Catalytic Performance of In/HZSM‐5 for Coupling Propane with CO 2 to Propylene

Metallic Catalysts for Oxidative Dehydrogenation of Propane Using CO2

The oxidative dehydrogenation of propane using CO₂ (CO₂ -ODP) is a promising technique for realizing high-yield propylene production and CO₂ usage. Developing a highly efficient catalyst for CO₂ -ODP is essential and beneficial to the chemical industry and for realizing net-zero emissions. Many studies have investigated metal oxide-based catalysts, revealing that rapid deactivation and low selectivity remain limiting factors for their industrial applications. In recent years, metallic nanoparticle catalysts have become increasingly attractive due to their unique properties. Therefore, we summarize the performance of metal-based catalysts in CO₂ -ODP reactions by considering catalyst design concepts, different mechanisms in the reaction process, and the role of CO₂ .

Catalytic Pyrolysis of Nonedible Oils for the Production of Renewable Aromatics Using Metal-Modified HZSM-5 Catalysts

Catalytic pyrolysis of triglycerides to aromatics over zeolites is an advanced technology for a high value-added utilization of renewable biomass resources. Therefore, in this research, the catalytic performance of M/HZSM-5 catalysts (M = Zn, Ga, In, Ni, and Mo) during the pyrolysis process of glycerol trioleate and the effect of the compositional difference of several woody oils and waste oils on aromatic formation were investigated. Results revealed that Zn/HZSM-5 with appropriate acidity and metal sites reached the maximum aromatics yield (56.13%) and significantly enhanced the catalytic stability. In addition, these renewable nonedible oils were effectively converted to aromatics over the Zn/HZSM-5 catalyst, the aromatic yield of jatropha oil reached up to 50.33%, and the unsaturation and double bond number of feedstocks were crucial for the production of aromatics. The utilization of biomass resources to produce high value-added aromatics can alleviate the problems caused by the shortage of fossil resources and achieve sustainable green development.

Research progress of CO2 oxidative dehydrogenation of propane to propylene over Cr-free metal catalysts

CO₂-assisted oxidative dehydrogenation of propane (CO₂-ODHP) is an attractive strategy to offset the demand gap of propylene due to its potentiality of reducing CO₂ emissions, especially under the demands of peaking CO₂ emissions and carbon neutrality. The introduction of CO₂ as a soft oxidant into the reaction not only averts the over-oxidation of products, but also maintains the high oxidation state of the redox-active sites. Furthermore, the presence of CO₂ increases the conversion of propane by coupling the dehydrogenation of propane (DHP) with the reverse water gas reaction (RWGS) and inhibits the coking formation to prolong the lifetime of catalysts via the reverse Boudouard reaction. An effective catalyst should selectively activate the C-H bond but suppress the C-C cleavage. However, to prepare such a catalyst remains challenging. Chromium-based catalysts are always applied in industrial application of DHP; however, their toxic properties are harmful to the environment. In this aspect, exploring environment-friendly and sustainable catalytic systems with Cr-free is an important issue. In this review, we outline the development of the CO₂-ODHP especially in the last ten years, including the structural information, catalytic performances, and mechanisms of chromium-free metal-based catalyst systems, and the role of CO₂ in the reaction. We also present perspectives for future progress in the CO₂-ODHP.

Coupling of propane with CO2 to propylene over Zn-promoted In/HZSM-5 catalyst

The ZnIn/HZSM-5 catalyst was prepared by the wetness impregnation method, and the structure of catalyst was characterized by XRD, SEM, TEM, H2-TPR, NH3-TPD, XPS, TG, and N2 adsorption–desorption and then investigated in the coupling of propane with CO2 to propylene. It is found that the addition of Zn species is beneficial to the dispersion of In2O3 over HZSM-5, which plays an important role in propene formation, and adjusts the acidity distribution of In/HZSM-5 catalyst, as well as significantly improves the activity of In/HZSM-5 catalyst. The selectivity of propylene is 68.21% in the coupling of propane with CO2 over ZnIn/HZSM-5 catalyst when the time on stream (TOS) is 2 h, reaction temperature is 580 °C, reaction pressure is 0.3 MPa, C3H6:CO2:N2 = 1:4:5, catalyst mass is 0.2 g, and space velocity is 6000 mL gcat−1 h−1. However, the selectivity of propylene is only 63.33% and 0.25% in the propane dehydrogenation or CO2 hydrogenation reaction, respectively. The ZnIn/HZSM-5 catalyst showed a higher stability with only 0.80% conversion drop after three cycles.

Current status and perspectives in oxidative, non-oxidative and CO2-mediated dehydrogenation of propane and isobutane over metal oxide catalysts

Conversion of propane or isobutane from natural/shale gas into propene or isobutene, which are indispensable for the synthesis of commodity chemicals, is an important environmentally friendly alternative to oil-based cracking processes.