Functionalization of amorphous SiO₂ and 6H-SiC(0001) surfaces with benzo[ghi]perylene-1,2-dicarboxylic anhydride via an APTES linker

Evaluation of covalent coupling strategies for immobilizing ligands on silica colloidal crystal films by optical interferometry

Immobilizing ligands is a crucial part of preparing optical sensors and directly connected to the sensitivity, stability, and other characteristics of sensors. In this work, an ordered porous layer interferometry (OPLI) system that can monitor the covalent coupling process of ligands in real time was developed. Films of silica colloidal crystal (SCC), as optical interference substrates, were surface modified by three different reagents: chloroacetic acid, glutaric anhydride, and carboxymethyl dextran. Staphylococcus aureus protein A (SPA), the ligand, was immobilized on SCC films. The covalent coupling process of SPA and SCC films can be dynamically monitored by the OPLI system. In addition, the three different strategies were evaluated by comparing the efficiency of the sensors prepared by different methods for binding Immunoglobulin G (IgG). The glutaric anhydride-modified sensor offers apparent advantages in terms of bound IgG quantity and affinity. This system provides a simple and intuitive way to determine the efficiency of different covalent coupling strategies. Furthermore, the sensor covalently coupled with SPA also excels in the determination of IgG content in complex systems such as milk. At the same time, the covalent coupling gives the sensor the ability to be stored stably over time.

Development of high-performance mixed matrix reverse osmosis membranes by incorporating aminosilane-modified hydrotalcite

Thin film nanocomposite (TFN) reverse osmosis (RO) membranes were prepared by dispersing 3-aminopropyltriethoxysilane (APTES) modified hydrotalcite (HT), designated as A-HT, in aqueous solution and incorporating the nanoparticles in polyamide layers during the interfacial polymerization process. Results of Fourier transform infrared spectroscopy and zeta potential characterization showed the successful modification of nanoparticles by APTES. In addition, Fourier transform infrared spectroscopy suggested that amidation would take place between the aminosilane on APTES and trimesoyl chloride in organic solution, providing firm covalent interaction between the nanoparticles and polyamide matrix. Dynamic light scattering and transmission electron microscopy indicated that aminosilane modification improved dispersibility of the nanoparticles in aqueous solution and obtained membranes, which suppressed the aggregation. Both the covalent interaction and aggregation suppression were beneficial to compatibility between nanoparticles and the polyamide matrix. TFN RO membranes incorporated with A-HT demonstrated excellent performance. Compared with the pristine RO membrane, the water flux of A-HT-0.050 prepared with an optimum A-HT concentration of 0.050 wt% was enhanced by 18.6% without sacrificing the salt rejection. Moreover, the selectivity of A-HT-0.050 was superior to that of HT-0.050 prepared with HT of 0.050 wt%, which proved aminosilane modification of hydrotalcite was beneficial to high membrane performance especially to selectivity.

Thin film nanocomposite reverse osmosis membranes were prepared by dispersing 3-aminopropyltriethoxysilane modified hydrotalcite in aqueous solution and incorporating the nanoparticles in polyamide layer during interfacial polymerization process.

Direct real-time detection of single proteins using silicon nanowire-based electrical circuits

We present an efficient strategy through surface functionalization to build a single silicon nanowire field-effect transistor-based biosensor that is capable of directly detecting protein adsorption/desorption at the single-event level. The step-wise signals in real-time detection of His-tag F₁-ATPases demonstrate a promising electrical biosensing approach with single-molecule sensitivity, thus opening up new opportunities for studying single-molecule biophysics in broad biological systems.

Flavonoid-modified surfaces: multifunctional bioactive biomaterials with osteopromotive, anti-inflammatory, and anti-fibrotic potential

Flavonoids are small polyphenolic molecules of natural origin with antioxidant, anti-inflammatory, and antibacterial properties. Here, a bioactive surface based on the covalent immobilization of flavonoids taxifolin and quercitrin on titanium substrates is presented, using (3-aminopropyl)triethoxysilane (APTES) as coupling agent. FTIR and XPS measurements confirm the grafting of the flavonoids to the surfaces. Using 2-aminoethyl diphenylborinate (DPBA, a flavonoid-specific dye), the modified surfaces are imaged by fluorescence microscopy. The bioactivity of the flavonoid-modified surfaces is evaluated in vitro with human umbilical cord derived mesenchymal stem cells (hUC-MSCs) and human gingival fibroblasts (HGFs) and compared to that of simple flavonoid coatings prepared by drop casting. Flavonoid-modified surfaces show anti-inflammatory and anti-fibrotic potential on HGF. In addition, Ti surfaces covalently functionalized with flavonoids promote the differentiation of hUC-MSCs to osteoblasts--enhancing the expression of osteogenic markers, increasing alkaline phosphatase activity and calcium deposition; while drop-casted surfaces do not. These findings could have a high impact in the development of advanced implantable medical devices like bone implants. Given the broad range of bioactivities of flavonoid compounds, these surfaces are ready to be explored for other biomedical applications, e.g., as stent surface or tumor-targeted functionalized nanoparticles for cardiovascular or cancer therapies.

Effective activation of halloysite nanotubes by piranha solution for amine modification via silane coupling chemistry

Piranha solution is shown to be an effective agent in activating the surface of HNTs for silanization modification.

Carbonate hydroxyapatite functionalization: a comparative study towards (bio)molecules fixation

Different methods for the functionalization of carbonate hydroxyapatite granules with free amine groups by reaction with (3-aminopropyl)triethoxysilane (APTES) have been compared in order to improve the potential for tethering of bioactive molecules to bioceramics. The combined use of tetraethoxyorthosilicate and APTES with acid catalysis resulted in an evident increase in amine surface grafting.

Silicon carbide: a versatile material for biosensor applications

Silicon carbide (SiC) has been around for more than 100 years as an industrial material and has found wide and varied applications because of its unique electrical and thermal properties. In recent years there has been increased attention to SiC as a viable material for biomedical applications. Of particular interest in this review is its potential for application as a biotransducer in biosensors. Among these applications are those where SiC is used as a substrate material, taking advantage of its surface chemical, tribological and electrical properties. In addition, its potential for integration as system on a chip and those applications where SiC is used as an active material make it a suitable substrate for micro-device fabrication. This review highlights the critical properties of SiC for application as a biosensor and reviews recent work reported on using SiC as an active or passive material in biotransducers and biosensors.

Modulation of charge conduction in ZnO nanowires through selective surface molecular functionalization

Two-terminal devices were fabricated using unintentionally doped Zinc Oxide (ZnO) nanowires (NW) grown via a chemical vapor deposition technique to study the influence of surface functionalization on their transport properties. Organic molecules with differing functional groups demonstrated contrasting effects on the charge transport of the nanowires depending on the polarity and orientation of the molecules.