Clustering-Triggered Emission of Nonconjugated Polyacrylonitrile

Aliphatic hyperbranched polyphosphate: a novel multicolor RTP material with AIE character

Long-lived photoluminescent probes are emerging as significant luminogens for biological imaging. However, currently, most long-lived luminescent materials contain expensive rare elements or cytotoxic bulky aromatic or conjugated units. Herein, a novel hyperbranched polyphosphate (HBPPE) was synthesized using triethyl phosphate (TEP) and ethylene glycol (EG) through a transesterification polycondensation reaction. The obtained HBPPE P1 can emit bright blue photoluminescence under UV light and show significant AIE character. Interestingly, the average photoluminescence lifetime of P1 is 12.82 μs. This suggests the first phosphorescent material without rare elements or aromatic structures attributed to the covalent-crystal-like structure. Besides, P1 shows an obvious red-shift along with the excitation wavelength, which emits blue, cyan, green, yellow and red photoluminescence, covering nearly all the visible light region. This study not only enriches the species of nonconventional multicolor AIE luminogens but also provides a concise method for the synthesis of HBPPE and demonstrates the possibility for phosphorescent materials without rare elements or bulky aromatic units.

Recent Progress in Nonconventional Luminescent Macromolecules and their Applications

Traditional π-conjugated luminescent macromolecules typically suffer from aggregation-caused quenching (ACQ) and high cytotoxicity, and they require complex synthetic processes. In contrast, nonconventional luminescent macromolecules (NCLMs) with nonconjugated structures possess excellent biocompatibility, ease of preparation, unique luminescence behavior, and emerging applications in optoelectronics, biology, and medicine. NCLMs are currently believed to produce inherent luminescence due to through-space conjugation of overlapping electron orbitals in solid/aggregate states. However, as experimental facts continue to exceed expectations or even overturn some previous assumptions, there is still controversy about the detailed luminous mechanism of NCLMs, and extensive studies are needed to further explore the mechanism. This Perspective highlights recent progress in NCLMs and classifies and summarizes these advances from the viewpoint of molecular design, mechanism exploration, applications, and challenges and prospects. The aim is to provide guidance and inspiration for the huge fundamental and practical potential of NCLMs.

Exploring the Mechanisms behind Non-aromatic Fluorescence with the Density Functional Tight Binding Method

Recent experimental findings reveal nonconventional fluorescence emission in biological systems devoid of conjugated bonds or aromatic compounds, termed non-aromatic fluorescence (NAF). This phenomenon is exclusive to aggregated or solid states and remains absent in monomeric solutions. Previous studies focused on small model systems in vacuum show that the carbonyl stretching mode along with strong interaction of short hydrogen bonds (SHBs) remains the primary vibrational mode explaining NAF in these systems. In order to simulate larger model systems taking into account the effects of the surrounding environment, in this work we propose using the density functional tight-binding (DFTB) method in combination with non-adiabatic molecular dynamics (NAMD) and the mixed quantum/molecular mechanics (QM/MM) approach. We investigate the mechanism behind NAF in the crystal structure of l-pyroglutamine-ammonium, comparing it with the related nonfluorescent amino acid l-glutamine. Our results extend our previous findings to more realistic systems, demonstrating the efficiency and robustness of the proposed DFTB method in the context of NAMD in biological systems. Furthermore, due to its inherent low computational cost, this method allows for a better sampling of the nonradiative events at the conical intersection which is crucial for a complete understanding of this phenomenon. Beyond contributing to the ongoing exploration of NAF, this work paves the way for future application of this method in more complex biological systems such as amyloid aggregates, biomaterials, and non-aromatic proteins.

Ultrafast Self-Healing, Superstretchable, and Ultra-Strong Polymer Cluster-Based Adhesive Based on Aromatic Acid Cross-Linkers for Excellent Hydrogel Strain Sensors

Synthetic hydrogel strain sensors rarely exhibit a comprehensive combination of mechanical properties such as ultra-stretchability, ultrafast self-healing, and high sensitivity. Herein, seven small molecule enhanced mechanical behaviors of polymer-cluster based hydrogels are demonstrated. The oxidized polyethyleneimine/polymeric acrylic acid (ohPEI/PAA) hydrogels with aromatic formic acids as supramolecular cross-linkers are prepared by simultaneous formation of ohPEI polymer clusters and PAA upon the addition of ammonium persulfate. The optimized hydrogel adhesive exhibits comprehensive excellent properties, such as high extensibility (up to 12 298%), real-time mechanical self-healing capability (<1 s, 93% efficiency), high uniformity, underwater adhesivity, and water-sealing ability. The proper binding strength of hydrogel and skin (47 kPa) allows the hydrogel to be utilized as highly sensitive (gauge factor:16.08), highly conductive (2.58 mS cm-1), and underwater strain sensors. Specially, the adhesive strength of the adhesive to wood after dehydration is extremely high, reaching up to 29.59 MPa. Additionally, when glycerol is introduced, the obtained gel maintains the physical properties even at harsh-temperature conditions (-40 to 80 °C). It presents that multiple and hierarchical non-covalent interactions including multiple hydrogen bonding interactions, π-π stacking, electrostatic interactions, and dipole-dipole interactions of polymer clusters, allow for the energy dissipation and contribute to the excellent performance of the hydrogel.

Mechanically Ultra-Robust Fluorescent Elastomer for Elaborating Auxetic Composite

Fluorescent elastomers are predominantly fabricated through doping fluorescent components or conjugating chromophores into polymer networks, which often involves detrimental effects on mechanical performance and also makes large-scale production difficult. Inspired by the heteroatom-rich microphase separation structures assisted by intensive hydrogen bonds in natural organisms, an ultra-robust fluorescent polyurethane elastomer is reported, which features a remarkable fracture strength of 87.2 MPa with an elongation of 1797%, exceptional toughness of 678.4 MJ m-3 and intrinsic cyan fluorescence at 445 nm. Moreover, the reversible fluorescence variation with temperature could in situ reveal the microphase separation of the elastomer in real time. By taking advantage of mechanical properties, intrinsic fluorescence and hydrogen bonds-promoted interfacial bonding ability, this fluorescent elastomer can be utilized as an auxetic skeleton for the elaboration of an integrated auxetic composite. Compared with the auxetic skeleton alone, the integrated composite shows an improved mechanical performance while maintaining auxetic deformation in a large strain below 185%, and its auxetic process can be visually detected under ultraviolet light by the fluorescence of the auxetic skeleton. The concept of introducing hydrogen-bonded heteroatom-rich microphase separation structures into polymer networks in this work provides a promising approach to developing fluorescent elastomers with exceptional mechanical properties.

Multiple hydrogen-bonding induced nonconventional red fluorescence emission in hydrogels

The development of unconventional long-wavelength fluorescent polymer hydrogels without using polycyclic aromatic hydrocarbons or extended π-conjugation is a fundamental challenge in luminescent materials owing to a lack of understanding regarding the spatial interactions induced inherent clustering-triggered emission under water-rich conditions. Inspired by the color change of protein astaxanthin as a result of heat-induced denaturation, we propose a thermodynamically driven strategy to develop red fluorescence (~610 nm) by boiling multiple hydrogen-bonded poly(N-acryloylsemicarbazide) hydrogels in a water bath. We reveal that thermodynamically driven conformational changes of polymer chains from isolated hydrogen bonding donor-acceptor structures to through-space interaction structures induce intrinsic fluorescence shifts from blue to red during clustering-triggered emission. The proposed multiple hydrogen-bonding supramolecular hydrogel shows good fluorescence stability, mechanical robustness, and 3D printability for customizable shaping. We provide a viable method to prepare nonconventional long-wavelength fluorescent hydrogels towards soft fluorescent devices without initially introducing any fluorescent components.

Regulation of Photophysical Behaviors in Hyperbranched Aggregation-Induced Emission Polymers for Reactive Oxygen Species Scavenging

Developing nonconjugated materials with large Stokes shifts is highly desired. In this work, three kinds of hyperbranched aggregation-induced emission (AIE) polymers with tunable n/π electronic effects were synthesized. HBPSi-CBD contains alkenyl groups in the backbone and possesses a promoted n-π* transition and red-shifted emission wavelength with a large Stokes shift of 186 nm. Experiments and theoretical simulations confirmed that the planar π electrons in the backbone are responsible for the red-shifted emission due to the strong through-space n···π interactions and restricted backbone motions. Additionally, the designed HBPSi-CBD could be utilized as an ROS scavenger after coupling with l-methionine. The HBPSi-Met exhibits remarkable ROS scavenging properties with a scavenging capacity of 77%. This work not only gains further insight into the structure-property relationship of nonconjugated hyperbranched AIE polymers but also provides a promising ROS-scavenging biomaterial for the treatment of ROS-related diseases.

Versatile Polymerization-Induced Emission Polymers from Barbier Polymerization of Cinnamic Esters with Tunable Emission

Cinnamic ester is a common and abundant chemical substance, which can be extracted from natural plants. Compared with traditional esters, cinnamic ester contains α,β-unsaturated carbonyl structure with multiple reactive sites, resulting in more abundant reactivities and chemical structures. Here, a versatile polymerization-induced emission (PIE) is successfully demonstrated through Barbier polymerization of cinnamic ester. Attributed to its abundant reactivities of α,β-unsaturated carbonyl structure, Barbier polymerization of cinnamic esters with different organodihalides gives polyalcohol and polyketone via 1,2-addition and 1,4-addition, respectively, which is also confirmed by small molecular model reactions. Meanwhile, these organodihalides dependant polyalcohol and polyketone exhibit different non-traditional intrinsic luminescence (NTIL) from aggregation-induced emission (AIE) type to aggregation-caused quenching (ACQ) type, where novel PIE luminogens (PIEgens) are revealed. Further potential applications in explosive detection are carried out, where it achieves TNT detection sensitivity at ppm level in solution and ng level on the test paper. This work therefore expands the structure and functionality libraries of monomer, polymer and NTIL, which might cause inspirations to different fields including polymer chemistry, NTIL, AIE and PIE.

Red-Shifted Luminescence of Acrylonitrile-Containing Copolymers: A Matter of One Methyl Unit

Copolymerization provides an effective approach to tune the photophysical properties of non-conventional luminescent polymers (NCLPs). In this study, the controlling of intrinsic emissions of polyacrylonitrile (PAN) copolymers is revealed by a delicate difference of secondary monomers. The introduction of methacrylate comonomers can induce a 70-nm red-shifting in the PL emission of copolymers compared with that of acrylate-containing copolymers. The mechanism of such "copolymerization induced red-shifting" in PAN copolymers is investigated. It is demonstrated that the presence of the α-methyl group in the copolymers can enhance the chain rigidity and through-space conjugation (TSC) of C≡N groups, resulting in the red-shifting of emission.

Clickable Polymerization-Induced Emission Luminogens Toward Color-Tunable Modification of Non-Traditional Intrinsic Luminescent Polymers

Non-traditional intrinsic luminescent (NTIL) polymer is an emerging field, and its color-tunable modification is highly desirable but still rarely investigated. Here, a click chemistry approach for the color-tunable modifications of NTIL polymers by introducing clickable polymerization-induced emission luminogen (PIEgen), is demonstrated. Through Cu-catalyzed azide-alkyne cycloaddition click chemistry, a series of PIEgens is successful prepared, which is further polymerized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Interestingly, after clickable modification, these monomers are nonemissive in both solution and aggregation states; while, the corresponding polymers exhibit intriguing aggregation-induced emission (AIE) characteristics, confirming their PIEgen characteristics. By varying alkynyl substitutions, color-tunable NTIL polymers are achieved with emission wavelength varying from 448 to 498 nm, revealing a series of PIEgens and verifying the importance of modification of NTIL polymers. Further luminescence energy transfer application is carried out as well. This work therefore designs a series of clickable PIEgens and opens a new avenue for the modification of NTIL polymers via click chemistry, which may cause inspirations to the research fields including luminescent polymer, NTIL, click chemistry, AIE and modification.

Barbier Polymerization-Induced Emission towards Fully Substituted Polyethylene Analogues with Non-Traditional Intrinsic Luminescence

The properties of polyethylene are highly dependent on the variety and quantity of substitutions. Generally, polyethylene can only be fully substituted with fluorine atoms, mainly e. g., polytetrafluoroethylene and nafion, because atomic radius of fluorine atom is small enough. The preparation of fully substituted polyethylene analogues (FSPEA) and their non-traditional intrinsic luminescence (NTIL) are attractive, especially for substitutions with relatively larger atomic radii than a fluorine atom. Here, Barbier polymerization-induced emission (PIE) is demonstrated as a universal method for the molecular design of NTIL type FSPEAs with intriguing aggregation-induced emission (AIE) behaviors. Through Barbier polymerization of diphenyldichloromethane and different peroxyesters in the presence of Mg in one pot, a series of FSPEAs, including polytriphenylethanol (PTPE), polydiphenylfurylethanol (PDPFE), polydiphenylthiophenylethanol (PDPTE) and polydiphenylnaphthylethanol (PDPNE) have been successfully prepared. Further potential applications for explosive detection, artificial light-harvesting system and white phosphor-converted light-emitting diode are investigated. Therefore, this work opens up a new approach for the molecular design of FSPEA with non-conjugated luminescence, which may cause inspirations to different research fields like polyolefin and luminescent materials.

Enabling nonconjugated polyesters emit full-spectrum fluorescence from blue to near-infrared

Near-infrared luminophores have many advantages in advanced applications, especially for structures without π-conjugation aromatic rings. However, the fabrication of red clusteroluminogens from nonconjugated polymers is still a big challenge, let alone the near-infrared clusteroluminogens. Here, we develop nonconjugated luminophores with full-spectrum from blue to near-infrared light (470 ~ 780 nm), based on color phenomenon of nonconjugated polyesters synthesized from the amine-initiated copolymerization of epoxides and cyclic anhydrides. We reveal that amines act as initiators attached to polymer chain ends. The formation of various amine-ester complexes in polyesters induces red to near-infrared light, conceptually, amine-ester complexed clusteroluminescence via intra/inter-chain charge transfer. Significantly, emission colors can be easily tuned by the contents and types of amines, microstructures of polyesters, and their concentration. This work provides a low-cost, scalable platform and strategy for the production of high-efficiency, multicolor luminescent materials.

Luminescent polypeptides

Polypeptides, as biomacromolecules, hold immense potential in various biological applications such as tissue engineering, immunomodulating agents, and target binding. Among these applications, the attention towards luminescent polypeptides has grown significantly, due to their ability to visualize biological processes effectively. In this perspective, we have compiled information on three distinct types of luminescent polypeptides: natural fluorescent proteins, luminophores-bioconjugated polypeptides, and synthesized polypeptides with clusteroluminescence. Last, we shed light on the significance and prospects of clusteroluminescent polypeptides, which are expected to emerge as crucial new-generation bioluminophores, offering high emission efficiency and tunable emission wavelengths.

Hyperbranched Polyborosiloxanes: Non-traditional Luminescent Polymers with Red Delayed Fluorescence

Non-traditional fluorescent polymers have attracted significant attention for their excellent biocompatibility and diverse applications. However, designing and preparing non-traditional fluorescent polymers that simultaneously possess long emission wavelengths and long fluorescence lifetime remains challenging. In this study, a series of novel hyperbranched polyborosiloxanes (P1-P4) were synthesized. As the electron density increases on the monomer diol, the optimal emission wavelengths of the P1-P4 polymers gradually red-shift to 510, 570, 575, and 640 nm, respectively. In particular, P4 not only exhibits red emission but also demonstrates delayed fluorescence with a lifetime of 9.73 μs and the lowest critical cluster concentration (1.76 mg/mL). The experimental results and theoretical calculations revealed that the synergistic effect of dual heteroatom-induced electron delocalization and through-space O⋅⋅⋅O and O⋅⋅⋅N interaction was the key factor contributing to the red-light emission with delayed fluorescence. Additionally, these polymers showed excellent potential in dual-information encryption. This study provides a universal design strategy for the development of unconventional fluorescent polymers with both delayed fluorescence and long-wavelength emission.

Branched Copolymers with Tunable Clusteroluminescence in High Quantum Yield

A novel type of fluorescence without large conjugated structures called clusteroluminescence (CL) has attracted a great deal of attention in recent years. Despite its many advantages, the emerging CL still encounters difficulties of low quantum yield (QY) and preliminary mechanisms. In this work, the branched structure was introduced into poly(maleic anhydride-alt-vinyl acetate) by chain transfer monomer. The emission wavelength of the branched copolymers is red-shifted with the increase of branching degree, and the absolute QY of solids can reach up to 29.87%. Further characterizations reveal that the branched structure can improve the flexibility of polymer chains, thereby promoting the intrachain interactions of subgroups. Furthermore, in the case of branched anhydride copolymers, the equilibrium between intrachain interactions and nonradiative transitions holds a crucial significance in determining the QY. This endeavor not only offers new insights into the mechanism of CL but also presents a novel approach to surmount the low QY of anhydride copolymers, thus broadening the horizons of CLgens to unexplored domains.

Nonconventional Luminescent Piperazine-Containing Hyperbranched Polysiloxanes with Pure n-electron

Nonconventional luminogens with high quantum yield (QY) possess very potential applications in various fields. However, the preparation of such luminogens remains a great challenge. Herein, the first example of piperazine-containing hyperbranched polysiloxane exhibiting blue and green fluorescence is reported under the irradiation of different excitation wavelength and a high QY of 20.9%. The density functional theory (DFT) calculations and experimental results revealed that the through-space conjugation (TSC) within the clusters of N and O atoms is produced via the induction of multiple intermolecular hydrogen bonds and flexible SiO units, which is accountable for the fluorescence. Meanwhile, the introduction of the rigid piperazine units not only rigidifies the conformation, but also enhances the TSC. In addition, the fluorescence of both P1 and P2 shows concentration-, excitation-, and solvent-dependent emission, especially exhibits significant pH-dependent emission and obtains an ultrahigh QY of 82.6% at pH 5. The synthetic luminogens show excellent applications in fluorescence detection for Fe3+ and Co2+ , information encryption, and fluorescent film. This study provides a novel strategy to rationally design high-efficiency nonconventional luminogens.

3D Macrocyclic Structure Boosted Gene Delivery: Multi-Cyclic Poly(β-Amino Ester)s from Step Growth Polymerization

The topological structures of polymers play a critical role in determining their gene delivery efficiency. Exploring novel polymeric structures as gene delivery vectors is thus of great interest. In this work, a new generation of multi-cyclic poly(β-amino ester)s (CPAEs) with unique topology structure was synthesized for the first time via step growth polymerization. Through controlling the occurrence stage of cyclization, three types of CPAEs with rings of different sizes and topologies were obtained. In vitro experiments demonstrated that the CPAEs with macro rings (MCPAEs) significantly boosted the transgene expression comparing to their branched counterparts. Moreover, the MCPAE vector with optimized terminal group efficiently delivered the CRISPR plasmid coding both Staphylococcus aureus Cas9 nuclease and dual guide sgRNAs for gene editing therapy.

Hydrogen-Bonding-Driven Nontraditional Photoluminescence of a β-Enamino Ester

Nontraditional luminogens (NTLs) do not contain any conventional chromophores (large π-conjugated structures), but they do show intrinsic photoluminescence. To achieve photoluminescence from NTLs, it is necessary to increase the extent of through-space conjugation (TSC) and suppress nonradiative decay. Incorporating strong physical interactions such as hydrogen bonding is an effective strategy to achieve this. In this work, we carried out comparative studies on the photoluminescence behaviors of two β-enamino esters with similar chemical structures, namely methyl 3-aminocrotonate (MAC) and methyl (E)-3-(1-pyrrolidinyl)-2-butenoate (MPB). MAC crystal emits blue fluorescence under UV irradiation. The critical cluster concentration of MAC in ethanol solutions was determined by studying the relationship between the photoluminescence intensity (UV-visible absorbance) and concentration. Furthermore, MAC exhibits solvatochromism, and its emission wavelength redshifts as the solvent polarity increases. On the contrary, MPB is non-emissive in both solid state and solutions. Crystal structures and theoretical calculation prove that strong inter- and intramolecular hydrogen bonds lead to the formation of large amounts of TSC of MAC molecules in aggregated states. No hydrogen bonds and thus no effective TSC can be formed between or within MPB molecules, and this is the reason for its non-emissive nature. This work provides a deeper understanding of how hydrogen bonding contributes to the luminescence of NTLs.

Construction of room temperature phosphorescent materials with ultralong lifetime by in-situ derivation strategy

Although room temperature phosphorescence (RTP) materials have been widely investigated, it is still a great challenge to improve the performance of RTP materials by promoting triplet exciton generation and stabilization. In this study, an in-situ derivation strategy was proposed to construct efficient RTP materials by in-situ deriving guest molecules and forming a rigid matrix during co-pyrolysis of guest molecules and urea. Characterizations and theoretical calculations revealed that the generated derivatives were beneficial for promoting intersystem crossing (ISC) to produce more triplet excitons, while rigid matrix could effectively suppress the non-radiative transition of triplet excitons. Thus, the in-situ derivation strategy was concluded to simultaneously promote the generation and stabilization of triplet excitons. With this method, the ultralong lifetime of RTP materials could reach up to 5.33 s and polychromatic RTP materials were easily achieved. Moreover, the potential applications of the RTP materials in reprocessing or editable anti-counterfeiting were successfully demonstrated.

Designing Nonconventional Luminescent Materials with Efficient Emission in Dilute Solutions via Modulation of Dynamic Hydrogen Bonds

Nonconventional luminescent materials (NLMs) which do not contain traditional aromatic chromophores are of great interest due to their unique chemical structures, optical properties, and their potential applications in various areas, such as cellular imaging and chemical sensing. However, most reported NLMs show weak or no emission in dilute solutions, which severely limits their applications. In this work, dynamic hydrogen bonds were utilized to design NLMs with efficient emission in dilute solutions. To further validate the results, polymers P1 and P2 were successfully prepared and investigated. It was found that the luminescence quantum efficiency of P1 and P2 at a concentration of 0.1 mg/mL in water solution was 8.9 and 0.6%, respectively. The high efficiency can be attributed to the fact that polymer P1 has more intra- or intermolecular dynamic hydrogen bonds and other short interactions than P2 in dilute solutions, allowing P1 to achieve the through-space conjugation effect to increase the degree of system conjugation, restrict molecular motion, and decrease nonradiative transitions, which can effectively improve luminescence. In addition, polymer P2 exhibits the characteristics of clustering-triggered emission, excitation wavelength-dependent and concentration-dependent fluorescence properties, excellent photobleaching resistance, low cytotoxicity, and selective recognition of Fe³⁺. The present study investigates the manipulation of luminescence properties of NLMs in dilute solutions through the modulation of dynamic hydrogen bonds. This approach can serve as a semi-empirical technique for designing and building innovative NLMs in the times ahead.

Investigating the origin of laser-induced fluorescence in mannan-rich Phytelephas macrocarpa seeds before and after thermal aging

Natural polysaccharides, e.g., starch, cellulose and sodium alginate have been highlighted as unconventional chromophores owing to their chain structures containing clustered electron-rich groups and the rigidification imposed by inter/intramolecular interactions. On account of the abundant hydroxyl groups and dense packing of low-substituted (< 5 %) mannan chains, we have investigated the laser-induced fluorescence of mannan-rich vegetable ivory seeds (Phytelephas macrocarpa), both in the native state and after thermal aging. The untreated material emitted fluorescence at 580 nm (yellow-orange) when excited at 532 nm (green). This luminescence is intrinsic to the polysaccharide matrix abundant in crystalline homomannan, as demonstrated by lignocellulosic analyses, fluorescence microscopy, NMR, Raman, FTIR and XRD. Thermal aging at 140 °C and above intensified the yellow-orange fluorescence and caused the material to fluoresce when excited by a near-infrared laser (785 nm). In view of the clustering-triggered emission mechanism, the fluorescence of the untreated material can be attributed to hydroxyl clusters and the conformational rigidification in mannan I crystals. On the other hand, thermal aging caused dehydration and oxidative degradation of mannan chains, inducing the substitution of hydroxyl groups by carbonyls. These physicochemical changes may have affected cluster formation and increased conformational rigidification, enhancing fluorescence emission.

Substrate-Responsive Pillar[5]arene-Based Organic Room-Temperature Phosphorescence

Room-temperature phosphorescence (RTP) is a photophysical phenomenon typically associated with a long-lived emission that can be detected by the unaided eye. Several natural proteins display RTP, as do certain artificial polymers. In both cases, the RTP is ascribed to effective intramolecular through-space electronic communication. However, small molecules with internal electronic communication that enable RTP are relatively rare. Herein, we describe an alkyl halide-responsive RTP system consisting of a meta-formylphenyl-bearing pillar[5]arene derivative that supports effective through-space charge transfer (TSCT) within the pillararene cavity. Treatment with bromoethane, a heavy atom-containing guest for the pillar[5]arene host, serves to enhance the emission. An isomeric para-formylphenyl-bearing pillar[5]arene system proved ineffective in producing an RTP effect. Quantum chemical calculations based on single-crystal X-ray diffraction analyses provided insights into the structural determinants governing TSCT between the 1,4-dimethoxybenzene donor units and the formylphenyl groups of the pillar[5]arene, as well as the associated energy gaps and intersystem crossing channels. We believe that the present system and the associated mechanistic analysis provide the foundation for design of new small molecule with tunable RTP features.

Tunable Red Clusteroluminescence Polymers Prepared by a Simple Heating Process

Clusteroluminescence (CL) has drawn much attention in recent years. However, the design of red emission clusteroluminogens (CLgens) with tunable CL is still in its infancy. Herein, we report a simple heating process to prepare red emission poly(maleic anhydride-alt-vinyl acetate) (PMV) derivatives with a tunable maximum emission wavelength between 620 and 675 nm. First, heating above the glass transition temperature (T_g) would promote the movement of polymer chains and facilitate the formation of clusters in both solid and solution states. Then, heating beyond the decomposition temperature at which vinyl acetate converts into C═C is favorable to the formation of new clusters and large through-space conjugation among subgroups in polymer chains. Their synergistic effects realize the adjustable emission wavelength and higher quantum yield of polymers. Additionally, low-cost and eco-friendly core-shell PMV particles are prepared as agricultural light conversion agents and exhibit great compatibility with polyethylene.

Polymerization-induced emission (PIE) of multifunctional polyamides synthesized by Ugi polymerization and targeted imaging of lysosomes

In this paper, a series of polyamide derivatives (PAMs) containing morpholine groups were prepared by Ugi polymerization from dialdehyde, diacid, N-(2-aminoethyl)-morpholine and isonitrile compounds as novel multi-responsive fluorescent sensors. As non-conjugated light-emitting polymers, PAMs were endowed with unique polymerization-induced emission (PIE) performance at 450 nm by through-space conjugation (TSC) between heteroatoms and heterocycles. It was also found that PAMs exhibited reversible responses to the external temperature and pH values and became responsive fluorescent switches. In addition, PAMs can specifically recognize Fe³⁺ with a limit of detection (LOD) of 54 nM and the introduction of EDTA reversibly restores the fluorescence of the quenched PAMs-Fe³⁺ system. By virtue of thermosensitivity, PAMs are easily separated from the above system by changing the temperature above or below the lower critical solution temperature (LCST). It is worth noting that PIE-active PAMs with good biocompatibility can selectively accumulate in lysosomes due to the presence of morpholine groups, and its Pearson colocalization coefficient is as higher as 0.91. Furthermore, a PIE-active PAM was successfully used to track exogenous Fe³⁺ in lysosomes. In conclusion, these multi-functional PIE-active PAMs have higher potential applications in biomedical or environmental fields.

Improve Quantum Yield of Poly(Maleic Anhydride-Alt-Vinyl Acetate) via Good Solvents

In this study, the optical properties of poly(maleic anhydride-alt-vinyl acetate) (PMV) synthesized by different polymerization methods are studied systematically. Compared to self-stabilized precipitation polymerization (pPMV), solution polymerization produces PMV solids (sPMV) with an extraordinarily high quantum yield (QY) of 20.65%. Additionally, redissolving pPMV in good solvents (rPMV) will also help to increase QY. The rising QY of sPMV and rPMV supports the idea that good solvents will reduce the rigidity of polymer chains and promote cluster formation, which is confirmed by lower glass transition temperature (T_g ) and small angle X-ray scatterer (SAXS). The study also finds that PMV exhibits application potentials in white light-emitting diodes (WLEDs) and light conversion film.

Poly-L-aspartic acid based nonconventional luminescent biomacromolecules with efficient emission in dilute solutions for Al3+ detection

Nonconventional luminescent macromolecules exhibiting bright fluorescence or phosphorescence emission at high concentrations and solid-state have attracted significant attention due to their promising application in different fields. However, most reported nonconventional luminescent macromolecules show weak or no emission in dilute solutions, limiting their large-scale applications. Herein, nonconventional luminescent biomacromolecules with hydrophobic rigid chains, hydrophilic flexibility and inter- or intra-molecular hydrogen bonding interactions were proposed to achieve effective luminescence in dilute solutions. Poly-L-aspartic acid (PASA) with a fluorescence quantum yield of 4.6 % in a dilute solution (0.8 mg/mL) was synthesized to validate this design strategy. The fluorescence intensity of PASA solution increased with the increase of the concentration, demonstrating a clustering-triggered emission (CTE) effect. Furthermore, the fluorescence intensity significantly enhanced when adding Al³⁺ into PASA aqueous solution via the Al³⁺ recognition effect. The detection limits for Al³⁺ (1.71 × 10^-6 mol/L) meet the World Health Organization (WHO) requirements for food detection. At last, PASA solid-state samples exhibit room temperature phosphorescence emission.

Molecular-level enhanced clusterization-triggered emission of nonconventional luminophores in dilute aqueous solution

Nonconjugated and nonaromatic luminophores based on clustering-triggered emission derived from through-space conjugation have drawn emerging attention in recent years. The reported nonconventional luminophores are emissive in concentrated solution and/or in the solid state, but they tend to be nonluminescent in dilute solution, which greatly limits their sensing and imaging applications. Herein, we design unique clusteroluminogens through modification of cyclodextrin (CD) with amino acids to enable the intermolecular and intramolecular clusterization of chromophores in CD-based confined space. The resulted through-space interactions along with conformation rigidification originated from hydrogen bond interaction and complexation interaction generate blue to cyan fluorescence even in the dilute solution (0.035 wt.%, quantum yield of 40.70%). Moreover, the prepared histidine-modified CD (CDHis) is demonstrated for fluorescent detection of chlortetracycline with high sensitivity and selectivity. This work provides a new and universal strategy to synthesize nonconventional luminophores with bright fluorescence in dilute aqueous solution through molecular-level enhanced clusterization-triggered emission.

A Dynamic Supramolecular H-bonding Network with Orthogonally Tunable Clusteroluminescence

Enabling dynamically tunable emissive systems offers opportunities for constructing smart materials. Clusteroluminescence, as unconventional luminescence, has attracted increasing attention in both fundamental and applied sciences. Herein, we report a supramolecular poly(disulfides) network with tunable clusteroluminescence. The reticular H-bonds synergize the rigidity and mobility of dynamic networks, and endow the resulting materials with mechanical adaptivity and robustness, simultaneously enabling efficient clusteroluminescence and phosphorescence at 77 K. Orthogonally tunable luminescence are achieved in two manners, i.e., slow backbone disulfide exchange and fast side-chain metal coordination. Further exploration of the reprocessability and chemical closed-loop recycling of intrinsic dynamic networks for sustainable materials is feasible. We foresee that the synergistic strategy of dynamic chemistry offers a novel pathway and potential opportunities for smart emissive materials.

Water-soluble polymers with aggregation-induced emission and ultra-long room temperature phosphorescence

Achieving sky blue fluorescence emission and durable green RTP emission materials under air conditions by free radical polymerization.

Effects of Through-Bond and Through-Space Conjugations on the Photoluminescence of Small Aromatic and Aliphatic Aldimines

Through-bond conjugation (TBC) and/or through-space conjugation (TSC) determine the photophysical properties of organic luminescent compounds. No systematic studies have been carried out to understand the transition from aromatic TBC to non-aromatic TSC on the photoluminescence of organic luminescent compounds. In this work, a series of small aromatic and aliphatic aldimines were synthesized. For the aromatic imines, surprisingly, N,1-diphenylmethanimine with the highest TBC is non-emissive, while N-benzyl-1-phenylmethanimine and N-cyclohexyl-1-phenylmethanimine emit bright fluorescence in aggregate states. The aliphatic imines are all emissive, and their maximum emission wavelength decreases while the quantum yield increases with a decrease in steric hindrance. The imines show concentration-dependent and excitation-dependent emissions. Theoretical calculations show that the TBC extents in the aromatic imines are not strong enough to induce photoluminescence in a single molecule state, while the intermolecular TSC becomes dominant for the fluorescence emissions of both aromatic and aliphatic imines in aggregate states, and the configurations and spatial conformations of the molecules in aggregate states play a key role in the formation of effective TSC. This study provides an understanding of how chemical and spatial structures affect the formation of TBC and TSC and their functions on the photoluminescence of organic luminescent materials.

Molecularly Engineered Unparalleled Strength and Supertoughness of Poly(urea-urethane) with Shape Memory and Clusterization-Triggered Emission

To address the challenge of realizing multifunctional polymers simultaneously exhibiting high strength and high toughness through molecular engineering, ultrastrong and supertough shape-memory poly(urea-urethane) (PUU) is fabricated by regulating: i) the reversible cross-links composed of rigid units and multiple hydrogen bonds, and ii) the molecular weight of soft segments. The optimal material exhibits an unparalleled strength of 84.2 MPa at a large elongation at a break of 925.6%, a superior toughness of 322.8 MJ m^-3 , and remarkable fatigue resistance without fracture. The repeated stretching of this material induces an irreversible deformation, which, however, can be rapidly recovered by heating. Moreover, all samples are capable of temporary shape fixation at -40 °C (recovering the original shape at 30 °C) and exhibit blue fluorescence when excited at the optimum wavelength, which is ascribed to clusterization-triggered emission (CTE) due to the formation of microphase-separation structures. Thus, the adopted approach provides a solution to a long-standing problem and paves the way to the realization of intrinsically luminescent shape-memory materials exhibiting both ultrahigh strength and ultrahigh toughness.

Cluster-Dominated Electrochemiluminescence of Tertiary Amines in Polyethyleneimine Nanoparticles: Mechanism Insights and Sensing Application

Designing and screening highly efficient and cost-effective luminophores have always been a challenge to develop sensitive electrochemiluminescence (ECL) biosensors. Herein, polyethyleneimine nanoparticles (PEI NPs), a kind of nonconjugated polymer (NCP) NPs with tertiary amine clusters, were developed as an ECL luminophore. Specifically, PEI NPs were synthesized by a one-step hydrothermal method using PEI and formaldehyde. The properties of PEI NPs were investigated in detail using photochemical and electrochemical techniques. The results showed cluster-dominated luminescence of tertiary amines in PEI NPs via "through-space conjugation". This non-negligible ECL performance (at 631 nm) was also verified by the initiated reduction-oxidation process. With persulfate as a coreactant, PEI NPs acted as both the luminophore and coreaction accelerator to enhance the ECL intensity remarkably, which was eightfold higher than that of isolated PEI. Moreover, choosing dopamine as the model target, a highly sensitive "signal off" ternary ECL sensor was constructed utilizing PEI NPs as the luminophore. Dopamine could be oxidized to benzoquinone at the sensing interface, quenching the signal via ECL energy transfer. Free from any signal amplification, the proposed sensor achieved a low detection limit (4.3 nM) for target monitoring with good selectivity and stability. This strategy not only provides a unique perspective for designing novel efficient and facile ECL luminophores of tertiary amines but also broadens the biological application of NCP NPs.

High-Efficiency Long-Wavelength Fluorescent Hyperbranched Polysiloxanes: Synthesis, Emission Mechanism, Information Encryption, and Film Preparation

Unconventional fluorescent polymers possess the advantages of excellent biocompatibility, environmental friendliness, and facile structural regulation; however, such polymers usually have low fluorescence intensity and quantum yields in the long-wavelength range. In this work, three kinds of high-efficiency long-wavelength emissive hyperbranched polysiloxanes are obtained by introducing aromatic amino acids. These functionalized hyperbranched polysiloxanes have high fluorescence intensity and quantum yields in green, yellow, and red emission regions. Experimental results and density functional theory calculations reveal that the long-wavelength emission comes from the enhanced electronic communication among the conjugated π bonds, electron-rich atoms, and -Si(O)₃ and other functional groups. Especially, the conjugated π bonds efficiently enlarge the spatial electronic delocalizations, resulting in the high-efficiency long-wavelength emission. Moreover, the prepared polymers show excellent applications in information encryption and film preparation. This work could serve as a guide to develop high-efficiency long-wavelength unconventional fluorescent polymers.

Clustering-Triggered Emission of EPS-605 Nanoparticles and Their Application in Biosensing

Natural carbohydrates with intrinsic luminescent properties have drawn increasing attention thanks to their fundamental importance and promising applications. To expand the range of natural nonconventional biomacromolecule luminogens and to gain deep insights into their emission mechanism, we prepared EPS-605, a naturally occurring spherical nanoparticle based on negatively charged exopolysaccharides (EPS), and studied its emission behavior. It was found that EPS-605 was highly emissive in the aggregate state, such as powder and film. Furthermore, EPS-605 aqueous solutions exhibited concentration-enhanced emission characteristics. According to fluorescence spectra and confocal images, the fluorescence phenomenon of EPS-605 was not affected by the pH value and the carbon sources. The emission behavior of EPS-605 was attributed to the clustering-triggered emission (CTE) mechanism. Moreover, EPS-605 was successfully utilized for Fe3+ detection since its fluorescence could be selectively quenched by Fe3+. It could be used to detect Fe3+ with a low limit of detection (0.06 μM) and a wide detection range from 0.05 to 250 μM. Overall, these findings not only benefit the exploitation of EPS-based nonconventional biomacromolecule luminogens, but also reveal the potential applications of EPS-605 in biosensing/bioimaging, anticounterfeiting, and encryption owing to its excellent biocompatibility, environmental friendliness, and intrinsic photoluminescence property.

Schiff Base Aggregation-Induced Emission Luminogens for Sensing Applications: A Review

Fluorescence sensing can not only identify a target substrate qualitatively but also achieve the purpose of quantitative detection through the change of the fluorescence signal. It has the advantages of immense sensitivity, rapid response, and excellent selectivity. The proposed aggregation-induced emission (AIE) concept solves the problem of the fluorescence of traditional fluorescent molecules becoming weak or quenched in high concentration or aggregated state conditions. Schiff base fluorescent probes have the advantages of simple synthesis, low toxicity, and easy design. They are often used for the detection of various substances. In this review we cover late developments in Schiff base compounds with AIE characteristics working as fluorescence sensors.

Intrinsically fluorescent polyureas toward conformation-assisted metamorphosis, discoloration and intracellular drug delivery

Peptidomimetic polymers have attracted increasing interest because of the advantages of facile synthesis, high molecular tunability, resistance to degradation, and low immunogenicity. However, the presence of non-native linkages compromises their ability to form higher ordered structures and protein-inspired functions. Here we report a class of amino acid-constructed polyureas with molecular weight- and solvent-dependent helical and sheet-like conformations as well as green fluorescent protein-mimic autofluorescence with aggregation-induced emission characteristics. The copolymers self-assemble into vesicles and nanotubes and exhibit H-bonding-mediated metamorphosis and discoloration behaviors. We show that these polymeric vehicles with ultrahigh stability, superfast responsivity and conformation-assisted cell internalization efficiency could act as an “on-off” switchable nanocarrier for specific intracellular drug delivery and effective cancer theranosis in vitro and in vivo. This work provides insights into the folding and hierarchical assembly of biomacromolecules, and a new generation of bioresponsive polymers and nonconventional luminescent aliphatic materials for diverse applications.

Biomimetic materials are of interest but can often suffer from limitations caused by the non-native linkages used. Here, the authors report on the creation of amino acid constructed polyureas which can self-assemble into vesicles and nanotubes with aggregation induced fluorescence and the potential for drug delivery applications.

Poly(arylene piperidine) Quaternary Ammonium Salts Promoting Stable Long-Lived Room-Temperature Phosphorescence in Aqueous Environment

Room-temperature phosphorescence (RTP) materials have garnered considerable research attention owing to their excellent luminescence properties and potential application prospects in anti-counterfeiting, information storage, and optoelectronics. However, several RTP systems are extremely sensitive to humidity, and consequently, the realization of long-lived RTP in water remains a formidable challenge. Herein, a feasible and effective strategy is presented to achieve long-lived polymeric RTP systems, even in an aqueous environment, through doping of synthesized polymeric phosphor PBHDB into a poly(methyl methacrylate) (PMMA) matrix. Compared to the precursor polymer PBN and organic molecule HDBP, a more rigid polymer microenvironment and electrostatic interaction are formed between the PMMA matrix and polymer PBHDB, which effectively reduce the nonradiative decay rate of triplet excitons and dramatically increase the phosphorescence intensity. Specifically, the phosphorescence lifetime of the PBHDB@PMMA film (1258.62 ms) is much longer than those of PBN@PMMA (674.20 ms) and HDBP@PMMA (1.06 ms). Most importantly, a bright-green afterglow can be observed after soaking the PBHDB@PMMA film in water for more than a month. The excellent water resistance and reversible response properties endow these systems with promising potential for dynamic information encryption even in water.

Sustainable aggregation-induced emission material based on pectin-l-lysine: Potential antibacterial and monitoring in food spoilage

The demand of smart food detection system which in detecting food spoilage is increasing. In this work, a new type of aggregation-induced emission (AIE) compound was synthesized based on pectin (P) and l-lysine (Lys). P-Lys is an AIE active compound which has the advantages of simple synthesis, easy modification and processability, it also has good water solubility and biocompatibility. Moreover, P-Lys has potential application in detecting Fe³⁺ (oxidation from Fe²⁺) and bacterial in monitoring pork spoilage. In addition, P-Lys also has spectral antibacterial properties which can prevent pork spoilage. The research results shown that P-Lys, as a new type of food testing agent has a useful future in monitoring and protecting the freshness of food.