Correlative light and backscattered electron microscopy of bone--Part I: Specimen preparation methods

Bone hierarchical organization through the lens of materials science: Present opportunities and future challenges

Multiscale characterization is essential to better understand the hierarchical architecture of bone and an array of analytical methods contributes to exploring the various structural and compositional aspects. Incorporating X-ray tomography, X-ray scattering, vibrational spectroscopy, and atom probe tomography alongside electron microscopy provides a comprehensive approach, offering insights into the diverse levels of organization within bone. X-ray scattering techniques reveal information about collagen-mineral spatial relationships, while X-ray tomography captures 3D structural details, especially at the microscale. Electron microscopy, such as scanning and transmission electron microscopy, extends resolution to the nanoscale, showcasing intricate features such as collagen fibril organization. Additionally, atom probe tomography achieves sub-nanoscale resolution and high chemical sensitivity, enabling detailed examination of bone composition. Despite various technical challenges, a correlative approach allows for a comprehensive understanding of bone material properties. Real-time investigations through in situ and in operando approaches shed light on the dynamic processes in bone. Recently developed techniques such as liquid, in situ transmission electron microscopy provide insights into calcium phosphate formation and collagen mineralization. Mechanical models developed in the effort to link structure, composition, and function currently remain oversimplified but can be improved. In conclusion, correlative analytical platforms provide a holistic perspective of bone extracellular matrix and are essential for unraveling the intricate interplay between structure and composition within bone.

Elemental composition of primary lamellar bone differs between parous and nulliparous rhesus macaque females

Extracting life history information from mineralized hard tissues of extant and extinct species is an ongoing challenge in evolutionary and conservation studies. Primary lamellar bone is a mineralized tissue with multidien periodicity that begins deposition prenatally and continues until adulthood albeit with concurrent resorption, thus maintaining a record spanning several years of an individual's life. Here, we use field-emission scanning electron microscopy and energy-dispersive X-ray analysis to measure the relative concentrations of calcium, phosphorous, oxygen, magnesium and sodium in the femora of seven rhesus macaque with known medical and life-history information. We find that the concentration of these elements distinguishes parous from nulliparous females; that in females calcium and phosphorus are lower in bone formed during reproductive events; and that significant differences in relative magnesium concentration correlate with breastfeeding in infants.

Collagen Fiber Orientation in Primate Long Bones

Studies of variation in orientation of collagen fibers within bone have lead to the proposition that these are preferentially aligned to accommodate different kinds of load, with tension best resisted by fibers aligned longitudinally relative to the load, and compression best resisted by transversely aligned fibers. However, previous studies have often neglected to consider the effect of developmental processes, including constraints on collagen fiber orientation (CFO), particularly in primary bone. Here we use circularly polarized light microscopy to examine patterns of CFO in cross-sections from the midshaft femur, humerus, tibia, radius, and ulna in a range of living primate taxa with varied body sizes, phylogenetic relationships and positional behaviors. We find that a preponderance of longitudinally oriented collagen is characteristic of both periosteal primary and intracortically remodeled bone. Where variation does occur among groups, it is not simply understood via interpretations of mechanical loads, although prioritized adaptations to tension and/or shear are considered. While there is some suggestion that CFO may correlate with body size, this relationship is neither consistent nor easily explicable through consideration of size-related changes in mechanical adaptation. The results of our study indicate that there is no clear relationship between CFO and phylogenetic status. One of the principle factors accounting for the range of variation that does exist is primary tissue type, where slower depositing bone is more likely to comprise a larger proportion of oblique to transverse collagen fibers. Anat Rec, 300:1189-1207, 2017. © 2017 Wiley Periodicals, Inc.

Bone regeneration in critical bone defects using three-dimensionally printed β-tricalcium phosphate/hydroxyapatite scaffolds is enhanced by coating scaffolds with either dipyridamole or BMP-2

Bone defects resulting from trauma or infection need timely and effective treatments to restore damaged bone. Using specialized three-dimensional (3D) printing technology we have created custom 3D scaffolds of hydroxyapatite (HA)/beta-tri-calcium phosphate (β-TCP) to promote bone repair. To further enhance bone regeneration we have coated the scaffolds with dipyridamole, an agent that increases local adenosine levels by blocking cellular uptake of adenosine. Nearly 15% HA:85% β-TCP scaffolds were designed using Robocad software, fabricated using a 3D Robocasting system, and sintered at 1100°C for 4 h. Scaffolds were coated with BMP-2 (200 ng mL^-1 ), dypiridamole 100 µM or saline and implanted in C57B6 and adenosine A2A receptor knockout (A2AKO) mice with 3 mm cranial critical bone defects for 2-8 weeks. Dipyridamole release from scaffold was assayed spectrophotometrically. MicroCT and histological analysis were performed. Micro-computed tomography (microCT) showed significant bone formation and remodeling in HA/β-TCP-dipyridamole and HA/β-TCP-BMP-2 scaffolds when compared to scaffolds immersed in vehicle at 2, 4, and 8 weeks (n = 5 per group; p ≤ 0.05, p ≤ 0.05, and p ≤ 0.01, respectively). Histological analysis showed increased bone formation and a trend toward increased remodeling in HA/β-TCP- dipyridamole and HA/β-TCP-BMP-2 scaffolds. Coating scaffolds with dipyridamole did not enhance bone regeneration in A2AKO mice. In conclusion, scaffolds printed with HA/β-TCP promote bone regeneration in critical bone defects and coating these scaffolds with agents that stimulate A2A receptors and growth factors can further enhance bone regeneration. These coated scaffolds may be very useful for treating critical bone defects due to trauma, infection or other causes. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 366-375, 2017.

Locomotor activity influences muscle architecture and bone growth but not muscle attachment site morphology

The ability to make behavioural inferences from skeletal remains is critical to understanding the lifestyles and activities of past human populations and extinct animals. Muscle attachment site (enthesis) morphology has long been assumed to reflect muscle strength and activity during life, but little experimental evidence exists to directly link activity patterns with muscle development and the morphology of their attachments to the skeleton. We used a mouse model to experimentally test how the level and type of activity influences forelimb muscle architecture of spinodeltoideus, acromiodeltoideus, and superficial pectoralis, bone growth rate and gross morphology of their insertion sites. Over an 11-week period, we collected data on activity levels in one control group and two experimental activity groups (running, climbing) of female wild-type mice. Our results show that both activity type and level increased bone growth rates influenced muscle architecture, including differences in potential muscular excursion (fibre length) and potential force production (physiological cross-sectional area). However, despite significant influences on muscle architecture and bone development, activity had no observable effect on enthesis morphology. These results suggest that the gross morphology of entheses is less reliable than internal bone structure for making inferences about an individual's past behaviour.

Correlative microscopy: a potent tool for the study of rare or unique cellular and tissue events

Biological studies have relied on two complementary microscope technologies - light (fluorescence) microscopy and electron microscopy. Light microscopy is used to study phenomena at a global scale to look for unique or rare events, and it also provides an opportunity for live imaging, whereas the forte of electron microscopy is the high resolution. Traditionally light and electron microscopy observations are carried out in different populations of cells/tissues and a 'correlative' inference is drawn. The advent of true correlative light-electron microscopy has allowed high-resolution imaging by electron microscopy of the same structure observed by light microscopy, and in advanced cases by video microscopy. Thus a rare event captured by low-resolution imaging of a population or transient events captured by live imaging can now also be studied at high resolution by electron microscopy. Here, the potential and difficulties of this approach, along with the most impressive breakthroughs obtained by these methods, are discussed.

Lamellar bone is an incremental tissue reconciling enamel rhythms, body size, and organismal life history

Mammalian enamel formation is periodic, including fluctuations attributable to the daily biological clock as well as longer-period oscillations that enigmatically correlate with body mass. Because the scaling of bone mass to body mass is an axiom of vertebrate hard tissue biology, we consider that long-period enamel formation rhythms may reflect corresponding and heretofore unrecognized rhythms in bone growth. The principal aim of this study is to seek a rhythm in bone growth demonstrably related to enamel oscillatory development. Our analytical approach is based in morphology, using a variety of hard tissue microscopy techniques. We first ascertain the relationship among long-period enamel rhythms, the striae of Retzius, and body mass using a large sample of mammalian taxa. In addition, we test whether osteocyte lacuna density (a surrogate for rates of cell proliferation) in bone is correlated with mammalian body mass. Finally, using fluorescently labeled developing bone tissues, we investigate whether the bone lamella, a fundamental microanatomical unit of bone, relates to rhythmic enamel growth increments. Our results confirm a positive correlation between long-period enamel rhythms and body mass and a negative correlation between osteocyte density and body mass. We also confirm that lamellar bone is an incremental tissue, one lamella formed in the species-specific time dependency of striae of Retzius formation. We conclude by contextualizing our morphological research with a current understanding of autonomic regulatory control of the skeleton and body mass, suggesting a central contribution to the coordination of organismal life history and body mass.

Confocal scanning optical microscopy of a 3-million-year-old Australopithecus afarensis femur

Portable confocal scanning optical microscopy (PCSOM) has been specifically developed for the noncontact and nondestructive imaging of early human fossil hard tissues, which here we describe and apply to a 3-million-year-old femur from the celebrated Ethiopian skeleton, "Lucy," referred to Australopithecus afarensis. We examine two bone tissue parameters that demonstrate the potential of this technology. First, subsurface reflection images from intact bone reveal bone cell spaces, the osteocyte lacunae, whose density is demonstrated to scale negatively with body size, reflecting aspects of metabolism and organismal life history. Second, images of a naturally fractured cross section near to Lucy's femoral mid-shaft, which match in sign those of transmitted circularly polarized light, reveal relative collagen fiber orientation patterns that are an important indicator of femoral biomechanical efficacy. Preliminary results indicate that Lucy was characterized by metabolic constraints typical for a primate her body size and that in her femur she was adapted to habitual bipedalism. Limitations imposed by the transport and invasive histology of unique or rare fossils motivated development of the PCSOM so that specimens may be examined wherever and whenever nondestructive imaging is required.

Regional variability in secondary remodeling within long bone cortices of catarrhine primates: the influence of bone growth history

Secondary intracortical remodeling of bone varies considerably among and within vertebrate skeletons. Although prior research has shed important light on its biomechanical significance, factors accounting for this variability remain poorly understood. We examined regional patterning of secondary osteonal bone in an ontogenetic series of wild-collected primates, at the midshaft femur and humerus of Chlorocebus (Cercopithecus) aethiops (n = 32) and Hylobates lar (n = 28), and the midshaft femur of Pan troglodytes (n = 12). Our major objectives were: 1) to determine whether secondary osteonal bone exhibits significant regional patterning across inner, mid-cortical and outer circumferential cortical rings within cross-sections; and if so, 2) to consider the manner in which this regional patterning may reflect the influence of relative tissue age and other circumstances of bone growth. Using same field-of-view images of 100-microm-thick cross-sections acquired in brightfield and circularly polarized light microscopy, we quantified the percent area of secondary osteonal bone (%HAV) for whole cross-sections and across the three circumferential rings within cross-sections. We expected bone areas with inner and middle rings to exhibit higher %HAV than the outer cortical ring within cross-sections, the latter comprising tissues of more recent depositional history. Observations of primary bone microstructural development provided an additional context in which to evaluate regional patterning of intracortical remodeling. Results demonstrated significant regional variability in %HAV within all skeletal sites. As predicted,%HAV was usually lowest in the outer cortical ring within cross-sections. However, regional patterning across inner vs. mid-cortical rings showed a more variable pattern across taxa, age classes, and skeletal sites examined. Observations of primary bone microstructure revealed that the distribution of endosteally deposited bone had an important influence on the patterning of secondary osteonal bone across rings. Further, when present, endosteal compacted coarse cancellous bone always exhibited some evidence of intracortical remodeling, even in those skeletal sites exhibiting comparatively low %HAV overall. These results suggest that future studies should consider the local developmental origin of bone regions undergoing secondary remodeling later in life, for an improved understanding of the manner in which developmental and mechanical factors may interact to produce the taxonomic and intraskeletal patterning of secondary bone remodelling in adults.

Relationships among microstructural properties of bone at the human midshaft femur

Mineralization density and collagen fibre orientation are two aspects of a bone's microstructural organization that influence its mechanical properties. Previous studies by our group have demonstrated a distinctly non-random, though highly variable, spatial distribution of these two variables in the human femoral cortex. In this study of 37 specimens, these variables are examined relative to one another in order to determine whether regions of bone demonstrating higher or lower mineralization density also demonstrate a prevalence of either transversely or longitudinally oriented collagen fibres. An analysis of rank-transformed collagen fibre orientation (as determined by circularly polarized light) and mineralization density (as determined by backscattered electron microscopy) data sets demonstrated that areas of low mineralization density (predominantly in the anterior-lateral cortex) tended to correspond to regions of higher proportions of longitudinally oriented collagen fibres. Conversely, areas of higher mineralization density (postero-medially) tended to correspond to regions of higher proportions of transversely oriented collagen fibres. High variability in the sample led to generally low correlations between the two data sets, however. A second analysis focused only on the orientation of collagen fibres within poorly mineralized bone (representing bone that was newly formed). This analysis demonstrated a lower proportion of transverse collagen fibres in newly formed bone with age, along with some significant regional differences in the prevalence of collagen fibres of either orientation. Again high variability characterized the sample. These results are discussed relative to the hypothesized forces experienced at the midshaft femur.

Circularly polarized light standards for investigations of collagen fiber orientation in bone

Bone exhibits positive form birefringence dominated by and dependent upon the orientation of its collagen. The biomechanical efficacy of bone as a tissue is largely determined by collagen fibers of preferred orientation and distribution (and corresponding orientation of mineral crystallites), and evidence is accumulating to demonstrate that this efficacy extends to function at the organ level. This study has three aims. The first is to provide a Background to the study of circularly polarized light (CPL) investigations of collagen fiber orientation in bone. The significance of preferred collagen fiber orientation in bone, linearly polarized light and CPL imaging principles, and a short history of CPL studies of mammalian functional histology are reviewed. The second is to describe, in some detail, methodological considerations relating to specimen preparation and imaging appropriate for the quantitative analysis of preferentially oriented collagen. These include section transparency, section thickness, the uniformity of the illuminating system, and CPL paraphernalia. Finally, we describe a grey-level standard useful for quantitative CPL, based upon mineralized turkey tendon, which shall be provided to investigators upon request. When due consideration is paid to specimen preparation and imaging conditions, quantitative assessment of collagen fiber orientation provides insight into the effects of mechanical loading on the skeleton.

Intrapopulation variability in mineralization density at the human femoral mid-shaft

One of several microstructural variables known to affect the mechanical properties of bone is the degree of mineralization of bone matrix. The aim of this study was to examine mineralization density, and its variability with age and sex, from a biomechanical perspective. Histological sections, prepared from mid-shaft femora obtained at autopsy from 40 individuals, were imaged using quantitative backscattered electron microscopy. Each cross-section montage was divided into 48 segments according to anatomical position. Mean grey-level values were quantified for each segment. One-way ANOVA with Tukey HSD post hoc tests were used to test for differences in mineralization between segments, age groups and sexes. Results showed a decrease in overall degree of mineralization density with adult age, but an increase in its coefficient of variation. Degree of mineralization was significantly lower in the periosteal third of the cortex, particularly in the antero-lateral aspect. This pattern was most prevalent amongst the youngest individuals in the sample. Whereas males between ages 45-64 years had a higher average degree of mineralization than females, the opposite was true of the older age group. Mineralization significantly decreased between middle and older age groups in males, but not in females. Despite limited consistencies in the location of high and low average mineralization bone through the cortex, the degree of interindividual variation, even within a single age and sex group, overwhelmed population level trends. The patterns of variability identified in this study are consistent with results of an analysis of collagen fibre orientation using the same sample material.

Preferred collagen fiber orientation in the human mid-shaft femur

Collagen fiber orientation is one aspect of the microstructure of bone that influences its mechanical properties. While the spatial distribution of preferentially oriented collagen is hypothesized to reflect the effects of loading during the process of aging, its variability in a modern human sample is essentially unknown. In a large sample (n = 67) of autopsied adults, the variability of collagen fiber orientation in the mid-shaft femur was examined in relation to age and sex. Montaged images of entire 100 microm thick cross-sections were obtained using circularly polarized light microscopy (CPLM) under standardized illuminating conditions. An automated image-analyzing routine divided images into 48 segments according to anatomical position. Average gray values (varying with orientation) were quantified for each segment, and one-way ANOVA with Tukey HSD post hoc tests were applied to assess differences between segments. Collagen fiber orientation appeared to be nonrandomly distributed across the mid-shaft femur sample; however, no single "human" pattern was identified. Individual variation, unexplainable by age, sex, or body size, exceeded population-level trends. Differences between age and sex groups suggest there is a strong correspondence between collagen fiber orientation and tissue-type distributions. The minimal consistencies demonstrated here may reflect mechanical forces induced at the femoral mid-shaft. However, the myriad of other factors that may influence collagen fiber orientation patterning, including growth trajectories, metabolic and nutritional status, and disease states, must be explored further. Only then, in conjunction with studies of other structural and material properties of bone, will we be able to elucidate the linkages between microstructure and functional adaptation in the human mid-shaft femur.

Histological thin-sections: a method for the microscopic study of teeth in Spanish red deer (Cervus elaphus hispanicus)

A method to obtain thin histological sections (4-5 microm thick) from teeth, using a conventional microtome, is described for incisors, molars and canines from Spanish red deer (Cervus elaphus hispanicus). Decalcifying solutions of formic acid and nitric acid at different concentrations were ineffective. This was not the case for a solution of 14% hypochloric acid and polyvinylpyrrolidone (TBD-1(R) of Shandon). However, the time needed to complete decalcification was longer than the time estimated by other authors. Incisors required between 4 and 6 days, molars between 7 and 15 days, and canines between 8 and 12 days. The preparation of histological thin-sections from teeth with a conventional microtome, required some training or prior specialization, because most of defective or lost material occurred during the preliminary stage of the study. However this technique is inexpensive enough to be implemented in any histological laboratory. The preparations obtained are suitable for growth mark observation in dentine and in cementum for dating studies. Nevertheless, they are not suitable for enamel change studies, because the enamel is completely destroyed during the decalcifying process.

Correlative light and backscattered electron microscopy of bone--part II: automated image analysis

Detailed studies of biological phenomena often involve multiple microscopy and imaging modes and media. For bone biology, various forms of light and electron microscopy are used to study the microscopic structure of bone. Integrating information from the different sources is necessary to understand how different aspects of the bone structure interact. To accomplish this, methods were developed to prepare and image thin sections for correlative light microscopy (LM) and backscattered electron imaging in the scanning electron microscope (BSE-SEM). Images of the same fields of view may then be analyzed for degrees of relationships between specimen features not observed by LM or SEM alone. These methods are applied here to study possible associations between the degree of bone mineralization and pattern of collagen fiber orientation in the mid-shaft of the human femur. The "relational images" obtained allow us to examine the relationship between these two variables, both objectively and quantitatively.