Human Fibrinogen for Maintenance and Differentiation of Induced Pluripotent Stem Cells in Two Dimensions and Three Dimensions

Detection of Residual iPSCs Following Differentiation of iPSC-Derived Retinal Pigment Epithelial Cells

Purpose: The goal of this study was to develop a lot release assay for iPSC residuals following directed differentiation of iPSCs to retinal pigment epithelial (RPE) cells. Methods: RNA Sequencing (RNA Seq) of iPSCs and RPE derived from them was used to identify pluripotency markers downregulated in RPE cells. Quantitative real time PCR (qPCR) was then applied to assess iPSC residuals in iPSC-derived RPE. The limit of detection (LOD) of the assay was determined by performing spike-in assays with known quantities of iPSCs serially diluted into an RPE suspension. Results: ZSCAN10 and LIN28A were among 8 pluripotency markers identified by RNA Seq as downregulated in RPE. Based on copy number and expression of pseudogenes and lncRNAs ZSCAN10 and LIN28A were chosen for use in qPCR assays for residual iPSCs. Reverse transcription PCR indicated generally uniform expression of ZSCAN10 and LIN28A in 21 clones derived from 8 iPSC donors with no expression of either in RPE cells derived from 5 donor lines. Based on qPCR, ZSCAN10, and LIN28A expression in iPSCs was generally uniform. The LOD for ZSCAN10 and LIN28A in qPCR assays was determined using spike in assays of RPE derived from 2 iPSC lines. Analysis of ΔΔCt found the limit of detection to be <0.01% of cells, equivalent to <1 iPSC/10,000 RPE cells in both iPSC lines. Conclusions: qPCR for ZSCAN10 and LIN28A detects <1 in 10,000 residual iPSCs in a population of iPSC-derived RPE providing an adequate LOD of iPSC residuals for lot release testing.

Matrices Activated with Messenger RNA

Over two decades of preclinical and clinical experience have confirmed that gene therapy-activated matrices are potent tools for sustained gene modulation at the implantation area. Matrices activated with messenger RNA (mRNA) are the latest development in the area, and they promise an ideal combination of efficiency and safety. Indeed, implanted mRNA-activated matrices allow a sustained delivery of mRNA and the continuous production of therapeutic proteins in situ. In addition, they are particularly interesting to generate proteins acting on intracellular targets, as the translated protein can directly exert its therapeutic function. Still, mRNA-activated matrices are incipient technologies with a limited number of published records, and much is still to be understood before their successful implementation. Indeed, the design parameters of mRNA-activated matrices are crucial for their performance, as they affect mRNA stability, device immunogenicity, translation efficiency, and the duration of the therapy. Critical design factors include matrix composition and its mesh size, mRNA chemical modification and sequence, and the characteristics of the nanocarriers used for mRNA delivery. This review aims to provide some background relevant to these technologies and to summarize both the design space for mRNA-activated matrices and the current knowledge regarding their pharmaceutical performance. Furthermore, we will discuss potential applications of mRNA-activated matrices, mainly focusing on tissue engineering and immunomodulation.

Spatiotemporal control of myofibroblast activation in acoustically-responsive scaffolds via ultrasound-induced matrix stiffening

Hydrogels are often used to study the impact of biomechanical and topographical cues on cell behavior. Conventional hydrogels are designed a priori, with characteristics that cannot be dynamically changed in an externally controlled, user-defined manner. We developed a composite hydrogel, termed an acoustically-responsive scaffold (ARS), that enables non-invasive, spatiotemporally controlled modulation of mechanical and morphological properties using focused ultrasound. An ARS consists of a phase-shift emulsion distributed in a fibrin matrix. Ultrasound non-thermally vaporizes the emulsion into bubbles, which induces localized, radial compaction and stiffening of the fibrin matrix. In this in vitro study, we investigate how this mechanism can control the differentiation of fibroblasts into myofibroblasts, a transition correlated with substrate stiffness on 2D substrates. Matrix compaction and stiffening was shown to be highly localized using confocal and atomic force microscopies, respectively. Myofibroblast phenotype, evaluated by α-smooth muscle actin (α-SMA) immunocytochemistry, significantly increased in matrix regions proximal to bubbles compared to distal regions, irrespective of the addition of exogenous transforming growth factor-β1 (TGF-β1). Introduction of the TGF-β1 receptor inhibitor SB431542 abrogated the proximal enhancement. This approach providing spatiotemporal control over biophysical signals and resulting cell behavior could aid in better understanding fibrotic disease progression and the development of therapeutic interventions for chronic wounds. STATEMENT OF SIGNIFICANCE: Hydrogels are used in cell culture to recapitulate both biochemical and biophysical aspects of the native extracellular matrix. Biophysical cues like stiffness can impact cell behavior. However, with conventional hydrogels, there is a limited ability to actively modulate stiffness after polymerization. We have developed an ultrasound-based method of spatiotemporally-controlling mechanical and morphological properties within a composite hydrogel, termed an acoustically-responsive scaffold (ARS). Upon exposure to ultrasound, bubbles are non-thermally generated within the fibrin matrix of an ARS, thereby locally compacting and stiffening the matrix. We demonstrate how ARSs control the differentiation of fibroblasts into myofibroblasts in 2D. This approach could assist with the study of fibrosis and the development of therapies for chronic wounds.

Hydrogels: A potential platform for induced pluripotent stem cell culture and differentiation

Induced pluripotent stem cells (iPSCs) can be used to generate desired types of cells that belong to the three germ layers (i.e., ectoderm, endoderm and mesoderm). These cells possess great potential in regenerative medicine. Before iPSCs are used in various biomedical applications, the existing xenogeneic culture methods must be improved to meet the technical standards of safety, cost effectiveness, and ease of handling. In addition to commonly used 2D substrates, a culture system that mimics the native cellular environment in tissues will be a good choice when culturing iPS cells and differentiating them into different lineages. Hydrogels are potential candidates that recapitulate the native complex three-dimensional microenvironment. They possess mechanical properties similar to those of many soft tissues. Moreover, hydrogels support iPSC adhesion, proliferation and differentiation to various cell types. They are xeno-free and cost-effective. In addition to other substrates, such as mouse embryonic fibroblast (MEF), Matrigel, and vitronectin, the use of hydrogel-based substrates for iPSC culture and differentiation may help generate large numbers of clinical-grade cells that can be used in potential clinical applications. This review mainly focuses on the use of hydrogels for the culture and differentiation of iPSCs into various cell types and their potential applications in regenerative medicine.

Cyclically stretched ACL fibroblasts emigrating from spheroids adapt their cytoskeleton and ligament-related expression profile

Mechanical stress of ligaments varies; hence, ligament fibroblasts must adapt their expression profile to novel mechanomilieus to ensure tissue resilience. Activation of the mechanoreceptors leads to a specific signal transduction, the so-called mechanotransduction. However, with regard to their natural three-dimensional (3D) microenvironment cell reaction to mechanical stimuli during emigrating from a 3D spheroid culture is still unclear. This study aims to provide a deeper understanding of the reaction profile of anterior cruciate ligament (ACL)-derived fibroblasts exposed to cyclic uniaxial strain in two-dimensional (2D) monolayer culture and during emigration from 3D spheroids with respect to cell survival, cell and cytoskeletal orientation, distribution, and expression profile. Monolayers and spheroids were cultured in crosslinked polydimethyl siloxane (PDMS) elastomeric chambers and uniaxially stretched (14% at 0.3 Hz) for 48 h. Cell vitality, their distribution, nuclear shape, stress fiber orientation, focal adhesions, proliferation, expression of ECM components such as sulfated glycosaminoglycans, collagen type I, decorin, tenascin C and cell-cell communication-related gap junctional connexin (CXN) 43, tendon-related markers Mohawk and tenomodulin (myodulin) were analyzed. In contrast to unstretched cells, stretched fibroblasts showed elongation of stress fibers, cell and cytoskeletal alignment perpendicular to strain direction, less rounded cell nuclei, increased numbers of focal adhesions, proliferation, amplified CXN43, and main ECM component expression in both cultures. The applied cyclic stretch protocol evoked an anabolic response and enhanced tendon-related marker expression in ACL-derived fibroblasts emigrating from 3D spheroids and seems also promising to support in future tissue formation in ACL scaffolds seeded in vitro with spheroids.

Increasing salinity of fibrinogen solvent generates stable fibrin hydrogels for cell delivery or tissue engineering

Fibrin has been used clinically for wound coverings, surgical glues, and cell delivery because of its affordability, cytocompatibility, and ability to modulate angiogenesis and inflammation. However, its rapid degradation rate has limited its usefulness as a scaffold for 3D cell culture and tissue engineering. Previous studies have sought to slow the degradation rate of fibrin with the addition of proteolysis inhibitors or synthetic crosslinkers that require multiple functionalization or polymerization steps. These strategies are difficult to implement in vivo and introduce increased complexity, both of which hinder the use of fibrin in research and medicine. Previously, we demonstrated that additional crosslinking of fibrin gels using bifunctionalized poly(ethylene glycol)-n-hydroxysuccinimide (PEG-NHS) slows the degradation rate of fibrin. In this study, we aimed to further improve the longevity of these PEG-fibrin gels such that they could be used for tissue engineering in vitro or in situ without the need for proteolysis inhibitors. It is well documented that increasing the salinity of fibrin precursor solutions affects the resulting gel morphology. Here, we investigated whether this altered morphology influences the fibrin degradation rate. Increasing the final sodium chloride (NaCl) concentration from 145 mM (physiologic level) to 250 mM resulted in fine, transparent high-salt (HS) fibrin gels that degrade 2–3 times slower than coarse, opaque physiologic-salt (PS) fibrin gels both in vitro (when treated with proteases and when seeded with amniotic fluid stem cells) and in vivo (when injected subcutaneously into mice). Increased salt concentrations did not affect the viability of encapsulated cells, the ability of encapsulated endothelial cells to form rudimentary capillary networks, or the ability of the gels to maintain induced pluripotent stem cells. Finally, when implanted subcutaneously, PS gels degraded completely within one week while HS gels remained stable and maintained viability of seeded dermal fibroblasts. To our knowledge, this is the simplest method reported for the fabrication of fibrin gels with tunable degradation properties and will be useful for implementing fibrin gels in a wide range of research and clinical applications.

Alteration of fibrin hydrogel gelation and degradation kinetics through addition of azo dyes

Fibrin is a degradable biopolymer with an excellent clinical safety profile. Use of higher mechanical strength fibrin hydrogels is limited by the rapid rate of fibrin polymerization. We recently demonstrated the use of higher mechanical strength (fibrinogen concentrations >30 mg/ml) fibrin scaffolds for surgical implantation of cells. The rapid polymerization of fibrin at fibrinogen concentrations impaired our ability to scale production of these fibrin scaffolds. We serendipitously discovered that the azo dye Trypan blue (TB) slowed fibrin gelation kinetics allowing for more uniform mixing of fibrinogen and thrombin at high concentrations. A screen of closely related compounds identified similar activity for Evans blue (EB), an isomer of TB. Both TB and EB exhibited a concentration dependent increase in clot time, though EB had a larger effect. While gelation time was increased by TB or EB, overall polymerization time was unaffected. Scanning electron microscopy showed similar surface topography, but transmission electron microscopy showed a higher cross-linking density for gels formed with TB or EB versus controls. Based on these data we conclude that addition of TB or EB during thrombin mediated fibrin polymerization slows the initial gelation time permitting generation of larger more uniform fibrin hydrogels with high-mechanical strength.

Transcript-Activated Coatings on Titanium Mediate Cellular Osteogenesis for Enhanced Osteointegration

Osteointegration is one of the most important factors for implant success. Several biomolecules have been used as part of drug delivery systems to improve implant integration into the surrounding bone tissue. Chemically modified mRNA (cmRNA) is a new form of therapeutic that has been used to induce bone healing. Combined with biomaterials, cmRNA can be used to develop transcript-activated matrices for local protein production with osteoinductive potential. In this study, we aimed to utilize this technology to create bone morphogenetic protein 2 (BMP2) transcript-activated coatings for titanium (Ti) implants. Therefore, different coating methodologies as well as cmRNA incorporation strategies were evaluated. Three different biocompatible biomaterials were used for the coating of Ti, namely, poly-d,l-lactic acid (PDLLA), fibrin, and fibrinogen. cmRNA-coated Ti disks were assayed for transfection efficiency, cmRNA release, cell viability and proliferation, and osteogenic activity in vitro. We found that cmRNA release was significantly delayed in Ti surfaces previously coated with biomaterials. Consequently, the transfection efficiency was greatly improved. PDLLA coating improved the transfection efficiency in a concentration-dependent manner. Lower PDLLA concentration used for the coating of Ti resulted in higher transfection efficiency. Fibrin and fibrinogen coatings showed even higher transfection efficiencies compared to all PDLLA concentrations. In those disks, not only the expression was up to 24-fold higher but also the peak of maximal expression was delayed from 24 h to 5 days, and the duration of expression was also extended until 7 days post-transfection. For fibrin, higher transfection efficiencies were obtained in the coatings with the lowest thrombin amounts. Accordingly, fibrinogen coatings gave the best results in terms of cmRNA transfection. All biomaterial-coated Ti surfaces showed improved cell viability and proliferation, though this was more noticeable in the fibrinogen-coated disks. The latter was also the only coating to support significant amounts of BMP2 produced by C2C12 cells in vitro. Osteogenesis was confirmed using BMP2 cmRNA fibrinogen-coated Ti disks, and it was dependent of the cmRNA amount present. Alkaline phosphatase (ALP) activity of C2C12 increased when using fibrinogen coatings containing 250 ng of cmRNA or more. Similarly, mineralization was also observed that increased with increasing cmRNA concentration. Overall, our results support fibrinogen as an optimal material to deliver cmRNA from titanium-coated surfaces.

Thalidomide Inhibits Human iPSC Mesendoderm Differentiation by Modulating CRBN-dependent Degradation of SALL4

Exposure to thalidomide during a critical window of development results in limb defects in humans and non-human primates while mice and rats are refractory to these effects. Thalidomide-induced teratogenicity is dependent on its binding to cereblon (CRBN), the substrate receptor of the Cul4A-DDB1-CRBN-RBX1 E3 ubiquitin ligase complex. Thalidomide binding to CRBN elicits subsequent ubiquitination and proteasomal degradation of CRBN neosubstrates including SALL4, a transcription factor of which polymorphisms phenocopy thalidomide-induced limb defects in humans. Herein, thalidomide-induced degradation of SALL4 was examined in human induced pluripotent stem cells (hiPSCs) that were differentiated either to lateral plate mesoderm (LPM)-like cells, the developmental ontology of the limb bud, or definitive endoderm. Thalidomide and its immunomodulatory drug (IMiD) analogs, lenalidomide, and pomalidomide, dose-dependently inhibited hiPSC mesendoderm differentiation. Thalidomide- and IMiD-induced SALL4 degradation can be abrogated by CRBN V388I mutation or SALL4 G416A mutation in hiPSCs. Genetically modified hiPSCs expressing CRBN E377V/V388I mutant or SALL4 G416A mutant were insensitive to the inhibitory effects of thalidomide, lenalidomide, and pomalidomide on LPM differentiation while retaining sensitivity to another known limb teratogen, all-trans retinoic acid (atRA). Finally, disruption of LPM differentiation by atRA or thalidomide perturbed subsequent chondrogenic differentiation in vitro. The data here show that thalidomide, lenalidomide, and pomalidomide affect stem cell mesendoderm differentiation through CRBN-mediated degradation of SALL4 and highlight the utility of the LPM differentiation model for studying the teratogenicity of new CRBN modulating agents.

Retinal pigment epithelium polarity in health and blinding diseases

The polarized phenotype of the retinal pigment epithelium is crucial for the outer retina-blood barrier and support of photoreceptors and underlying choroid, and its disruption plays a central role in degenerative retinopathies. Although the mechanisms of polarization remain mostly unknown, they are fundamental for homeostasis of the outer retina. Recent research is revealing a growing picture of interconnected tissues in the outer retina, with the retinal pigment epithelium at the center. This review discusses how elements of epithelial polarity relate to emerging apical interactions with the neural retina, basolateral cross-talk with the underlying Bruch's membrane and choriocapillaris, and tight junction biology. An integrated view of outer retina physiology is likely to provide insights into the pathogenesis of blinding diseases.