Graphene-based nafion nanocomposite membranes: enhanced proton transport and water retention by novel organo-functionalized graphene oxide nanosheets

Quaternized Graphene for High-Performance Moisture Swing Direct Air Capture of CO2

Nowadays, moisture-swing adsorption technology still relies on quaternary ammonium resins with limited CO2 capacity under ambient air conditions. In this work, a groundbreaking moisture-driven sorbent is developed starting from commercial graphene flakes and using glycidyltrimethylammonium chloride for incorporation of CO2-sensitive quaternary ammonium functional groups. Boasting an outstanding CO2 capture performance under ultra-diluted conditions (namely, 3.24 mmol g-1 at CO2 400 ppm and 20% RH), the functionalized sorbent (fGO) features clear competitive advantages over current technologies for direct air capture. Notably, fGO demonstrated unprecedented moisture-swing capacity, ease of regenerability, versatility, selectivity, and longevity. These distinctive features position the fGO as an advanced and promising solution, showcasing its potential to outperform existing methods for moisture-swing direct air capture of CO2.

Pore size engineering of cost-effective all-nanoporous multilayer membranes for propane/propylene separation

In this study, a new multi-layer hybrid nanocomposite membrane named MFI/GO/ZIF-8 has been synthesized. This membrane combines three nanoporous materials with different morphologies in one membrane without using polymer materials. This allows access to a previously accessible region of very high permeability and selectivity properties. In addition to introducing a new and efficient MFI/GO/ZIF-8 membrane in this work, controlling the pore size of the zeolite layer has been investigated to increase the selectivity and permeability of propylene. The membrane was made using a solvent-free hydrothermal method and a layer-by-layer deposition method. To control the pore size of the MFI layer, a two-step synthesis strategy has been implemented. In the first step, three key parameters, including crystallization time, NaOH concentration and aging time of initial suspension, are controlled. In the second step, the effect of three additional parameters including hydrothermal time, hydrothermal temperature and NH4F concentration has been investigated. The results show that the optimal pore size has decreased from 177.8 nm to 120.53 nm (i.e., 32.2%). The MFI/GO/ZIF-8 membrane with fine-tuned crystal size in the zeolite layer was subjected to detailed tests for propylene selectivity and permeability. The structural characteristics of the membrane were also performed using FT-IR, XRD, FESEM and EDS techniques. The results show that the synergistic interaction between the three layers in the nanocomposite membrane significantly improves the selectivity and permeability of propylene. The permeability and selectivity of propylene increased from 50 to 60 GPU and from 136 to 177, respectively, before and after precise crystal size control. MFI/GO/ZIF-8 membrane by controlling the pore size of the zeolite layer shows a significant increase of 23.1% in selectivity and 16.7% in propylene permeability compared to the initial state. Also, due to the precise synthesis method, the absence of solvent and the use of cheap support, the prepared membrane is considered an environmentally friendly and low-cost membrane. This study emphasizes the potential of increasing the selectivity and permeability of propylene in the MFI/GO/ZIF-8 hybrid membrane by controlling the crystal size of the zeolite layer.

Fabrication and prospective applications of graphene oxide-modified nanocomposites for wastewater remediation

Water bodies have become polluted with heavy metals and hazardous contaminants as a result of fast development. Many strategies have been devised by researchers in order to remove hazardous contaminants from the aquatic environment. Utilizing graphene oxide-based composite materials as efficient adsorbents for waste water treatment, desalination, separation, and purification is gaining attraction nowadays. Some of their defining properties are high mechanical strength, hydrophilicity, remarkable flexibility, ease of synthesis, atomic thickness, and compatibility with other materials. In water treatment, high separation performance and stable graphene-based laminar structures have been the main goals. Magnetic separation is among the methods which received a lot of attention from researchers since it has been shown to be quite effective at removing harmful pollutants from aqueous solution. Graphene oxide-modified nanocomposites have provided optimal performance in water purification. This review article focusses on the fabrication of GO, rGO and MGO nanocomposites as well as the primary characterization tools needed to assess the physiochemical and structural properties of graphene-based nanocomposites. It also discusses the approaches for exploiting graphene oxide (GO), reduced graphene (rGO), and magnetic graphene oxide (MGO) to eliminate contaminants for long-term purification of water. The potential research hurdles for using fabricated MGOs as an adsorbent to remediate water contaminants like hazardous metals, radioactive metal ions, pigments, dyes, and agricultural pollutants are also highlighted.

Synthesis and chacterization of graphene-based materials (GO, rGO, and MGO) by FT-IR, XRD, UV-VIS, SEM, and Raman spectroscopy, and their potential applications for wastewater treatment.

Preparation and performance of sulfonated poly(ether ether ketone) membranes enhanced with ammonium ionic liquid and graphene oxide

The exploration of proton exchange membranes with excellent performance has always been under focus for improving the performance of proton exchange membrane fuel cells. In this study, novel ternary composite proton exchange membranes based on sulfonated poly(ether ether ketone) (SPEEK), triethylamine phosphate (TEAP) as the ammonium ionic liquid (AIL), and graphene oxide (GO) were prepared. The prepared membranes were characterized for their physical, physico-chemical, structural, morphological, thermal, mechanical, and electrical characteristics. The thermal stability of the SPEEK membrane was improved by the addition of GO and TEAP. GO was inserted into the composite membrane to form proton transfer channels. The amine ions in AIL formed acid–base pairs with the sulfonic acid group, whereas the oxygen-containing group on GO formed hydrogen bonds with the phosphate group. These groups interacted with each other to form a honeycomb-like structure, which anchored the AIL in the membrane and reduced its loss, providing additional sites for proton transport at higher temperatures. The proton conductivity of the SPEEK/AIL/GO-2 membrane reached 17.345 mS/cm at 120°C, which was 2.09 times higher than that of the pristine SPEEK membrane. This study provides the possibility for better preparation of proton exchange membranes used for high-temperature proton exchange membrane fuel cells.

Potential carbon nanomaterials as additives for state-of-the-art Nafion electrolyte in proton-exchange membrane fuel cells: a concise review

Proton-exchange membrane fuel cells (PEMFCs) have received great attention as a potential alternative energy device for internal combustion engines due to their high conversion efficiency compared to other fuel cells. The main hindrance for the wide commercial adoption of PEMFCs is the high cost, low proton conductivity, and high fuel permeability of the state-of-the-art Nafion membrane. Typically, to improve the Nafion membrane, a wide range of strategies have been developed, in which efforts on the incorporation of carbon nanomaterial (CN)-based fillers are highly imperative. Even though many research endeavors have been achieved in relation to CN-based fillers applicable for Nafion, still their collective summary has rarely been reported. This review aims to outline the mechanisms involved in proton conduction in proton-exchange membranes (PEMs) and the significant requirements of PEMs for PEMFCs. This review also emphasizes the improvements achieved in the proton conductivity, fuel barrier properties, and PEMFC performance of Nafion membranes by incorporating carbon nanotubes, graphene oxide, and fullerene as additives.

Molecular dynamics study at N2/H2O-rGO interfaces for nitrogen reduction reaction

It is an emerging trend to develop synthetic ammonia via nitrogen reduction reaction(NRR) by using simple, economical and efficient catalysts under mild conditions. Due to the intrinsic rich-functional groups of the surface, its versatile tailorability and the true stability among all the two-dimensional materials, reduced graphene oxide (rGO) is drawing a rising attention of researchers to the NRR application. However, due to the hydrophobicity of C and hydrophilicity of oxygen-containing groups of rGO, the interface dynamics between rGO surface and N₂ and H₂O molecules, which are two basic precursors for catalytic NRR are still unclear up to date. Herein, we propose to explore this problem by constructing a hierarchical model for rGO-N₂/H₂O interface interaction and conducting molecular dynamics (MD) simulation at ambient conditions. We find a way to tune the function groups to maximize the adsorption of N₂ and H₂O molecules at the same time. H₂O molecules are more likely to form hydrogen bonds with oxygen-containing groups of rGO in the near range. While in the remote region, N₂ molecules tend to form non-bonding interactions with pure C atoms without oxygen-containing groups of rGO. These results will provide theoretical guidance for NRR based on rGO and rGO based materials.

A diamino-functionalized silsesquioxane pillared graphene oxide for CO2 capture

In the race for viable solutions that could slow down carbon emissions and help in meeting the climate change targets a lot of effort is being made towards the development of suitable CO₂ adsorbents with high surface area, tunable pore size and surface functionalities that could enhance selective adsorption. Here, we explored the use of silsesquioxane pillared graphene oxide for CO₂ capture; we modified silsesquioxane loading and processing parameters in order to obtain pillared structures with nanopores of the tailored size and surface properties to maximize the CO₂ sorption capacity. Powder X-ray diffraction, XPS and FTIR spectroscopies, thermal analysis (DTA/TGA), surface area measurements and CO₂ adsorption measurements were employed to characterize the materials and evaluate their performance. Through this optimisation process, materials with good CO₂ storage capacities of up to 1.7/1.5 mmol g⁻¹ at 273 K/298 K in atmospheric pressure, were achieved.

Study of the CO₂ uptake performance of silsesquioxane pillared graphene oxide prepared with different pillar loading and way of drying.

New Porous Heterostructures Based on Organo-Modified Graphene Oxide for CO2 Capture

In this work, we report on a facile and rapid synthetic procedure to create highly porous heterostructures with tailored properties through the silylation of organically modified graphene oxide. Three silica precursors with various structural characteristics (comprising alkyl or phenyl groups) were employed to create high-yield silica networks as pillars between the organo-modified graphene oxide layers. The removal of organic molecules through the thermal decomposition generates porous heterostructures with very high surface areas (≥ 500 m²/g), which are very attractive for potential use in diverse applications such as catalysis, adsorption and as fillers in polymer nanocomposites. The final hybrid products were characterized by X-ray diffraction, Fourier transform infrared and X-ray photoelectron spectroscopies, thermogravimetric analysis, scanning electron microscopy and porosity measurements. As proof of principle, the porous heterostructure with the maximum surface area was chosen for investigating its CO₂ adsorption properties.

Titanium Dioxide Grafted on Graphene Oxide: Hybrid Nanofiller for Effective and Low-Cost Proton Exchange Membranes

A nanostructured hybrid material consisting of TiO2 nanoparticles grown and stabilized on graphene oxide (GO) platelets, was synthesized and tested as nanofiller in a polymeric matrix of sulfonated polysulfone (sPSU) for the preparation of new and low-cost nanocomposite electrolytes for proton exchange membrane fuel cell (PEMFC) applications. GO-TiO2 hybrid material combines the nanoscale structure, large interfacial area, and mechanical features of a 2D, layered material, and the hygroscopicity properties of ceramic oxides, able to maintain a suitable hydration of the membrane under harsh fuel cell operative conditions. GO-TiO2 was synthetized through a new, simple, one-pot hydrothermal procedure, while nanocomposite membranes were prepared by casting using different filler loadings. Both material and membranes were investigated by a combination of XRD, Raman, FTIR, thermo-mechanical analysis (TGA and Dynamic Mechanical Analysis) and SEM microscopy, while extensive studies on the proton transport properties were carried out by Electrochemical Impedance Spectroscopy (EIS) measurements and pulse field gradient (PFG) NMR spectroscopy. The addition of GO-TiO2 to the sPSU produced a highly stable network, with an increasing of the storage modulus three-fold higher than the filler-free sPSU membrane. Moreover, the composite membrane with 3 wt.% of filler content demonstrated very high water-retention capacity at high temperatures as well as a remarkable proton mobility, especially in very low relative humidity conditions, marking a step ahead of the state of the art in PEMs. This suggests that an architecture between polymer and filler was created with interconnected routes for an efficient proton transport.

A facile approach to hydrophilic oxidized fullerenes and their derivatives as cytotoxic agents and supports for nanobiocatalytic systems

A facile, environment-friendly, versatile and reproducible approach to the successful oxidation of fullerenes (oxC₆₀) and the formation of highly hydrophilic fullerene derivatives is introduced. This synthesis relies on the widely known Staudenmaier’s method for the oxidation of graphite, to produce both epoxy and hydroxy groups on the surface of fullerenes (C₆₀) and thereby improve the solubility of the fullerene in polar solvents (e.g. water). The presence of epoxy groups allows for further functionalization via nucleophilic substitution reactions to generate new fullerene derivatives, which can potentially lead to a wealth of applications in the areas of medicine, biology, and composite materials. In order to justify the potential of oxidized C₆₀ derivatives for bio-applications, we investigated their cytotoxicity in vitro as well as their utilization as support in biocatalysis applications, taking the immobilization of laccase for the decolorization of synthetic industrial dyes as a trial case.

UiO-66 derivatives and their composite membranes for effective proton conduction

As newly emerging proton-conducting materials, metal-organic frameworks (MOFs) have been attracting wide attention in the field of proton exchange membrane fuel cells. However, for most of the MOF materials, long-term stability is a huge obstacle for practical applications. So, the structural stability of MOFs is the critical prerequisite for the design and development of modified materials with excellent proton conductivity. In this review, stable UiO-66 derivatives were chosen as the research object, and modification methods including post-synthesis modification and hybridization were mainly summarized. Based on the reported typical functionalization strategies, we found that the modified UiO-66 derivatives and their composite membranes demonstrate ultra-high proton conductivity similar to that of commercial Nafion, indicating their great application potential in fuel cells. This Frontier article focuses on the recent development in the modification of UiO-66 type frameworks and their composite membranes and the tuning of proton conductivity with structural factors.

Enzymatic Conversion of Oleuropein to Hydroxytyrosol Using Immobilized β-Glucosidase on Porous Carbon Cuboids

In the present study, we developed novel β-glucosidase-based nano-biocatalysts for the bioconversion of oleuropein to hydroxytyrosol. Using non-covalent or covalent immobilization approaches, β-glucosidases from almonds and Thermotoga maritima were attached for the first time on oxidized and non-oxidized porous carbon cuboids (PCC). Various methods were used for the characterization of the bio-nanoconjugates, such as Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and fluorescence spectroscopy. The oxidation state of the nanο-support and the immobilization procedure play a key role for the immobilization efficiency or the catalytic activity of the immobilized β-glucosidases. The nano-biocatalysts were successfully used for the hydrolysis of oleuropein, which leads to the formation of its bioactive derivative, hydroxytyrosol (up to 2.4 g L-1), which is a phenolic compound with numerous health benefits. The bio-nanoconjugates exhibited high thermal and operational stability (up to 240 hours of repeated use), which indicated that they are efficient tools for various bio-transformations.

Applicability of a New Sulfonated Pentablock Copolymer Membrane and Modified Gas Diffusion Layers for Low-Cost Water Splitting Processes

The aim of this work is to evaluate the possible use of Nexar™ polymer, a sulfonated pentablock copolymer (s-PBC), whose structure is formed by tert-butyl styrene, hydrogenated isoprene, sulfonated styrene, hydrogenated isoprene, and tert-butyl styrene (tBS-HI-SS-HI-tBS), as a more economical and efficient alternative to Nafion® membrane for proton exchange membrane (PEM) electrolysis cells. Furthermore, we have studied a new methodology for modification of gas diffusion layers (GDL) by depositing Pt and TiO2 nanoparticles at the cathode and anode side, respectively, and a protective polymeric layer on their surface, allowing the improvement of the contact with the membrane. Morphological, structural, and electrical characterization were performed on the Nexar™ membrane and on the modified GDLs. The use of modified GDLs positively affects the efficiency of the water electrolysis process. Furthermore, Nexar™ showed higher water uptake and conductivity with respect to Nafion®, resulting in an increased amount of current generated during water electrolysis. In conclusion, we show that Nexar™ is an efficient and cheaper alternative to Nafion® as the proton exchange membrane in water splitting applications and we suggest a possible methodology for improving GDLs’ properties. These results meet the urgent need for low-cost materials and processes for hydrogen production.

Progress of Nanocomposite Membranes for Water Treatment

The use of membrane-based technologies has been applied for water treatment applications; however, the limitations of conventional polymeric membranes have led to the addition of inorganic fillers to enhance their performance. In recent years, nanocomposite membranes have greatly attracted the attention of scientists for water treatment applications such as wastewater treatment, water purification, removal of microorganisms, chemical compounds, heavy metals, etc. The incorporation of different nanofillers, such as carbon nanotubes, zinc oxide, graphene oxide, silver and copper nanoparticles, titanium dioxide, 2D materials, and some other novel nano-scale materials into polymeric membranes have provided great advances, e.g., enhancing on hydrophilicity, suppressing the accumulation of pollutants and foulants, enhancing rejection efficiencies and improving mechanical properties and thermal stabilities. Thereby, the aim of this work is to provide up-to-date information related to those novel nanocomposite membranes and their contribution for water treatment applications.

Toxicity Evaluation of Graphene Oxide and Titania Loaded Nafion Membranes in Zebrafish

The use of nanomaterials in several application fields has received in the last decades a great attention due to their peculiar properties, but also raised many doubts about possible toxicity when these materials are used for some specific applications, such as water purification. Indeed a careful investigation is needed in order to exclude possible harmful side effects related to the use of nanotechnology. Nanoparticles effects on the marine organisms may depend on their chemical composition, size, surface structure, solubility, shape and how the individual nanoparticles aggregate together. In order to make the most of their potential, without polluting the environment, many researchers are trying to trap them into some kind of matrix that keeps them active but avoids their dispersion in the environment. In this study we have tested nanocomposite membranes prepared using Nafion polymer combined with various fillers, such as anatase-type TiO2 nanoparticles and graphene oxide. The non-toxicity of these nanocomposites, already shown to be effective for water purification applications in our previous studies, was recognized by testing the effect of the different materials on zebrafish embryos. Zebrafish was considered an excellent model for ecotoxicological studies and for this motivation zebrafish embryos were exposed to different concentrations of free nanoparticles and to the nanocomposite membranes. As biomarkers of exposure, we evaluated the expression of heme-oxygenase 1 and inducible Nitric Oxide Synthases by immunohistochemistry and gene expression. Embryo toxicity test showed that nor sublethal effects neither mortality were caused by the different nanoparticles and nano-systems tested. Only zebrafish larvae exposed to free nanoparticles have shown a different response to antibodies anti-heme-oxygenase 1 and anti- inducible Nitric Oxide Synthases. The immunolocalization analysis in fact has highlighted an increase in the synthesis of these biomarkers.

Rational Design of S-UiO-66@GO Hybrid Nanosheets for Proton Exchange Membranes with Significantly Enhanced Transport Performance

Metal-organic frameworks (MOFs) are being intensively explored as filler materials for polymeric proton exchange membranes (PEMs) due to their potentials for the systematic design and modification of proton-conducting properties. S-UiO-66, a stable MOF with functional groups of -SO₃H in its ligands, was selected here to prepare S-UiO-66@graphene oxide (GO) hybrid nanosheets via a facile in situ growth procedure, and then a series of composite PEMs were prepared by hybridizing S-UiO-66@GO and sulfonated poly(ether ether ketone) (SPEEK). The resultant hybrid nanosheets not only possessed abundant -SO₃H groups derived from the ligands of S-UiO-66 but also yielded a uniform dispersion of S-UiO-66 onto GO nanosheets, thus effectively eliminating the agglomeration of S-UiO-66 in the membrane matrix. Thanks to the well-tailored chemical composition and nanostructure of S-UiO-66@GO, the as-prepared SPEEK/S-UiO-66@GO composite PEMs present a significant increase in their proton conductivity under various conditions. In particular, the proton conductivity of the SPEEK/S-UiO-66@GO-10 membrane was up to 0.268 S·cm^-1 and 16.57 mS·cm^-1 at 70 °C-95% RH and 100 °C-40% RH (2.6 and 6.0 times that of recast SPEEK under the same condition), respectively. Moreover, the mechanical property of composite membranes was substantially strengthened and the methanol penetration was well-suppressed. Our investigation indicates the great potential of S-UiO-66@GO in fabricating composite PEMs and also reveals that the high proton conductivity of MOFs can be fully utilized by means of MOF/polymer composite membranes.

Graphene oxide based nanohybrid proton exchange membranes for fuel cell applications: An overview

In the context of many applications, such as polymer composites, energy-related materials, sensors, 'paper'-like materials, field-effect transistors (FET), and biomedical applications, chemically modified graphene was broadly studied during the last decade, due to its excellent electrical, mechanical, and thermal properties. The presence of reactive oxygen functional groups in the grapheme oxide (GO) responsible for chemical functionalization makes it a good candidate for diversified applications. The main objectives for developing a GO based nanohybrid proton exchange membrane (PEM) include: improved self-humidification (water retention ability), reduced fuel crossover (electro-osmotic drag), improved stabilities (mechanical, thermal, and chemical), enhanced proton conductivity, and processability for the preparation of membrane-electrode assembly. Research carried on this topic may be divided into protocols for covalent grafting of functional groups on GO matrix, preparation of free-standing PEM or choice of suitable polymer matrix, covalent or hydrogen bonding between GO and polymer matrix etc. Herein, we present a brief literature survey on GO based nano-hybrid PEM for fuel cell applications. Different protocols were adopted to produce functionalized GO based materials and prepare their free-standing film or disperse these materials in various polymer matrices with suitable interactions. This review article critically discussed the suitability of these PEMs for fuel cell applications in terms of the dependency of the intrinsic properties of nanohybrid PEMs. Potential applications of these nanohybrid PEMs, and current challenges are also provided along with future guidelines for developing GO based nanohybrid PEMs as promising materials for fuel cell applications.

One-Pot Green Synthesis of Graphene Nanosheets Encapsulated Gold Nanoparticles for Sensitive and Selective Detection of Dopamine

We report a simple new approach for green preparation of gallic acid supported reduced graphene oxide encapsulated gold nanoparticles (GA-RGO/AuNPs) via one-pot hydrothermal method. The as-prepared composites were successfully characterized by using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray powder diffraction techniques (XRD), scanning electron microscope (SEM), high resolution transmission electron microscopy (HRTEM) and elemental analysis. The GA-RGO/AuNPs modified electrode behaves as a hybrid electrode material for sensitive and selective detection of dopamine (DA) in presence of ascorbic acid (AA) and uric acid (UA). The GA-RGO/AuNPs modified electrode displays an excellent electrocatalytic activity towards the oxidation of DA and exhibits a wide linear response range over the DA concentrations from 0.01-100.3 μM with a detection limit (LOD) of 2.6 nM based on S/N = 3. In addition, the proposed sensor could be applied for the determination of DA in human serum and urine samples for practical analysis.

A facile approach to fabricating organosilica layered material with sulfonic groups as an efficient filler for polymer electrolyte nanocomposites

One-pot synthesis of silica layered nanofillers decorated by sulfonic groups and their use for nafion nanocomposites with improved conductivity.

Covalently Functionalized Graphene by Radical Polymers for Graphene-Based High-Performance Cathode Materials

Polymer-functionalized graphene sheets play an important role in graphene-containing composite materials. Herein, functionalized graphene sheets covalently linked with radical polymer, graphene-graft-poly(2,2,6,6-tetramethylpiperidin-1-oxyl-4-yl methacrylate) (G-g-PTMA), were prepared via surface-initiated atom transfer radical polymerization (SI-ATRP). A composite cathode with G-g-PTMA as major active material and reduced graphene oxide (RGO) as conductive additive was fabricated via a simple dispersing-depositing process, and this composite cathode exhibited a relatively high specific capacity up to 466 mAh g(-1) based on the mass of PTMA, which is much higher than the theoretical capacity of PTMA. This extraordinary electrochemical performance is attributed to the fast one-electron redox reaction of G-g-PTMA and surface Faradaic reaction of RGO boosted by G-g-PTMA, which suggested that G-g-PTMA sheets play a dual role in the composite materials, that is, on the one hand provided the fast one-electron redox reaction of PTMA and on the other hand worked as nanofiller for facilitating the surface Faradaic reaction-based lithium storage of RGO.

Laccase-Functionalized Graphene Oxide Assemblies as Efficient Nanobiocatalysts for Oxidation Reactions

Multi-layer graphene oxide-enzyme nanoassemblies were prepared through the multi-point covalent immobilization of laccase from Trametes versicolor (TvL) on functionalized graphene oxide (fGO). The catalytic properties of the fGO-TvL nanoassemblies were found to depend on the number of the graphene oxide-enzyme layers present in the nanostructure. The fGO-TvL nanoassemblies exhibit an enhanced thermal stability at 60 °C, as demonstrated by a 4.7-fold higher activity as compared to the free enzyme. The multi-layer graphene oxide-enzyme nanoassemblies can efficiently catalyze the oxidation of anthracene, as well as the decolorization of an industrial dye, pinacyanol chloride. These materials retained almost completely their decolorization activity after five reaction cycles, proving their potential as efficient nano- biocatalysts for various applications.

Cationic and anionic azo-dye removal from water by sulfonated graphene oxide nanosheets in Nafion membranes

The use of graphene oxide flakes functionalized with 3-amino-1-propanesulfonic acid (GO_SULF), as a powder or incorporated into a Nafion membrane, for the removal of cationic and anionic dyes is studied.

Facile preparation and multifunctional applications of boron nitride quantum dots

Boron nitride quantum dots are obtained by a facile sonication-solvothermal technique. They are proven to be promising fluorescent bioimaging probes for bioimaging with remarkably low cytotoxicity and easily integrated into high-performance proton exchange membranes. This work will probably trigger research interest in BN and its new applications in a variety of fields.

Stabilization of Phenolic Radicals on Graphene Oxide: An XPS and EPR Study

A graphene oxide-gallic acid hybrid material was synthesized by the immobilization of gallic acid (3,4,5-trihydroxobenzoic acid) on graphene oxide. The grafting was achieved via the formation of amide bonds between the amine groups on the organofunctionalized graphite oxide surface and the carboxyl groups of the gallic acid molecules. The EPR signal of the gallic acid radicals in this hybrid material remained almost unaltered over at least 500 days, with less than 3% signal decay over that period, pointing to the truly remarkable stability of these radicals. The produced material was characterized by Fourier transform infrared, X-ray photoelectron, and electron paramagnetic resonance spectroscopies as well as by thermogravimetric analysis and the Kaiser test. The stability of the radicals in the material was studied in powder form and in aqueous solution vs pH. We demonstrate that in the graphene oxide-gallic acid hybrid material a radical is favorably stabilized on the ring-O while the oxidation of the second OH is precluded, and this results in long-term stabilization of the gallic acid radicals in solid hybrid material. Thus, in applications where it will be used under O2-free and humidity-free conditions, the graphene oxide-gallic acid hybrid material is a reliable spintronics scaffold.