Fabrication of controlled thermosensitive polymer nanopatterns with one-pot polymerization through chemical lithography

Polymer brush-based nanostructures: from surface self-assembly to surface co-assembly

Surface structures play an important role in the practical applications of materials. The synthesis of polymer brushes on a solid surface has emerged as an effective tool for tuning surface properties. The fabrication of polymer brush-based surface nanostructures has greatly facilitated the development of materials with unique surface properties. In this review article, synthetic methods used in the synthesis of polymer brushes, and self-assembly approaches applied in the fabrication of surface nanostructures including self-assembly of polymer brushes, co-assembly of polymer brushes and "free" block copolymer chains, and polymerization induced surface self-assembly, are reviewed. It is demonstrated that polymer brush-based surface nanostructures, including spherical surface micelles, wormlike surface structures, layered structures and surface vesicles, can be fabricated. Meanwhile, the challenges in the synthesis and applications of the surface nanostructures are discussed. This review is expected to be helpful for understanding the principles, methods and applications of polymer brush-based surface nanostructures.

Assembly of Plasmonic Nanoparticles on Nanopatterns of Polymer Brushes Fabricated by Electrospin Nanolithography

This paper presents electrospin nanolithography (ESPNL) for versatile and low-cost fabrication of nanoscale patterns of polymer brushes to serve as templates for assembly of metallic nanoparticles. Here electrospun nanofibers placed on top of a substrate grafted with polymer brushes serve as masks. The oxygen plasma etching of the substrate followed by removal of the fibers leads to linear patterns of polymer brushes. The line-widths as small as ∼50 nm can be achieved by precise tuning of the diameter of fibers, etching condition, and fiber-substrate interaction. Highly aligned and spatially defined patterns can be fabricated by operating in the near-field electrospinning regime. Patterns of polymer brushes with two different chemistries effectively directed the assembly of gold nanoparticles and silver nanocubes. Nanopatterned brushes imparted strong confinement effects on the assembly of plasmonic nanoparticles and resulted in strong localization of electromagnetic fields leading to intense signals in surface-enhanced Raman spectroscopy. The scalability and simplicity of ESPNL hold great promise in patterning of a broad range of polymer thin films for different applications.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Nanopatterned polymer brushes: conformation, fabrication and applications

Surfaces with end-grafted, nanopatterned polymer brushes that exhibit well-defined feature dimensions and controlled chemical and physical properties provide versatile platforms not only for investigation of nanoscale phenomena at biointerfaces, but also for the development of advanced devices relevant to biotechnology and electronics applications. In this review, we first give a brief introduction of scaling behavior of nanopatterned polymer brushes and then summarize recent progress in fabrication and application of nanopatterned polymer brushes. Specifically, we highlight applications of nanopatterned stimuli-responsive polymer brushes in the areas of biomedicine and biotechnology.

Selective patterning of gold surfaces by core/shell, semisoft hybrid nanoparticles

The generation of patterned surfaces with well-defined nano- and microdomains is demonstrated by attaching core/shell, semisoft nanoparticles with narrow size distribution to microdomains of a gold-coated silicon wafer. Near monodisperse nanoparticles are prepared using reversible addition-fragmentation chain transfer (RAFT) polymerization, initiated from a silica surface, to prepare a polystyrene shell around a silica core. The particles are then used as-prepared, or after aminolysis of the terminal thiocarbonyl group of the polystyrene shell, to give thiol-terminated nanoparticles. When gold-coated silicon wafers are immersed into very dilute suspensions of these particles (as low as 0.004 wt%), both types of particles are shown to adhere to the gold domains. The thiolated particles adhere selectively to the gold microdomains, allowing for microdomain patterning, while particles that contain the trithiocarbonate functionality lead to a much more even coverage of the gold surface with fewer particle aggregations.

Massively parallel patterning of complex 2D and 3D functional polymer brushes by polymer pen lithography

We report the first demonstration of centimeter-area serial patterning of complex 2D and 3D functional polymer brushes by high-throughput polymer pen lithography. Arbitrary 2D and 3D structures of poly(glycidyl methacrylate) (PGMA) brushes are fabricated over areas as large as 2 cm × 1 cm, with a remarkable throughput being 3 orders of magnitudes higher than the state-of-the-arts. Patterned PGMA brushes are further employed as resist for fabricating Au micro/nanostructures and hard molds for the subsequent replica molding of soft stamps. On the other hand, these 2D and 3D PGMA brushes are also utilized as robust and versatile platforms for the immobilization of bioactive molecules to form 2D and 3D patterned DNA oligonucleotide and protein chips. Therefore, this low-cost, yet high-throughput "bench-top" serial fabrication method can be readily applied to a wide range of fields including micro/nanofabrication, optics and electronics, smart surfaces, and biorelated studies.

Fabrications and Applications of Stimulus-Responsive Polymer Films and Patterns on Surfaces: A Review

In the past two decades, we have witnessed significant progress in developing high performance stimuli-responsive polymeric materials. This review focuses on recent developments in the preparation and application of patterned stimuli-responsive polymers, including thermoresponsive layers, pH/ionic-responsive hydrogels, photo-responsive film, magnetically-responsive composites, electroactive composites, and solvent-responsive composites. Many important new applications for stimuli-responsive polymers lie in the field of nano- and micro-fabrication, where stimuli-responsive polymers are being established as important manipulation tools. Some techniques have been developed to selectively position organic molecules and then to obtain well-defined patterned substrates at the micrometer or submicrometer scale. Methods for patterning of stimuli-responsive hydrogels, including photolithography, electron beam lithography, scanning probe writing, and printing techniques (microcontact printing, ink-jet printing) were surveyed. We also surveyed the applications of nanostructured stimuli-responsive hydrogels, such as biotechnology (biological interfaces and purification of biomacromoles), switchable wettability, sensors (optical sensors, biosensors, chemical sensors), and actuators.

Elliptical polymer brush ring array mediated protein patterning and cell adhesion on patterned protein surfaces

This paper presents a novel method to fabricate elliptical ring arrays of proteins. The protein arrays are prepared by covalently grafting proteins to the polymer brush ring arrays which are prepared by the techniques combining colloidal lithography dewetting and surface initiated atom-transfer radical polymerization (SI-ATRP). Through this method, the parameters of protein patterns, such as height, wall thickness, periods, and distances between two elliptical rings, can be finely regulated. In addition, the sample which contains the elliptical protein ring arrays can be prepared over a large area up to 1 cm(2), and the protein on the ring maintains its biological activity. The as-prepared ring and elliptical ring arrays (ERAs) of fibronectin can promote cell adhesion and may have an active effect on the formation of the actin cytoskeleton.

Liquid-mediated three-dimensional scanning probe nanosculpting

3D functional polymer brushes are fabricated by liquid-mediated scanning probe nanosculpting (LSPN). Surface-tethered functional polymer brushes, which are immersed in their good solvent, are mechanically cleaved away from the substrate by the AFM tip at high forces, and immediately imaged in situ with the same AFM tip at low applied forces.

Hierarchical polymer brush nanoarrays: a versatile way to prepare multiscale patterns of proteins

This paper presents a versatile way to prepare multiscale and gradient patterns of proteins. The protein patterns are fabricated by conjugating proteins covalently on patterns of polymer brush that are prepared by techniques combining colloidal lithography with photolithography, and two-step colloidal lithography. Taking advantages of this technique, the parameters of protein patterns, such as height, diameters, periods, and distances between two dots, can be arbitrarily tuned. In addition, the protein patterns with varies of architectures, such as microdiscs, microstripes, microrings, microtriangles, microgrids, etc., consisting of protein nanodots, are prepared and the sample size is up to 4 cm(2). The as-prepared patterns of fibronectin can promote the cell adhesion and cell location.

High-resolution, large-area, serial fabrication of 3D polymer brush structures by parallel dip-pen nanodisplacement lithography

Parallel dip-pen nanodisplacement lithography (p-DNL) is used for high resolution, serial fabrication of 3D structures of polymer brushes over millimeter length scales. With p-DNL, 2D initiator templates consisting of arrays of nanolines and nanodots with rationally designed lateral spacings are fabricated in parallel via a locally tip-induced nanodisplacement process, from which highly defined 3D polymer structures are grown via surface-initiated atom transfer radical polymerization.

pH-responsive one-dimensional periodic relief grating of polymer brush-gold nanoassemblies on silicon surface

In this work, we focus on the fabrication of the nanoassemblies consisting of the poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) brushes and gold nanoparticles (AuNPs). The employed process involves grafting of the PDMAEMA chains on an underlying substrate in a brush conformation followed by the immobilization of surface functionalized AuNPs by means of physical interaction (electrostatic attraction, entanglement, and hydrogen bonding). Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and UV-vis spectroscopy have been employed to characterize the prepared PDMAEMA-AuNP nanoassemblies. Polymer brushes possessing various thicknesses have been found to suppress the nanoparticles' aggregation and, hence, facilitate the surface coverage. Furthermore, we patterned the PDMAEMA-AuNP nanoassemblies as an one-dimensional periodic relief grating (OPRG). The subwavelength structure of OPRG has the optical features including artificial refractive index, form birefringence and resonance and band gap effects. A mean refractive index of the PDMAEMA-AuNP nanoassemblies can be controlled by the filling factors of the OPRG structure, so that a desired distribution of refractive index of the polymer brushes-gold OPRG under various stimuli can be realized. The employed approach is simple and highly versatile for the modification of surfaces with a wide range of NPs.

Polymer nanogels grafted from nanopatterned surfaces studied by AFM force spectroscopy

Nanopatterned cross-linked polymers are important for applications with controlled mechanical properties. Grafted linear and cross-linked polydimethylacrylamide gels on micro- and nanopatterns were created using iniferter-driven quasi-living radical polymerization combined with conventional photolithography and nanosphere lithography. Micropatterned linear polymers reproduce the expected scaling behavior at moderate grafting density. The addition of cross-linker to the polymerization solution leads to an increased tendency of early termination as determined by AFM force spectroscopy. Similarly, nanopatterned linear polymers show reduced thickness in agreement with the expected scaling relationship for nanoisland grafts that have reduced lateral confinement. The addition of cross-linker reintroduces some of the lateral confinement for the length of polymers reported here. The mechanical properties of both the micro- and nanopatterned linear as well as cross-linked polymers were analyzed using an algorithm to objectively determine the contact point in AFM force spectroscopy and two independent Hertz-based analysis approaches. The obtained Young's moduli are close to those expected for homogeneous thick polymer films and are independent of pattern size. Our results demonstrate that polymeric nanopillars with controlled elastic modulus can be fabricated using irreversible cross-linkers. They also highlight some of the factors that must be considered for successful fabrication of grafted nanopillars of defined mechanical and structural properties.

Stimulus-responsiveness and drug release from porous silicon films ATRP-grafted with poly(N-isopropylacrylamide)

In this report, we employ surface-initiated atom transfer radical polymerization (SI-ATRP) to graft a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), of controlled thickness from porous silicon (pSi) films to produce a stimulus-responsive inorganic-organic composite material. The optical properties of this material are studied using interferometric reflectance spectroscopy (IRS) above and below the lower critical solution temperature (LCST) of the PNIPAM graft polymer with regard to variation of pore sizes and thickness of the pSi layer (using discrete samples and pSi gradients) and also the thickness of the PNIPAM coatings. Our investigations of the composite's thermal switching properties show that pore size, pSi layer thickness, and PNIPAM coating thickness critically influence the material's thermoresponsiveness. This composite material has considerable potential for a range of applications including temperature sensors and feedback controlled drug release. Indeed, we demonstrate that modulation of the temperature around the LCST significantly alters the rate of release of the fluorescent anticancer drug camptothecin from the pSi-PNIPAM composite films.

Surface mechanical properties of thin polymer films investigated by AFM in pulsed force mode

Atomic force microscopy in the pulsed force mode (PFM) is applied in this work to the study of thin dewetting patterns formed by drying an aqueous solution of poly(N-isopropylacrylamide) (PNIPAM) and sodium dodecyl sulfate (SDS) on mica. This technique allows the automated acquisition of typically 4 x 10(6) force-distance curves on the sample surface together with maps showing nanodomains differentiated by their stiffness and adhesion to the tip. Topography images of dry films revealed a morphology formed by droplets distributed on the substrate. Adhesion and stiffness images with good lateral resolution show droplets containing polymer and surfactant contrasting with the substrate and also nanosized heterogeneities inside these droplets. They also revealed very small dewetted structures which could not be observed in the topography map by noncontact AFM. Adhesion interactions between the AFM tip and the polymer or the dewetted mica substrate were measured in terms of adhesion force and detachment energy, and can be used as new information to understand dewetting patterns containing silica particles, PNIPAM, and SDS. Other surface mechanical parameters such as stiffness, maximum indentation, hardness, compliance, hysteresis, and Young's modulus were obtained by sampling many points and used to characterize the PNIPAM/SDS films formed in the dewetting process.

Smart core/shell nanocomposites: intelligent polymers modified gold nanoparticles

Recently, the polymer modified gold nanoparticles have showed much potential in advanced materials. In this paper, the smart core/shell nanocomposites of intelligent polymers and gold nanoparticles were reviewed from the preparation, properties to potential applications. The main preparative methods were detailed including the direct-synthesis method, "graft-to" strategy, "graft-from" strategy and physical adsorption method, in which the surface-initiated radical polymerization such as atom-transfer radical polymerization and reversible-addition fragmentation chain-transfer radical polymerization displayed several advantages for well-defined nanostructures. The stimuli-responsive property and potential uses of such-fabricated nanocomposites were sorted to thermosensitive, pH responsive and other responsive catalogues to describe more clarified. In application, the combination of gold nanoparticles and intelligent polymers provides a facile path for intelligent materials and might be encouraged to hold enormous chances in biotechnology and nanotechnology.

Structured and gradient polymer brushes from biphenylthiol self-assembled monolayers by self-initiated photografting and photopolymerization (SIPGP)

The self-initiated photografting and photopolymerization (SIPGP) of styrene, methyl methacrylate, and tert-butyl methacrylate on structured self-assembled monolayers (SAMs) of electron beam cross-linked omega-functionalized biphenylthiols SAMs on gold was investigated. Polymer brushes with defined thickness can be prepared on crosslinked benzyl-, phenyl-, hydroxyl-, and amino-functionalized SAMs, whereas non-cross-linked SAM regions desorb from the surface during the SIPGP process. By the preparation of brush gradients on different functionalized SAMs, it was demonstrated that the resulting polymer brush layer thickness is determined by the locally applied electron beam dosage. Defined micro-nanostructured polymer brush patterns can be prepared down to a size of 50 nm. Finally, it was shown that polymer brushes obtained by the SIPGP process have a branched architecture.

Hierarchical nanostructure generated by decorating SiO(x) nanowires with CoPt nanoparticles

Silicon oxide nanowires were decorated with magnetically hard 3-5 nm-sized CoPt nanoparticles using a simple physical deposition system without any pretreatment of the nanowire surface. High curvature of the nanowire surface together with the weak metal-substrate interaction helped to maintain discrete particle morphology with spherical shapes during deposition. The weak interaction also allowed the preferential nucleation of the deposited film on the pre-existing particles so that the film deposition can be repeated in order to increase the particle size without significantly altering the particle morphology. We expect that this method can be easily extended to create other metal nanoparticle-decorated nanowires.