TiO2 Nanorod Array Constructed Nanotopography for Regulation of Mesenchymal Stem Cells Fate and the Realization of Location-Committed Stem Cell Differentiation

Size-Optimized Layered Double Hydroxide Nanoparticles Promote Neural Progenitor Cells Differentiation of Embryonic Stem Cells Through the Regulation of M6A Methylation

Purpose

The committed differentiation fate regulation has been a difficult problem in the fields of stem cell research, evidence showed that nanomaterials could promote the differentiation of stem cells into specific cell types. Layered double hydroxide (LDH) nanoparticles possess the regulation function of stem cell fate, while the underlying mechanism needs to be investigated. In this study, the process of embryonic stem cells (ESCs) differentiate to neural progenitor cells (NPCs) by magnesium aluminum LDH (MgAl-LDH) was investigated.

Methods

MgAl-LDH with diameters of 30, 50, and 100 nm were synthesized and characterized, and their effects on the cytotoxicity and differentiation of NPCs were detected in vitro. Dot blot and MeRIP-qPCR were performed to detect the level of m6A RNA methylation in nanoparticles-treated cells.

Results

Our work displayed that LDH nanoparticles of three different sizes were biocompatible with NPCs, and the addition of MgAl-LDH could significantly promote the process of ESCs differentiate to NPCs. 100 nm LDH has a stronger effect on promoting NPCs differentiation compared to 30 nm and 50 nm LDH. In addition, dot blot results indicated that the enhanced NPCs differentiation by MgAl-LDH was closely related to m6A RNA methylation process, and the major modification enzyme in LDH controlled NPCs differentiation may be the m6A RNA methyltransferase METTL3. The upregulated METTL3 by LDH increased the m6A level of Sox1 mRNA, enhancing its stability.

Conclusion

This work reveals that MgAl-LDH nanoparticles can regulate the differentiation of ESCs into NPCs by increasing m6A RNA methylation modification of Sox1.

Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior

Tantalum is receiving increasing attention in the biomedical field due to its biocompatible nature and superior mechanical properties. However, the bioinert nature of tantalum still poses a challenge and limits its integration into the bone tissue. To address these issues, we fabricated nanotubular (NT), nanocoral (NC), and nanodimple morphologies on tantalum surfaces via anodization. The size of these nanofeatures was engineered to be approximately 30 nm for all anodized samples. Thus, the influence of the anodized nanostructured morphology on the chemical and biological properties of tantalum was evaluated. The NT and NC samples exhibited higher surface roughness, surface energy, and hydrophilicity compared to the nonanodized samples. In addition, the NT samples exhibited the highest corrosion resistance among all of the investigated samples. Biological experiments indicated that NT and NC samples promoted human adipose tissue-derived mesenchymal stem cell (hADMSC) spreading and proliferation up to 5 days in vitro. ALP, COL1A1, and OSC gene expressions as well as calcium mineral synthesis were upregulated on the NT and NC samples in the second and third weeks in vitro. These findings highlight the significance of nanostructured feature morphology for anodized tantalum, where the NT morphology was shown to be a potential candidate for orthopedic applications.

Attributes of Nanomaterials and Nanotopographies for Improved Bone Tissue Engineering and Regeneration

Bone tissue engineering (BTE) is a multidisciplinary area that can solve the limitation of conventional grafting methods by developing viable and biocompatible bone replacements. The three essential components of BTE, i.e., Scaffold material and Cells and Growth factors altogether, facilitate support and guide for bone formation, differentiation of the bone tissues, and enhancement in the cellular activities and bone regeneration. However, there is a scarcity of the appropriate materials that can match the mechanical property as well as functional similarity to native tissue, considering the bone as hard tissue. In such scenarios, nanotechnology can be leveraged upon to achieve the desired aspects of BTE, and that is the key point of this review article. This review article examines the significant areas of nanotechnology research that have an impact on regeneration of bone: (a) scaffold with nanomaterials helps to enhance physicochemical interactions, biocompatibility, mechanical stability, and attachment; (b) nanoparticle-based approaches for delivering bioactive chemicals, growth factors, and genetic material. The article begins with the introduction of components and healing mechanisms of bone and the factors associated with them. The focus of this article is on the various nanotopographies that are now being used in scaffold formation, by describing how they are made, and how these nanotopographies affect the immune system and potential underlying mechanisms. The advantages of 4D bioprinting in BTE by using nanoink have also been mentioned. Additionally, we have investigated the importance of an in silico approach for finding the interaction between drugs and their related receptors, which can help to formulate suitable systems for delivery. This review emphasizes the role of nanoscale approach and how it helps to increase the efficacy of parameters of scaffold as well as drug delivery system for tissue engineering and bone regeneration.

Evaluating the cell migration potential of TiO2 nanorods incorporated in a Ti6Al4V scaffold: A multiscale approach

Improvement of cell migration by the nano-topographical modification of implant surface can directly or indirectly accelerate wound healing and osseointegration between bone and implant. Therefore, modification of the implant surface was done with TiO2 nanorod (NR) arrays to develop a more osseointegration-friendly implant in this study. Modulating the migration of a cell, adhered to a scaffold, by the variations of NR diameter, density and tip diameter in vitro is the primary objective of the study. The fluid structure interaction method was used, followed by the submodelling technique in this multiscale analysis. After completing a simulation over a global model, fluid structure interaction data was applied to the sub-scaffold finite element model to predict the mechanical response over cells at the cell-substrate interface. Special focus was given to strain energy density at the cell interface as a response parameter due to its direct correlation with the migration of an adherent cell. The results showed a huge rise in strain energy density after the addition of NRs on the scaffold surface. It also highlighted that variation in NR density plays a more effective role than the variation in NR diameter to control cell migration over a substrate. However, the effect of NR diameter becomes insignificant when the NR tip was considered. The findings of this study could be used to determine the best nanostructure parameters for better osseointegration.

Biomaterials based on hyaluronic acid, collagen and peptides for three-dimensional cell culture and their application in stem cell differentiation

In recent decades, three-dimensional (3D) cell culture technologies have been developed rapidly in the field of tissue engineering and regeneration, and have shown unique advantages and great prospects in the differentiation of stem cells. Herein, the article reviews the progress and advantages of 3D cell culture technologies in the field of stem cell differentiation. Firstly, 3D cell culture technologies are divided into two main categories: scaffoldless and scaffolds. Secondly, the effects of hydrogels scaffolds and porous scaffolds on stem cell differentiation in the scaffold category were mainly reviewed. Among them, hydrogels scaffolds are divided into natural hydrogels and synthetic hydrogels. Natural materials include polysaccharides, proteins, and their derivatives, focusing on hyaluronic acid, collagen and polypeptides. Synthetic materials mainly include polyethylene glycol (PEG), polyacrylic acid (PAA), polyvinyl alcohol (PVA), etc. In addition, since the preparation techniques have a large impact on the properties of porous scaffolds, several techniques for preparing porous scaffolds based on different macromolecular materials are reviewed. Finally, the future prospects and challenges of 3D cell culture in the field of stem cell differentiation are reviewed. This review will provide a useful guideline for the selection of materials and techniques for 3D cell culture in stem cell differentiation.

Functionalization of TiO2 for Better Performance as Orthopedic Implants

This review mainly focuses on the surface functionalization approaches of titanium dioxide (TiO₂) to prevent bacterial infections and facilitate osteointegration simultaneously for titanium (Ti)-based orthopedic implants. Infection is one of the major causes of implant failure. Meanwhile, it is also critical for the bone-forming cells to integrate with the implant surface. TiO₂ is the native oxide layer of Ti which has good biocompatibility as well as enriched physical, chemical, electronic, and photocatalytic properties. The formed nanostructures during fabrication and the enriched properties of TiO₂ have enabled various functionalization methods to combat the micro-organisms and enhance the osteogenesis of Ti implants. This review encompasses the various modifications of TiO₂ in aspects of topology, drug loading, and element incorporation, as well as the most recently developed electron transfer and electrical tuning approaches. Taken together, these approaches can endow Ti implants with better bactericidal and osteogenic abilities via the functionalization of TiO₂.

The influence of nanotopography on cell behaviour through interactions with the extracellular matrix – A review

Nanotopography presents an effective physical approach for biomaterial cell manipulation mediated through material-extracellular matrix interactions. The extracellular matrix that exists in the cellular microenvironment is crucial for guiding cell behaviours, such as determination of integrin ligation and interaction with growth factors. These interactions with the extracellular matrix regulate downstream mechanotransductive pathways, such as rearrangements in the cytoskeleton and activation of signal cascades. Protein adsorption onto nanotopography strongly influences the conformation and distribution density of extracellular matrix and, therefore, subsequent cell responses. In this review, we first discuss the interactive mechanisms of protein physical adsorption on nanotopography. Secondly, we summarise advances in creating nanotopographical features to instruct desired cell behaviours. Lastly, we focus on the cellular mechanotransductive pathways initiated by nanotopography. This review provides an overview of the current state-of-the-art designs of nanotopography aiming to provide better biomedical materials for the future.

●

A comprehensive overview of nanotopography fabrication, and nanotopography regulates various cell behaviours.

●

The interactive physical adsorption between nanotopography and extracellular matrix.

●

Nanotopography initiates the cellular mechanotransductive pathways and downstream signalling cascades.

Biomimetic Scaffolds with a Mineral Gradient and Funnel-Shaped Channels for Spatially Controllable Osteogenesis

A facile method is described herein for generating a mineral gradient in a biodegradable polymer scaffold. The gradient is achieved by swelling a composite film made of polycaprolactone (PCL) and hydroxyapatite (HAp) nanoparticles with a PCL solution. During the swelling process, the solvent and PCL polymer chains diffuse into the composite film, generating a gradient in HAp density at their interface. The thickness of the mineral gradient can be tuned by varying the extent of swelling to match the length scale of the natural tendon-to-bone attachment (20-60 µm). When patterned with an array of funnel-shaped channels, the mineral gradient presents stem cells with spatial gradations in both biochemical cues (e.g., osteoinductivity and conductivity associated with the HAp nanoparticles) and mechanical cues (e.g., substrate stiffness) to stimulate their differentiation into a graded distribution of cell phenotypes. This new class of biomimetic scaffolds holds great promise for facilitating the regeneration of the injured tendon-to-bone attachment by stimulating the formation of a functionally graded interface.

Potassium Titanate Assembled Titanium Dioxide Nanotube Arrays Endow Titanium Implants Excellent Osseointegration Performance and Nerve Formation Potential

Titanium based materials have been widely applied in bone-tissue engineering. However, inefficient bone repair remains to be solved due to the lack of neural network reconstruction at the bone-implant interface. Herein, we propose a functional surface modification approach to promote neurogenesis. Using an electrochemical technique and a hydrothermal approach, a potassium titanate nanorod-decorated titanium oxide (K₂Ti₆O₁₃-TiO₂) nanotube array is constructed on the surface of titanium implants. The K₂Ti₆O₁₃-TiO₂ hybrid nanotube array on titanium implants can enhance the osteogenic differentiation of mesenchymal stem cells due to the special nanostructures of titanium oxide nanorods. Meanwhile, the release of potassium ions is able to accelerate the neural differentiation of neural stem cells. This study provides a new approach to promote neuralization on the surface of implants, which is promising for future applications in constructing a fully functional interface in bone repair.

Regulation of stem cell fate using nanostructure-mediated physical signals

One of the major issues in tissue engineering is regulation of stem cell differentiation toward specific lineages. Unlike biological and chemical signals, physical signals with adjustable properties can be applied to stem cells in a timely and localized manner, thus making them a hot topic for research in the fields of biomaterials, tissue engineering, and cell biology. According to the signals sensed by cells, physical signals used for regulating stem cell fate can be classified into six categories: mechanical, light, thermal, electrical, acoustic, and magnetic. In most cases, external macroscopic physical fields cannot be used to modulate stem cell fate, as only the localized physical signals accepted by the surface receptors can regulate stem cell differentiation via nanoscale fibrin polysaccharide fibers. However, surface receptors related to certain kinds of physical signals are still unknown. Recently, significant progress has been made in the development of functional materials for energy conversion. Consequently, localized physical fields can be produced by absorbing energy from an external physical field and subsequently releasing another type of localized energy through functional nanostructures. Based on the above concepts, we propose a methodology that can be utilized for stem cell engineering and for the regulation of stem cell fate via nanostructure-mediated physical signals. In this review, the combined effect of various approaches and mechanisms of physical signals provides a perspective on stem cell fate promotion by nanostructure-mediated physical signals. We expect that this review will aid the development of remote-controlled and wireless platforms to physically guide stem cell differentiation both in vitro and in vivo, using optimized stimulation parameters and mechanistic investigations while driving the progress of research in the fields of materials science, cell biology, and clinical research.

Electroactive Biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: Design and Applications

During natural tissue regeneration, tissue microenvironment and stem cell niche including cell-cell interaction, soluble factors, and extracellular matrix (ECM) provide a train of biochemical and biophysical cues for modulation of cell behaviors and tissue functions. Design of functional biomaterials to mimic the tissue/cell microenvironment have great potentials for tissue regeneration applications. Recently, electroactive biomaterials have drawn increasing attentions not only as scaffolds for cell adhesion and structural support, but also as modulators to regulate cell/tissue behaviors and function, especially for electrically excitable cells and tissues. More importantly, electrostimulation can further modulate a myriad of biological processes, from cell cycle, migration, proliferation and differentiation to neural conduction, muscle contraction, embryogenesis, and tissue regeneration. In this review, endogenous bioelectricity and piezoelectricity are introduced. Then, design rationale of electroactive biomaterials is discussed for imitating dynamic cell microenvironment, as well as their mediated electrostimulation and the applying pathways. Recent advances in electroactive biomaterials are systematically overviewed for modulation of stem cell fate and tissue regeneration, mainly including nerve regeneration, bone tissue engineering, and cardiac tissue engineering. Finally, the significance for simulating the native tissue microenvironment is emphasized and the open challenges and future perspectives of electroactive biomaterials are concluded.

The Calcium Phosphate Modified Titanium Implant Combined With Platelet-Rich Plasma Treatment Promotes Implant Stabilization in an Osteoporotic Model

ABSTRACT

Osteoporosis as a kind of systemic bone metabolic disease has become one of the most prevalent diseases among the middle- and old-age, characterized with low bone mass and disruptive osseous microenvironment. The poor bone condition both in quantity and quality makes it daunting for osteoporotic patients who are submitted to dental implantation, joint replacement therapy, or orthopedic surgery. Since calcium phosphate (CaP) and platelet-rich plasma (PRP) treatment, all have improving the effect on bone regeneration. Inspired by this fact, the authors introduced a kind of novel implant with CaP modified surface by HPT (hydrothermal & pressure) treatment in this study. After producing, the authors tested its physicochemical properties through scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS) and contact-angle measurement. Then the authors desired to investigate the effect of this CaP-modified implant on bone regeneration and stabilization maintenance combined with PRP treatment by establishing an osteoporotic rat model. After 3 months of surgery, the authors collected all the specimens and evaluated new bone formation by micro-computed tomography (micro-CT) analysis, biomechanical test, and histologic assessment. All the results in vivo experiment showed the CaP modified implant combined with PRP treatment could improve the osteoinductive effect under osteoporotic condition, leading to better maintenance for stabilization between bone and implant interface, which might be rendered as a promising clinical method for osteoporotic patients when they receive orthopedic surgeries.

Nanocellulose-Reinforced Hydroxyapatite Nanobelt Membrane as a Stem Cell Multi-Lineage Differentiation Platform for Biomimetic Construction of Bioactive 3D Osteoid Tissue In Vitro

Severe bone defects, especially accompanied by vascular and peripheral nerve injuries, remain a massive challenge. Most studies related to bone tissue engineering have focused on osteogenic differentiation of mesenchymal stem cells (MSCs), and ignored the formation of blood vessels and nerves in the newly generated bone owing to the lack of proper materials and methodology for tuning stem cells differentiated into osteogenic, neuronal, and endothelial cells (ECs) in the same scaffold system. Herein, a nanocellulose-reinforced hybrid membrane with good mechanical properties and control over biodegradation by assembling ultralong hydroxyapatite nanobelts in a bacterial nanocellulose hydrogel is designed and synthesized. Osteogenic, neuronal cells are successfully differentiated on this hybrid membrane. Based on the multi-lineage differentiation property of the membrane, a bioactive 3D osteoid tissue (osteogenic, neural, and ECs) is mimetically constructed in vitro using layer-by-layer culture and integration. The bone regeneration ability of the as-prepared bioactive osteoid tissue is assessed in vivo via heterotopic osteogenesis experiments for eight weeks. The rapid new bone growth and formation of blood capillaries and nerve fibers prove that the hybrid membrane can be universally applied as a stem cell multi-lineage differentiation platform, which has significant applications in bone tissue engineering.

Topography: A Biophysical Approach to Direct the Fate of Mesenchymal Stem Cells in Tissue Engineering Applications

Tissue engineering is a promising strategy to treat tissue and organ loss or damage caused by injury or disease. During the past two decades, mesenchymal stem cells (MSCs) have attracted a tremendous amount of interest in tissue engineering due to their multipotency and self-renewal ability. MSCs are also the most multipotent stem cells in the human adult body. However, the application of MSCs in tissue engineering is relatively limited because it is difficult to guide their differentiation toward a specific cell lineage by using traditional biochemical factors. Besides biochemical factors, the differentiation of MSCs also influenced by biophysical cues. To this end, much effort has been devoted to directing the cell lineage decisions of MSCs through adjusting the biophysical properties of biomaterials. The surface topography of the biomaterial-based scaffold can modulate the proliferation and differentiation of MSCs. Presently, the development of micro- and nano-fabrication techniques has made it possible to control the surface topography of the scaffold precisely. In this review, we highlight and discuss how the main topographical features (i.e., roughness, patterns, and porosity) are an efficient approach to control the fate of MSCs and the application of topography in tissue engineering.

The Anatase Phase of Nanotopography Titania with Higher Roughness Has Better Biocompatibility in Osteoblast Cell Morphology and Proliferation

Previous studies have concluded that surface-modified titanium oxide (titania, TiO2) surface properties promote osteoblast cell morphology and proliferation. To screen a suitable structured titania coating with the best biocompatibility to be used in dental implants, five titania films (two amorphous, one rutile, and two anatases) with different surfaces were successfully synthesized on polished titanium by radio frequency (RF) magnetron sputtering. We applied atomic force microscopy (AFM) and X-ray diffraction (XRD) to depict the formulations. Furthermore, MC3T3-E1, the mouse osteoblast precursor cell, was used to assess cell proliferation and observe morphologic changes at the film surface. The data indicated that the overall number of MC3T3-E1 cells on anatase films was significantly higher as compared with cells on rutile and amorphous films. Meanwhile, the actin filaments of the cells grown on the anatase phase films were well defined and fully spread. In addition, the film with higher roughness had enhanced biocompatibility than that with lower roughness. The results showed that the crystal phase and titania coated roughness had a greater influence on the biocompatibility of nanostructured titania film. The higher the roughness of the anatase phase was, the better bioactivity for the morphology and proliferation of osteoblast. This is a good surface-modified biological material and may have a good application prospect in dental implants.

Graphdiyne-modified TiO2 nanofibers with osteoinductive and enhanced photocatalytic antibacterial activities to prevent implant infection

Titanium implants have been widely used in bone tissue engineering for decades. However, orthopedic implant-associated infections increase the risk of implant failure and even lead to amputation in severe cases. Although TiO2 has photocatalytic activity to produce reactive oxygen species (ROS), the recombination of generated electrons and holes limits its antibacterial ability. Here, we describe a graphdiyne (GDY) composite TiO2 nanofiber that combats implant infections through enhanced photocatalysis and prolonged antibacterial ability. In addition, GDY-modified TiO2 nanofibers exert superior biocompatibility and osteoinductive abilities for cell adhesion and differentiation, thus contributing to the bone tissue regeneration process in drug-resistant bacteria-induced implant infection.

Synergistic Effect of Cell-Derived Extracellular Matrices and Topography on Osteogenesis of Mesenchymal Stem Cells

Cell-derived matrices (CDMs) are an interesting alternative to conventional sources of extracellular matrices (ECMs) as CDMs mimic the natural ECM composition better and are therefore attractive as a scaffolding material for regulating the functions of stem cells. Previous research on stem cell differentiation has demonstrated that both surface topography and CDMs have a significant influence. However, not much focus has been devoted to elucidating possible synergistic effects of CDMs and topography on osteogenic differentiation of human bone marrow-derived mesenchymal stem cells (hBM-MSCs). In this study, polydimethylsiloxane (PDMS)-based anisotropic topographies (wrinkles) with various topography dimensions were prepared and subsequently combined with native ECMs produced by human fibroblasts that remained on the surface topography after decellularization. The synergistic effect of CDMs combined with topography on osteogenic differentiation of hBM-MSCs was investigated. The results showed that substrates with specific topography dimensions, coated with aligned CDMs, dramatically enhanced the capacity of osteogenesis as investigated using immunofluorescence staining for identifying osteopontin (OPN) and mineralization. Furthermore, the hBM-MSCs on the substrates decorated with CDMs exhibited a higher percentage of (Yes-associated protein) YAP inside the nucleus, stronger cell contractility, and greater formation of focal adhesions, illustrating that enhanced osteogenesis is partly mediated by cellular tension and mechanotransduction following the YAP pathway. Taken together, our findings highlight the importance of ECMs mediating the osteogenic differentiation of stem cells, and the combination of CDMs and topography will be a powerful approach for material-driven osteogenesis.

Micro-/Nanotopography on Bioresorbable Zinc Dictates Cytocompatibility, Bone Cell Differentiation, and Macrophage Polarization

Bioresorbable metals are quickly advancing in the field of regenerative medicine for their promises of tissue restoration without adverse consequences from their lifelong presence. Zn has recently risen to the top of bioresorbable metals with great potential as a medical implant. However, cell adhesion and colonization on the Zn substrate surface remains challenging, which could damper interfacial tissue-implant integration. Inspired by the fact that surface topography can regulate cell function and fate, we hypothesize that topography on bioresorbable Zn can dictate material biocompatibility, cell differentiation, and immunomodulation. To verify this, surface-engineered Zn plates with nano-, submicro-, and microtopographies were systematically investigated. The microscale topography exhibited increased adhesion, pronounced self-renewal, and enhanced osteogenic differentiation of bone cells as well as less macrophage inflammatory polarization, reduced platelet adhesion, and better hemocompatibility. Thus, surface topography could be a viable strategy to enhance bioresorbable Zn's biocompatibility and integration with surrounding tissues while reducing inflammation.

Application of Nanomaterials in Regulating the Fate of Adipose-derived Stem Cells

Adipose-derived stem cells are adult stem cells which are easy to obtain and multi-potent. Stem-cell therapy has become a promising new treatment for many diseases, and plays an increasingly important role in the field of tissue repair, regeneration and reconstruction. The physicochemical properties of the extracellular microenvironment contribute to the regulation of the fate of stem cells. Nanomaterials have stable particle size, large specific surface area and good biocompatibility, which has led them being recognized as having broad application prospects in the field of biomedicine. In this paper, we review recent developments of nanomaterials in adipose-derived stem cell research. Taken together, the current literature indicates that nanomaterials can regulate the proliferation and differentiation of adipose-derived stem cells. However, the properties and regulatory effects of nanomaterials can vary widely depending on their composition. This review aims to provide a comprehensive guide for future stem-cell research on the use of nanomaterials.

High-Aspect-Ratio Nanostructured Surfaces as Biological Metamaterials

Materials patterned with high-aspect-ratio nanostructures have features on similar length scales to cellular components. These surfaces are an extreme topography on the cellular level and have become useful tools for perturbing and sensing the cellular environment. Motivation comes from the ability of high-aspect-ratio nanostructures to deliver cargoes into cells and tissues, access the intracellular environment, and control cell behavior. These structures directly perturb cells' ability to sense and respond to external forces, influencing cell fate, and enabling new mechanistic studies. Through careful design of their nanoscale structure, these systems act as biological metamaterials, eliciting unusual biological responses. While predominantly used to interface eukaryotic cells, there is growing interest in nonanimal and prokaryotic cell interfacing. Both experimental and theoretical studies have attempted to develop a mechanistic understanding for the observed behaviors, predominantly focusing on the cell-nanostructure interface. This review considers how high-aspect-ratio nanostructured surfaces are used to both stimulate and sense biological systems.

Topography induced stiffness alteration of stem cells influences osteogenic differentiation

Topography-driven alterations to single cell stiffness rather than alterations in cell morphology, is the underlying driver for influencing cell biological processes, particularly stem cell differentiation.

An Effective Osteogenesis Porous CaP/Collagen Interface Compatible with Various Substrates Fabricated by Controlled Mineralization in a Delicately Adjustable Organic Matrix

Increasing bone formation on the surfaces of implants such as screws, plates, or shims holds great significance for clinical medicine. However, osteogenesis implant coatings that mimic natural bone in terms of both their components and structural features are still lacking. Here we report the biomimetic interface of calcium phosphate (CaP) in a collagen matrix fabricated by controlled mineralization that presents biomimetic porous features. The porous CaP/collagen interface, with a thickness of about 1 μm, significantly enhances osteogenesis, as verified at both the gene and protein levels as well as by in vivo experiments. Taking advantage of the generality of the method, the biomimetic interface was prepared on a variety of substrates, including conductive substrates, 3D metal meshes, plastic or elastic substrates, and even on filter papers. The adjustability and generality of the method have enabled new characterization tests to be developed during experiments on cells and thus should greatly facilitate clinical medicine and tissue engineering.

Fabrication of Curcumin-Modified TiO2 Nanoarrays via Cyclodextrin Based Polymer Functional Coatings for Osteosarcoma Therapy

The incomplete removal of bone tumors leads to increased local recurrence and poor prognosis. To prevent ostoperative tumor recurrence and simultaneously repair surgery-caused bone defects, there is a need of great significance to develop implantable biomaterials possessing both cancer cell-killing ability and excellent bioactivity. In this work, a functionalized titanium-based implant is successfully fabricated by loading curcumin (CUR) onto cyclodextrin based polymer (pCD) modified titanium dioxide (TiO₂ ) nanorod arrays. Herein, a polydopamine (pDA) assisted film is implemented as a first coating layer onto the surface of the TiO₂ nanoarrays to guarantee the robust anchorage of the pCD. The pCD coating acts as a reservoir for CUR, allowing for efficient drug loading and sustained release of anticancer drugs. Studies show that the CUR-modified surfaces (TiO₂ /pDA/pCD/CUR) can significantly promote apoptosis of osteosarcoma cells in vitro by inducing mitochondrial dysfunction caused by the ROS overproduction, and meanwhile, effectively inhibit the tumor growth in vivo. Moreover, such functionalized implants with surface density of loaded CUR at 22.48 µg cm^-2 or lower support the attachment and proliferation of osteoblasts in vitro. These results successfully demonstrate that as-prepared TiO₂ /pDA/pCD/CUR constructs have combined anticancer performance and good biocompatibility, which has great promise for the surgical therapy of bone tumors.

Photoelectric-Responsive Extracellular Matrix for Bone Engineering

Using noninvasive stimulation of cells to control cell fate and improve bone regeneration by optical stimulation can achieve the aim of precisely orchestrating biological activities. In this study, we create a fast and repeatable photoelectric-responsive microenvironment around an implant using a bismuth sulfide/hydroxyapatite (BS/HAp) film. The unexpected increase of photocurrent on the BS/HAp film under near-infrared (NIR) light is mainly due to the depletion of holes through PO₄^3- from HAp and interfacial charge transfer by HAp compared with BS. The electrons activate the Na⁺ channel of mesenchymal stem cells (MSCs) and change the cell adhesion in the intermediate environment. The behavior of MSCs is tuned by changing the photoelectronic microenvironment. RNA sequencing reveals that when photoelectrons transfer to the cell membrane, sodium ions flux and the membrane potential depolarizes to change the cell shape. Meanwhile, calcium ions fluxed and FDE1 was upregulated. Furthermore, the TCF/LEF in the cell nucleus began transcription to regulate the downstream genes involved in osteogenic differentiation, which is performed through the Wnt/Ca²⁺ signaling pathway. This research has created a biological therapeutic strategy, which can achieve in vitro remotely, precisely, and noninvasively controlling cell differentiation behaviors by tuning the in vivo photoelectric microenvironment using NIR light.

Controlled Release of Naringin in GelMA-Incorporated Rutile Nanorod Films to Regulate Osteogenic Differentiation of Mesenchymal Stem Cells

Naringin, a Chinese herbal medicine, has been demonstrated to concentration-dependently promote osteogenic differentiation of mesenchymal stem cells (MSCs). However, it remains a challenge to load naringin on coatings for osteogenesis and further control the release kinetics. Here, we demonstrated that the release behavior of naringin on rutile nanorod films could be controlled by either mixing naringin with gelatin methacryloyl (GelMA) before spinning onto the films or soaking the obtained GelMA-incorporated films with the naringin solution to achieve the distinct degradation-type release and diffusion-type release, respectively. We further revealed that the naringin-loaded coatings facilitated adhesion, proliferation and late differentiation, and mineralization of MSCs. Our findings provided a novel strategy to engineer the coatings with controlled release of naringin and emphasized the bioactivity of naringin for the osteogenic differentiation of MSCs.

Influence of Titanium Oxide Pillar Array Nanometric Structures and Ultraviolet Irradiation on the Properties of the Surface of Dental Implants-A Pilot Study

Aim: Titanium implants are commonly used as replacement therapy for lost teeth and much current research is focusing on the improvement of the chemical and physical properties of their surfaces in order to improve the osseointegration process. TiO₂, when it is deposited in the form of pillar array nanometric structures, has photocatalytic properties and wet surface control, which, together with UV irradiation, provide it with superhydrophilic surfaces, which may be of interest for improving cell adhesion on the peri-implant surface. In this article, we address the influence of this type of surface treatment on type IV and type V titanium discs on their surface energy and cell growth on them. Materials and methods: Samples from titanium rods used for making dental implants were used. There were two types of samples: grade IV and grade V. In turn, within each grade, two types of samples were differentiated: untreated and treated with sand blasting and subjected to double acid etching. Synthesis of the film consisting of titanium oxide pillar array structures was carried out using plasma-enhanced chemical vapor deposition equipment. The plasma was generated in a quartz vessel by an external SLAN-1 microwave source with a frequency of 2.45 GHz. Five specimens from each group were used (40 discs in total). On the surfaces to be studied, the following determinations were carried out: (a) X-ray photoelectron spectroscopy, (b) scanning electron microscopy, (c) energy dispersive X-ray spectroscopy, (d) profilometry, (e) contact angle measurement or surface wettability, (f) progression of contact angle on applying ultraviolet irradiation, and (g) a biocompatibility test and cytotoxicity with cell cultures. Results: The application of ultraviolet light decreased the hydrophobicity of all the surfaces studied, although it did so to a greater extent on the surfaces with the studied modification applied, this being more evident in samples manufactured in grade V titanium. In samples made in grade IV titanium, this difference was less evident, and even in the sample manufactured with grade IV and SLA treatment, the application of the nanometric modification of the surface made the surface optically less active. Regarding cell growth, all the surfaces studied, grouped in relation to the presence or not of the nanometric treatment, showed similar growth. Conclusions. Treatment of titanium oxide surfaces with ultraviolet irradiation made them change temporarily into superhydrophilic ones, which confirms that their biocompatibility could be improved in this way, or at least be maintained.

Micro- and Nanohemispherical 3D Imprints Modulate the Osteogenic Differentiation and Mineralization Tendency of Bone Cells

Surface topography has been reported to play a key role in modulating cell behaviors, yet the mechanism through which it modulates these behaviors is not fully understood, especially in the case of three-dimensional (3D) topographies. In this study, a series of novel hemispherical 3D imprints ranging from the nanoscale to the microscale were prepared on titanium (Ti) surfaces using a customized interfacial lithography method. Mouse embryo osteoblast precursor cells (MC3T3-E1) were selected to investigate the solitary effect of specific hemispherical 3D imprints on cellular behaviors. The results indicated that varied hemispherical 3D imprints can affect the formation of filopodia and the arrangement of the cytoskeleton in different ways. Specifically, they can alter the spreading morphologies of cells and lead to deformation of the nucleus, which eventually affects cell proliferation and osteogenic differentiation. Cells cultured on different hemispherical 3D imprints exhibited promoted proliferation and osteogenic differentiation to different degrees; for example, cells cultured on 90 and 500 nm hemispherical imprints formed abundant filopodia and exhibited the highest alkaline phosphatase activity and osteogenic gene expression, respectively. Four-week tibia implantation also confirmed that 90 nm hemispherical imprints improved the osteogenic ability in vivo compared with an unpatterned Ti substrate. In addition to promoted proliferation, colonization of more cells on the surface of implants and induction of rapid osteogenic differentiation can occur. Our work provides a rational way to balance cell proliferation and differentiation, which can accelerate bone integration of an implant and host tissue.

The effect of pulsed electromagnetic field exposure on osteoinduction of human mesenchymal stem cells cultured on nano-TiO2 surfaces

Human bone marrow-derived mesenchymal stem cells (hBM-MSCs) are considered a great promise in the repair and regeneration of bone. Considerable efforts have been oriented towards uncovering the best strategy to promote stem cells osteogenic differentiation. In previous studies, hBM-MSCs exposed to physical stimuli such as pulsed electromagnetic fields (PEMFs) or directly seeded on nanostructured titanium surfaces (TiO₂) were shown to improve their differentiation to osteoblasts in osteogenic condition. In the present study, the effect of a daily PEMF-exposure on osteogenic differentiation of hBM-MSCs seeded onto nanostructured TiO₂ (with clusters under 100 nm of dimension) was investigated. TiO₂-seeded cells were exposed to PEMF (magnetic field intensity: 2 mT; intensity of induced electric field: 5 mV; frequency: 75 Hz) and examined in terms of cell physiology modifications and osteogenic differentiation. Results showed that PEMF exposure affected TiO₂-seeded cells osteogenesis by interfering with selective calcium-related osteogenic pathways, and greatly enhanced hBM-MSCs osteogenic features such as the expression of early/late osteogenic genes and protein production (e.g., ALP, COL-I, osteocalcin and osteopontin) and ALP activity. Finally, PEMF-treated cells resulted to secrete into conditioned media higher amounts of BMP-2, DCN and COL-I than untreated cell cultures. These findings confirm once more the osteoinductive potential of PEMF, suggesting that its combination with TiO₂ nanostructured surface might be a great option in bone tissue engineering applications.

Polylactic Acid Nanopillar Array-Driven Osteogenic Differentiation of Human Adipose-Derived Stem Cells Determined by Pillar Diameter

Numerous studies have determined that physical cues, especially the nanotopography of materials, play key roles in directing stem cell differentiation. However, most research on nanoarrays for stem cell fate regulation is based on nonbiodegradable materials, such as silicon wafers, TiO₂, and poly(methyl methacrylate), which are rarely used as tissue engineering biomaterials. In this study, we prepared biodegradable polylactic acid (PLA) nanopillar arrays with different diameters but the same center-to-center distance using a series of anodic aluminum oxide nanowell arrays as templates. Human adipose-derived stem cells (hADSCs) were selected to investigate the effect of the diameter of PLA nanopillar arrays on stem cell differentiation. By culturing hADSCs without the assistance of any growth factors or osteogenic-induced media, the differentiation tendencies of hADSCs on the nanopillar arrays were assessed at the gene and protein levels. The assessment results suggested that the osteogenic differentiation of hADSCs can be driven by nanopillar arrays, especially by nanopillar arrays with a diameter of 200 nm. Moreover, an in vivo animal model of the samples demonstrated that PLA film with the 200 nm pillar array exhibits an improved ectopic osteogenic ability compared with the planar PLA film after 4 weeks of ectopic implantation. This study has provided a new variable to investigate in the interaction between stem cells and nanoarray structures, which will guide the bone regeneration clinical research field. This work paves the way for the utility of degradable biopolymer nanoarrays with specific geometrical and mechanical signals in biomedical applications, such as patches and strips for spine fusion, bone crack repair, and restoration of tooth enamel.

Nanotopographic Regulation of Human Mesenchymal Stem Cell Osteogenesis

Mesenchymal stem cell (MSC) differentiation can be manipulated by nanotopographic interface providing a unique strategy to engineering stem cell therapy and circumventing complex cellular reprogramming. However, our understanding of the nanotopographic-mechanosensitive properties of MSCs and the underlying biophysical linkage of the nanotopography-engineered stem cell to directed commitment remains elusive. Here, we show that osteogenic differentiation of human MSCs (hMSCs) can be largely promoted using our nanoengineered topographic glass substrates in the absence of dexamethasone, a key exogenous factor for osteogenesis induction. We demonstrate that hMSCs sense and respond to surface nanotopography, through modulation of adhesion, cytoskeleton tension, and nuclear activation of TAZ (transcriptional coactivator with PDZ-binding motif), a transcriptional modulator of hMSCs. Our findings demonstrate the potential of nanotopographic surfaces as noninvasive tools to advance cell-based therapies for bone engineering and highlight the origin of biophysical response of hMSC to nanotopography.

New Interface for Purification of Proteins: One-Dimensional TiO2 Nanotubes Decorated by Fe3O4 Nanoparticles

In this work, a high surface area interface, based on anodic one-dimensional (1D) TiO₂ nanotubes homogeneously decorated by Fe₃O₄ nanoparticles (TiO₂NTs@Fe₃O₄NPs) is reported for the first time for an unprecedented purification of His-tagged recombinant proteins. Excellent purification results were achieved from the model protein mixture, as well as from the whole cell lysate (with His-tagged ubiquitin). Compared to a conventional immobilized-metal affinity chromatography (IMAC) system, specific isolation of selected His-tagged proteins on behalf of other proteins was significantly enhanced on TiO₂NTs@Fe₃O₄NPs interface under optimized binding and elution conditions. The combination of specific isolation properties, magnetic features, biocompatibility, and ease of preparation of this material consisting of two basic metal oxides makes it a suitable candidate for future purification of recombinant proteins in biotechnology. The principally new material bears a large potential to open new pathways for discoveries in nanobiotechnology and nanomedicine.

Current approaches for modulation of the nanoscale interface in the regulation of cell behavior

Regulation of cell behavior in response to nanoscale features has been the focus of much research in recent years and the successful generation of nanoscale features capable of mimicking the natural nanoscale interface has been of great interest in the field of biomaterials research. In this review, we discuss relevant nanofabrication techniques and how they are combined with bioengineering applications to mimic the natural extracellular matrix (ECM) and create valuable nanoscale interfaces.

TiO2 nanorod arrays as a photocatalytic coating enhanced antifungal and antibacterial efficiency of Ti substrates

Aim: To investigate the photocatalytic inactivation of fungi and bacteria mediated by TiO2 nanorod arrays (TNRs). Materials & methods: The features of TNRs were characterized by scanning electron microscopy, atomic force microscopy, transmission electron microscopy, x-ray diffraction (XRD) and contact angle measurement. The antimicrobial efficiency was detected on biofilm and planktonic forms of Candida albicans, Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis by crystal violet and XTT (2,3-bis [2-methoxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-caboxanilide) assay, confocal laser scanning microscope and colony-forming assay. Fluorogenic quantitative assay was used to explore the underlying mechanism. Results & conclusion: TNRs were well aligned and vertically oriented on Ti with a diameter of about 100 μm, possessing a rougher surface and better hydrophilicity. Moreover, TNRs exhibited significantly higher antifungal and antibacterial efficiency compared with Ti under UV irradiation, laying the foundation for surface modification of implants with TNRs.

TiO2 nanorod arrays modified Ti substrates promote the adhesion, proliferation and osteogenic differentiation of human periodontal ligament stem cells

Nanostructure coating on titanium (Ti) implants is well known as a cue for directing osteoblast behavior and function. However, effects of nanostructure coatings on dental stem cells have been rarely explored. In this work, assembled TiO₂ nanorod arrays (TNRs) were fabricated on the polished Ti substrates using hydrothermal and sintering methods. The adhesion, morphology, proliferation and osteogenic differentiation of human periodontal ligament stem cells (PDLSCs) seeded onto TNRs substrates were evaluated. Ti substrates were used as control. Rougher TNRs showed better hydrophilicity and protein adsorption capacity compared with Ti control. When seeded on TNRs substrates, PDLSCs exhibited more stretched morphology and higher proliferation rate. Cytoskeletal F-actin expression was markedly promoted for PDLSCs cultured on TNRs substrates under osteogenic induction. Alkaline phosphatase (ALP) activity and mineral deposition were also enhanced by TNRs. Moreover, osteogenesis-related markers of ALP, runt related transcription factor 2 (Runx2) and osteopontin (OPN) of PDLSCs cultured on TNRs substrates were significantly up-regulated at both gene and protein levels when compared to Ti substrates. In conclusion, the unique structure of TNRs provided a biocompatible platform for modulating morphology and function of PDLSCs. The promotion of osteogenic differentiation indicated that the surface modification of implants with TNRs may improve the osteogenic activity of implants and the bone-implant integration in future clinical applications.

Improved rhBMP-2 function on MBG incorporated TiO2 nanorod films

In the process of biomaterials mediated bone regeneration, rhBMP-2 delivery at efficient dose in sustained kinetics is crucial for promoting cell osteogenic differentiation. Meanwhile, surface morphology of the biomaterials could regulate cellular responses as well as strengthen the rhBMP-2 interaction with cells for better bone induction. Herein, TiO₂ nanorod films with varied mesoporous bioactive glass (MBG) incorporation amount were designed to strengthen the efficacy of rhBMP-2, basing on optimized loading/release behaviors and surface nanostructure cooperatively. The MBG incorporation improved rhBMP-2 loading amount and regulated its release behavior. Consequently, the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) on the incorporated films was extremely enhanced, and the incorporated nanorod film with 200nm MBG thickness exhibited the best osteoinduction effect. However, MBG film and the incorporated nanorod film had the same loading amount of rhBMP-2, the latter showed a much higher expression of 7-day osteogenic differentiation index than the former, which could be attributed to the synergistic effect of optimized rhBMP-2 release behavior and surface morphology. The MBG incorporated TiO₂ nanorod films here presents a promising strategy for enhancing osteoinduction through optimized rhBMP-2 release behavior.

Construction of a bioactive surface with micro/nano-topography on titanium alloy by micro-milling and alkali-hydrothermal treatment

The surface topography and wettability are important factors that determine the biocompatibility of biomaterials. In this article, the hierarchical micro/nano-topography of titanium alloy surface was fabricated by micro-milling and alkali-hydrothermal reaction. The surface topography and chemical composition of treated surfaces were characterized using laser scanning microscope and scanning electron microscope. The contact angles of surfaces with different micro/nano-topographies were measured by contact angle tester. MC3T3s morphology and osteocalcin productions were characterized to investigate the influence of surface modification on implants’ biocompatibility. The results show that hydrophilicity of micro-structured surface decreased compared to the untextured surface and contact angle values decreased with the increase in micro-groove spacing in small increments. In addition, the surfaces treated with alkali-hydrothermal reaction displayed strong hydrophilicity and the surface energy increased by 40 nJ/cm2 approximately. In vitro tests indicated that micro/nano-structured surface improved the adhesion, spreading, and differentiation of MC3T3s.