Analyzing protein dynamics using hydrogen exchange mass spectrometry

All cellular processes depend on the functionality of proteins. Although the functionality of a given protein is the direct consequence of its unique amino acid sequence, it is only realized by the folding of the polypeptide chain into a single defined three-dimensional arrangement or more commonly into an ensemble of interconverting conformations. Investigating the connection between protein conformation and its function is therefore essential for a complete understanding of how proteins are able to fulfill their great variety of tasks. One possibility to study conformational changes a protein undergoes while progressing through its functional cycle is hydrogen-(1)H/(2)H-exchange in combination with high-resolution mass spectrometry (HX-MS). HX-MS is a versatile and robust method that adds a new dimension to structural information obtained by e.g. crystallography. It is used to study protein folding and unfolding, binding of small molecule ligands, protein-protein interactions, conformational changes linked to enzyme catalysis, and allostery. In addition, HX-MS is often used when the amount of protein is very limited or crystallization of the protein is not feasible. Here we provide a general protocol for studying protein dynamics with HX-MS and describe as an example how to reveal the interaction interface of two proteins in a complex.

High-resolution MS for structural characterization of protein therapeutics: advances and future directions

High-resolution MS (HRMS) is a central analytical technique for the study of biomolecules and is widely used in the biopharmaceutical industry. This paper reviews recent advances in commonly used HRMS instrumentation and experimental strategies for HRMS-based structural characterization of protein therapeutics. An overview of protein higher order structural characterization using HRMS-based technologies is presented, including the use of hydrogen/deuterium exchange and hydroxyl radical footprinting methods for probing protein conformational dynamics and interactions in solution. Future directions in application of HRMS for characterizing protein therapeutics are also described.

Epitope-distal effects accompany the binding of two distinct antibodies to hepatitis B virus capsids

Infection of humans by hepatitis B virus (HBV) induces the copious production of antibodies directed against the capsid protein (Cp). A large variety of anticapsid antibodies have been identified that differ in their epitopes. These data, and the status of the capsid as a major clinical antigen, motivate studies to achieve a more detailed understanding of their interactions. In this study, we focused on the Fab fragments of two monoclonal antibodies, E1 and 3120. E1 has been shown to bind to the side of outward-protruding spikes whereas 3120 binds to the "floor" region of the capsid, between spikes. We used hydrogen-deuterium exchange coupled to mass spectrometry (HDX-MS) to investigate the effects on HBV capsids of binding these antibodies. Conventionally, capsids loaded with saturating amounts of Fabs would be too massive to be readily amenable to HDX-MS. However, by focusing on the Cp protein, we were able to acquire deuterium uptake profiles covering the entire 149-residue sequence and reveal, in localized detail, changes in H/D exchange rates accompanying antibody binding. We find increased protection of the known E1 and 3120 epitopes on the capsid upon binding and show that regions distant from the epitopes are also affected. In particular, the α2a helix (residues 24-34) and the mobile C-terminus (residues 141-149) become substantially less solvent-exposed. Our data indicate that even at substoichiometric antibody binding an overall increase in the rigidity of the capsid is elicited, as well as a general dampening of its breathing motions.

Fast photochemical oxidation of proteins for epitope mapping

The growing use of monoclonal antibodies as therapeutics underscores the importance of epitope mapping as an essential step in characterizing antibody-antigen complexes. The use of protein footprinting coupled with mass spectrometry, which is emerging as a tool in structural biology, offers opportunities to map antibody-binding regions of antigens. We report here the use of footprinting via fast photochemical oxidation of proteins (FPOP) with OH radicals to characterize the epitope of the serine protease thrombin. The data correlate well with previously published results that determined the epitope of thrombin. This study marks the first time oxidative labeling has been used for epitope mapping.

Protein-peptide affinity determination using an h/d exchange dilution strategy: application to antigen-antibody interactions

A new methodology using hydrogen/deuterium amide exchange (HDX) to determine the binding affinity of protein-peptide interactions is reported. The method, based on our previously established approach, protein ligand interaction by mass spectrometry, titration, and H/D exchange (PLIMSTEX) [J. Am. Chem. Soc.2003, 125, 5252-5253], makes use of a dilution strategy (dPLIMSTEX) for HDX, using the mass of the peptide ligand as readout. We employed dPLIMSTEX to study the interaction of calcium-saturated calmodulin with the opioid peptide β-endorphin as a model system; the affinity results are in good agreement with those from traditional PLIMSTEX and with literature values obtained by using other methods. We show that the dPLIMSTEX method is feasible to quantify an antigen-antibody interaction involving a 3-nitrotyrosine modified peptide in complex with a monoclonal anti-nitrotyrosine antibody. A dissociation constant in the low nanomolar range was determined, and a binding stoichiometry of antibody/peptide of 1:2 was confirmed. In addition, we determined that the epitope in the binding interface contains a minimum of five amino acids. The dPLIMSTEX approach is a sensitive and powerful tool for the quantitative determination of peptide affinities with antibodies, complementary to conventional immuno-analytical techniques.

Probing the structure and activity of trypsin with amidination

Trypsin reacts with S-methylisothiourea for 1 to 2 h and the number of primary amine sites at which covalent labeling occurs is determined by mass spectrometry. By digesting the amidinated trypsin and mass analyzing the proteolytic peptides the sites of reaction are determined. The addition of cytochrome c to a solution of amidinated trypsin enables the proteolytic activity and autolytic properties of the enzyme to be studied.

Investigation of molecular interaction within biological macromolecular complexes by mass spectrometry

The advent of electrospray ionization (ESI) and matrix-assisted laser desorption ionization (MALDI) has accelerated structural studies of biological macromolecular complexes. At present, mass spectrometry can provide accurate mass values not only of individual biological macromolecules but also of their assemblies. Furthermore, it can also give information on the interface sites of the biological macromolecular complexes. The present article focuses on the role of mass spectrometry in the investigation of biological molecular interactions, such as protein-protein, protein-DNA, and protein-ligand interactions, which play essential roles in various biological events.

Determination of protein-derived epitopes by mass spectrometry

Mass spectrometry has evolved as a technique suitable for the characterization of peptides and proteins beyond their linear sequence. The advantages of mass spectrometric sample analysis are high sensitivity, high mass accuracy, rapid analysis time and low sample consumption. In epitope mapping, the molecular structure of an antigen (the epitope or antigenic determinant) that interacts with the paratope (recognition surface) of the antibody is identified. To obtain information on linear, conformational and/or discontinuous epitopes, various approaches have been developed in conjunction with mass spectrometry. These methods include limited proteolysis and epitope footprinting, epitope excision and epitope extraction for linear epitopes and probing the surface accessibility of residues by differential chemical modifications of specific amino acid side chains or by differential hydrogen/deuterium exchange of the protein backbone amides for conformational and discontinuous epitopes. Epitope mapping by mass spectrometry is applicable in basic biochemical research and, with increasing robustness, should soon find its implementation in routine clinical diagnosis.

Solution-phase deuterium/hydrogen exchange at a specific residue using nozzle-skimmer and electron capture dissociation mass spectrometry

Information about protein conformation can be obtained with hydrogen/deuterium exchange (HDX) mass spectrometry. The isotopic solution-phase exchange of specific amide hydrogen atoms can be followed using low-vacuum nozzle-skimmer collision-induced dissociation (CID). In this study, the nozzle-skimmer technique was complemented by electron capture dissociation (ECD) Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS). The solution-phase exchange at a specific residue is monitored by comparing isotopic distributions of two consecutive b- or c-type ions. While nozzle-skimmer fragmentation takes place in the low-vacuum region of the mass spectrometer, ECD occurs at ultra-high vacuum within the mass analyzer cell of the FTICR mass spectrometer. The dissociations take place at 10(-4) and 10(-9) mbar, respectively. Low-vacuum nozzle-skimmer fragmentation can result in intramolecular exchange between product ions and solvent molecules in the gas phase. Consequently, the solution-phase information about protein or peptide conformation is lost. It was not possible to monitor isotopic solution-phase exchange at the eighth residue in substance P, (Phe)8, with nozzle-skimmer CID. By using the in-cell ECD fragmentation method, the solution-phase exchange at the (Phe)8 residue was preserved during mass spectrometric analysis. This result shows the complementary aspects of applying fragmentation at low and at high vacuum, when studying isotopic exchange in solution at specific residues using FTICRMS.

Effective novel dissociation methods for intact protein: Heat-assisted nozzle-skimmer collisionally induced dissociation and infrared multiphoton dissociation using a Fourier transform ion cyclotron resonance mass spectrometer equipped with a micrometal electrospray ionization emitter

Heating of a nano-electrospray ionization (nanoESI) source can improve the dissociation efficiency of collisionally induced dissociation (CID) methods, such as nozzle-skimmer CID (NS-CID) and infrared multiphoton dissociation (IRMPD), for large biomolecule fragmentation. A metal nanoESI emitter was used due to its resistance to heating above 250 degrees C. This novel method for the dissociation of large biomolecular ions is termed "heat-assisted NS-CID" (HANS-CID) or "heat-assisted IRMPD" (HA-IRMPD). Multiple charged nonreduced protein ions (8.6 Da ubiquitin, 14 kDa lysozyme, and 67 kDa bovine serum albumin) were directly dissociated by HANS-CID and HA-IRMPD to effectively yield fragment ions that could be assigned. The fragment ions of ubiquitin by HANS-CID can be analyzed by tandem mass spectrometry (MS/MS) using sustained off-resonance irradiation CID (SORI-CID) and IRMPD. In addition, a native large protein, immunoglobulin G (IgG, 150 kDa), was efficiently dissociated by HA-IRMPD. The product ions that were obtained reflected the domain structure of IgG. However, these product ions of IgG and lysozyme were not dissociated by MS/MS using the same heating energetic methods such as IRMPD and SORI-CID.

Collisional activation by MALDI tandem time-of-flight mass spectrometry induces intramolecular migration of amide hydrogens in protonated peptides

Considerable controversy exists in the literature as to the occurrence of intramolecular migration of amide hydrogens upon collisional activation of protonated peptides and proteins. This phenomenon has important implications for the application of CID as an experimental tool to obtain site-specific information about the incorporation of deuterium into peptides and proteins in solution. Using a unique set of peptides with their carboxyl-terminal half labeled with deuterium we have shown unambiguously that hydrogen (1H/2H) scrambling is such a dominating factor during low energy collisional activation of doubly protonated peptides that the original regioselective deuterium pattern of these peptides is completely erased (Jørgensen, T. J. D., Gårdsvoll, H., Ploug, M., and Roepstorff, P. (2005) Intramolecular migration of amide hydrogens in protonated peptides upon collisional activation. J. Am. Chem. Soc.127, 2785-2793). Taking further advantage of this unique test system we have now investigated the influence of the charge state and collision energy on the occurrence of scrambling in protonated peptides. Our MALDI tandem time-of-flight experiments clearly demonstrate that complete positional randomization among all exchangeable sites (i.e. all N- and O-linked hydrogens) also occurs upon high energy collisional activation of singly protonated peptides. This intense proton/deuteron traffic precludes the use of MALDI tandem time-of-flight mass spectrometry to obtain reliable information on the specific incorporation pattern of deuterons obtained during exchange experiments in solution.

Capsid structure and dynamics of a human rhinovirus probed by hydrogen exchange mass spectrometry

Viral capsids are dynamic protein assemblies surrounding viral genomes. Despite the high-resolution structures determined by X-ray crystallography and cryo-electron microscopy, their in-solution structure and dynamics can be probed by hydrogen exchange. We report here using hydrogen exchange combined with protein enzymatic fragmentation and mass spectrometry to determine the capsid structure and dynamics of a human rhinovirus, HRV14. Capsid proteins (VP1-4) were labeled with deuterium by incubating intact virus in D(2)O buffer at neutral pH. The labeled proteins were digested by immobilized pepsin to give peptides analyzed by capillary reverse-phase HPLC coupled with nano-electrospray mass spectrometry. Deuterium levels incorporated at amide linkages in peptic fragments were measured for different exchange times from 12 sec to 30 h to assess the amide hydrogen exchange rates along each of the four protein backbones. Exchange results generally agree with the crystal structure of VP1-4,with extended, flexible terminal and surface-loop regions in fast exchange and folded helical and sheet structures in slow exchange. In addition, three alpha-helices, one from each of VP1-3, exhibited very slow exchange, indicating high stability of the protomeric interface. The beta-strands at VP3 N terminus also had very slow exchange, suggesting stable pentamer contacts. It was noted, however, that the interface around the fivefold axis had fast and intermediate exchange, indicating relatively more flexibility. Even faster exchange rates were found in the N terminus of VP1 and most segments of VP4, suggesting high flexibilities, which may correspond to their potential roles in virus uncoating.

Activation of large ions in FT-ICR mass spectrometry

The advent of soft ionization techniques, notably electrospray and laser desorption ionization methods, has enabled the extension of mass spectrometric methods to large molecules and molecular complexes. This both greatly extends the applications of mass spectrometry and makes the activation and dissociation of complex ions an integral part of these applications. This review emphasizes the most promising methods for activation and dissociation of complex ions and presents this discussion in the context of general knowledge of reaction kinetics and dynamics largely established for small ions. We then introduce the characteristic differences associated with the higher number of internal degrees of freedom and high density of states associated with molecular complexity. This is reflected primarily in the kinetics of unimolecular dissociation of complex ions, particularly their slow decay and the higher energy content required to induce decomposition--the kinetic shift (KS). The longer trapping time of Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) significantly reduces the KS, which presents several advantages over other methods for the investigation of dissociation of complex molecules. After discussing general principles of reaction dynamics related to collisional activation of ions, we describe conventional ways to achieve single- and multiple-collision activation in FT-ICR MS. Sustained off-resonance irradiation (SORI)--the simplest and most robust means of introducing the multiple collision activation process--is discussed in greatest detail. Details of implementation of this technique, required control of experimental parameters, limitations, and examples of very successful application of SORI-CID are described. The advantages of high mass resolving power and the ability to carry out several stages of mass selection and activation intrinsic to FT-ICR MS are demonstrated in several examples. Photodissociation of ions from small molecules can be effected using IR or UV/vis lasers and generally requires tuning lasers to specific wavelengths and/or utilizing high flux, multiphoton excitation to match energy levels in the ion. Photodissociation of complex ions is much easier to accomplish from the basic physics perspective. The quasi-continuum of vibrational states at room temperature makes it very easy to pump relatively large amounts of energy into complex ions and infrared multiphoton dissociation (IRMPD) is a powerful technique for characterizing large ions, particularly biologically relevant molecules. Since both SORI-CID and IRMPD are slow activation methods they have many common characteristics. They are also distinctly different because SORI-CID is intrinsically selective (only ions that have a cyclotron frequency close to the frequency of the excitation field are excited), whereas IRMPD is not (all ions that reside on the optical path of the laser are excited). There are advantages and disadvantages to each technique and in many applications they complement each other. In contrast with these slow activation methods, the less widely appreciated activation method of surface induced dissociation (SID) appears to offer unique advantages because excitation in SID occurs on a sub-picosecond time scale, instantaneously relative to the observation time of any mass spectrometer. Internal energy deposition is quite efficient and readily adjusted by altering the kinetic energy of the impacting ion. The shattering transition--instantaneous decomposition of the ion on the surface--observed at high collision energies enables access to dissociation channels that are not accessible using SORI-CID or IRMPD. Finally, we discuss some approaches for tailoring the surface to achieve particular aims in SID.

Proteomics by FTICR mass spectrometry: top down and bottom up

This review provides a broad overview of recent Fourier transform ion cyclotron resonance (FTICR) applications and technological developments relevant to the field of proteomics. Both the "bottom up" (peptide level) and "top down" (intact protein level) approaches are discussed and illustrated with examples. "Bottom up" topics include peptide fragmentation, the accurate mass and time (AMT) tag approach and dynamic range extension technology, aspects of quantitative proteomics measurements, post-translational modifications, and developments in FTICR operation software focused on peptide and protein identification. Topics related to the "top down" approach include various aspects of high mass measurements, protein tandem mass spectrometry, methods for the study of protein conformations, and protein complexes as well as advanced technologies that may become of practical utility in the coming years. Finally, early examples of the integration of both FTICR approaches to biomedical proteomics applications are presented, along with an outlook for future directions.

Protein analysis by hydrogen exchange mass spectrometry

Mass spectrometry has provided a powerful method for monitoring hydrogen exchange of protein backbone amides with deuterium from solvent. In comparison to popular NMR approaches, mass spectrometry has the advantages of higher sensitivity, wider coverage of sequence, and the ability to analyze larger proteins. Proteolytic fragmentation of proteins following the exchange reaction provides moderate structural resolution, in some cases enabling measurements from single amides. The technique has provided new insight into protein-protein and protein-ligand interfaces, as well as conformational changes during protein folding or denaturation. In addition, recent studies illustrate the utility of hydrogen exchange mass spectrometry toward detecting protein motions relevant to allostery, covalent modifications, and enzyme function.

Protein surface mapping by chemical oxidation: structural analysis by mass spectrometry

The solvent-accessible surface area of proteins is important in biological function for many reasons, including protein-protein interactions, protein folding, and catalytic sites. Here we present a chemical technique to oxidize amino acid side chains in a model protein, apomyoglobin, and subsequent elucidation of the effect of solvent accessibility on the sites of oxidation. Under conditions of low protein oxidation (zero to three oxygen atoms added per apomyoglobin molecule), we have positively identified five oxidation sites by liquid chromatography-tandem mass spectrometry and high-resolution Fourier transform mass spectrometry. Our results indicate that all oxidized amino acids, with the exception of methionine, have highly solvent-accessible side chains, but the rate of oxidation may not be dictated solely by solvent accessibility and amino acid identity.

Characterization of an antagonist interleukin-6 dimer by stable isotope labeling, cross-linking, and mass spectrometry

The homodimeric form of a recombinant cytokine interleukin-6 (IL-6(D)) is known to antagonize IL-6 signaling. In this study, spatially proximal residues between IL-6 chains in IL-6(D) were identified using a method for specific recognition of intermolecular cross-linked peptides. Our strategy involved mixing 1:1 (15)N-labeled and unlabeled ((14)N) protein to form a mixture of isotopically labeled and unlabeled homodimers, which was chemically cross-linked. This cross-linked IL-6(D) was subjected to proteolysis by trypsin and the generated peptides were analyzed by electrospray ionization time-of-flight mass spectrometry (MS). Molecular ions from cross-linked peptides of intermolecular origin are labeled with [(15)N/(15)N] + [(15)N/(14)N] + [(14)N/(15)N] + [(14)N/(14)N] yielding readily identified triplet/quadruplet MS peaks. All other peptide species are labeled with [(15)N] + [(14)N] yielding doublet peaks. Intermolecular cross-linked peptides were identified by MS, and cross-linked residues were identified. This intermolecular cross-link detection method, which we have designated "mixed isotope cross-linking" MIX may have more general application to protein-protein interaction studies. The pattern of proximal residues found was consistent with IL-6(D) having a domain-swapped fold similar to IL-10 and interferon-gamma. This fold implies that IL-6(D)-mediated antagonism of IL-6 signaling is caused by obstruction of cooperative gp130 binding on IL-6(D), rather than direct blocking of gp-130-binding sites on IL-6(D).

Crossing the phase boundary to study protein dynamics and function: combination of amide hydrogen exchange in solution and ion fragmentation in the gas phase

Protein dynamics are the key to understanding their behavior. The static protein structure alone in most cases is insufficient to describe the vast array of complex functions they perform in vivo. Until recently there were relatively few techniques available to investigate the dynamic nature of these proteins. Mass spectrometry has recently emerged as a powerful biophysical method, capable of providing both structural and dynamic information. By utilizing the labile nature of amide hydrogens as a marker of the backbone dynamics in solution, combined with gas-phase dissociation techniques, we now have a high-resolution tool to locate these exchanging hydrogens within the sequence of the protein and to probe the functional importance of its structural elements. In this paper we describe several applications of these methodologies to illustrate the importance of dynamics to the biological functions of proteins.

Studies of biomolecular conformations and conformational dynamics by mass spectrometry

In the post-genomic era, a wealth of structural information has been amassed for proteins from NMR and crystallography. However, static protein structures alone are not a sufficient description: knowledge of the dynamic nature of proteins is essential to understand their wide range of functions and behavior during the life cycle from synthesis to degradation. Furthermore, few proteins have the ability to act alone in the crowded cellular environment. Assemblies of multiple proteins governed by complex signaling pathways are often required for the tasks of target recognition, binding, transport, and function. Mass spectrometry has emerged over the past several years as a powerful tool to address many of these questions. Recent improvements in "soft" ionization techniques have enabled researchers to study proteins and biomolecular complexes, both directly and indirectly. Likewise, continuous improvements in instrumental design in recent years have resulted in a dramatic expansion of the m/z range and resolution, enabling observation of large multi-protein assemblies whose structures are retained in the gas phase. In this article, we discuss some of the mass spectrometric techniques applied to investigate the nature of the conformations and dynamical properties that govern protein function.