Chemical Sensors for Water Detection in Organic Solvents and their Applications

A "turn-on" fluorescent sensor based on three-component covalent organic framework for trace water detection

Trace amount of H2O is difficult to eliminate in laboratory environments and chemical industries as impurities. In some chemical reactions, trace amount of H2O can alter final reaction products, yield, and selectivity. So, the detection of trace H2O is very important. Herein, a series of TFPT[X]-BMTH- covalent organic frameworks (COFs) (X = 0, 33, 50, 67, 100 %) with intramolecular charge transfer effect (ICT) and aggregate-induced emission (AIE) characteristics were synthesized by amino-aldehyde condensation reaction between 2,5-bis(2-methoxyethoxy)terephthalohydrazide (BMTH)/ 1,3,5-tris(p-formylphenyl)benzene (TFPB) and 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (TFPT). By changing TFPT' content in TFPT[X]-BMTH-COFs, the ICT and AIE of TFPT[X]-BMTH-COFs can be controlled, and accordingly the response to trace H2O can be adjusted. A H2O sensor based on TFPT[67]-BMTH-COF with a wide linear range from 0 wt% to 0.5 wt% was developed and the detection limit was 0.00007 wt%. In addition, a portable fluorescent test paper based on TFPT[67]-BMTH-COF for visual detection of trace H2O in honey samples and salt was constructed. This work has important guiding significance for the development of fluorescent probes for the visual detection of trace water.

Water detection in organic solvents using a copolymer membrane immobilised with a fluorescent intramolecular charge transfer-type dye: effects of intramolecular hydrogen bonds

Numerous fluorescent dye-based optical sensors have been developed to detect water in organic solvents. However, only a few such sensors can detect water in polar solvents such as methanol or dimethyl sulfoxide, and their detection range is generally narrow. Therefore, in this study, a copolymer membrane incorporated with a pyridinium betaine dye (denoted PB1), which exhibited intramolecular charge transfer (ICT) characteristics, was developed to realise simple water detection in organic solvents. The pyridinium betaine structure, comprising intramolecular hydrogen bonds between the oxygen in the maleimide moiety and the hydrogen in the pyridinium, was vital for achieving efficient fluorescence emission. The membrane was prepared by copolymerising PB1 with the N,N-dimethyl acrylamide/acrylamide monomer on a glass plate, and the fluorescence in water-mixed organic solvents was investigated (λabs = 490 nm, λfl = 630 nm). The fluorescence intensity of the dye-immobilised membrane decreased with increasing water content of the organic solvents. The detection ranges in tetrahydrofuran, ethanol, methanol, and dimethyl sulfoxide were approximately <40, <40, <40, and <60 vol% water, respectively. In contrast, membranes based on a quaternary pyridinium dye (without intramolecular hydrogen bonds) did not detect water in methanol and dimethyl sulfoxide, although it was more sensitive than PB1 in the narrow region of low water concentration in THF. Theoretical calculations corroborated the importance of the pyridinium betaine structure in detecting water in organic solvents, with the increase in polarity and the formation of intermolecular hydrogen bonds between PB1 and water found to induce molecular rotation and fluorescence quenching.

A dynamic Eu(III)-macrocycle served as the turn-on fluorescent probe for distinguishing H2O from D2O

H2O and D2O are an important pair of analogues, and their high-efficient detections are closely related to fields of chemical industry, food processing, semiconductor, environmental monitoring, etc. Because of their extremely similar physical and chemical properties, H2O and D2O can be mutually soluble in any ratios, and it is generally thought that the discrimination of H2O and D2O is an enormous challenge. Herein, upon the fact that vibrational frequency of O-H is greater than O-D, we design a dynamic Eu(III)-macrocycle Eu-2a with two emitters which exhibits the imine bond breakage of macrocycle emitter H2L2a in H2O or D2O, resulting in the turn-on fluorescence of Eu(III) emitter. For their differential fluorescence sensing signals of Eu-2a on three emission bands (433, 500 and 615 nm), the statistical analysis method is employed to produce fully separated fingerprints and thus high-throughput discrimination of 13 common solvents, especially the H2O and D2O. Fluorescent titration experiments by instrumental or smartphone-based analysis method also prove the successful determination of proportional H2O/D2O mixtures together with the good sensitivity and wide linear response range. Moreover, this H2O-triggered fluorescent complex Eu-2a used as the fluorescence ink also shows its potential in information encryption application. This article must be a valuable reference for the areas of lanthanide-based luminescent material, multianalyte detection and information encryption.

Luminescent Properties of β-(hydroxyaryl)-butenolides and Fluorescence Quenching in Water

This work describes the luminescent properties of the new compound β-(hydroxyaryl)-butenolides recently discovered. The compounds were subjected to UV-Vis absorption and fluorescence analyzes when diluted in different solvents. Through the results, it was possible to observe that the β-hydroxyarylutenolides have two absorption bands, one at 289-291 nm and the other with higher intensity at 328-354 nm. The emission band between 385-422 nm is observed under excitation at 324-327 nm. The compounds showed solvatochromism as a function of the analyzed solvent. In water, fluorescence quenching of all compounds occurs. Therefore, studies with compound containing the methylenedioxy group attached in phenyl ring were carried at different concentrations of water in DMSO. The decrease in the fluorescence intensity of this compound is linearly proportional to the increase in the amount of water in the DMSO, with a minimum detection volume of 0.028%. Quantum yields of three compounds were evaluated in different solvents, showing that the relationship between the structure of the compound and the solvent is essential for a high value. The fluorescence quantum yield was also measured by Thermal Lens Spectroscopy (TLS) using DMSO as the solvent, confirming the high value for the analyzed samples. Despite being preliminary, the studies revealed that these compounds have luminescent properties that could be applied in the development of chemical sensors for detecting water in DMSO.

A tert-Butyldiphenylsilyl-Containing Polyimide-Based Chemosensor for Sequential Detection of Fluoride Ions and Trace Water in Organic Solvents

A tert-butyldiphenylsilyl-containing polyimide (PI-OSi) has been established as a colorimetric and ratiometric chemosensor for rapid detecting fluoride ions (F-). The UV-vis absorbance ratio value (A322/A288) of PI-OSi in a DMF solution displays a wide linear range change to F- concentrations with a detection limit (DL) value of 2.13 μM. Additionally, adding incremental amounts of F- to a DMF solution of PI-OSi shows an immediate color change to yellow and finally to green from colorless. More interestingly, the resulting PI-OSi plus F- system (PI-OSi·F) could detect trace water in DMF. The A292/A322 value of PI-OSi·F almost linearly increases with low water content, which suggests convenient quantitative sensing of trace water content in DMF. The DL value of PI-OSi·F for sensing water in DMF is determined to be 0.00149% (v/v). The solution color of PI-OSi·F returns to colorless when the water content increases, indicating that PI-OSi·F can conveniently estimate water content in DMF by naked-eye detection. The detection mechanisms confirmed by an 1H NMR study and a DFT calculation involve a F--induced desilylation reaction of PI-OSi to form phenolate anion followed by protonation with trace water. Finally, PI-OSi film was fabricated for the colorimetric detection of F- and water in CH3CN.

Pyrene-based fluorescent chemosensor for rapid detection of water and its applications

This manuscript introduces a pyrene-based Schiff base L by reacting pyrenecarboxaldehyde with 2-aminothiazole in equimolar ratio. The ligand L was characterized by various spectral data and single crystal. The water sensing ability of L was examined in different organic solvents. The weakly emissive L in DMSO showed a fluorescence enhancement upon the addition of water. The water-induced fluorescence enhancement of L was occurred due to the combined effect of aggregation-induced emission (AIE) phenomenon and suppression of photo-induced electron transfer (PET) process. Using L, the water in DMSO can be detected down to 0.50 wt% with a quantification limit of 1.52 wt%. The analytical novelty of the developed sensor L was validated by detecting moisture in a variety of raw food products.

ESIPT-based probes for cations, anions and neutral species: recent progress, multidisciplinary applications and future perspectives

Fluorescent and colourimetric probes for small analytes (cations, anions and neutral molecules) have drawn significant attention in recent years. These probes interact with analytes and induce spectral change due to the variations in the photo-physical properties of the fluorophore/chromophore used. Among several photo-physical mechanisms, ESIPT (excited state intramolecular proton transfer) based probes are more advantageous due to their photo-physical properties viz. solvent polarity effect, large spectral shift with multi-channel fluorescence, high quantum yield etc. In recent years, ESIPT-based probes have shown several promising applications, especially monitoring small analytes in biological samples, smartphone app-assisted heavy metal detection in environmental samples, inkless writing, anti-counterfeiting applications etc. Therefore, this review is dedicated to recently reported ESIPT-based probes for small analytes. We have highlighted the organic units responsible for the ESIPT mechanism, their photo-physical parameters, selectivity and sensitivity properties and recent advances in their applications.

Beyond Karl Fischer titration: a monolithic quantum cascade sensor for monitoring residual water concentration in solvents

Quality control of liquids is an important part of analytical chemistry. The gold standard for measuring residual water in organic solvents and pharmaceutical applications is Karl Fischer titration. It has a high sensitivity, selectivity and accuracy. The downsides are a time-consuming offline analysis, together with the need for toxic reagents producing waste, and it suffers from poor inter-laboratory reproducibility. In this work, we present a high-performance lab-on-a-chip sensor exploiting mid-IR spectroscopy for liquid sensing. It is operating at 6.1 μm wavelength and is suitable for robust and flexible real-time in situ analysis of the residual water concentration in isopropyl alcohol. This is demonstrated in two experiments. A custom-made 60 μL flow cell is employed to measure only minute amounts of analyte in an inline configuration. In a second approach, the whole sensor is immersed into the analyte to demonstrate sensitive and rapid in situ operation on the millisecond time scale. This is confirmed by the ability for time resolved single water-droplet monitoring, while they are mixed into the liquid sample. We obtain a limit of detection between 120 ppm and 150 ppm with a concentration coverage spanning three orders of magnitude from 1.2 × 10^-2%_vol to 25%_vol for the flow cell and 1.5 × 10^-2%_vol to 19%_vol in the in situ configuration, respectively.

Fast quantification of water content in glycols by compact 1H NMR spectroscopy

Glycols are key chemicals for many applications in different fields of activities. Being highly hydroscopic, glycols contain usually water. The presence of water, even in tiny amounts, can affect their chemical and physical properties. Therefore, the accurate determination of water content is essential for any intended applications. In this context, a novel method using low-field Nuclear Magnetic Resonance (NMR) spectroscopy is introduced. The proposed approach offers a straightforward, fast, low-cost, and versatile solution for water quantification in glycols without the need for reagents or calibration data. It is demonstrated by quantifying the water concentration up to 11 wt% in aqueous ethylene glycol (EG) and triethylene glycol (TEG) mixtures with the help of lineshape analysis of the corresponding proton spectra. The limit of detection, achieved within 1 min of measuring time, was 0.05 wt% for water in EG and 0.15 wt% in TEG. The excellent agreement between the NMR results and those from the Karl-Fischer titration indicates that the proposed NMR-based approach has a great potential to be used as an alternative to the Karl-Fischer method. In addition, it is expected that the same methodology can be applied for water quantification in more complex glycolic solutions and other mixtures.

Fluorescence Sensor for Water in Organic Solvent Using Graphene Oxide- Rhodamine B and Cucurbit[7]uril

Detection of water in organic solvents gained much importance as these solvents have been used as a medium for conducting organic reactions and water was considered as an inhibitor, when it is present in the reaction medium. There are number of methods available to measure the water content in organic solvents, however, such methods are time consuming and expensive. Here, we developed a facile method for detecting water in organic solvents using an inexpensive fluorescent probe - Rhodamine B decorated Graphene oxide (RBGO). The fluorescent probe, RBGO can be conveniently prepared by mixing the rhodamine B (RB) with graphene oxide (GO) in water. However, the probe will function as a sensor for water in the organic solvents through the release of dye upon interaction with the water present in organic solvents. Surprisingly, combination of cucurbit[7]uril (CB[7]) and RBGO increased the sensitivity of this sensor dramatically for the detection of water. This is the first example of water sensor with best detection limit by the involvement of host molecules such as CB[7]. This sensor displayed the low limit of detection (LOD) for organic solvents (LOD: 0.0015% for DMSO, 0.0025% for DMF), through the two-way process such as decomplexation and encapsulation. We presume that the role of CB [7] can be implemented in other similar sensors to enhance the sensitivity.

Alkyl-Engineered Dual-State Luminogens with Pronounced Odd-Even Effects: Quantum Yields with up to 48% Difference and Crystallochromy with up to 22 nm Difference

Alkyl chain-resulted odd-even effects in fluorescence quantum yield (FLQY) have also been reported in organic luminescent materials (OLMs). However, the odd-even effects in FLQY caused by the alkyl substitutes in OLMs are generally very weak, with only single-digit differences. Here, we report a series of alkyl-substituted dual-state luminogens (DSEgens) showing extremely high solid-state FLQY in even-numbered analogues (>90% FLQY) and a dramatically pronounced odd-even effect in FLQY. The odd-even effect in FLQY is over 26% alternation, and a maximum of 48% difference in FLQY was observed between the compounds C1 and C2 with a methyl and ethyl substitution, respectively. C1 and C2 also displayed a crystallochromy with a 22 nm difference in emission wavelength. In addition, odd-even effects in the melting point and decomposition temperature were also observed. With these bright DSEgens, applications such as specific recognition of picric acid and ultrasensitive trace water detection have been demonstrated.

Fluoranthene dyes for the detection of water content in methanol

Three novel fluoranthene dyes were obtained by cycloaddition reactions using acrylonitrile and dialkyl acetylenedicarboxylates. Their fluorescence properties in different polar-organic solvents were investigated systematically. Meanwhile, spectral changes induced by the addition of water in methanol were observed, indicating that these fluoranthenes dyes can be efficiently used to detect the water content in methanol as probes. Significantly, the practical test measurements for the water contents in methanol illustrated the measured results with the three fluorescent probes were basically consistent with the water content added artificially. This demonstrated the potential of these fluoranthene dyes as probes in measuring the water content in methanol.

A dipodal bimane-ditriazole-diCu(II) complex serves as an ultrasensitive water sensor

An ultrasensitive fluorescent water sensor based on a dipodal bimane-Cu(II) complex is reported here. This complex, which is non-fluorescent in the absence of water, demonstrates a remarkable turn-on fluorescence in the presence of extremely low (0.000786% v/v) concentrations of water, via highly selective water-induced displacement of copper and restoration of the innate bimane fluorescence.

Highly Sensitive Water Detection Through Reversible Fluorescence Changes in a syn-Bimane Based Boronic Acid Derivative

Reported herein is a fluorometric and colorimetric sensor for the presence of trace amounts of water in organic solvents, using syn-bimane based boronate ester 1. This sensor responds to the presence of water with a highly sensitive turn-off fluorescence response, with detection limits as low as 0.018% water (v/v). Moreover, analogously high performance was observed when compound 1 was adsorbed on filter paper, with the paper-based sensor responding both to the presence of liquid water and to humid atmospheres. Reusability of the paper-based sensor up to 11 cycles was demonstrated, albeit with progressive decreases in the performance, and 1H NMR and mass spectrometry analyses were used to explain the observed, hydrolysis-based sensor response.

Tetraphenylethene–anthracene-based fluorescence emission sensor for detection of water with photo-induced electron transfer and aggregation-induced emission characteristics

As a fluorescent sensor for water over a wide range from low to high water content regions in organic solvents, we have designed and developed a PET (photo-induced electron transfer)/AIE...

Dual-functional ratiometric fluorescent sensor based on mixed-lanthanide metal-organic frameworks for detection of trace water and temperature

The rapid-response ratiometric sensors are promising materials to detect trace water and temperature. However, the accurately visualized water assay in very narrow-range still remains a challenge. Herein, a novel dual-functional...