Silicon nanohybrid-based surface-enhanced Raman scattering sensors

Recent advancements in the extraction and analysis of phthalate acid esters in food samples

Phthalate acid esters (PAEs) are ubiquitous environmental pollutants present in food samples, necessitating accurate detection for risk assessment and remediation efforts. This review provides an updated overview of the recent progress on the PAEs analysis regarding sample pretreatment techniques and analytical methodologies over the latest decade. Advances in sample preparation include solid-based extraction techniques replacing conventional liquid-liquid extraction, with solid sorbents emerging as promising alternatives due to their minimal solvent consumption and enhanced selectivity. Although techniques like the microextraction methods offer versatility and reduced solvent reliance, there is a need for more efficient and environmentally friendly techniques enabling on-site portable detection. High-resolution mass spectrometry is increasingly utilized for its enhanced sensitivity and reduced contamination risks. However, challenges persist in developing in situ analytical techniques for trace PAEs in complex food samples. Future research should prioritize novel analytical techniques with superior sensitivity and selectivity, addressing current limitations to meet the demand for precise PAEs detection in diverse food matrices.

Noninvasive surface-enhanced Raman spectroscopy outperforms combined positive score in predicting sensitivity to neoadjuvant immunotherapy in head and neck squamous cell carcinoma

BACKGROUND

Head and neck squamous cell carcinoma poses a formidable treatment challenge owing to its complex anatomy and essential functions of the organs involved. Neoadjuvant immunotherapies, particularly PD-1 inhibitors, have shown promise in improving patient outcomes. Nevertheless, the ability to accurately predict which patients will benefit from neoadjuvant immunotherapy continues to be a significant hurdle.

METHODS

We investigated 46 patients diagnosed with head and neck squamous cell carcinoma. Combined positive score was assessed before treatment. Serum samples were collected both before and after neoadjuvant immunotherapy, and subsequently analyzed utilizing surface-enhanced Raman spectroscopy.

RESULTS

Significant differences in Raman spectral peaks were observed between the partial response and stable disease groups before treatment, particularly in the regions of 516-525 cm-1, 1240-1400 cm-1, 1600-1636 cm-1, and 1647-1680 cm-1. These peaks represent different cancer-related biochemical components, including protein and nucleic acid vibrations, disulfide bonds, amide III bands, CH2/CH3 deformations, and amide I bands. Principal Component Analysis-Linear Discriminant Analysis and Receiver Operating Characteristic analysis demonstrated that surface-enhanced Raman spectroscopy exhibited remarkable sensitivity and specificity, surpassing the combined positive score in assessing patient responses to neoadjuvant immunotherapy.

CONCLUSION

Surface-enhanced Raman spectroscopy offers significant potential to surpass the conventional combined positive score in predicting responses to neoadjuvant immunotherapy.

A dual-signaling surface-enhanced Raman spectroscopy ratiometric strategy for ultrasensitive Hg2+ detection based on Au@Ag/COF composites

Heavy metal ion pollution poses significant risks to human health and ecological systems, and its monitoring is important. A sensitive and accurate surface-enhanced Raman spectroscopy (SERS) detection assay for Hg2+ was developed using Au@Ag/COF substrates and Y-shaped DNA labeled with two Raman reporters. The Au@Ag NPs in the COF produced robust and uniform E-fields, improving their detection reproducibility. The Y-shaped DNA design increased sensitivity with a low detection limit of 5.0 × 10-16 M by bringing the Raman reporter closer to the substrate surface. Additionally, the use of two Raman reporters allowed for a ratiometric method, improving detection accuracy by detecting both "signal-off" and "signal-on" signals. This selective sensor exhibited excellent recovery in river water, tap water, and milk samples, showcasing its robust biosensing capability for the detection of Hg2+ and its potential for sensing other heavy-metal ions in food and environmental applications.

Soft surface-enhanced Raman scattering sensing platform based on an oil-in-water emulsion stabilized by silver nanoparticles

Pickering emulsions are excellent candidates for developing soft biosensors utilized for detecting native biomolecules such as peptides and proteins through the Surface-Enhanced Raman Spectroscopy (SERS) transduction mechanism. Here, we have developed a SERS sensor based on oil-in-water Pickering emulsions stabilized by Ag nanoparticles (Ag-NPs) with the Raman active molecule (4-Aminothiphenol, 4ATP) adsorbed to their surface. The structural properties and composition of the Pickering emulsion were tuned to meet the demands of the maximal optical response. Our results show that the obtained SERS signals of the main studied Pickering emulsion (water: oil ratio 7:3, 1 wt% Ag-NPs) outperformed colloidal dispersions with the same Ag-NPs concentration by 10-fold at any studied content of 4ATP. The superior optical response of the Pickering emulsion compared to the colloidal dispersion can thus pave the way for the detection of a large variety of analytes at high sensitivity by a soft sensing device. This study innovates by comparing the SERS signals of Raman-active Ag-NPs when they are assembled at the oil/water interface of an emulsion to the case where the NPs are individually dispersed in the medium. The findings shed light on the edit value of utilizing Raman-active Pickering stabilizers for biosensing applications.

A super-hydrophobic perfluoropolyether coated polytetrafluoroethylene sheets substrate for detection of acetamiprid surface-enhanced Raman spectroscopy

In this paper, a hydrophobic substrate as concentrators including an inner layer of polytetrafluoroethylene (PTFE) and an outer layer covered a thin layer of perfluoropolyether (PFPE) was constructed to achieve a higher sensitivity for acetamiprid (AC) SERS detection. The condensation effect of the PTFE-PFPE hydrophobic substrate-induced aggregation of gold nanoparticles (Au NPs) result ''hot spots'' for SERS. The hydrophobic substrate is better reproducibility (RSD < 5%) compared with that on a conventional silicon wafer. A further application of the hydrophobic substrate was demonstrated by the detection of AC in tea samples within a detection range of 0.03 mg/L to 3 mg/L. The hydrophobic substrate eliminates the problem of solution diffusion to avoid the "coffee ring" effect (When a droplet adheres to a solid surface, the suspended molecular particles usually deposit on the edge of the droplet to form a ring).

Structuring of Si into Multiple Scales by Metal-Assisted Chemical Etching

Structuring Si, ranging from nanoscale to macroscale feature dimensions, is essential for many applications. Metal-assisted chemical etching (MaCE) has been developed as a simple, low-cost, and scalable method to produce structures across widely different dimensions. The process involves various parameters, such as catalyst, substrate doping type and level, crystallography, etchant formulation, and etch additives. Careful optimization of these parameters is the key to the successful fabrication of Si structures. In this review, recent additions to the MaCE process are presented after a brief introduction to the fundamental principles involved in MaCE. In particular, the bulk-scale structuring of Si by MaCE is summarized and critically discussed with application examples. Various approaches for effective mass transport schemes are introduced and discussed. Further, the fine control of etch directionality and uniformity, and the suppression of unwanted side etching are also discussed. Known application examples of Si macrostructures fabricated by MaCE, though limited thus far, are presented. There are significant opportunities for the application of macroscale Si structures in different fields, such as microfluidics, micro-total analysis systems, and microelectromechanical systems, etc. Thus more research is necessary on macroscale MaCE of Si and their applications.

Surface-enhanced Raman scattering holography chip for rapid, sensitive and multiplexed detection of human breast cancer-associated MicroRNAs in clinical samples

MicroRNAs (miRNAs) are promising biomarkers for the early diagnosis of breast cancer. Yet, simultaneous achievement of rapid, sensitive and accurate detection of diverse miRNAs in clinical samples is still challenging due to the low abundance of miRNAs and the complex procedures of RNA extraction and separation. Herein, we develop an innovative three-dimensional (3D) surface-enhanced Raman scattering (SERS) holography sensing strategy for rapid, sensitive and multiplexed detection of human breast cancer-associated miRNAs. To establish a proof of concept, nine kinds of human breast cancer-associated miRNAs are isothermally amplified by Exonuclease (Exo) III enzyme, and the products could be spatially separated to corresponding sensing region on silicon SERS substrates. Each region has been modified with corresponding hairpin DNA probes, which are used to identify and quantify the miRNAs. Different DNA probes are labeled with different Raman reporters, which serve as "SERS tags" to incorporate spectroscopic information into computer-generated 3D SERS hologram within ~9 min. We demonstrate that 3D SERS holography chip not only achieves an ultrahigh sensitivity down to ~1 aM but also feature a high correlation with RT-qPCR in the detection of nine miRNAs in 30 clinical serum samples. This work provides a feasible tool to improve the diagnosis of breast cancer.

Covalent Organic Framework Composites: Synthesis and Analytical Applications

In the recent years, composite materials containing covalent organic frameworks (COFs) have raised increasing interest for analytical applications. To date, various synthesis techniques have emerged that allow for the preparation of crystalline and porous COF composites with various materials. Herein, we summarize the most common methods used to gain access to crystalline COF composites with magnetic nanoparticles, other oxide materials, graphene and graphene oxide, and metal nanoparticles. Additionally, some examples of stainless steel, polymer, and metal-organic framework composites are presented. Thereafter, we discuss the use of these composites for chromatographic separation, environmental remediation, and sensing.

A novel nucleic acid amplification system based on nano-gap embedded active disk resonators

Recent advances in nucleic acid based testing using bio-optical sensor approaches have been introduced but most are based on hybridization between the optical sensor and the bio-molecule and not on an amplification mechanism. Direct nucleic acid amplification on an optical sensor has several technical limitations, such as the sensitivity of the temperature sensor, instrument complexity, and high background signal. We here describe a novel nucleic acid amplification method based on a whispering gallery mode active resonator and discuss its potential molecular diagnostic application. By implanting nanoclusters as active compounds, this active resonator operates without tapered fiber coupling and emits a strong photoluminescence signal with low background in the wavelength of low absorption in an aqueous environment that is typical of biosensors. Our method also offers an extremely low detection threshold down to a single copy within 10 min due to the strong light-matter interaction in a nano-gap structure. We envision that this active resonator provides a high refractive index contrast for tight mode confinement with simple alignment as well as the possibility of reducing the device size so that a point-of-care system with low-cost, high-sensitivity and simplicity.

A multifunctional plasmonic chip for bacteria capture, imaging, detection, and in situ elimination for wound therapy

A multifunctional plasmonic gold chip has been constructed for early diagnosis and highly effective killing of bacteria, which is critical for human health. The chip features high bacterial capture efficiency, plasmon-enhanced fluorescence (PEF) and surface-enhanced Raman scattering (SERS) and can act as a highly sensitive sensor for dual-mode bacteria imaging and detection (down to 102 CFU mL-1) with good reliability and accuracy. The developed assay can distinguish Gram-positive S. aureus bacteria from Gram-negative E. coli bacteria, providing valuable information for therapy. Importantly, the chip presents excellent photothermal antibacterial activity (98%) and can inactivate both Gram-positive and Gram-negative bacteria in situ. Furthermore, the chip was used to effectively promote the wound healing process in bacteria infected mice in vivo, showing great potential for antibacterial applications.

Hierarchically Ordered Silicon Metastructures from Improved Self-Assembly-Based Nanosphere Lithography

We developed an improved self-assembly method to obtain a large-area, high-quality templated monolayer mask using the polystyrene spheres. On the basis of the templated mask, hierarchically ordered Si metastructures with different nanosteps are fabricated using cyclic inductively coupled plasma etching technique. By evaporating a thin gold capping layer on these Si metastructures, their optical properties are comparatively studied using the surface-enhanced Raman scattering spectroscopy. Our proposed technique is highly promising for fabricating a variety of periodic three-dimensional hierarchically ordered metastructures, which could be further utilized for applications in SERS-based biosensors, optical absorbers, metamaterial/metasurface devices, etc.

Biomimetic preparation of core-shell structured surface-enhanced Raman scattering substrate with antifouling ability, good stability, and reliable quantitative capability

The fouling and stability are two most critical limiting factors for practical applications of surface-enhanced Raman scattering (SERS)-based microfluidic electrophoresis device. Herein, we present a novel biomimetic nanoengineering strategy to achieve a SERS substrate featuring antifouling ability, good stability, and reliable quantitative capability. Typically, by employing tea polyphenol as the reducing agent, the substrate made of silver core-gold shell nanostructures in situ grown on silicon wafer surface is fabricated. The core-shell nanostructures are further embedded with internal standard molecules. Remarkably, the fabricated substrate preserves distinct SERS effects, adaptable reproducibility, and reliable quantitative ability even if the substrate is incubated with 15% H₂ O₂ , 13% HNO₃ , or 10⁸  CFU/mL bacteria, or suffered from 12-day continuous vibration at 250 rpm/min in PBS buffer. As a proof-of-concept application, the DNA-functionalized substrate is capable of precise quantification of Hg²⁺ with a limit of detection down to ca. 1 pM even in sewage water.

Fabrication and SERS Performances of Metal/Si and Metal/ZnO Nanosensors: A Review

Surface-enhanced Raman scattering (SERS) sensors are very powerful analytical tools for the highly sensitive detection of chemical and biological molecules. Substantial efforts have been devoted to the design of a great number of hybrid SERS substrates such as silicon or zinc oxide nanosystems coated with gold/silver nanoparticles. By comparison with the SERS sensors based on Au and Ag nanoparticles/nanostructures, higher enhancement factors and excellent reproducibilities are achieved with hybrid SERS nanosensors. This enhancement can be due to the appearance of hotspots located at the interface between the metal (Au/Ag) and the semiconducting substrates. Thus, in this last decade, great advances in the domain of hybrid SERS nanosensors have occurred. In this short review, the recent advances of these hybrid metal-coated semiconducting nanostructures as SERS sensors of chemical and biological molecules are presented.

Light Concentration by Metal-Dielectric Micro-Resonators for SERS Sensing

Metal-dielectric micro/nano-composites have surface plasmon resonances in visible and near-infrared domains. Excitation of coupled metal-dielectric resonances is also important. These different resonances can allow enhancement of the electromagnetic field at a subwavelength scale. Hybrid plasmonic structures act as optical antennae by concentrating large electromagnetic energy in micro- and nano-scales. Plasmonic structures are proposed for various applications such as optical filters, investigation of quantum electrodynamics effects, solar energy concentration, magnetic recording, nanolasing, medical imaging and biodetection, surface-enhanced Raman scattering (SERS), and optical super-resolution microscopy. We present the review of recent achievements in experimental and theoretical studies of metal-dielectric micro and nano antennae that are important for fundamental and applied research. The main impact is application of metal-dielectric optical antennae for the efficient SERS sensing.

Sensitive and Reproducible Immunoassay of Multiple Mycotoxins Using Surface-Enhanced Raman Scattering Mapping on 3D Plasmonic Nanopillar Arrays

A surface-enhanced Raman scattering-based mapping technique is reported for the highly sensitive and reproducible analysis of multiple mycotoxins. Raman images of three mycotoxins, ochratoxin A (OTA), fumonisin B (FUMB), and aflatoxin B1 (AFB1) are obtained by rapidly scanning the surface-enhanced Raman scattering (SERS) nanotags-anchoring mycotoxins captured on a nanopillar plasmonic substrate. In this system, the decreased gap distance between nanopillars by their leaning effects as well as the multiple hot spots between SERS nanotags and nanopillars greatly enhances the coupling of local plasmonic fields. This strong enhancement effect makes it possible to perform a highly sensitive detection of multiple mycotoxins. In addition, the high uniformity of the densely packed nanopillar substrate minimizes the spot-to-spot fluctuations of the Raman peak intensity in the scanned area when Raman mapping is performed. Consequently, this makes it possible to gain a highly reproducible quantitative analysis of mycotoxins. The limit of detections (LODs) are determined to be 5.09, 5.11, and 6.07 pg mL^-1 for OTA, FUMB, and AFB1, and these values are approximately two orders of magnitude more sensitive than those determined by the enzyme-linked immunosorbent assays. It is believed that this SERS-based mapping technique provides a facile tool for the sensitive and reproducible quantification of various biotarget molecules.

Binding of p-mercaptobenzoic acid and adenine to gold-coated electroless etched silicon nanowires studied by surface-enhanced Raman scattering

Modern diagnostic tools ever aim to reduce the amount of analyte and the time needed for obtaining the result. Surface-enhanced Raman spectroscopy is a method that could satisfy both of these requirements, provided that for each analyte an adequate substrate is found. Here we demonstrate the ability of gold-sputtered silicon nanowires (SiNW) to bind p-mercaptobenzoic acid in 10^-3, 10^-4 and 10^-5M and adenine in 30 and 100μM concentrations. Based on the normal mode analysis, presented here for the first time, the binding of p-mercaptobenzoic acid is deduced. The intensity enhancement of the 1106cm^-1 band is explained by involvement of the CS stretching deformation, and the appearance of the broad 300cm^-1 band attributed to SAu stretching mode. Adenine SERS spectra demonstrate the existence of the 7H tautomer since the strongest band observed is at 736cm^-1. The adenine binding is likely to occur in several ways, because the number of observed bands in the 1200-1600cm^-1 interval exceeds the number of observed bands in the normal Raman spectrum of the free molecule.

A Graphene-Silver Nanoparticle-Silicon Sandwich SERS Chip for Quantitative Detection of Molecules and Capture, Discrimination, and Inactivation of Bacteria

There currently exists increasing concerns on the development of a kind of high-performance SERS platform, which is suitable for sensing applications ranging from the molecular to cellular (e.g., bacteria) level. Herein, we develop a novel kind of universal SERS chip, made of graphene (G)-silver nanoparticle (AgNP)-silicon (Si) sandwich nanohybrids (G@AgNPs@Si), in which AgNPs are in situ grown on a silicon wafer through hydrofluoric acid-etching-assisted chemical reduction, followed by coating with single-layer graphene via a polymer-protective etching method. The resultant chip features a strong, stable, reproducible surface-enhanced Raman scattering (SERS) effect and reliable quantitative capability. By virtues of these merits, the G@AgNPs@Si platform is capable for not only molecular detection and quantification but also cellular analysis in real systems. As a proof-of-concept application, the chip allows ultrahigh sensitive and reliable detection of adenosine triphosphate (ATP), with a detection limit of ∼1 pM. In addition, the chip, serving as a novel multifunctional platform, enables simultaneous capture, discrimination, and inactivation of bacteria. Typically, the bacterial capture efficiency is 54% at 10⁸ CFU mL^-1 bacteria, and the antibacterial rate reaches 93% after 24 h of treatment. Of particular note, Escherichia coli and Staphylococcus aureus spiked into blood can be readily distinguished via the chip, suggesting its high potential for clinical applications.

Culture-Free Detection of Bacterial Pathogens on Plasmonic Nanopillar Arrays Using Rapid Raman Mapping

We utilized a fast Raman spectral mapping technique for fast detection of bacterial pathogens. Three-dimensional (3D) plasmonic nanopillar arrays were fabricated using the nanolithography-free process consisting of maskless Ar plasma treatment of a polyethylene terephthalate substrate and subsequent metal deposition. Bacterial pathogens were immobilized on the positively charged poly(l-lysine)-coated 3D plasmonic substrate through electrostatic interactions. Then, the bacterial surfaces were selectively labeled with antibody-conjugated surface-enhanced Raman scattering (SERS) nanotags, and Raman mapping images were collected and statistically analyzed for quantitative analysis of bacteria. Salmonella typhimurium was selected as a model pathogen bacterium to confirm the efficacy of our SERS imaging technique. Minimum number of Raman mapping points with statistical reliability was determined to reduce assay time. It was possible to get a statistically reliable standard calibration curve for 529 pixels (laser spot with 60 μm interval), which required a total mapping time of 45 min to get a standard calibration curve for five different concentrations of bacteria in the 0 to 10⁶ CFU/mL range. No amplification step was necessary for quantification because low-abundance target bacteria could be measured using the Raman spectral mapping technique. Therefore, this approach allows accurate quantification of bacterial pathogens without any culturing or enrichment process.

Probing and Quantifying the Food-Borne Pathogens and Toxins: From In Vitro to In Vivo

Development of real-time and in situ analytical methods for determination of food-borne pathogens and toxins ingested into the human body would be a promising research direction in the food-safety area. The present perspective starts with summarization of the up-to-date progress of the nanomaterial-assisted in vitro detection methods for pathogens and toxins and finally focuses on application of animal bioimaging to in vivo study, including prospective strategies for in vivo quantification of target pathogens or toxins and in vivo investigation of their behaviors inside the living body, with the assistance of real-time and non-invasive optical bioimaging. This perspective provides the advisory direction for food-safety research, from in vitro to in vivo, along with a prospective discussion of the further development roadmap of the food-safety detection techniques, especially the bioimaging-guided methods for investigation and mediation of the food contamination effect to human health.

Fabrication of plasmonic cavity arrays for SERS analysis

The plasmonic cavity arrays are ideal substrates for surface enhanced Raman scattering analysis because they can provide hot spots with large volume for analyte molecules. The large area increases the probability to make more analyte molecules on hot spots and leads to a high reproducibility. Therefore, to develop a simple method for creating cavity arrays is important. Herein, we demonstrate how to fabricate a V and W shape cavity arrays by a simple method based on self-assembly. Briefly, the V and W shape cavity arrays are respectively fabricated by taking KOH etching on a nanohole and a nanoring array patterned silicon (Si) slides. The nanohole array is generated by taking a reactive ion etching on a Si slide assembled with monolayer of polystyrene (PS) spheres. The nanoring array is generated by taking a reactive ion etching on a Si slide covered with a monolayer of octadecyltrichlorosilane before self-assembling PS spheres. Both plasmonic V and W cavity arrays can provide large hot area, which increases the probability for analyte molecules to deposit on the hot spots. Taking 4-Mercaptopyridine as analyte probe, the enhancement factor can reach 2.99 × 10⁵ and 9.97 × 10⁵ for plasmonic V cavity and W cavity array, respectively. The relative standard deviations of the plasmonic V and W cavity arrays are 6.5% and 10.2% respectively according to the spectra collected on 20 random spots.

A new heterostructured SERS substrate: free-standing silicon nanowires decorated with graphene-encapsulated gold nanoparticles

Heterostructures of one-dimensional nanowire supported graphene/plasmonic nanoparticles are promising for future SERS-based chemical sensors. In this paper, we report a novel heterostructured SERS substrate composed of free-standing Si nanowires and surface-decorating Au/graphene nanoparticles. We successfully developed a unique CVD approach for the cost-effective and large-scale growth of free-standing Si nanowires. Au nanoparticles were decorated on the Si nanowires using a galvanic deposition - an annealing approach. This was followed by the selective growth of a multilayer graphene shell on the Au nanoparticles via a xylene-based CVD approach. Discrete dipole approximation simulation was used to understand the plasmonic properties of these Si nanowire-based heterostructures. The results indicate that the incorporation of Au nanoparticles and graphene on Si nanowires has a significant influence on their light absorption and scattering properties. Meanwhile, a strong surface plasmon coupling was observed at the interface regions of different materials (e.g., Si/Au, Au/graphene), introducing multiple co-enhanced "hot spots" on the heterostructures. We found that our new heterostructures have a combined effect of an electromagnetic mechanism and a chemical mechanism for SERS and demonstrate an enhancement factor of 10⁶-10⁷.

Flexible, Transparent, and Free-Standing Silicon Nanowire SERS Platform for in Situ Food Inspection

We demonstrated a flexible transparent and free-standing Si nanowire paper (SiNWP) as a surface enhanced Raman scattering (SERS) platform for in situ chemical sensing on warping surfaces with high sensitivity. The SERS activity has originated from the three-dimension interconnected nanowire network structure and electromagnetic coupling between closely separated nanowires in the SiNWP. In addition, the SERS activity can be highly improved by functionalizing the SiNWP with plasmonic Au nanoparticles. The hybrid substrate not only showed excellent reproducibility and stability of the SERS signal, but also maintained the flexibility and transparency of the pristine SiNWP. To demonstrate its potential application in food inspection, the Au nanoparticles-modified SiNWP was directly wrapped onto the lemon surface for in situ identification and detection of the pesticide residues. The results showed that the excellent SERS activity and transparency of the hybrid substrate enabled the detection of the pesticides down to 72 ng/cm², which was much lower than the permitted residue dose in food safety.

Large-Area Au-Nanoparticle-Functionalized Si Nanorod Arrays for Spatially Uniform Surface-Enhanced Raman Spectroscopy

In this study, large-area hexagonal-packed Si nanorod (SiNR) arrays in conjunction with Au nanoparticles (AuNPs) were fabricated for surface-enhanced Raman spectroscopy (SERS). We have achieved ultrasensitive molecular detection with high reproducibility and spatial uniformity. A finite-difference time-domain simulation suggests that a wide range of three-dimensional electric fields are generated along the surfaces of the SiNR array. With the tuning of the gap and diameter of the SiNRs, the produced long decay length (>130 nm) of the enhanced electric field makes the SERS substrate a zero-gap system for ultrasensitive detection of large biomolecules. In the detection of R6G molecules, our SERS system achieved an enhancement factor of >10⁷ with a relative standard deviation as small as 3.9-7.2% over 30 points across the substrate. More significantly, the SERS substrate yielded ultrasensitive Raman signals on long amyloid-β fibrils at the single-fibril level, which provides promising potentials for ultrasensitive detection of amyloid aggregates that are related to Alzheimer's disease. Our study demonstrates that the SiNRs functionalized with AuNPs may serve as excellent SERS substrates in chemical and biomedical detection.

AuNPs/COFs as a new type of SERS substrate for sensitive recognition of polyaromatic hydrocarbons

A new SERS substrate was prepared via 1 min self-assembly of Au NPs to COFs for the sensitive recognition of PAHs.

A highly sensitive SERS-based platform for Zn(ii) detection in cellular media

HBA SERS peak frequency shifts in response to coordination are used to analyze the concentration of Zn(ii) with ultra-high sensitivity.

Plasmon-enhanced fluorescence imaging with silicon-based silver chips for protein and nucleic acid assay

Metal-enhanced fluorescence shows great potential for improving the sensitivity of fluoroscopy, which has been widely used in protein and nucleic acid detection for biosensor and bioassay applications. In comparison with the traditional glass-supported metal nanoparticles (MNPs), the introduction of a silicon substrate has been shown to provide an increased surface-enhanced Raman scattering (SERS) effect due to the coupling between the MNPs and the semiconducting silicon substrate. In this work, we further study the fluorescence-enhanced effect of the silicon-supported silver-island (Ag@Si) plasmonic chips. In particular, we investigate their practical application of improving the traditional immunoassay such as the biotin-streptavidin-based protein assay and the protein-/nucleic acid-labeled cell and tissue samples. The protein assay shows a wavelength-dependent enhancement effect of the Ag@Si chip, with an enhancement factor ranging from 1.2 (at 532 nm) to 57.3 (at 800 nm). Moreover, for the protein- and nucleic acid-labeled cell and tissue samples, the Ag@Si chip provides a fluorescence enhancement factor of 3.0-4.1 (at 800 nm) and a significant improvement in the signal/background ratio for the microscopy images. Such a ready accommodation of the fluorescence-enhanced effect for the immunoassay samples with simple manipulations indicates broad potential for applications of the Ag@Si chip not only in biological studies but also in the clinical field.

Raman scattering mediated by neighboring molecules

Raman scattering is most commonly associated with a change in vibrational state within individual molecules, the corresponding frequency shift in the scattered light affording a key way of identifying material structures. In theories where both matter and light are treated quantum mechanically, the fundamental scattering process is represented as the concurrent annihilation of a photon from one radiation mode and creation of another in a different mode. Developing this quantum electrodynamical formulation, the focus of the present work is on the spectroscopic consequences of electrodynamic coupling between neighboring molecules or other kinds of optical center. To encompass these nanoscale interactions, through which the molecular states evolve under the dual influence of the input light and local fields, this work identifies and determines two major mechanisms for each of which different selection rules apply. The constituent optical centers are considered to be chemically different and held in a fixed orientation with respect to each other, either as two components of a larger molecule or a molecular assembly that can undergo free rotation in a fluid medium or as parts of a larger, solid material. The two centers are considered to be separated beyond wavefunction overlap but close enough together to fall within an optical near-field limit, which leads to high inverse power dependences on their local separation. In this investigation, individual centers undergo a Stokes transition, whilst each neighbor of a different species remains in its original electronic and vibrational state. Analogous principles are applicable for the anti-Stokes case. The analysis concludes by considering the experimental consequences of applying this spectroscopic interpretation to fluid media; explicitly, the selection rules and the impact of pressure on the radiant intensity of this process.

Highly sensitive and reproducible silicon-based surface-enhanced Raman scattering sensors for real applications

During the past few decades, thanks to silicon nanomaterials’ outstanding properties, different dimensional silicon nanostructures have been employed for designing and fabricating high-performance surface-enhanced Raman scattering (SERS) sensors for chemical and biological detection.

A Dispersion-Dominated Chromogenic Strategy for Colorimetric Sensing of Glutathione at the Nanomolar Level Using Gold Nanoparticles

A dispersion-dominated chromogenic strategy for glutathione sensing is developed. Glutathione prevents the aggregation of arginine-modified gold nanoparticles via mercury-thiol interaction, which allows for glutathione sensing at the nanomolar level (10.9 × 10(-9) m) with facile operation and naked-eye readout.

Silicon nanostructures for cancer diagnosis and therapy

The emergence of nanotechnology suggests new and exciting opportunities for early diagnosis and therapy of cancer. During the recent years, silicon-based nanomaterials featuring unique properties have received great attention, showing high promise for myriad biological and biomedical applications. In this review, we will particularly summarize latest representative achievements on the development of silicon nanostructures as a powerful platform for cancer early diagnosis and therapy. First, we introduce the silicon nanomaterial-based biosensors for detecting cancer markers (e.g., proteins, tumor-suppressor genes and telomerase activity, among others) with high sensitivity and selectivity under molecular level. Then, we summarize in vitro and in vivo applications of silicon nanostructures as efficient nanoagents for cancer therapy. Finally, we discuss the future perspective of silicon nanostructures for cancer diagnosis and therapy.

Morphological evolution of gold nanoparticles on silicon nanowires and their plasmonics

One-dimensional heterostructures composed of silicon (Si) nanowires and uniformly decorated with gold (Au) nanoparticles were fabricated and used as a substrate for organic detection based on the surface-enhanced Raman spectroscopy.

A portable microcolumn based on silver nanoparticle functionalized glass fibers and its SERS application

We presented a facile method for the preparation of a portable detection column integrated with silver nanoparticle (Ag NP) functionalized glass fibers for surface-enhanced Raman scattering (SERS).