Optimization Removal of the Ceftriaxone Drug from Aqueous Media with Novel Zero‐Valent Iron Supported on Doped Strontium Hexaferrite Nanoparticles by Response Surface Methodology

Experimental and Modeling Optimization of Strontium Adsorption on Microbial Nanocellulose, Eco-friendly Approach

Green synthesized cellulose nanocrystals (CNCs) was prepared using Neurospora intermedia, characterized, and used to remove Strontium ions (Sr2+) from an aqueous solution with high efficiency. The characterization of CNCs was performed using a UV-Vis Spectrophotometer, Dynamic Light Scattering (DLS), Zeta Potential (ZP), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) mapping, EDX elemental analysis and BET surface analyzer. In this study, Response Surface Methodology (RSM) based on Box-Behnken Design (BBD) was successfully applied for the first time to optimize the dynamic adsorption conditions for the maximum removal of Sr2+ ions from aqueous solutions using CNCs as adsorbent. The effects of parameters, such as initial concentration of Sr2+ (50–500 ppm), adsorbent dosage (0.05–0.2 g/50ml), and contact time (15–120 min.) on removal efficiency were investigated. A mathematical model was studied to predict the removal performance. The significance and adequacy of the model were surveyed using the analysis of variance (ANOVA). The results showed that the second-order polynomial model is suitable for the prediction removal of Sr2+ with regression coefficient (R2 = 97.41%). The highest sorption capacity value of Sr2+ was obtained (281.89 mg/g) at the adsorbent dosage of 0.05 g/50 ml, contact time of 120 min., and the pollutant (Sr2+) concentration of 275 ppm.

A Review of Methods for Removal of Ceftriaxone from Wastewater

The presence of pharmaceuticals in surface water and wastewater poses a threat to public health and has significant effects on the ecosystem. Since most wastewater treatment plants are ineffective at removing molecules efficiently, some pharmaceuticals enter aquatic ecosystems, thus creating issues such as antibiotic resistance and toxicity. This review summarizes the methods used for the removal of ceftriaxone antibiotics from aquatic environments. Ceftriaxone is one of the most commonly prescribed antibiotics in many countries, including Tanzania. Ceftriaxone has been reported to be less or not degraded in traditional wastewater treatment of domestic sewage. This has piqued the interest of researchers in the monitoring and removal of ceftriaxone from wastewater. Its removal from aqueous systems has been studied using a variety of methods which include physical, biological, and chemical processes. As a result, information about ceftriaxone has been gathered from many sources with the searched themes being ceftriaxone in wastewater, ceftriaxone analysis, and ceftriaxone removal or degradation. The methods studied have been highlighted and the opportunities for future research have been described.

The efficient removal of bisphenol A from aqueous solution using an assembled nanocomposite of zero-valent iron nanoparticles/graphene oxide/copper: Adsorption isotherms, kinetic, and thermodynamic studies

In this study, nanoparticles of zero-valent iron (nZVI) along with graphene oxide (GO) and copper (Cu) was synthesized to apply as a promising adsorbent for the rapid removal of bisphenol A (BPA) from aqueous solution. The characteristics of nZVI-GO-Cu were analyzed by field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), X-Ray Diffraction (XRD), and vibrating sample magnetometer (VSM). The average particle size of nZVI-GO-Cu was found to be 20.89 nm. The effective experimental variables such as pH, adsorbent dosage, contact time, initial BPA concentration, and temperature were surveyed to assess optimum conditions. Results revealed that the maximum removal percentage was obtained at pH of 7, adsorbent dosage of 0.2 g, contact time of 10 min, the BPA concentration of 10 mg/L, and a temperature of 35 °C as optimum conditions. Experimental data were fitted to the Langmuir and pseudo second-order models with a coefficient of determination (R²) equal to 1 and 0.995, respectively. The obtained maximum adsorption capacity (q_max) of the Langmuir isotherm was 21.59 mg g^-1. Thermodynamic parameters under the various temperatures confirmed that the adsorption process was endothermic (ΔH = 17,459.4 J/mol and ΔS = 61.23 J/mol/K) and spontaneous (ΔG < 0). As a conclusion, nZVI-GO-Cu can be selected as an efficient adsorbent for the treatment of aqueous media from BPA and the other pollutants, due to its low-cost, high removal efficiency (97%), and rapid adsorption with the minimum time of 10 min compared with the other adsorbents.