Deep Eutectic Solvents (DES) as Green and Efficient Solvent/Catalyst Systems for the Synthesis of Carbamates and Ureas from Carbonates

Facile synthesis of triazolo/benzazolo[2,1-b]quinazolinone derivatives catalyzed by a new deep eutectic mixture based on glucose, pregabalin and urea

In this study, a novel natural deep eutectic solvent was prepared from glucose, pregabalin, and urea. The prepared solvent was identified using a variety of techniques, including Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), derivative thermogravimetry (DTG), differential thermal analysis (DTA), and refractive index measurements (RI). The prepared deep eutectic solvent was then utilized for the one-pot synthesis of quinazolinone derivatives. The yields of the product obtained with and without the catalyst were determined, providing insights into the catalytic efficiency of the system. This protocol offers several advantages, including mild reaction conditions, easy reagent preparation, a green process, short reaction times (2-60 min), high yields (80-99%), and a straightforward procedure with the possibility of catalyst reusability.

An acid-based DES as a novel catalyst for the synthesis of pyranopyrimidines

Deep eutectic solvents have countless advantages over normal solvents, and in addition to complying with the principles of green chemistry, depending on their nature, they can also act as catalysts. The use of deep eutectic solvents as acid catalysts has several advantages such as non-toxicity, a catalytic effect similar to or higher than the acid itself, and the possibility of recovery and reuse without significant loss of activity. In this project, A novel deep eutectic solvent (MTPPBr-PCAT-DES) was prepared from a one-to-one mole ratio of methyltriphenyl-phosphonium bromide (MTPPBr) and 3,4-dihydroxybenzoic acid (PCAT = protocatechuic acid) and characterized by various techniques such as FT-IR, TGA/DTA, densitometer, eutectic point, 1H NMR, 13C NMR and 31P NMR. Then, it was used as a novel and capable catalyst for the synthesis of pyranopyrimidines from the multicomponent condensation reaction of barbituric acid, 4-hydroxycoumarin, and aromatic aldehydes in mild conditions, short reaction times, and high yields.

A Mild, Efficient and Sustainable Tetrahydropyranylation of Alcohols Promoted by Acidic Natural Deep Eutectic Solvents

A straightforward protocol to promote the tetrahydropyranylation of alcohols, using for the first time bioinspired acidic natural deep eutectic solvents (NADESs) as non-innocent reaction media under mild reaction conditions, was reported. This approach enables the preparation of several tetrahydropyranyl (THP) ethers starting from primary, secondary and tertiary alcohols in short reaction times and with high levels of chemoselectivity, working under air and without the need of additional catalyst. The sustainability of the methodology was further highlighted by its scalability and the easy recyclability of the NADES, allowing multigram preparations of THP ethers without any loss of the catalytic activity of the reaction media up to ten recycling steps. Telescoped, one-pot tetrahydropyranylation/nucleophilic acyl substitution transformations using the same eutectic mixture were also demonstrated.

Deep Eutectic Solvents as à-la-Carte Medium for Transition-Metal-Catalyzed Organic Processes

Our society is facing a tremendous challenge to become more sustainable in every sphere of life. Regarding the chemical industry, one of the most significant issues to be addressed is the use of volatile organic compounds (VOCs) as solvents because they are petrol-derived and most of them are toxic and flammable. Among the possible solutions, deep eutectic solvents (DESs) have emerged as sustainable alternatives to VOCs in organic catalyzed transformations and other fields. The advantages of these new reaction media are not only related to their more benign physical and chemical properties and, for most of them, their renewable sources but also due to the possibility of being recycled after their use, increasing the sustainability of the catalyzed process in which they are involved. However, their use as media in catalytic transformations introduces new challenges regarding the compatibility and activity of known catalysts. Therefore, designed catalysts and "à-la-carte" DESs systems have been developed to overcome this problem, to maximize the reaction outcomes and to allow the recyclability of the catalyst/media system. Over the last decade, the popularity of these solvents has steadily increased, with several examples of efficient metal-catalyzed organic transformations, showing the efficiency of the catalysts/DES system, compared to the related transformations carried out in VOCs. Additionally, due to the inherent properties of the DES, unknown transformations can be carried out using the appropriated catalyst/DES system. All these examples of sustainable catalytic processes are compiled in this review.

Choline Chloride/Glycerol Promoted Synthesis of 3,3-Disubstituted Indol-2-ones

Objective:

3,3-Disubstituted indol-2-one derivatives have wider applications in pharmaceuticals and they are key intermediates for the synthesis of many kinds of drug candidates. The development of an efficient and practical method to prepare this class of compound is highly desirable from both environmental and economical points of views.

Methods:

In order to establish an effective synthetic method for preparing 3,3-disubstituted indol-2-one derivatives, the bis-condensation reaction of isatin and 1H-indene-1,3(2H)-dione was selected as a model reaction. A variety of natural deep eutectic solvent (NADES) were prepared and used for this reaction. The generality and limitation of the established method were also investigated.

Results:

It was found that model reaction can be carried out in natural deep eutectic solvent (NADES) based on choline chloride (ChCl) at 80 oC under microwave irradiation. This protocol with a broad substrate applicability afforded various 2,2'-(2-oxoindoline-3,3-diyl)bis(1H-indene-1,3(2H)-dione) derivatives in high yields.

Conclusion:

simple and efficient procedure has been developed for synthesis of 2,2'-(2-oxoindoline-3,3-diyl)bis(1H-indene-1,3(2H)-dione), spiro[indoline-3,7'-pyrano[5,6-c:5,6-c']dichromene]-2,6',8'-trione, and spiro[indoline-3,9'-xan-thene] trione via bis-condensation between isatin with 1,3-indandione, 4-hydroxycoumarin or 1,3-cyclohexanedione in nat-ural deep eutectic solvent (NADES) based on choline chloride (ChCl) and glycerol (Gl) under microwave irradiation. The salient features of this protocol are avoidance of any additive/catalyst and toxic organic solvent, clean reaction profiles, non-chromatographic purification procedure, and high to excellent yield. Furthermore, the use of NADES as green reaction medium reduces burden on environment and makes the present method environmentally sustainable.

A promising TNT alternative 3,3'-bi(1,2,4-oxadiazole)-5,5'-diylbis(methylene)dinitrate (BOM): thermal behaviors and eutectic characteristics

3,3′-Bi(1,2,4-oxadiazole)-5,5′-diylbis(methylene)dinitrate (BOM) is a liquid phase carrier for melt cast explosives that is expected to replace TNT. The combination of a conjugated 1,2,4-oxadiazole backbone and nitrate ester groups endows BOM with both good energetic performance and impressive insensitivity. In this paper, the thermal behaviors of BOM were investigated using a TG–DSC synchronous thermal analyzer, proving that BOM is basically non-volatile under heating and melting processes. The apparent activation energy of BOM calculated by the Kissinger method was 158.2 kJ mol⁻¹ at atmospheric pressure, which is higher than that of DNTF at atmospheric pressure and TNT at 2 MPa, indicating good thermal stability at low temperatures. The thermal decomposition mechanism of BOM was studied through both DSC-MS and in situ FTIR technologies. The low eutectic characteristics of BOM and DNTF were also investigated carefully and the best ratio of BOM/DNTF was 40/60 with a melting point at 75.5 °C. Finally, the detonation performances of TNT/HMX, BOM/HMX and BOM/DNTF(40/60)/HMX explosive formulations were calculated, showing that the detonation performances of the latter two formulations were significantly higher than that of TNT/HMX.

3,3′-Bi(1,2,4-oxadiazole)-5,5′-diylbis(methylene)dinitrate (BOM) is a liquid phase carrier for melt cast explosives that is expected to replace TNT.

Metal-free late-stage C(sp2)-H functionalization of N-aryl amines with various sodium salts

Metal-free consecutive C(sp2)-X (X = Cl, Br, S, N) bond formations of N-aryl amines (cyclic, fused, carbamate, and aminium radicals) were achieved under mild conditions using [bis(trifluoroacetoxy)iodo]benzene (PIFA) and simple nonharmful sodium salts. This direct and selective C(sp2)-H functionalization showed excellent functional group compatibility, cost effectiveness, and late-stage applicability for the synthesis of biologically active natural products. Two mechanisms were proposed to explain the ortho- or para-preference, as well as the accelerating effect of CH3NO2.

N-Arylation of (hetero)arylamines using aryl sulfamates and carbamates via C–O bond activation enabled by a reusable and durable nickel(0) catalyst

An effective and general aryl amination protocol has been developed using a magnetically recoverable Ni(0) based nanocatalyst.