Real-time differentiation of ethylbenzene and the xylenes using selected ion flow tube mass spectrometry

Recent developments and applications of selected ion flow tube mass spectrometry (SIFT-MS)

Selected ion flow tube mass spectrometry (SIFT-MS) is now recognized as the most versatile analytical technique for the identification and quantification of trace gases down to the parts-per-trillion by volume, pptv, range. This statement is supported by the wide reach of its applications, from real-time analysis, obviating sample collection of very humid exhaled breath, to its adoption in industrial scenarios for air quality monitoring. This review touches on the recent extensions to the underpinning ion chemistry kinetics library and the alternative challenge of using nitrogen carrier gas instead of helium. The addition of reagent anions in the Voice200 series of SIFT-MS instruments has enhanced the analytical capability, thus allowing analyses of volatile trace compounds in humid air that cannot be analyzed using reagent cations alone, as clarified by outlining the anion chemistry involved. Case studies are reviewed of breath analysis and bacterial culture volatile organic compound (VOC), emissions, environmental applications such as air, water, and soil analysis, workplace safety such as transport container fumigants, airborne contamination in semiconductor fabrication, food flavor and spoilage, drugs contamination and VOC emissions from packaging to demonstrate the stated qualities and uniqueness of the new generation SIFT-MS instrumentation. Finally, some advancements that can be made to improve the analytical capability and reach of SIFT-MS are mentioned.

Instantaneous Differentiation of Functional Isomers via Reactive Flowing Atmospheric Pressure Afterglow Mass Spectrometry

Ambient mass spectrometry (AMS) allows direct desorption and ionization of analytes in real time with minimal-to-no sample preparation. However, it may present inadequate capabilities for differentiating isomers. Here, a reactive flowing atmospheric-pressure afterglow (reactive-FAPA) AMS source is developed for rapid isomer differentiation by derivatization of analytes in real time. The effects of the reactive-FAPA operating conditions on the reagent and product ions were studied and optimized for highly volatile and non-volatile model compounds with different carbonyl functional groups. In addition, two functional isomers of valproic acid (VPA) metabolites, 4-ene VPA and γ-valprolactone, are successfully differentiated for the first time by incorporating methylamine (MA) reagent vapor into the plasma effluent used for desorption/ionization. Reactive-FAPAMS for 4-ene VPA shows only detectable peaks of the protonated acylation product [M + MA-H₂O + H]⁺, while for γ-valprolactone, it shows detectable peaks for both protonated acylation product [M + MA-H₂O + H]⁺ and protonated intermediate [M + MA + H]⁺. A method for quantitative characterization of mixtures of 4-ene VPA and γ-valprolactone is also developed and validated. In addition, reactive-FAPAMS also shows better detection sensitivity compared to nonreactive-FAPAMS for some larger analyte types, such as UV filters and steroids. The limit of detection (LOD) of pregnenolone acetate in reactive-FAPAMS is 310 ng/mL, which is about 10 times better than its LOD in nonreactive-FAPA.

Understanding Gas Phase Ion Chemistry Is the Key to Reliable Selected Ion Flow Tube-Mass Spectrometry Analyses

Ion-molecule reactions (IMR) are at the very core of trace gas analyses in modern chemical ionization (CI) mass spectrometer instruments, which are increasingly being used in diverse areas of research and industry. The focus of this Perspective is on the ion chemistry that underpins gas-phase analytical CI methods. Special attention is given to the soft chemical ionization method known as selected ion flow tube-mass spectrometry (SIFT-MS). The processes involved in the ion chemistry of the reagent cations, H₃O⁺, NO⁺, and O₂^+•, and the anions, O^-•, O₂^-•, OH^-, and NO₂^-, are discussed in some detail. Stressed throughout is that an understanding of these processes is mandatory to obtain reliable analyses of humid gaseous media such as ambient air and exhaled breath. It is indicated that further research is needed to understand the consequences of replacing helium in some situations by the more readily available nitrogen as the carrier gas in SIFT-MS.

Direct Mass Spectrometry with Online Headspace Sample Pretreatment for Continuous Water Quality Monitoring

This study investigates the use of selected ion flow tube mass spectrometry with an automated headspace pretreatment system for the continuous surveillance of water quality at wastewater treatment plants (WWTPs) and rivers. The reaction rates of the target compounds introduced using the headspace method were similar to those of the mass scan library, with a margin of error of <10%. Novel quantitative formulae were derived for the water samples of the target compounds, and the linearity of the calibration curves for both the purified and effluent matrix (0.1–2.0 mg/L) showed a coefficient of determination of 0.98–0.99 for most compounds. The detection limit for 74% of the target substances was 0.02–0.10 mg/L, and the average recoveries were 111.6% and 104.7% for the low- and high-concentration spiked samples, respectively, which are comparable to those of the headspace gas chromatography-mass spectrometry system. However, the variability in individual concentrations was still large, due to the unstable control of sample injection flow and pressure. Herein, 79% of the 28 compounds met one-tenth of the proposed method detection limit criteria for emergency operations in WWTP. Field experiments showed that the system was easy to maintain and could be used to monitor chemical accidents.