Visible-light-induced disruption of diselenide-containing layer-by-layer films: toward combination of chemotherapy and photodynamic therapy

Deepened Photodynamic Therapy through Skin Optical Clearing Technology in the Visible Light Window

The trade-off that shorter wavelength light facilitates the efficient generation of reactive oxygen species (ROS) from photosensitizer (PS) while facing the drawback of limited penetration depth through skin tissue restricts the further development of photodynamic therapy (PDT). Here, we address this contradiction and achieve visible-light-tailored deep PDT combined with the skin optical clearing technology. With the help of the prepared skin optical clearing gel, the refractive index inhomogeneity between skin tissue components is greatly attenuated, and the light scattering effect within the skin tissue is remarkably reduced. As a consequence, the transmittance of visible light at 600 nm through in vitro porcine skin and in vivo mouse skin after treatment increases from approximately 10 and 40 to 70 and 70%, respectively. Furthermore, in the tumor cell eradication experiment, the local ROS generation efficiency in the experimental group is several times higher than that in the control group owing to improved visible transmittance, which is thus responsible for the complete eradication of tumor cells, even when shaded by skin tissue. The results suggest that this strategy may serve as a valuable supplement to the current deep PDT strategies.

Design of Smart Nanomedicines for Effective Cancer Treatment

Nanomedicine is a novel field of study that involves the use of nanomaterials to address challenges and issues that are associated with conventional therapeutics for cancer treatment including, but not limited to, low bioavailability, low water-solubility, narrow therapeutic window, nonspecific distribution, and multiple side effects of the drugs. Multiple strategies have been exploited to reduce the nonspecific distribution, and thus the side effect of the active pharmaceutical ingredients (API), including active and passive targeting strategies and externally controllable release of the therapeutic cargo. Site-specific release of the drug prevents it from impacting healthy cells, thereby significantly reducing side effects. API release triggers can be either externally applied, as in ultrasound-mediated activation, or induced by the tumor. To rationally design such nanomedicines, a thorough understanding of the differences between the tumor microenvironment versus that of healthy tissues must be pared with extensive knowledge of stimuli-responsive biomaterials. Herein, we describe the characteristics that differentiate tumor tissues from normal tissues. Then, we introduce smart materials that are commonly used for the development of smart nanomedicines to be triggered by stimuli such as changes in pH, temperature, and enzymatic activity. The most recent advances and their impact on the field of cancer therapy are further discussed.

Ultrasound-Enhanced Reactive Oxygen Species Responsive Charge-Reversal Polymeric Nanocarriers for Efficient Pancreatic Cancer Gene Delivery

Inefficient intracellular gene release and transfection limit nonviral gene delivery applications in cancer therapy. Reactive oxygen species (ROS) responsive nonviral gene delivery is the most widely explored strategy for such applications, yet the development of fast and safe ROS responsive nanocarriers proves to be a challenge because of the intracellular chemical equilibrium of high ROS and glutathione levels. Here, we report an ultrasound-enhanced ROS responsive charge-reversal polymeric nanocarrier (BTIL) for fast and efficient pancreatic cancer gene delivery. The BTIL is composed of B-PDEAEA/DNA polyplex-based cores and IR780-loaded liposome coatings. The IR780 is able to produce an excess of ROS under low intensity ultrasound irradiation, thus disequilibrating the chemical equilibrium of ROS and glutathione, and promoting the ROS-responsive positive-to-negative charge-reversal of the B-PDEAEA polymer. This charge conversion results in fast polyplex dissociation and intracellular gene release, inducing efficient gene transfection and cancer cell apoptosis. Moreover, following the intravenous administration, BTIL maintains a stable and long circulation in the bloodstream, achieves orthotopic pancreatic ductal adenocarcinoma distribution, and exhibits potent antitumor activity with negligible side effects. Our results reveal the proposed strategy to be both promising and universal for the development of fast and safe ROS responsive nonviral gene delivery in cancer therapy.

Reactive Oxygen Species Responsive Polymers for Drug Delivery Systems

Reactive oxygen species (ROS) play an essential role in regulating various physiological functions of living organisms; however, as the concentration of ROS increases in the area of a lesion, this may undermine cellular homeostasis, leading to a series of diseases. Using cell-product species as triggers for targeted regulation of polymer structures and activity represents a promising approach for the treatment. ROS-responsive polymer carriers allow the targeted delivery of drugs, reduce toxicity and side effects on normal cells, and control the release of drugs, which are all advantages compared with traditional small-molecule chemotherapy agents. These formulations have attracted great interest due to their potential applications in biomedicine. In this review, recent progresses on ROS responsive polymer carriers are summarized, with a focus on the chemical mechanism of ROS-responsive polymers and the design of molecular structures for targeted drug delivery and controlled drug release. Meanwhile, we discuss the challenges and future prospects of its applications.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Biomedical Application of Reactive Oxygen Species-Responsive Nanocarriers in Cancer, Inflammation, and Neurodegenerative Diseases

Numerous pathological conditions, including cancer, inflammatory diseases, and neurodegenerative diseases, are accompanied by overproduction of reactive oxygen species (ROS). This makes ROS vital flagging molecules in disease pathology. ROS-responsive drug delivery platforms have been developed. Nanotechnology has been broadly applied in the field of biomedicine leading to the progress of ROS-responsive nanoparticles. In this review, we focused on the production and physiological/pathophysiological impact of ROS. Particular emphasis is put on the mechanisms and effects of abnormal ROS levels on oxidative stress diseases, including cancer, inflammatory disease, and neurodegenerative diseases. Finally, we summarized the potential biomedical applications of ROS-responsive nanocarriers in these oxidative stress diseases. We provide insights that will help in the designing of new ROS-responsive nanocarriers for various applications.

Recent Advances in Tumor Microenvironment Hydrogen Peroxide-Responsive Materials for Cancer Photodynamic Therapy

Photodynamic therapy (PDT), as one of the noninvasive clinical cancer phototherapies, suffers from the key drawback associated with hypoxia at the tumor microenvironment (TME), which plays an important role in protecting tumor cells from damage caused by common treatments. High concentration of hydrogen peroxide (H₂O₂), one of the hallmarks of TME, has been recognized as a double-edged sword, posing both challenges, and opportunities for cancer therapy. The promising perspectives, strategies, and approaches for enhanced tumor therapies, including PDT, have been developed based on the fast advances in H₂O₂-enabled theranostic nanomedicine. In this review, we outline the latest advances in H₂O₂-responsive materials, including organic and inorganic materials for enhanced PDT. Finally, the challenges and opportunities for further research on H₂O₂-responsive anticancer agents are envisioned .

Recent Advances in Tumor Microenvironment Hydrogen Peroxide-Responsive Materials for Cancer Photodynamic Therapy

Photodynamic therapy (PDT), as one of the noninvasive clinical cancer phototherapies, suffers from the key drawback associated with hypoxia at the tumor microenvironment (TME), which plays an important role in protecting tumor cells from damage caused by common treatments. High concentration of hydrogen peroxide (H₂O₂), one of the hallmarks of TME, has been recognized as a double-edged sword, posing both challenges, and opportunities for cancer therapy. The promising perspectives, strategies, and approaches for enhanced tumor therapies, including PDT, have been developed based on the fast advances in H₂O₂-enabled theranostic nanomedicine. In this review, we outline the latest advances in H₂O₂-responsive materials, including organic and inorganic materials for enhanced PDT. Finally, the challenges and opportunities for further research on H₂O₂-responsive anticancer agents are envisioned .

A Biocompatible Multilayer Film from an Asymmetric Picolinium-Containing Polycation with Fast Visible-Light/NIR-Degradability

Finely tuning the photodegradation behavior of the layer-by-layer (LbL) film from the view of controlling the chemical structure of the film-building polymer is still a challenge in related fields. To meet this requirement, a photodegradable polymer (P1) is rationally designed for assembling a visible-light-degradable multilayer film with polystyrene sulfonate (PSS). Compared with similar photopolymers (P2 and P3), this asymmetric picolinium-containing polymer can significantly enhance the degradation rate of as-prepared LbL films; under the same degradation condition, the degradation rate of (P1/PSS)10 is 3 and 6.6 times that of (P2/PSS)10 and (P3/PSS)10, respectively. Moreover, near-infrared light (NIR) is available for triggering the degradation of this film with the assistance of upconversion nanoparticles of YbTm@Lu. The cell cytotoxicity and cell proliferation experiments reveal that P1 is nontoxic and favorable for cell proliferation at concentrations of up to 500 μg mL^-1 . As for (PSS/P1)10 films, the ratio of cell number of these two samples ((PSS/P1)10 modified: photodegraded) increases dramatically and reaches about 1.67:1 after 72 h incubation. On the basis of these results, it is anticipated that P1 and this LbL film is an exceptional candidate for visible-light/NIR degradable materials in materials and biological science, medicine, and optics.

Diselenide linkage containing triblock copolymer nanoparticles based on Bi(methoxyl poly(ethylene glycol))-poly(ε-carprolactone): Selective intracellular drug delivery in cancer cells

Redox-responsive diselenide bond containing triblock copolymer Bi(mPEG-SeSe)-PCL,Bi(mPEG-SeSe)-PCL was developed for specific drug release in cancer cells. Initially, ditosylated polycaprolactone was prepared via the reaction between polycaprolactone diol (PCL-diol) and tosyl chloride (TsCl). Next, Bi(mPEG-SeSe)-PCL was synthesized via the reaction between ditosylated polycaprolactone and sodium diselenide initiated poly (ethylene glycol) methyl ether tosylate. The synthesized amphiphilic triblock copolymer could self-assemble into uniform nanoparticles in aqueous medium and disassemble upon redox stimuli. The Bi(mPEG-SeSe)-PCL nanoparticles showed a DOX loading content of 5.1 wt% and a loading efficiency of 49%. In vitro drug release studies showed that about 62.4% and 56% of DOX was released from the nanoparticles during 72 h at 37 °C in PBS containing 2 mg/mL (6 mM) GSH and 0.1% H2O2, respectively, whereas only about 30% of DOX was released in PBS under the same conditions. The cell viability (MTT assays) results showed that the synthesized material was biocompatible with above 90% cell viability, and that the DOX-loaded Bi(mPEG-SeSe)-PCL nanoparticles had a high antitumor activity against HeLa cells and low antitumor activity against HaCaT cells, following a 24-h incubation period. Three-dimensional (3D) spheroids of HeLa cells were established for the evaluation of localization of the DOX-loaded nanoparticles into spheroids cells and the successfully inhibition of 3D tumor spheroid growth. The results indicated that the synthesized material Bi(mPEG-SeSe)-PCL was biocompatible and it could be a potential candidate for anticancer drug delivery system.

Bioinspired Diselenide-Bridged Mesoporous Silica Nanoparticles for Dual-Responsive Protein Delivery

Controlled delivery of protein therapeutics remains a challenge. Here, the inclusion of diselenide-bond-containing organosilica moieties into the framework of silica to fabricate biodegradable mesoporous silica nanoparticles (MSNs) with oxidative and redox dual-responsiveness is reported. These diselenide-bridged MSNs can encapsulate cytotoxic RNase A into the 8-10 nm internal pores via electrostatic interaction and release the payload via a matrix-degradation controlled mechanism upon exposure to oxidative or redox conditions. After surface cloaking with cancer-cell-derived membrane fragments, these bioinspired RNase A-loaded MSNs exhibit homologous targeting and immune-invasion characteristics inherited from the source cancer cells. The efficient in vitro and in vivo anti-cancer performance, which includes increased blood circulation time and enhanced tumor accumulation along with low toxicity, suggests that these cell-membrane-coated, dual-responsive degradable MSNs represent a promising platform for the delivery of bio-macromolecules such as protein and nucleic acid therapeutics.

Selenium nanoparticles: potential in cancer gene and drug delivery

In recent decades, colloidal selenium nanoparticles have emerged as exceptional selenium species with reported chemopreventative and therapeutic properties. This has sparked widespread interest in their use as a carrier of therapeutic agents with results displaying synergistic effects of selenium with its therapeutic cargo and improved anticancer activity. Functionalization remains a critical step in selenium nanoparticles' development for application in gene or drug delivery. In this review, we highlight recent developments in the synthesis and functionalization strategies of selenium nanoparticles used in cancer drug and gene delivery systems. We also provide an update of recent preclinical studies utilizing selenium nanoparticles in cancer therapeutics.

Diselenide-Containing Hyperbranched Polymer with Light-Induced Cytotoxicity

A light-induced cytotoxicity system was fabricated using active diselenide/porphyrin-containing hyperbranched polymer aggregates in aqueous solution through emulsification. When the nanoparticles were irradiated with visible light, ¹O₂ was produced by the porphyrin photosensitizers in the system, which cleaved the diselenide bonds in the polymer chains and disassembled the nanosystem. Interestingly, the oxidized products exhibited cytotoxicity to the MDA-MB 231cell line without using extra anticancer drugs, which endowed the system with potential visible light-induced antitumor activity. In combination with photodynamic therapy, it is greatly anticipated that better anticancer efficacy can be achieved with this system.

ROS-responsive drug delivery systems

Reactive oxygen species (ROS) play an important role in signal transduction and metabolism. Over-produced ROS in cells or tissues, however, often leads to oxidation stress that has implications in a series of diseases including cancer, aging, atherosclerosis and inflammation. Driven by the need for on-demand drug delivery and fuelled by recent development of ROS-responsive materials and nanomedicine, responsive drug delivery systems (DDSs) have gained increasing research interest. ROS-responsive DDS is designed to release therapeutic agents only in targets of interest that produce excessive ROS, which may lead to both enhanced therapeutic efficiency and reduced side effects. Multiple-stimuli responsive DDSs that are also sensitive to other stimuli can further enhance controlled drug release in sites where multiple stimuli coexist. Beyond drug delivery, multifunctional DDSs have great potential in achieving simultaneous imaging, combinatorial therapy and targeting ability by introducing multifunctional elements such as signal reporter, targeting elements and photosensitizer. This review will summarize the latest development of ROS-responsive DDSs and discuss their design principle and biomedical applications.

Stimuli-Responsive Layer-by-Layer Tellurium-Containing Polymer Films for the Combination of Chemotherapy and Photodynamic Therapy

Tellurium-containing photoresponsive polyelectrolyte multilayer films were fabricated by layer-by-layer assembly of a tellurium-containing polymer, photosensitizer, and poly(styrenesulfonate). The resulting films were investigated by UV/vis spectroscopy, XPS, EPR, and fluorescence spectroscopy. Under visible light, the photosensitizer in the film is excited and transforms triplet oxygen into singlet oxygen in aqueous solution. Singlet oxygen oxidizes -Te- to high valence state (Te═O) on the polymer backbone. The generated (Te═O) group makes the micelles more hydrophilic and looser, thereby facilitating the controlled release of the loaded cargo of micelles. These results show that the film has the potential to be used for cargo loading and controlled release, thus may provide a new way to combine photodynamic therapy and chemotherapy.

Monascus Pigment Rubropunctatin: A Potential Dual Agent for Cancer Chemotherapy and Phototherapy

The Monascus pigment, rubropunctatin, was extracted and purified from red mold rice (RMR), and its cytotoxic activities against human cervical carcinoma HeLa cells were studied under the conditions with or without light irradiation. The IC50 value of rubropunctatin against HeLa cells in the dark was 93.71 ± 1.96 μM (24 h), while the cytotoxic activity was enhanced more than 3 times (IC50 = 24.02 ± 2.17 μM) under light irradiation (halogen lamp, 500 W; wavelength, 597-622 nm; and fluence rate, 15 mW cm(-2), for 30 min). However, the IC50 value of rubropunctatin against the immortalized human cervical epithelial H8 cells was more than 300 μM, even under light irradiation, indicating that rubropunctatin has a favorable selectivity index (SI). Treatment of HeLa cells with rubropunctatin in the dark or under light irradiation resulted in a dose-dependent apoptosis, as validated by the increase in the percentage of cells in the sub-G1 phase and phosphatidylserine externalization, and the inductive effect on HeLa cell apoptosis was boosted by the light irradiation. In addition, treatment with rubropunctatin alone or under light irradiation was found to induce apoptosis in HeLa cells via the mitochondrial pathway, including loss of mitochondrial membrane potential, activation of caspase-3, caspase-8, and caspase-9, and increase of the level of intracellular reactive oxygen species (ROS). It was suggested that rubropunctatin could be a promising natural dual anticancer agent for photodynamic therapy and chemotherapy.

Light-controllable toxicity recovery from selenium-based amphiphiles

A selenium-containing anticancer compound DSeMTTG was prepared, which could be self-assembled into a unimolecular amphiphilic drug nanoassembly (UADN) with good biocompatibility.

Dual redox-triggered shell-sheddable micelles self-assembled from mPEGylated starch conjugates for rapid drug release

The new diselenide-linked mPEGylated starch amphiphilic micelles was developed, which could be disrupted in the presence of 0.1% (v/v) H₂O₂ or 1 mM GSH.

Visible-Light-Induced Self-Healing Diselenide-Containing Polyurethane Elastomer

Visible light is an easily achievable and mild trigger for self-healing materials. By incorporating dynamic diselenide bonds into polyurethane, visible-light-induced self-healing materials can be fabricated. Besides mild visible light, the healing process can also be realized using directional laser irradiation, which makes the system a remotely controllable self-healing system.

Nanocoating for biomolecule delivery using layer-by-layer self-assembly

Since its introduction in the early 1990s, layer-by-layer (LbL) self-assembly of films has been widely used in the fields of nanoelectronics, optics, sensors, surface coatings, and controlled drug delivery. The growth of this industry is propelled by the ease of film manufacture, low cost, mild assembly conditions, precise control of coating thickness, and versatility of coating materials. Despite the wealth of research on LbL for biomolecule delivery, clinical translation has been limited and slow. This review provides an overview of methods and mechanisms of loading biomolecules within LbL films and achieving controlled release. In particular, this review highlights recent advances in the development of LbL coatings for the delivery of different types of biomolecules including proteins, polypeptides, DNA, particles and viruses. To address the need for co-delivery of multiple types of biomolecules at different timing, we also review recent advances in incorporating compartmentalization into LbL assembly. Existing obstacles to clinical translation of LbL technologies and enabling technologies for future directions are also discussed.

Layer-by-layer-assembled healable antifouling films

Healable antifouling films are fabricated by the exponential layer-by-layer assembly of PEGylated branched poly(ethylenimine) and hyaluronic acid followed by post-crosslinking. The antifouling function originates from the grafted PEG and the extremely soft nature of the films. The rapid and multiple healing of damaged antifouling functions caused by cuts and scratches can be readily achieved by immersing the films in normal saline solution.

Redox poly(ethylene glycol)-b-poly(L-lactide) micelles containing diselenide bonds for effective drug delivery

Bioreducible polymers have appeared as the ideal drug carriers for tumor therapy due to their properties of high stability in extracellular circulation and rapid drug release in intracellular reducing environment. Recently, the diselenide bond has emerged as a new reduction-sensitive linkage. In this work, the amphiphilic poly(ethylene glycol)-b-poly(L-lactide) containing diselenide bond has been synthesized and used to load anti-tumor drug, docetaxel (DTX), to form the redox micelles. It was found that the redox micelles showed a rapid response to glutataione (GSH), which resulted in a fast release of DTX in the presence of GSH. In contrast, <40 % of DTX was released from the micelles within 72 h under the normal condition (absence of GSH). The DTX-loaded redox micelles showed the significant inhibition effect to MCF-7 cells, and the cytotoxicity was dependent on the intracellular GSH concentrations. Moreover, considering the potentially clinical applications of the micelles through intravenous injection, the blood compatibility was also studied by the hemolysis analysis, activated partial thromboplastin time, prothrombin time and thromboelastography assays. These results confirmed that the redox micelles showed good blood safety, suggesting a potential application in tumor therapy.

Robust two-photon visualized nanocarrier with dual targeting ability for controlled chemo-photodynamic synergistic treatment of cancer

In consideration of the intrinsic complexity of cancer, just being a delivery nanovehicle for the nanocarrier is no longer enough to fulfill requirements of dealing with cancer. In this regard, the multifunctional nanocarrier appears to be an appealing choice in cancer treatment. Herein, the novel multifunctional nanocarrier (Fe3O4-NS-C3N4@mSiO2-PEG-RGD) possessing properties of dual targeting (the peptide- and magnetism-mediated targeting), imaging (one- and two-photon modes), pH-triggered release of loaded anticancer drug, and synergistic treatment (photodynamic therapy (PDT) combined with chemotherapy) are successfully developed. The nanocarrier specifically centralizes within cancer cells with the enhanced amount through the dual targeting ability and is facilely tracked under one- and two-photon imaging modes attributed to the autofluorescence. Then, visible light irradiation-induced PDT combined with low pH-triggered chemotherapy synergistically cooperate to efficiently kill cancer cells. Following the above process, the multifunctional nanocarrier demonstrates effective inhibition of the growth of A549 and HeLa cancer cells. The efficient manipulation of Fe3O4-NS-C3N4@mSiO2-PEG-RGD also implies potential applications of the multifunctional nanocarrier in delivery of different agents. Furthermore, it might also broaden the scope of fabrication of the multifunctional nanocarrier for inhibiting the growth of cancer cells.

Reactive oxygen species (ROS)-responsive tellurium-containing hyperbranched polymer

Tellurium-containing hyperbranched polymers form aggregates, which are a new kind of material responsive to reactive oxygen species at a physiological level.