Triphenyl-Modified Mixed-Mode Stationary Phases With and Without Embedded Ion-Exchange Sites for High-Performance Liquid Chromatography

The present work reports on the preparation, characterization, and evaluation of a set of novel triphenyl-modified silica-based stationary phases without and with embedded ion-exchange sites for mixed-mode liquid chromatography. The three synthesized triphenyl phases differed in additionally incorporated ion-exchange sites. In one embodiment, allyltriphenylsilane was bonded to thiol-modified silica by thiol-ene click reaction, leading to particles with no ion-exchange sites. A second stationary phase was obtained by thiol-yne click reaction of thiol silica with 2-propinyl-triphenylphosphonium bromide, yielding a strong anion-exchanger (SAX). A third stationary phase was obtained from this SAX phase by the oxidation of residual thiols to sulfonic acid moieties, leading to a zwitterionic surface. All synthesized materials were subjected to elemental analysis, 13C and 29Si solid-state cross-polarization/magic angle spinning nuclear magnetic resonance (CP/MAS NMR) spectroscopy analysis, and pH-dependent ζ-potential determinations via electrophoretic light scattering. The prepared stationary phases were chromatographically evaluated under classical reversed-phase, ion-exchange, and hydrophilic interaction chromatography conditions and classified within a set of commercially available columns by principal component analysis of retention factors. Finally, the obtained stationary phases were applied for biomolecule separations (e.g., teicoplanin and siRNA patisiran). These LC tests proved the orthogonality of the three prepared stationary phases and indicated possible fields of application.

Mass spectrometry-based methods for the advanced characterization and structural analysis of lignin: A review

Lignin is currently one of the most promising biologically derived resources, due to its abundance and application in biofuels, materials and conversion to value aromatic chemicals. The need to better characterize and understand this complex biopolymer has led to the development of many different analytical approaches, several of which involve mass spectrometry and subsequent data analysis. This review surveys the most important analytical methods for lignin involving mass spectrometry, first looking at methods involving gas chromatography, liquid chromatography and then continuing with more contemporary methods such as matrix assisted laser desorption ionization and time-of-flight-secondary ion mass spectrometry. Following that will be techniques that directly ionize lignin mixtures-without chromatographic separation-using softer atmospheric ionization techniques that leave the lignin oligomers intact. Finally, ultra-high resolution mass analyzers such as FT-ICR have enabled lignin analysis without major sample preparation and chromatography steps. Concurrent with an increase in the resolution of mass spectrometers, there have been a wealth of complementary data analyses and visualization methods that have allowed researchers to probe deeper into the "lignome" than ever before. These approaches extract trends such as compound series and even important analytical information about lignin substructures without performing lignin degradation either chemically or during MS analysis. These innovative methods are paving the way for a more comprehensive understanding of this important biopolymer, as we seek more sustainable solutions for our human species' energy and materials needs.

Analysis of natural organic matter via fourier transform ion cyclotron resonance mass spectrometry: an overview of recent non-petroleum applications

Among the different techniques for mass analysis, ultra-high-resolution Fourier transform ion cyclotron resonance (FTICR) is the method of choice for highly complex samples, as it offers unrivaled mass accuracy and resolving power, combined with a high degree of flexibility in hybrid instruments as well as for ion activation techniques. FTICR instruments are readily embraced by the biological and biomedical research communities and applied over a wide range of applications for the analysis of biomolecules such as carbohydrates, lipids, nucleic acids, and proteins. In the field of natural organic matter (NOM) analysis, petroleum-related studies currently dominate FTICR-MS applications. Recently, however, there is a growing interest in developing high-performance MS methods for the characterization of NOM samples from natural aquatic and terrestrial environments. Here, we present an overview of FTICR-MS techniques for complex, non-petroleum NOM samples, including data analysis and novel tandem mass spectrometry (MS/MS) methods for structural classifications. © 2020 The Authors. Mass Spectrometry Reviews published by John Wiley & Sons Ltd.

Rapid mass spectral fingerprinting of complex mixtures of decomposed lignin: Data-processing methods for high-resolution full-scan mass spectra

Lignin is the second most abundant natural biopolymer and its wastes are significant sources for renewable chemicals as an alternative to conventional fossil fuels. Consequently, chemical characterization methods are required to assess the content of valuable chemicals contained in these complex lignin wastes. This short overview summarizes rapid data-processing methods developed in our laboratory for application to full-scan raw data from high-resolution mass spectrometry experiments of decomposed lignin samples. The discussed graphical and statistical methods support the initial classification and elucidation of the main structural features of the lignin components without the need for time-consuming tandem mass spectrometry analyses.

Recent advances in mixed-mode chromatographic stationary phases

Mixed-mode phases have become very popular in the last decade, and the number of new mixed/multi-mode sorbents is growing fast. Unlike single-mode stationary phases, perfectly suited for the separation of the analytes possessing similar physicochemical properties, for instance reversed-phase chromatography for hydrophobic solutes, mixed-mode sorbents providing multimodal interactions can render better separation selectivity for complex mixtures of solutes differing significantly in their physicochemical characteristics. The most frequent modern mixed-mode stationary phases are di/tri-mode sorbents embracing the following interactions, hydrophobic, electrostatic (coulombic), and hydrophilic. According to their structures, it is possible to distinguish silica-based, polymer-based, hybrid, and monolithic mixed-mode stationary phases. Herewith, newly synthesized mixed-mode sorbents developed within the last two and half years are categorized, discussed, and summarized. The main attention is devoted to the description of the synthetic routes and characterization methods applied for the new stationary phases.

Immobilization of a phosphonium ionic liquid on a silica monolith for hydrophilic interaction chromatography

A methodology for preparing phosphonium-based ionic liquid modified silica-based monolithic capillary columns is presented. The silica monolithic columns with dimensions of 150 × 0.1 mm were modified by a phosphonium-based ionic liquid (trioctyl(3/4-vinylbenzyl)phosphonium chloride) via 3-(trimethoxysilyl)propyl methacrylate. The prepared columns were evaluated under hydrophilic interaction liquid chromatography separation conditions, employing a sample mixture containing purine and pyrimidine bases and nucleosides. Detection was made by UV. The high efficiency of the original silica monolith was preserved even after modification, and it reached values in the range of 98,000-174,000 theoretical plates/m. The effects of the concentration of acetonitrile in the mobile phase, the presence of additives in the mobile phase, such as, acetic acid or ammonium acetate, and the pH of the mobile phase on the separation of some selected analytes were investigated. The prepared columns showed different separation selectivity compared to silica, phenyl and sulfobetaine stationary phases.

Electrochemical Lignin Degradation in Ionic Liquids on Ternary Mixed Metal Electrodes

Lignin is the second most abundant natural polymer and a promissing feedstock for the generation of renewable aromatic chemicals. We present an fundamental approach for the electrocatalytic cleavage of lignin dissolved in a recoverable, inexpensive ionic liquid using mixed metal oxide electrodes of different compositions. The distribution of depolymerization products generated by electrochemical oxidation were analyzed by means of mass spectrometry. The distribution and yield of the cracked species was found to depended strongly on the implemented metal catalyst and therefore offers the potential to tailor the amount and composition of the low molecular weight cleavage products. This approach could help to provide a more sustainable valorization of lignin for the potential production of high value aromatic compounds due to synergistic effects.