Dopant Control of Solution-Processed CuI:S for Highly Conductive p-Type Transparent Electrode

Copper iodide (CuI) has garnered considerable attention as a promising alternative to p-type transparent conducting oxides owing to its low cation vacancy formation energy, shallow acceptor level, and readily modifiable conductivity via doping. Although sulfur (S) doping through liquid iodination has exhibited high efficacy in enhancing the conductivity with record high figure of merit (FOM) of 630 00 MΩ-1, solution-processed S-doped CuI (CuI:S) for low-cost large area fabrication has yet to be explored. Here, a highly conducting CuI:S thin-film for p-type transparent conducting electrode (TCE) is reported using low temperature solution-processing with thiourea derivatives. The optimization of thiourea dopant is determined through a comprehensive acid-base study, considering the effects of steric hindrance. The modification of active groups of thioureas facilitated a varying carrier concentration range of 9 × 1018-2.52 × 1020 cm-3 and conductivities of 4.4-390.7 S cm-1. Consequently, N-ethylthiourea-doped CuI:S exhibited a FOM value of 7 600 MΩ-1, which is the highest value among solution-processed p-type TCEs to date. Moreover, the formulation of CuI:S solution for highly conductive p-type TCEs can be extended to CuI:S inks, facilitating high-throughput solution-processes such as inkjet printing and spray coating.

Dimension Tuning of All-Inorganic Ag-Based Metal Halides by Solvent Engineering

Dimension growth of metal halides is important for its properties and applications. However, such dimension control of the metal halides is rarely reported in the literature and the growth mechanism is not clear yet. A minute difference of solvent properties can tremendously alter the process of nucleation and growth of crystals. Herein, an intriguing phenomenon of dimension tuning for Ag-based metal halides is reported. The 1D Cs2 AgCl3 crystals can be obtained in pure DMF while the 2D CsAgCl2 crystals are obtained in pure DMSO. Both exhibit bright yellow emission, which are derived from self-trapping excitons (STEs). The photoluminescence quantum yield (PLQY) of Cs2 AgCl3 (1D) and CsAgCl2 (2D) are 28.46 % and 20.61 %, respectively. In order to understand the mechanism of the dimension change, additional solvents (N,N-dimethylacetamide, DMAC, 1,3-Dimethyl-Tetrahydropyrimidin-2(1H)-one, DMPU) are also selected to process the precursor for crystal growth. By comparing the functional group, dielectric constant, and donor number among the four solvents, we find the donor number plays the predominant role in nucleation process for Cs2 AgCl3 and CsAgCl2 . This research reveals the relationship between coordination ability of the solvent and the dimension of metal halides.

Polarization-Dependent Large Photorefractive Effect In A Wide Bandgap 2D Metal Halide Ferroelectric

Photorefractive effect of ferroelectrics refers to the light-induced change of refractive index, which is an optical controlling avenue in holographic storage and image processing. For most ferroelectrics, however, the small photorefractive effect (10-5 -10-4 ) hinders their practical application and it is urgent to exploit new photorefractive system. Here, for the first time, strong photorefractive effects are achieved in a 2D metal-halide ferroelectric, [CH3 (CH2 )3 NH3 ]2 (CH3 NH3 )Pb2 Cl7 (1), showing large spontaneous polarization (≈4.1 µC cm-2 ) and wide optical bandgap (≈3.20 eV). Notably, under light irradiation, 1 enables a large variation of refractive indices up to ≈ 1× 10-3 , being one order higher than the existing materials and comparable to the state-of-the-art inorganic ferroelectrics. This intriguing photorefractive behavior involves with the sharp variation of polarization caused by photo-pyroelectricity. As the first report of 2D metal-halide photorefractive ferroelectric, this work sheds light on optical controlling of physical properties in electric-ordered materials.

Facile Control of Ferroelectricity Driven by Ingenious Interaction Engineering

Construction of ferroelectric and optimization of macroscopic polarization has attracted tremendous attention for next generation light weight and flexible devices, which brings fundamental vitality for molecular ferroelectrics. However, effective molecular tailoring toward cations makes ferroelectric synthesis and modification relatively elaborate. Here, the study proposes a facile method to realize triggering and optimization of ferroelectricity. The experimental and theoretical investigation reveals that orientation and alignment of polar cations, dominated factors in molecular ferroelectrics, can be controlled by easily processed anionic modification. In one respect, ferroelectricity is induced by strengthened intermolecular interaction. Moreover, ≈50% of microscopic polarization enhancement (from 8.07 to 11.68 µC cm-2 ) and doubling of equivalent polarization direction (from 4 to 8) are realized in resultant ferroelectric FEtQ2ZnBrI3 (FEQZBI, FEtQ = N-fluoroethyl-quinuclidine). The work offers a totally novel platform for control of ferroelectricity in organic-inorganic hybrid ferroelectrics and a deep insight of structure-property correlations.

Unveiling the Superior Optical Properties of Novel Melamine-Based Nonlinear Optical Material with Strong Second-Harmonic Generation and Giant Optical Anisotropy

Two melamine-based metal halides, (C₃ N₆ H₇ )(C₃ N₆ H₆ )HgCl₃ (I) and (C₃ N₆ H₇ )₃ HgCl₅ (II), are synthesized by incorporating the heavy d¹⁰ cation, Hg²⁺ , and the halide anion, Cl^- . The noncentrosymmetric structure of I results from two unique attributes: large asymmetric secondary building units produced by direct covalent coordination of melamine to Hg²⁺ and a small dihedral angle between melamine molecules. The former makes inorganic modules locally acentric, while the latter prevents planar organic groups from forming deleterious antiparallel arrangement. The unique coordination in I results in an enlarged band gap of 4.40 eV. Due to the large polarizability of the heavy Hg²⁺ cation and the π-conjugated system of melamine, I exhibits a strong second-harmonic generation efficiency of 5 × KH₂ PO₄ , larger than any reported melamine-based nonlinear optical materials to date. Density functional theory calculations indicate that I possesses giant optical anisotropy, with a birefringence of 0.246@1064 nm.

Room-Temperature Fabricated Multilevel Nonvolatile Lead-Free Cesium Halide Memristors for Reconfigurable In-Memory Computing

Recently, conductive-bridging memristors based on metal halides, such as halide perovskites, have been demonstrated as promising components for brain-inspired hardware-based neuromorphic computing. However, realizing devices that simultaneously fulfill all of the key merits (low operating voltage, high dynamic range, multilevel nonvolatile storage capability, and good endurance) remains a great challenge. Herein, we describe lead-free cesium halide memristors incorporating a MoO_X interfacial layer as a type of conductive-bridging memristor. With this design, we obtained highly uniform and reproducible memristors that exhibited all-around resistive switching characteristics: ultralow operating voltages (<0.18 V), low variations (<30 mV), long retention times (>10⁶ s), high endurance (>10⁵, full on/off cycles), record-high on/off ratios (>10¹⁰, smaller devices having areas <5 × 10^-4 mm²), fast switching (<200 ns), and multilevel programming abilities (>64 states). With these memristors, we successfully implemented stateful logic functions in a reconfigurable architecture and accomplished a high classification accuracy (ca. 90%) in the simulated hand-written-digits classification task, suggesting their versatility in future in-memory computing applications. In addition, we exploited the room-temperature fabrication of the devices to construct a fully functional three-dimensional stack of memristors, which demonstrates their potential of high-density integration desired for data-intensive neuromorphic computing. High-performance, environmentally friendly cesium halide memristors provide opportunities toward next-generation electronics beyond von Neumann architectures.

Mn and Cu codoped Cs2ZnBr4metal halide with multiexcitonic emission toward anti-counterfeiting

The growing demand for optical anti-counterfeiting technology requires the development of new environmentally-friendly smart materials with single-component, multimodal fluorescence. Herein, Cs₂ZnBr₄:0.3Mn²⁺&0.15Cu⁺, as an efficient multimodal luminescent material with excitation-wavelength-dependent emission is reported. Under 365 nm and 254 nm UV light excitation, Cs₂ZnBr₄:Mn²⁺&Cu⁺emits mutually independent green light at 525 nm and blue light at 470 nm, which origin from the emission of Mn²⁺and the Cu⁺enhanced self-trapped excitons of Cs₂ZnBr₄, respectively. Furthermore, the multiexcitonic emission is applied to anti-counterfeiting applications and information encryption and decryption engineering. This codoped strategy provides a colorful step to expand the new metal halide materials in fluorescent anti-counterfeiting and information encryption and decryption.

Fabrication of Robust and Porous Lead Chloride-Based Metal-Organic Frameworks toward a Selective and Sensitive Smart NH3 Sensor

Organolead halide materials have shown promising optoelectronic properties that are suitable for light-emitting diodes (e.g., strong photoluminescence, narrow emission width, and high charge carrier mobility). However, the vast majority of them have no open porosity or open metal sites for host-guest interactions and are therefore not widely applicable in intrinsic fluorescent sensing of small molecules. Herein, we report a lead chloride-based metal-organic framework (MOF) with high porosity and stability and promising photoluminescent characteristics, performing as a sensitive, selective, and long-term stable fluorescence probe for NH3. For the first time, a homemade dynamic real-time photoluminescence monitoring system was developed, which showed that our haloplumbate-based MOF has an immediate response and an extremely low limit of detection (12 ppm) toward NH3. A variety of experimental characterization and theoretical calculations evidenced that the photoluminescence quenching was ascribed to the coordination between NH3 guests and exposed Pb2+ centers in MOFs. Moreover, a portable on-site smart NH3 detector was designed based on this haloplumbate-MOF using a 3D printer, and the quantitative recovery experiment demonstrated the effective detection of NH3 in the range of 15-150 ppm. This study opens a new pathway to design organolead halide-based MOFs to perform on-site chemical sensing of small molecules and shows their high potential to monitor safety concentrations of NH3 in different industrial sites.

Simple and Fast High-Yield Synthesis of Silver Nanowires

Silver nanowires (AgNWs) combine high electrical conductivity with low light extinction in the visible and are used in a wide range of applications, from transparent electrodes, to temperature and pressure sensors. The most common strategy for the production of AgNWs is the polyol synthesis, which always leads to the formation of silver nanoparticles as byproducts. These nanoparticles degrade the performance of AgNWs' based devices and have to be eliminated by several purification steps. Here, we report a simple and fast synthesis of AgNWs with minimal formation of byproducts, as confirmed by the spectral purity of the final solution. Our synthetic strategy relies on the use of freshly prepared AgCl and on the minimization of gas evolution inside the reaction vessel. The observed synthetic improvements can be of general validity for the polyol synthesis of metallic nanostructures of different shapes and compositions.

Influence of K2NbF7 Catalyst on the Desorption Behavior of LiAlH4

In this study, the modification of the desorption behavior of LiAlH4 by the addition of K2NbF7 was explored for the first time. The addition of K2NbF7 causes a notable improvement in the desorption behavior of LiAlH4. Upon the addition of 10 wt.% of K2NbF7, the desorption temperature of LiAlH4 was significantly lowered. The desorption temperature of the LiAlH4 + 10 wt.% K2NbF7 sample was lowered to 90°C (first-stage reaction) and 149°C (second-stage reaction). Enhancement of the desorption kinetics performance with the LiAlH4 + 10 wt.% K2NbF7 sample was substantiated, with the composite sample being able to desorb hydrogen 30 times faster than did pure LiAlH4. Furthermore, with the presence of 10 wt.% K2NbF7, the calculated activation energy values for the first two desorption stages were significantly reduced to 80 and 86 kJ/mol; 24 and 26 kJ/mol lower than the as-milled LiAlH4. After analysis of the X-ray diffraction result, it is believed that the in situ formation of NbF4, LiF, and K or K-containing phases that appeared during the heating process promoted the amelioration of the desorption behavior of LiAlH4 with the addition of K2NbF7.

Highly Efficient Organic Afterglow from a 2D Layered Lead-Free Metal Halide in Both Crystals and Thin Films under an Air Atmosphere

Organic afterglow materials (OAMs) with a lifetime longer than 0.1 s have recently received much attention for their fascinating properties meeting the critical requirements of applications in newly emerged technologies. However, the development of OAMs lags behind for their low luminescence efficiency. Usually, enhancing the phosphorescence efficiency of organic materials causes a short lifetime. Here, we report two kinds of OAMs, two-dimensional (2D) layered organic-inorganic hybrid zinc bromides (PEZB-NTA and PEZB-BPA), obtained in an environmentally friendly ethanol solvent by a low-temperature solution method. They display highly efficient and persistent luminescence in air in both crystals and thin films with phosphorescence quantum yields up to 42% in crystals and 27% in films. For OAMs, the two quantum yields are the highest values ever reported for crystals and films. Due to the excellent crystalline and film-forming ability, PEZB-NTA and PEZB-BPA in ethanol can be used as inks to construct patterns on various rigid and flexible substrates, including paper, iron, plastic, marble, tin foil, and cloth. Consequently, the novel OAMs show great application prospects in the fields of anti-counterfeiting and information storage because of their economic synthesis, solution processing, and easy operation.

Highly Tunable Colloidal Perovskite Nanoplatelets through Variable Cation, Metal, and Halide Composition

Colloidal perovskite nanoplatelets are a promising class of semiconductor nanomaterials-exhibiting bright luminescence, tunable and spectrally narrow absorption and emission features, strongly confined excitonic states, and facile colloidal synthesis. Here, we demonstrate the high degree of spectral tunability achievable through variation of the cation, metal, and halide composition as well as nanoplatelet thickness. We synthesize nanoplatelets of the form L2[ABX3]n-1BX4, where L is an organic ligand (octylammonium, butylammonium), A is a monovalent metal or organic molecular cation (cesium, methylammonium, formamidinium), B is a divalent metal cation (lead, tin), X is a halide anion (chloride, bromide, iodide), and n-1 is the number of unit cells in thickness. We show that variation of n, B, and X leads to large changes in the absorption and emission energy, while variation of the A cation leads to only subtle changes but can significantly impact the nanoplatelet stability and photoluminescence quantum yield (with values over 20%). Furthermore, mixed halide nanoplatelets exhibit continuous spectral tunability over a 1.5 eV spectral range, from 2.2 to 3.7 eV. The nanoplatelets have relatively large lateral dimensions (100 nm to 1 μm), which promote self-assembly into stacked superlattice structures-the periodicity of which can be adjusted based on the nanoplatelet surface ligand length. These results demonstrate the versatility of colloidal perovskite nanoplatelets as a material platform, with tunability extending from the deep-UV, across the visible, into the near-IR. In particular, the tin-containing nanoplatelets represent a significant addition to the small but increasingly important family of lead- and cadmium-free colloidal semiconductors.

Synthesis of PbI(2) single-layered inorganic nanotubes encapsulated within carbon nanotubes

The template assisted growth of single-layered inorganic nanotubes is reported. Single-crystalline lead iodide single-layered nanotubes have been prepared using the inner cavities of carbon nanotubes as hosting templates. The diameter of the resulting inorganic nanotubes is merely dependent on the diameter of the host. This facile method is highly versatile opening up new horizons in the preparation of single-layered nanostructures.