Cyclodextrin insulation prevents static quenching of conjugated polymer fluorescence at the single molecule level

Conformational Heterogeneity and Interchain Percolation Revealed in an Amorphous Conjugated Polymer

Conjugated polymers are employed in a variety of application areas due to their bright fluorescence and strong biocompatibility. However, understanding the structure of amorphous conjugated polymers on the nanoscale is extremely challenging compared to their related crystalline phases. Using a bespoke classical force field, we study amorphous poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) with molecular dynamics simulations to investigate the role that its nanoscale structure plays in controlling its emergent (and all-important) optical properties. Notably, we show that a giant percolating cluster exists within amorphous F8BT, which has ramifications in understanding the nature of interchain species that drive the quantum yield reduction and bathochromic shift observed in conjugated polymer-based devices and nanostructures. We also show that distinct conformations can be unravelled from within the disordered structure of amorphous F8BT using a two-stage machine learning protocol, highlighting a link between molecular conformation and ring stacking propensity. This work provides predictive understanding by which to enhance the optical properties of next-generation conjugated polymer-based devices and materials by rational, simulation-led design principles.

Fabrication of Robust and Porous Lead Chloride-Based Metal-Organic Frameworks toward a Selective and Sensitive Smart NH3 Sensor

Organolead halide materials have shown promising optoelectronic properties that are suitable for light-emitting diodes (e.g., strong photoluminescence, narrow emission width, and high charge carrier mobility). However, the vast majority of them have no open porosity or open metal sites for host-guest interactions and are therefore not widely applicable in intrinsic fluorescent sensing of small molecules. Herein, we report a lead chloride-based metal-organic framework (MOF) with high porosity and stability and promising photoluminescent characteristics, performing as a sensitive, selective, and long-term stable fluorescence probe for NH3. For the first time, a homemade dynamic real-time photoluminescence monitoring system was developed, which showed that our haloplumbate-based MOF has an immediate response and an extremely low limit of detection (12 ppm) toward NH3. A variety of experimental characterization and theoretical calculations evidenced that the photoluminescence quenching was ascribed to the coordination between NH3 guests and exposed Pb2+ centers in MOFs. Moreover, a portable on-site smart NH3 detector was designed based on this haloplumbate-MOF using a 3D printer, and the quantitative recovery experiment demonstrated the effective detection of NH3 in the range of 15-150 ppm. This study opens a new pathway to design organolead halide-based MOFs to perform on-site chemical sensing of small molecules and shows their high potential to monitor safety concentrations of NH3 in different industrial sites.

Effect of chlorophyll fluorescence quenching on quantitative analysis of adulteration in extra virgin olive oil

Extra virgin olive oil (EVOO) is both edible oil and health care product. Adulteration in high quality vegetable oil is a ubiquitous fraud, especially in the market of EVOO. Spectroscopy is an effective means to realize the rapid detection of adulteration in EVOO, but the accuracy of quantitative analysis is the short board of spectral detection. Traditional Raman spectroscopy is used to detect the adulteration of EVOO by analyzing the content of monounsaturated fatty acids. However, high oleic acid content is not unique to EVOO. Confocal Raman and Fluorescence Spectroscopy (CRFS) was employed to characterize EVOO along with potential adulterant oils based on their Oleic acid and photosensitive substances content. Statistical analysis of these Oleic acid and photosensitive substances using Multiple Linear Regression (MLR) allowed for a rapid approach to determine EVOO authenticity. The quantitative analysis model of adulteration in EVOO was established using this approach, and the RMSE was 0.0068, and the R-Squaredof external Prediction was 0.9996. In addition, Fluorescence quenching which interfered with the quantitative analysis of chlorophyll was found in the adulteration experiment of EVOO. Compared to traditional Raman methods, CRFS with MLR involves minimal sample preparation combined with fast analysis.

Confinement of Dyes inside Boron Nitride Nanotubes: Photostable and Shifted Fluorescence down to the Near Infrared

Fluorescence is ubiquitous in life science and used in many fields of research ranging from ecology to medicine. Among the most common fluorogenic compounds, dyes are being exploited in bioimaging for their outstanding optical properties from UV down to the near IR (NIR). However, dye molecules are often toxic to living organisms and photodegradable, which limits the time window for in vivo experiments. Here, it is demonstrated that organic dye molecules are passivated and photostable when they are encapsulated inside a boron nitride nanotube (dyes@BNNT). The results show that the BNNTs drive an aggregation of the encapsulated dyes, which induces a redshifted fluorescence from visible to NIR-II. The fluorescence remains strong and stable, exempt of bleaching and blinking, over a time scale longer than that of free dyes by more than 10⁴ . This passivation also reduces the toxicity of the dyes and induces exceptional chemical robustness, even in harsh conditions. These properties are highlighted in bioimaging where the dyes@BNNT nanohybrids are used as fluorescent nanoprobes for in vivo monitoring of Daphnia Pulex microorganisms and for diffusion tracking on human hepatoblastoma cells with two-photon imaging.

Synchronous sensing of three conserved sequences of Zika virus using a DNAs@MOF hybrid: experimental and molecular simulation studies

A metal–organic framework of Cu(ii) has been prepared and impregnated with three dye-labeled DNA sequences. The hybrid material formed is capable of synchronous detection of three conserved Zika virus RNA sequences.

Fluorescence polarization measures energy funneling in single light-harvesting antennas--LH2 vs conjugated polymers

Numerous approaches have been proposed to mimic natural photosynthesis using artificial antenna systems, such as conjugated polymers (CPs), dendrimers, and J-aggregates. As a result, there is a need to characterize and compare the excitation energy transfer (EET) properties of various natural and artificial antennas. Here we experimentally show that EET in single antennas can be characterized by 2D polarization imaging using the single funnel approximation. This methodology addresses the ability of an individual antenna to transfer its absorbed energy towards a single pool of emissive states, using a single parameter called energy funneling efficiency (ε). We studied individual peripheral antennas of purple bacteria (LH2) and single CP chains of 20 nm length. As expected from a perfect antenna, LH2s showed funneling efficiencies close to unity. In contrast, CPs showed lower average funneling efficiencies, greatly varying from molecule to molecule. Cyclodextrin insulation of the conjugated backbone improves EET, increasing the fraction of CPs possessing ε = 1. Comparison between LH2s and CPs shows the importance of the protection systems and the protein scaffold of LH2, which keep the chromophores in functional form and at such geometrical arrangement that ensures excellent EET.

Unusually high fluorescence quantum yield of a homopolyfluorenylazomethine--towards a universal fluorophore

The absolute fluorescence quantum yield (Φfl) of a polyfluorenyl azomethine homopolymer was measured as a function of solvent polarity. The solvent induced and temperature dependent fluorescence of the homopolymer were also investigated and they were compared to the corresponding monomer and copolymer. The Φfl of the homopolymer was consistent (45-70%), regardless of solvent polarity with Stokes shifts up to 7460 cm(-1) in ethanol. In contrast, the Φfl of its corresponding monomer decreased from 60% in ethanol to 1% in toluene, whereas a Φfl < 5% for its analogous copolymer was measured. Moderate fluorescence yields (Φfl ≈ 25%) were also possible in thin film when co-depositing the homopolymer with PMMA. Cryofluorescence was used to probe the excited state deactivation modes. Deactivation by internal conversion was found to compete with fluorescence. The fluorescence deactivation pathways of the homopolymer and its corresponding monomer could be suppressed at 77 K, resulting in fluorescence turn-on. Both fluorophores were found to detect nitroaromatics.

Inhomogeneity in the excited-state torsional disorder of a conjugated macrocycle

The photophysics of conjugated polymers has generally been explained based on the interactions between the component conjugated chromophores in a tangled chain. However, conjugated chromophores are entities with static and dynamic structural disorder, which directly affects the conjugated polymer photophysics. Here we demonstrate the impact of chain structure torsional disorder on the spectral characteristics for a macrocyclic oligothiophene 1, which is obscured in conventional linear conjugated chromophores by diverse structural disorders such as those in chromophore size and shape. We used simultaneous multiple fluorescence parameter measurement for a single molecule and quantum-mechanical calculations to show that within the fixed conjugation length across the entire ring an inhomogeneity from torsional disorder in the structure of 1 plays a crucial role in causing its energetic disorder, which affords the spectral broadening of ∼220 meV. The torsional disorder in 1 fluctuated on the time scale of hundreds of milliseconds, typically accompanied by spectral drifts on the order of ∼10 meV. The fluctuations could generate torsional defects and change the electronic structure of 1 associated with the ring symmetry. These findings disclose the fundamental nature of conjugated chromophore that is the most elementary spectroscopic unit in conjugated polymers and suggest the importance of engineering structural disorder to optimize polymer-based device photophysics. Additionally, we combined defocused wide-field fluorescence microscopy and linear dichroism obtained from the simultaneous measurements to show that 1 emits polarized light with a changing polarization direction based on the torsional disorder fluctuations.

The effect of permodified cyclodextrins encapsulation on the photophysical properties of a polyfluorene with randomly distributed electron-donor and rotaxane electron-acceptor units

We report on the synthesis as well as the optical, electrochemical and morphological properties of two polyrotaxanes (4a and 4b), which consist of electron-accepting 9,9-dicyanomethylenefluorene 1 as an inclusion complex in persilylated β- or γ-cyclodextrin (TMS-β-CD, TMS-γ-CD) (1a, 1b) and methyltriphenylamine as an electron-donating molecule. They are statistically distributed into the conjugated chains of 9,9-dioctylfluorene 3 and compared with those of the corresponding non-rotaxane 4 counterpart. Rotaxane formation results in improvements of the solubility, the thermal stability, and the photophysical properties. Polyrotaxanes 4a and 4b exhibited slightly red-shifted absorption bands with respect to the non-rotaxane 4 counterpart. The fluorescence lifetimes of polyrotaxanes follow a mono-exponential decay with a value of τ = 1.14 ns compared with the non-rotaxane, where a bi-exponential decay composed of a main component with a relative short time of τ₁ = 0.88 (57.08%) and a minor component with a longer lifetime of τ₂ = 1.56 ns (42.92%) were determined. The optical and electrochemical band gaps (ΔE_g) as well as the ionization potential and electronic affinity characterized by smaller values compared to the values of any of the constituents. AFM reveals that the film surface of 4a and 4b displays a granular morphology with a lower dispersity supported by a smaller roughness exponent compared with the non-rotaxane counterpart.

Massive enhancement of photoluminescence through nanofilm dewetting

Due to the rather low efficiencies of conjugated polymers in solid films, their successful applications are scarce. However, recently several experiments indicated that a proper control of molecular conformations and stresses acting on the polymers may provide constructive ways to boost efficiency. Here, we report an amazingly large enhancement of photoluminescence as a consequence of strong shear forces acting on the polymer chains during nanofilm dewetting. Such sheared chains exhibited an emission probability many times higher than the nonsheared chains within a nondewetted film. This increase in emission probability was accompanied by the emergence of an additional blue-shifted emission peak, suggesting reductions in conjugation length induced by the dewetting-driven mass redistribution. Intriguingly, exciton quenching on narrow-band-gap substrates was also reduced, indicating suppression of vibronic interactions of excitons. Dewetting and related shearing processes resulting in enhanced photoluminescence efficiency are compatible with existing fabrication methods of polymer-based diodes and solar cells.

Excitation polarization provides structural resolution of individual non-blinking nano-objects

We propose to combine the method of fluorescence intensity centroid localization with rotation of the plane of excitation polarization. Polarized light interacts selectively with differently oriented fluorophores; thus yielding topological information on the nanometer scale, without any need for fluorophore blinking. The method is applicable to photostable individual systems, when most of the traditional super-resolution methods fail. A theoretical study is supported by experiments on 30 nm long cyclodextrin-encapsulated single polyrotaxane conjugated polymer chains.

Inhomogeneous Quenching as a Limit of the Correlation Between Fluorescence Polarization and Conformation of Single Molecules

The photophysical properties of conjugated polymers (CPs) largely depend on the interactions between the CP and its environment. We present a study of two polymers with identical conjugated backbones, bare and insulated, that showed different fluorescence excitation modulation depth histograms. However, the polarization differences are not related to differences in conformation, as commonly believed, but to the existence of "dark" chromophores in the bare polymer that are statically quenched. This results in inhomogeneous quenching of the polymer chain that breaks the correlation between excitation fluorescence polarization and conjugated polymer chain conformation.