Origin of tunable photocatalytic selectivity of well-defined α-Fe(2)O(3) nanocrystals

Facet-dependent activation of oxalic acid over hematite nanocrystals under the irradiation of visible light for efficient degradation of pollutants

Naturally occurring hematite has been widely studied in the Fenton-like system for water pollutant remediation due to its abundance and non-toxicity. However, its inadequate catalytic activity results in difficulty in effectively degrading pollutants in the catalytic degradation system that it constitutes. Thus, we constructed a photochemical system composed of hematite with {001} facet of high activity facet and low-cost and non-toxic oxalic acid (OA) for the removal of various types of pollutants. The removal rate for the degradation of metronidazole, tetracycline hydrochloride, Rhodamine B, and hexavalent chromium by hematite nanoplate with the exposed {001} facet activating OA under visible light irradiation was 4.75, 2.25, 2.33, and 2.74 times than that by the exposed {110} facet, respectively. Density functional theory (DFT) calculation proved that the OA molecule was more easily adsorbed on the {001} facet of hematite than that on the {110} facet, which would favor the formation of the more Fe(III)-OA complex and reactive species. In addition, the reactive site of metronidazole for the attraction of radicals was identified on the basis of the DFT calculation on the molecular occupied orbitals, and the possible degradation pathway for metronidazole included carbon chain fracture, hydroxyethyl-cleavage, denitrogenation, and hydroxylation. Thus, this finding may offer a valuable direction in designing an efficient iron-based catalyst based on facet engineering for the improved activity of Fenton-like systems such as OA activation.

Enzymatic and Bioinspired Systems for Hydrogen Production

The extraordinary potential of hydrogen as a clean and sustainable fuel has sparked the interest of the scientific community to find environmentally friendly methods for its production. Biological catalysts are the most attractive solution, as they usually operate under mild conditions and do not produce carbon-containing byproducts. Hydrogenases promote reversible proton reduction to hydrogen in a variety of anoxic bacteria and algae, displaying unparallel catalytic performances. Attempts to use these sophisticated enzymes in scalable hydrogen production have been hampered by limitations associated with their production and stability. Inspired by nature, significant efforts have been made in the development of artificial systems able to promote the hydrogen evolution reaction, via either electrochemical or light-driven catalysis. Starting from small-molecule coordination compounds, peptide- and protein-based architectures have been constructed around the catalytic center with the aim of reproducing hydrogenase function into robust, efficient, and cost-effective catalysts. In this review, we first provide an overview of the structural and functional properties of hydrogenases, along with their integration in devices for hydrogen and energy production. Then, we describe the most recent advances in the development of homogeneous hydrogen evolution catalysts envisioned to mimic hydrogenases.

Treatment of real printing and packaging wastewater by combination of coagulation with Fenton and photo-Fenton processes

Printing and packaging process wastewater (PPPW) with high flow rates causes severe damage to the environment due to high organic pollution (3830.0 mg O₂/L of COD and 813.6 mg/L of TOC) and turbidity (9110 NTU). This study examined the efficiencies of coagulation, Fenton, and photo-Fenton procedures, and their combinations in the treatment of PPPW. The three inorganic salts (FeCl₃, Al₂(SO₄)₃, and Fe₂(SO₄)₃) were used in a wide range of pH (2.5-10) as a coagulant, and FeCl₃ was chosen as the optimum coagulant. The 71.3% of TOC removal and the decreasing of turbidity up to 5.8 NTU were obtained at 0.5 g/L FeCl₃ and pH of 6.0. Then, Fenton and photo-Fenton processes were applied to the effluent of the coagulation process. The Fenton process engaged the TOC removal efficiencies up to 85.2% in the presence of 7.350 g/L iron catalysts and 36.0 mL/L H₂O₂. The combined coagulation and Fenton process is a promising way to decrease the COD up to 119 mg O₂/L, meeting the wastewater discharge standards of COD (200 mg O₂/L) in Turkey. However, adding UV sources to the Fenton process showed a little bit of engagement (only %1.4 extra removal). When evaluated for PPPW, it is seen that the usage of combined coagulation and the Fenton process is an important treatment alternative. Furthermore, Zeta potential measurements and size exclusion chromatography were used to understand the removal mechanism.

Research Progress on Graphitic Carbon Nitride/Metal Oxide Composites: Synthesis and Photocatalytic Applications

Although graphitic carbon nitride (g-C3N4) has been reported for several decades, it is still an active material at the present time owing to its amazing properties exhibited in many applications, including photocatalysis. With the rapid development of characterization techniques, in-depth exploration has been conducted to reveal and utilize the natural properties of g-C3N4 through modifications. Among these, the assembly of g-C3N4 with metal oxides is an effective strategy which can not only improve electron-hole separation efficiency by forming a polymer-inorganic heterojunction, but also compensate for the redox capabilities of g-C3N4 owing to the varied oxidation states of metal ions, enhancing its photocatalytic performance. Herein, we summarized the research progress on the synthesis of g-C3N4 and its coupling with single- or multiple-metal oxides, and its photocatalytic applications in energy production and environmental protection, including the splitting of water to hydrogen, the reduction of CO2 to valuable fuels, the degradation of organic pollutants and the disinfection of bacteria. At the end, challenges and prospects in the synthesis and photocatalytic application of g-C3N4-based composites are proposed and an outlook is given.

Instability Issues and Stabilization Strategies of Lead Halide Perovskites for Photo(electro)catalytic Solar Fuel Production

Photo(electro)catalysis is a promising route to utilizing solar energy to produce valuable chemical fuels. In recent years, lead halide perovskites (LHPs) as a class of high-performance semiconductor materials have been extensively used in photo(electro)catalytic solar fuel production because of their excellent photophysical properties. However, instability issues make it arduous for LHPs to achieve their full potential in photo(electro)catalysis. This Perspective discusses the instability issues and summarizes the stabilization strategies employed for prolonging the stability or durability of LHPs in photo(electro)catalytic solar fuel production. The strategies for particulate photocatalytic systems (including composition engineering, surface passivation, core-shell structures construction, and solvent selection) and for thin-film PEC systems (including physical protective coating, A site cation additive, and surface/interface passivation) are introduced. Finally, some challenges and opportunities regarding the development of stable and efficient LHPs for photo(electro)catalysis are proposed.

An Overview of the Recent Progress in Polymeric Carbon Nitride Based Photocatalysis

Recently, polymeric carbon nitride (g-C₃ N₄ ) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C₃ N₄ (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H₂ production from H₂ O, CO₂ conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.

Facet-Dependent Photodegradation of Methylene Blue by Hematite Nanoplates in Visible Light

The expression of specific crystal facets in different nanostructures is known to play a vital role in determining the sensitivity toward the photodegradation of organics, which can generally be ascribed to differences in surface structure and energy. Herein, we report the synthesis of hematite nanoplates with controlled relative exposure of basal (001) and edge (012) facets, enabling us to establish direct correlation between the surface structure and the photocatalytic degradation efficiency of methylene blue (MB) in the presence of hydrogen peroxide. MB adsorption experiments showed that the capacity on (001) is about three times larger than on (012). Density functional theory calculations suggest the adsorption energy on the (001) surface is 6.28 kcal/mol lower than that on the (012) surface. However, the MB photodegradation rate on the (001) surface is around 14.5 times faster than on the (012) surface. We attribute this to a higher availability of the photoelectron accepting surface Fe³⁺ sites on the (001) facet. This facilitates more efficient iron valence cycling and the heterogeneous photo-Fenton reaction yielding MB-oxidizing hydroxyl radicals at the surface. Our findings help establish a rational basis for the design and optimization of hematite nanostructures as photocatalysts for environmental remediation.

Bioinspired Assembly of Double Honeycomb-Like Hierarchical Capsule Confined Encapsulation with Functional Micro/Nanocrystals

Inspired by "micro/nanoreactor" effect of cellular organelle on specific biochemical reactions, a double honeycomb-like hierarchical capsule confined encapsulation with functional micro/nanocrystals is designed. The bioinspired hierarchical capsules derived from polymeric composite microspheres are successfully fabricated through a combination of selective chemical etching and pyrolysis. In situ introduction of functional guests (including organometallic molecules, tetraethoxysilane, or metal-organic frameworks (MOFs)) into internal cellular structure of microspheres is first put forward by phase inversion method. The development of selective etching creates honeycomb-like structure on the outside surface of capsule and allows sulfur to homogeneously distribute into matrix. With the novel approach, the hierarchical channels (micro-meso-macropore) of composite capsule enhance transportation of reactants and dispersion of active sites, and thus exhibit superior photocatalytic oxidation and electromagnetic absorbing. The promising strategy will be applied more generally to encapsulate different species into hierarchical capsule with tailored properties and functionalities.

Multi-Component Mesocrystalline Nanoparticles with Enhanced Photocatalytic Activity

Mesocrystals, consisting of small subunits, have gained research interests owing to their ability to simultaneously modify material-specific properties and interactions among subunits. However, despite these unique characteristics, most mesocrystals are composed of a single material, and there is a disjunction between academic discovery and practical application. In this study, the synthesis of multi-component mesocrystalline nanoparticles composed of Fe₃ O₄ , ZnFe₂ O₄ , and ZnO subunits using a polymerization induced heterogeneous nucleation method is reported. The structure has small ZnFe₂ O₄ and ZnO nanocrystals covering the Fe₃ O₄ crystallites. It exhibits not only magnetic and catalytic properties determined by the size of each subunit nanocrystal, but also enhances photocatalytic and colloidal properties that originates because of its crowded arrangement. The magnetically recoverable catalysts exhibit remarkable photodegradation of organic molecules under the irradiation of visible light for 1 h; thus, improving its applicability in purifying a large amount of wastewater during the daytime.

In situ preparation of a nanocomposite comprising graphene and α-Fe2O3 nanospindles for the photo-degradation of antibiotics under visible light

Preparation of α-Fe₂O₃ nanospindle (NS) decorated graphene sheets for antibiotic degradation.

Facet-Specific Photocatalytic Degradation of Organics by Heterogeneous Fenton Chemistry on Hematite Nanoparticles

Hematite nanoparticles are abundant in the photic zone of aquatic environments, where they play a prominent role in photocatalytic transformations of bound organics. Here, we examine the photocatalytic degradation of rhodamine B by visible light using two different structurally well-defined hematite nanoparticle morphologies. In addition to detailed solid characterization and aqueous kinetics measurements, we also exploit species-selective scavengers in electron paramagnetic resonance spectroscopy to sequester specific reaction channels and thereby assess their impact. The photodegradation rates for nanoplates dominated by {001} facets and nanocubes dominated by {012} facets were 0.13 and 0.7 h^-1, respectively, and the turnover frequencies for the active sites on {001} and {012} were 7.89 × 10^-3 and 3.07× 10^-3 s^-1, yielding apparent activation energies of 17.13 and 24.94 kcal/mol within the energetic span model, respectively. Facet-specific differences appear to be directly not linked with the simple aerial cation site density but instead with their extent of undercoordination. By establishing this linkage, the findings lay a foundation for predicting the photocatalytic degradation efficiency for the myriad of possible hematite nanoparticle morphologies and more broadly help unveil key reactions at the interface that may govern photocatalytic organic transformations in natural and engineered aquatic environments.

Artificial Photosynthesis with Polymeric Carbon Nitride: When Meeting Metal Nanoparticles, Single Atoms, and Molecular Complexes

Artificial photosynthesis for solar water splitting and CO₂ reduction to produce hydrogen and hydrocarbon fuels has been considered as one of the most promising ways to solve increasingly serious energy and environmental problems. As a well-documented metal-free semiconductor, polymeric carbon nitride (PCN) has been widely used and intensively investigated for photocatalytic water splitting and CO₂ reduction, owing to its physicochemical stability, visible-light response, and facile synthesis. However, PCN as a photocatalyst still suffers from the fast recombination of electron-hole pairs and poor water redox reaction kinetics, greatly restricting its activity for artificial photosynthesis. Among the various modification approaches developed so far, decorating PCN with metals in different existences of nanoparticles, single atoms and molecular complexes, has been evidently very effective to overcome these limitations to improve photocatalytic performances. In this Review article, a systematic introduction to the state-of-the-art metal/PCN photocatalyst systems is given, with metals in versatility of nanoparticles, single atoms, and molecular complexes. Then, the recent processes of the metal/PCN photocatalyst systems in the applications of artificial photosynthesis, e.g., water splitting and CO₂ reduction, are reviewed. Finally, the remaining challenges and opportunities for the development of high efficiency metal/PCN photocatalyst systems are presented and prospected.

Influence of ferroelectric dipole on the photocatalytic activity of heterostructured BaTiO3/a-Fe2O3

Using BaTiO₃ as a model ferroelectric material we investigated the influence of the ferroelectric dipole on the photocatalytic activity of a heterogeneous BaTiO₃/α-Fe₂O₃ photocatalyst. Two distinct BaTiO₃ samples were used: BTO and BTO-A. The latter consists more ferroelectric tetragonal phase and thus stronger ferroelectricity. It was found that under identical experimental conditions, the photodecolourisation rate of a target dye using BTO-A/α-Fe₂O₃ under visible light was 1.3 times that of BTO/α-Fe₂O₃. Photoelectrochemical and photoluminescence analysis confirmed a more effective charge carrier separation in BTO-A/α-Fe₂O₃. Considering solely the photoexcitation of α-Fe₂O₃ in the composite photocatalysts under visible light and the similar microstructures of the two catalysts, we propose that the enhanced decolourisation rate when using BTO-A/α-Fe₂O₃ is due to the improved charge carrier separation and extended charge carrier lifetime arising from an interaction between the ferroelectric dipole and the carriers in α-Fe₂O₃. Our results demonstrate a new process to use a ferroelectric dipole to manipulate the charge carrier transport, overcome recombination, and extend the charge carrier lifetime of the surface material in a heterogeneous catalyst system.

Structure-Controlled Oxygen Concentration in Fe2O3 and FeO2

Solid-solid reaction, particularly in the Fe-O binary system, has been extensively studied in the past decades because of its various applications in chemistry and materials and earth sciences. The recently synthesized pyrite-FeO₂ at high pressure suggested a novel oxygen-rich stoichiometry that extends the achievable O-Fe ratio in iron oxides by 33%. Although FeO₂ was synthesized from Fe₂O₃ and O₂, the underlying solid reaction mechanism remains unclear. Herein, combining in situ X-ray diffraction experiments and first-principles calculations, we identified that two competing phase transitions starting from Fe₂O₃: (1) without O₂, perovskite-Fe₂O₃ transits to the post-perovskite structure above 50 GPa; (2) if free oxygen is present, O diffuses into the perovskite-type lattice of Fe₂O₃ leading to the pyrite-type FeO₂ phase. We found the O-O bonds in FeO₂ are formed by the insertion of oxygen into the Pv lattice via the external stress and such O-O bonding is only kinetically stable under high pressure. This may provide a general mechanism of adding extra oxygen to previous known O saturated oxides to produce unconventional stoichiometries. Our results also shed light on how O is enriched in mantle minerals under pressure.

Controlled Synthesis of Hollow α-Fe2O3 Microspheres Assembled With Ionic Liquid for Enhanced Visible-Light Photocatalytic Activity

Porous self-assembled α-Fe₂O₃ hollow microspheres were fabricated via an ionic liquid-assisted solvothermal reaction and sequential calcinations. The concentration of the ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate [C₄Mim]BF₄) was found to play a crucial role in the control of these α-Fe₂O₃ hollow structures. Trace amounts ionic liquid was used as the soft template to synthesize α-Fe₂O₃ hollow spheres with a large specific surface (up to 220 m²/g). Based on time-dependent experiments, the proposed formation mechanisms were presented. Under UV light irradiation, the as-synthesized α-Fe₂O₃ hollow spheres exhibited excellent photocatalysis in Rhodamine B (RhB) photodegradation and the rate constant was 2–3 times higher than α-Fe₂O₃ particles. The magnetic properties of α-Fe₂O₃ hollow structures were found to be closely associated with the shape anisotropy.

Hematite mesocrystals templated by hydrolyzed and aminolyzed glycidyl methacrylate, and their application in photocatalytic Fenton reaction

Aminolyzed and hydrolyzed glycidyl methacrylate were applied for hydrothermal preparation of bipyramids and plate-like hematite mesocrystals with (116) and (001) exposed faces, respectively.

Sustainable preparation of sunlight active α-Fe2O3 nanoparticles using iron containing ionic liquids for photocatalytic applications

Inspired by the nano-segregation of ionic liquids (ILs) into bi-continuous structures constituting of arrays of ionic and non-ionic components, herein, a new and sustainable strategy for preparation of mesh-like nano-sheet α-Fe₂O₃ nanoparticles and their photo-catalytic activity under sunlight, is presented. For the purpose, metal (iron) containing ionic liquids (MILs), 1-alkyl-3-methylimidazolium tetrachloroferrates, [C_nmim][FeCl₄], (n = 4, 8 and 16), which not only act as precursors and solvents but also as structure directing agents have been used. Thus prepared NPs show MIL dependent structural, photophysical and magnetic properties. The catalytic efficiency of NPs has been tested for the photo-degradation of organic dyes (Rhodamine B) in aqueous solution under sunlight. The NPs are found to exhibit comparable catalytic efficiency under sunlight as compared to that observed under high intensity visible lamplight, without showing a decline in their catalytic efficiency even after 4 catalytic cycles. It is anticipated that the present work will provide a new platform for preparation of sunlight active nanomaterials for photo-catalytic applications with control over the structural and physical properties via varying the molecular structure of MILs.

Inspired by nanosegregation of ionic liquids into bicontinuous structures of arrays of ionic and non-ionic components, we present a new sustainable strategy for preparation of mesh-like nano-sheets of α-Fe₂O₃ nanoparticles and their photocatalytic activity under sunlight.

Controllable synthesis of graphitic carbon nitride nanomaterials for solar energy conversion and environmental remediation: the road travelled and the way forward

This review discusses advances in the synthesis and design of g-C₃N₄-based nanomaterials and their various photocatalytic and photoredox applications.

Novel g-C3N4/CoO Nanocomposites with Significantly Enhanced Visible-Light Photocatalytic Activity for H2 Evolution

Novel g-C₃N₄/CoO nanocomposite application for photocatalytic H₂ evolution were designed and fabricated for the first time in this work. The structure and morphology of g-C₃N₄/CoO were investigated by a wide range of characterization methods. The obtained g-C₃N₄/CoO composites exhibited more-efficient utilization of solar energy than pure g-C₃N₄ did, resulting in higher photocatalytic activity for H₂ evolution. The optimum photoactivity in H₂ evolution under visible-light irradiation for g-C₃N₄/CoO composites with a CoO mass content of 0.5 wt % (651.3 μmol h^-1 g^-1) was up to 3 times as high as that of pure g-C₃N₄ (220.16 μmol h^-1 g^-1). The remarkably increased photocatalytic performance of g-C₃N₄/CoO composites was mainly attributed to the synergistic effect of the junction or interface formed between g-C₃N₄ and CoO.

Oxidative Polyoxometalates Modified Graphitic Carbon Nitride for Visible-Light CO2 Reduction

Developing a photocatalysis system for converting CO₂ to valuable fuels or chemicals is a promising strategy to address global warming and fossil fuel consumption. Exploring photocatalysts with high-performance and low-cost has been two ultimate goals toward photoreduction of CO₂. Herein, noble-metal-free polyoxometalates (Co4) with oxidative ability was first introduced into g-C₃N₄ resulted in inexpensive hybrid materials (Co4@g-C₃N₄) with staggered band alignment. The staggered composited materials show a higher activity of CO₂ reduction than bare g-C₃N₄. An optimized Co4@g-C₃N₄ hybrid sample exhibited a high yield (107 μmol g^-1 h^-1) under visible-light irradiation (λ ≥ 420 nm), meanwhile maintaining high selectivity for CO production (94%). After 10 h of irradiation, the production of CO reached 896 μmol g^-1. Mechanistic studies revealed the introduction of Co4 not only facilitate the charge transfer of g-C₃N₄ but greatly increased the surface catalytic oxidative ability. This work creatively combined g-C₃N₄ with oxidative polyoxometalates which provide novel insights into the design of low-cost photocatalytic materials for CO₂ reduction.

Synthesis, Property Characterization and Photocatalytic Activity of the Polyaniline/BiYTi₂O₇ Polymer Composite

A new polyaniline/BiYTi₂O₇ polymer composite was synthesized by chemical oxidation in-situ polymerization method for the first time. The effect of polyaniline doping on structural and catalytic properties of BiYTi₂O₇ was reported. The structural properties of novel polyaniline/BiYTi₂O₇ have been characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis DRS. The results showed that BiYTi₂O₇ crystallized well with the pyrochlore-type structure, stable cubic crystal system by space group Fd3m. The lattice parameter or band gap energy of BiYTi₂O₇ was found to be a = 10.2132 Å or 2.349 eV, respectively. The novel polyaniline/BiYTi₂O₇ polymer composite possessed higher catalytic activity compared with BiYTi₂O₇ or nitrogen doped TiO₂ for photocatalytic degradation of Azocarmine G under visible light irradiation. Additionally, the Azocarmine G removal efficiency was boosted from 3.0% for undoped BiYTi₂O₇ to 78.0% for the 10% polyaniline-modified BiYTi₂O₇, after only 60 min of reaction. After visible light irradiation for 330 min with polyaniline/BiYTi₂O₇ polymer composite as photocatalyst, complete removal and mineralization of Azocarmine G was observed. The photocatalytic degradation of Azocarmine G followed first-order reaction kinetics. Ultimately, the promoter action of H₂O₂ for photocatalytic degradation of AG with BiYTi₂O₇ as catalyst in the wastewater was discovered.

Superior photocatalytic performance of LaFeO3/g-C3N4 heterojunction nanocomposites under visible light irradiation

New type of Z-scheme LaFeO₃/g-C₃N₄ heterostructures were successfully prepared and the enhanced photocatalytic hydrogen evolution and degradation activities are presented.

Graphene in Photocatalysis: A Review

In recent years, heterogeneous photocatalysis has received much research interest because of its powerful potential applications in tackling many important energy and environmental challenges at a global level in an economically sustainable manner. Due to their unique optical, electrical, and physicochemical properties, various 2D graphene nanosheets-supported semiconductor composite photocatalysts have been widely constructed and applied in different photocatalytic fields. In this review, fundamental mechanisms of heterogeneous photocatalysis, including thermodynamic and kinetics requirements, are first systematically summarized. Then, the photocatalysis-related properties of graphene and its derivatives, and design rules and synthesis methods of graphene-based composites are highlighted. Importantly, different design strategies, including doping and sensitization of semiconductors by graphene, improving electrical conductivity of graphene, increasing eloectrocatalytic active sites on graphene, strengthening interface coupling between semiconductors and graphene, fabricating micro/nano architectures, constructing multi-junction nanocomposites, enhancing photostability of semiconductors, and utilizing the synergistic effect of various modification strategies, are thoroughly summarized. The important applications including photocatalytic pollutant degradation, H₂ production, and CO₂ reduction are also addressed. Through reviewing the significant advances on this topic, it may provide new opportunities for designing highly efficient 2D graphene-based photocatalysts for various applications in photocatalysis and other fields, such as solar cells, thermal catalysis, separation, and purification.

Defect-induced enhanced photocatalytic activities of reduced α-Fe2O3 nanoblades

Bicrystalline α-Fe2O3 nanoblades (NBs) synthesized by thermal oxidation of iron foils were reduced in vacuum, to study the effect of reduction treatment on microstructural changes and photocatalytic properties. After the vacuum reduction, most bicrystalline α-Fe2O3 NBs transform into single-layered NBs, which contain more defects such as oxygen vacancies, perfect dislocations and dense pores. By comparing the photodegradation capability of non-reduced and reduced α-Fe2O3 NBs over model dye rhodamine B (RhB) in the presence of hydrogen peroxide, we find that vacuum-reduction induced microstructural defects can significantly enhance the photocatalytic efficiency. Even after 10 cycles, the reduced α-Fe2O3 NBs still show a very high photocatalytic activity. Our results demonstrate that defect engineering is a powerful tool to enhance the photocatalytic performance of nanomaterials.

Enhanced activity of α-Fe2O3 for photocatalytic NO removal

Unique electrospun α-Fe₂O₃ fibers of singular nano-architecture were obtained exhibiting a highly enhanced NO conversion photocatalytic efficiency

Acetate-induced controlled-synthesis of hematite polyhedra enclosed by high-activity facets for enhanced photocatalytic performance

Uniform hematite polyhedra enclosed by high-activity facets could be selectively synthesized by acetates-induced synthetic strategy.

α-Fe2O3 concave and hollow nanocrystals: top-down etching synthesis and their comparative photocatalytic activities

Top-down etching synthesis of α-Fe₂O₃ concave and hollow nanocrystals.

α-Fe2O3 quantum dots: low-cost synthesis and photocatalytic oxygen evolution capabilities

Hematite quantum dots with an average size of 3 nm are synthesized by a facile microwave-assisted reverse micelle method.

A Hierarchical Z-Scheme CdS-WO3 Photocatalyst with Enhanced CO2 Reduction Activity

The development of an artificial photosynthetic system is a promising strategy to convert solar energy into chemical fuels. Here, a direct Z-scheme CdS-WO(3) photocatalyst without an electron mediator is fabricated by imitating natural photosynthesis of green plants. Photocatalytic activities of as-prepared samples are evaluated on the basis of photocatalytic CO(2) reduction to form CH(4) under visible light irradiation. These Z-scheme-heterostructured samples show a higher photocatalytic CO(2) reduction than single-phase photocatalysts. An optimized CdS-WO(3) heterostructure sample exhibits the highest CH(4) production rate of 1.02 μmol h(-1) g(-1) with 5 mol% CdS content, which exceeds the rates observed in single-phase WO(3) and CdS samples for approximately 100 and ten times under the same reaction condition, respectively. The enhanced photocatalytic activity could be attributed to the formation of a hierarchical direct Z-scheme CdS-WO(3) photocatalyst, resulting in an efficient spatial separation of photo-induced electron-hole pairs. Reduction and oxidation catalytic centers are maintained in two different regions to minimize undesirable back reactions of the photocatalytic products. The introduction of CdS can enhance CO(2) molecule adsorption, thereby accelerating photocatalytic CO(2) reduction to CH(4). This study provides novel insights into the design and fabrication of high-performance artificial Z-scheme photocatalysts to perform photocatalytic CO(2) reduction.

Faceted metal and metal oxide nanoparticles: design, fabrication and catalysis

The review addresses new advances in metal, bimetallic, metal oxide, and composite particles in their nanoregime for facet-selective catalytic applications. The synthesis and growth mechanisms of the particles have been summarized in brief in this review with a view to develop critical examination of the faceted morphology of the particles for catalysis. The size, shape and composition of the particles have been found to be largely irrelevant in comparison to the nature of facets in catalysis. Thus selective high- and low-index facets have been found to selectively promote adsorption, which eventually leads to an effective catalytic reaction. As a consequence, a high density of atoms rest at the corners, steps, stages, kinks etc on the catalyst surface in order to host the adsorbate efficiently and catalyze the reaction. Again, surface atomic arrangement and bond length have been found to play a dominant role in adsorption, leading to effective catalysis.

Insights into the structure-photoreactivity relationships in well-defined perovskite ferroelectric KNbO3 nanowires

1D perovskite-type orthorhombic KNbO₃ nanowires display RhB photodegradation about two-fold as large as their monoclinic counterparts and a synergy between ferroelectric polarization and electronic structure in photoreactivity enhancement is uncovered.

Structure–function correlations are a central theme in heterogeneous (photo)catalysis. In this study, the geometric and electronic structure of perovskite ferroelectric KNbO₃ nanowires with respective orthorhombic and monoclinic polymorphs have been systematically addressed. By virtue of aberration-corrected scanning transmission electron microscopy, we directly visualize surface photocatalytic active sites, measure local atomic displacements at an accuracy of several picometers, and quantify ferroelectric polarization combined with first-principles calculations. The photoreactivity of the as-prepared KNbO₃ nanowires is assessed toward aqueous rhodamine B degradation under UV light. A synergy between the ferroelectric polarization and electronic structure in photoreactivity enhancement is uncovered, which accounts for the prominent reactivity order: orthorhombic > monoclinic. Additionally, by identifying new photocatalytic products, rhodamine B degradation pathways involving N-deethylation and conjugated structure cleavage are proposed. Our findings not only provide new insights into the structure–photoreactivity relationships in perovskite ferroelectric photocatalysts, but also have broad implications in perovskite-based water splitting and photovoltaics, among others.

Novel hollow α-Fe2O3 nanofibers via electrospinning for dye adsorption

Nanomaterials such as iron oxides and ferrites have been intensively investigated for water treatment and environmental remediation applications. In this work, hollow α-Fe2O3 nanofibers made of rice-like nanorods were successfully synthesized via a simple hydrothermal reaction on polyvinyl alcohol (PVA) nanofiber template followed by calcination. The crystallographic structure and the morphology of the as-prepared α-Fe2O3 nanofibers were characterized by X-ray diffraction, energy dispersive X-ray spectrometer, and scanning electron microscope. Batch adsorption experiments were conducted, and ultraviolet-visible spectra were recorded before and after the adsorption to investigate the dye adsorption performance. The results showed that hollow α-Fe2O3 fiber assembles exhibited good magnetic responsive performance, as well as efficient adsorption for methyl orange in water. This work provided a versatile strategy for further design and development of functional nanofiber-nanoparticle composites towards various applications.

Polymeric photocatalysts based on graphitic carbon nitride

Semiconductor-based photocatalysis is considered to be an attractive way for solving the worldwide energy shortage and environmental pollution issues. Since the pioneering work in 2009 on graphitic carbon nitride (g-C3N4) for visible-light photocatalytic water splitting, g-C3N4 -based photocatalysis has become a very hot research topic. This review summarizes the recent progress regarding the design and preparation of g-C3N4 -based photocatalysts, including the fabrication and nanostructure design of pristine g-C3N4 , bandgap engineering through atomic-level doping and molecular-level modification, and the preparation of g-C3N4 -based semiconductor composites. Also, the photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal cocatalysts, and Z-scheme heterojunctions. Finally, the concluding remarks are presented and some perspectives regarding the future development of g-C3N4 -based photocatalysts are highlighted.

Effects of morphology and exposed facets of α-Fe2O3 nanocrystals on photocatalytic water oxidation

The catalytic activity of α-Fe₂O₃ nanocubes, nanoplates, nanoflakes and nanoparticles for visible light-driven water oxidation is strongly morphology-dependent; α-Fe₂O₃ nanocubes with exposed {012} facets exhibit far higher activity than nanosheets with exposed {001} facets.

Cubic anatase TiO2 nanocrystals with enhanced photocatalytic CO2 reduction activity

Anatase TiO₂ nanocubes with exposed {100} and {001} facets show especially high photocatalytic activity toward CO₂ reduction to methane and methanol.