An Investigation on the Effect of Li–Ion Cycling on the Vertically Aligned Brookite TiO 2 Nanostructure

Sensitive, Stable, and Recyclable ZnO/Ag Nanohybrid Substrates for Surface-Enhanced Raman Scattering Metrology

Surface-enhanced Raman scattering is a practical, noninvasive spectroscopic technique that measures chemical fingerprints for varieties of molecules in multiple applications. However, synthesizing appropriate substrates for practical, long-term applications of this method has always been a challenging task. In the present study, we show that ZnO/Ag nanohybrid substrates may act as highly stable, sensitive, and recyclable substrates for surface-enhanced Raman scattering, as illustrated by the detection of methylene blue, selected as a test dye molecule with self-cleaning functionalities. Specifically, we demonstrate the detection enhancement factor of 3.7 × 107 along with exceptional long-term stability explained in terms of the localized surface plasmon resonance from the Ag nanocrystals embedded into the chemically inert ZnO nanoparticles, constituting the nanohybrid. Significantly, these substrates can be efficiently cleaned and regenerated while maintaining their high performance upon recycling. As a result, using these substrates, up to 10-12 M detection sensitivity has been demonstrated, enabling the accuracy required in modern environmental monitoring, bioassays, and analytical chemistry. Thus, ZnO nanoparticles with embedded Ag nanocrystals constitute a novel class of advanced nanohybrid substrates for use in multiple applications of surface-enhanced Raman scattering metrology.

Synergistic interface engineering in n-p-n type heterojunction Co3O4/MIL/Mn-STO with dual S-scheme multi-charge migration to enhance visible-light photocatalytic degradation of antibiotics

Constructing an effective multi-heterojunction photocatalyst with maximum charge carrier separation remains challenging. Herein, a high-efficient Co3O4/MIL-88A/Mn-SrTiO3 (Co3O4/MIL/Mn-STO) n-p-n heterojunction photocatalyst was successfully prepared by a simple hydrothermal method for the photodegradation of sulfamethoxazole (SMX). The combination of MIL and Co3O4/Mn-STO established an internal electric field and heterojunction, accelerating the separation of carriers, and thus improved photocatalytic performance. In the Co3O4/MIL/Mn-STO photocatalytic system, 95.5 % of SMX was degraded in 90 min. The photocatalytic kinetic removal rate of Co3O4/MIL/Mn-STO reached 0.0337 min-1, 8 times of Co3O4 (0.0041 min-1), 5.2 times of Mn-STO (0.0062 min-1), 4.6 times of MIL (0.0078 min-1), and 3.6 times of MIL/Mn-STO (0.0095 min-1). Remarkably, superoxide radicals (•O2-) and holes (h+) have been recognized as the main active species in the degradation process through reactive species elimination experiments and electron spin resonance (ESR) tests. The experimental and theoretical proved the in-built interfacial contact and synergistic effect between the photocatalyst accomplished with low bandgaps, high specific surface area, more reaction sites, high electron-hole pair separation, and maximum solar-light utilization. The molecular structure and possible degradation routes with intermediate products in the photocatalytic system were investigated using a liquid chromatography-mass spectrometer (LC-MS) and DFT calculations. This work provided new insight into the guidelines of rational design/growth of new multicomponent photocatalysts to remove antibiotics and other emerging contaminants in wastewater.

Development of Bronze Phase Titanium Dioxide Nanorods for Use as Fast-Charging Anode Materials in Lithium-Ion Batteries

Bronze phase titanium dioxide (TiO₂(B)) nanorods were successfully prepared via a hydrothermal method together with an ion exchange process and calcination by using anatase titanium dioxide precursors in the alkali hydrothermal system. TiO₂ precursors promoted the elongation of nanorod morphology. The different hydrothermal temperatures and reaction times demonstrated that the synthesis parameters had a significant influence on phase formation and physical morphologies during the fabrication process. The effects of the synthesis conditions on the tailoring of the crystal morphology were discussed. The growth direction of the TiO₂(B) nanorods was investigated by X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The as-synthesized TiO₂(B) nanorods obtained after calcination were used as anode materials and tested the efficiency of Li-ion batteries. This research will study the effects of particle morphologies and crystallinity of TiO₂(B) derived from a modified hydrothermal method on the capacity and charging rate of the Li-ion battery. The TiO₂(B) nanorods, which were synthesized by using a hydrothermal temperature of 220 °C for 12 h, presented excellent electrochemical performance with the highest Li storage capacity (348.8 mAh/g for 100 cycles at a current density of 100 mA/g) and excellent high-rate cycling capability (a specific capacity of 207.3 mAh/g for 1000 cycles at a rate of 5000 mA/g).

Polyether Ether Ketone Coated with Ultra-Thin Films of Titanium Oxide and Zirconium Oxide Fabricated by DC Magnetron Sputtering for Biomedical Application

Recently, polyether ether ketone has raised increasing interest in research and industry as an alternative material for bone implants. This polymer also has some shortcomings, as it is bioinert and its surface is relatively hydrophobic, causing poor cell adhesion and therefore slow integration with bone tissue. In order to improve biocompatibility, the surface of polyether ether ketone-based implants should be modified. Therefore, polished disc-shaped polyether ether ketone samples were surface-modified by direct current magnetron sputtering with ultrathin titanium and zirconium coatings (thickness < 100 nm). The investigation results show a uniform distribution of both types of coatings on the sample surfaces, where the coatings mostly consist of titanium dioxide and zirconium dioxide. Differential scanning calorimetry revealed that the crystalline structure of the polyether ether ketone substrates was not changed by the coating deposition. Both coatings are amorphous, as shown by X-ray diffraction investigations. The roughness of both coating types increases with increasing coating thickness, which is beneficial for cell colonization. The coatings presented and investigated in this study improve wettability, increasing surface energies, in particular the polar component of the surface energies, which, in turn, are important for cell adhesion.

Dynamic control of pentachlorophenol photodegradation process using P25/PDA/BiOBr through regulation of photo-induced active substances and chemiluminescence

Photodegradation is a new approach for the removal of pentachlorophenol (PCP). Photooxidation degradation (using hydroxyl radicals) exhibits better performance to remove PCP than photoreduction degradation, but the former will lead to an increase in the production of toxic by-products such as tetrachloro-1,4-benzoquinone (TCBQ). Thus, a new strategy is required to enhance PCP photodegradation and simultaneously inhibit toxic intermediates production. Herein, TiO₂ (P25)/polydopamine (PDA)/BiOBr was synthesized and used to photodegrade PCP. Based on the relative position of the CB and VB of P25 and BiOBr, and PDA as an electron transfer mediator, a high number of holes, electrons, and superoxide anions were produced instead of hydroxyl radicals. The photocatalytic activity of P25/PDA/BiOBr exhibited the best performance among as-prepared samples, reaching a k_(pcp) value of 0.4 min^-1 (20 μM PCP) under UV light irradiation within 10 min. According to chemiluminescence and acute toxicity assays, relative to P25, the toxic intermediates of TCBQ and trichlorohydroxy-1,4-benzoquinone (OH-TrCBQ) generation was greatly reduced over P25/PDA/BiOBr, with a lack of toxic product generation during PCP photodegradation process. These findings provide an alternative strategy to achieve greener and more efficient organic pollutant photodegradation.

Photocatalytic activity of MnTiO3 perovskite nanodiscs for the removal of organic pollutants

MTO nanodiscs synthesized using the hydrothermal approach were explored for the photocatalytic removal of methylene blue (MB), rhodamine B (RhB), congo red (CR), and methyl orange (MO). The disc-like structures of ~16 nm thick and ~291 nm average diameter of stoichiometric MTO were rhombohedral in nature. The MTO nanodiscs delivered stable and recyclable photocatalytic activity under Xe lamp irradiation. The kinetic studies showed the 89.7, 80.4, 79.4, and 79.4 % degradation of MB, RhB, MO, and CR at the rate constants of 0.011(±0.001), 0.006(±0.001), 0.007(±0.0007), and 0.009 (±0.0001) min-1, respectively, after the 180 min of irradiation. The substantial function of photogenerated holes and hydroxide radicals pertaining to the dye removal phenomena is confirmed by radical scavenger trapping studies. Overall, the present studies provide a way to develop pristine and heterostructure perovskite for photocatalysts degradation of various organic wastes.

Structural correlation of a nanoparticle-embedded mesoporous CoTiO3 perovskite for an efficient electrochemical supercapacitor

We synthesized mesoporous cobalt titanate (CTO) microrods via the sol-gel method as an outstanding working electrode for the supercapacitor. The mesoporous CTO microrods were amassed in hexagonal shapes of an average width of ∼670 nm, and were composed of nanoparticles of average diameter ∼41 nm. The well crystalline CTO microrods of the hexagonal phase to the R3̄ space group possessed an average pore size distribution of 3.92 nm throughout the microrod. The mesoporous CTO microrods with increased textural boundaries played a vital role in the diffusion of ions, and they provided a specific capacitance of 608.4 F g-1 and a specific power of 4835.7 W kg-1 and a specific energy of 9.77 W h kg-1 in an aqueous 2 M KOH electrolyte, which was remarkably better than those of Ti, La, Cr, Fe, Ni, and Sr-based perovskites or their mixed heterostructures supplemented by metal oxides as an impurity. Furthermore, the diffusion-controlled access to the OH- ions (0.27 μs) deep inside the microrod conveyed high stability, a long life cycle for up to 1950 continuous charging-discharging cycles, and excellent capacitance retention of 82.3%. Overall, the mesoporous CTO shows its potential as an electrode for a long-cycle supercapacitor, and provides opportunities for additional enhancement after developing the core-shell hetero-architecture with other metal oxide materials such as MnO2, and TiO2.

Effects of Au loading on the enhancement of photoelectrochemical activities of the Au@ZnO nano-heteroarchitecture

The nano-heteroarchitecture of Au@ZnO evidencing the surface attachment without chemical reaction at the interface delivered enhanced PEC activities by facilitating the injection of hot electrons from the SP state into the conduction band of ZnO.