Tetraphenylcyclopentadiene Derivatives: Aggregation-Induced Emission, Adjustable Luminescence from Green to Blue, Efficient Undoped OLED Performance and Good Mechanochromic Properties

Copper-catalysed perarylation of cyclopentadiene: synthesis of hexaarylcyclopentadienes

While hexaphenylsilacyclopentadiene (hexaphenylsilole) is viewed as an archetypal Aggregation-Induced Emission (AIE) luminogen, its isostructural hydrocarbon surrogate hexaphenylcyclopentadiene has strikingly never been investigated in this context, most probably due to a lack of synthetic availability. Herein, we report a straightforward synthesis of hexaphenylcyclopentadiene, via the direct perarylation of cyclopentadiene upon copper(i) catalysis under microwave activation, with the formation of six new C-C bonds in a single synthetic operation. Using zirconocene dichloride as a convenient source of cyclopentadiene and a variety of aryl iodides as coupling partners, this copper-catalysed cross-coupling reaction gave rise to a series of unprecedented hexaarylcyclopentadienes. The latter are direct precursors of extended π-conjugated polycyclic compounds, and their cyclodehydrogenation under Scholl reaction conditions yielded helicenic 17,17-diarylcyclopenta[l,l']diphenanthrenes. These structurally complex polyannelated fluorene derivatives can now be prepared in only two synthetic steps from cyclopentadiene.

Robust luminogens as cutting-edge tools for efficient light emission in recent decades

Blue luminogens play a vital role in white lighting and potential metal-free fluorescent materials and their high-lying excited states contribute to harvesting triplet excitons in devices. However, in TADF-OLEDs (ΔEST < 0.1 eV), although T1 excitons transfer to S1via RISC with 100% IQE, the longer lifetime of blue TADF suffers from efficiency roll-off (RO). In this case, hybridized local and charge transfer (HLCT) materials have attracted significant interest in lighting owing to their 100% hot exciton harvesting and enhanced efficiency. Both academics and industrialists widely use the HLCT strategy to improve the efficiency of fluorescent organic light-emitting diodes (FOLEDs) by harvesting dark triplet excitons through the RISC process. Aggregation-induced emissive materials (AIEgens) possess tight packing in the aggregation state, and twisted AIEgens with HLCT behaviour have a shortened conjugation length, inducing blue emission and making them suitable candidates for OLED applications. TTA-OLEDs are used in commercial BOLEDs because of their moderate efficiency and reasonable operation lifetime. In this review, we discuss the devices based on TTA fluorophores, TADF fluorophores, HLCT fluorophores, AIEgens and HLCT-sensitized fluorophores (HLCT-SF), which break through the statistical limitations.

Fabrication of high performance based deep-blue OLED with benzodioxin-6-amine-styryl-triphenylamine and carbazole hosts as electroluminescent materials

The present study reports synthesis of phenathroimidazole derivatives structures following donor-acceptor relation for high performance deep-blue light emitting diodes. Herein, methyl substituted benzodioxin-6-amine phenanthroimidazoles Cz-SBDPI and TPA-SBDPI derivatives that provide the blue light were designed and synthesized. These Cz-SBDPI and TPA-SBDPI show higher glass transition (Tg) temperatures of 199 and 194 °C and demonstrate enhanced thermal properties. Apart from enhanced thermal stability these compounds also exhibit superior photophysical, electrochemical and electroluminescent properties. The non-doped carbazole based device display improved electroluminescent performances than those of TPA-based devices. The strong orbital-coupling due to decreased energy barrier between Cz-SBDPI transitions result in deep blue emission with CIE-0.15, 0.06. For non-doped Cz-SBDPI device; high L (brightness):12,984 cd/m2; ηc (current efficiency): 5.9 cd/A; ηp (power efficiency): 5.7 lm/W and ηex (external quantum efficiency): 6.2% was observed. The results show that the D-A emitters can serve as simple but also as an effective approach to devise cheap electroluminescent materials that has high efficiency and can serve as OLED devices.

AIE-based ratiometric fluorescent probe for mercury ion, medium-dependent fluorescence color change and optimized sensitivity in solid state

A new AIE-based luminogen TPES, as a ratiometric fluorescence probe for mercury(II) was readily synthesized. The probe combined the advantages of the outstanding specificity of Hg2+-triggered deprotection reaction of thioketal and the brilliant emission of AIEgens in aggregated state. Once encountered aqueous Hg2+, fluorescent color of TPES in THF-H2O (fw = 98%) altered from blue to green rapidly, while other metal cations gave no interference to the probe. And the mechanism of this chemosensor was carefully verified by 1H NMR analysis, FTIR and MS spectra. As expected, TPES exhibits excellent selectivity and sensitivity towards Hg2+ in the solid state. When using filter paper as the solid medium, the fabricated test strips could signify Hg2+ ions with the LOD as 1 × 10-5 M (Hg2+ in aqueous solution), accompanied with a distinct emitting altered from blue to green. Furthermore, by changing the medium from filter paper to silica gel plate, a more significant fluorescence alteration from blue to yellow was achieved, and the LOD was further optimized to 1 × 10-6 M as discerned by naked-eye.

New-Fashioned Universal and Functional Host-Material from a Near-Ultraviolet Organic Emitter for High-Efficiency Organic Light-Emitting Diodes with Low Efficiency Roll-Offs

In this work, a near-ultraviolet (NUV) emitter, 2MCz-CNMCz, with hot-exciton property is designed based on a "long-short axis" strategy, which exhibits good thermal stability, bipolar carrier transport ability, and high T₁ energy level. Its nondoped NUV organic light-emitting diode (OLED) achieves a record maximum external quantum efficiency (η_ext ) of 7.76%, with a peak at 404 nm and CIE coordinates of (0.158, 0.039). The corresponding high exciton utilization efficiency (η_r ) in the electroluminescence process reveals its potential as a functional sensitizing host. As expected, the TBPe-based blue fluorescent OLED with 2MCz-CNMCz as the host material shows better efficiency and lower efficiency roll-off than that with traditional host material mCP. Meanwhile, the Ir complexes-based green/yellow/red phosphorescent OLEDs with 2MCz-CNMCz host are also fabricated, reaching high η_ext values of 26.1%, 30.4%, and 20.4%, respectively, and displaying negligible efficiency roll-offs at 1000 cd m^-2 , which are among the best OLED performances based on the same emitters. To the authors' best knowledge, this is the first report on the design of high-quality universal and functional host material, and may bring new inspiration to the preparation of high-efficiency, low roll-off, full-color OLEDs.

Multi-stimuli distinct responsive D–A based fluorogen oligomeric tool and efficient detection of TNT vapor

P1 shows distinct emission responses with multi-stimuli, i.e., quenching for TNT sensing, red shifting for acid and base vapors, blue shifting against MFC behavior, and solvent polarity-dependent emission.

Simple-Structured OLEDs Incorporating Undoped Phosphorescent Emitters Within Non-Exciplex Forming Interfaces: Towards Ultraslow Efficiency Roll-Off and Low Driving Voltage for Indoor R/G/B Illumination

To meet the requirement of indoor R/G/B monochrome illumination a simplified OLEDs structure and fabrication process must occur. Herein, a design philosophy of low efficiency roll-off and simple-structure OLEDs incorporating R/G/B phosphorescent ultrathin non-doped emissive layers (EMLs) within non-exciplex forming interfaces a luminescent system by a direct charge trapping mechanism has been reported, which uses bis(2-methyldibenzo[f,h]-quinoxaline)(acetylacetonate)iridium(III) (MDQ)₂Ir(acac), bis(3-phenylpyridin-e)iridium(III) (Ir(ppy)₃), and bis(3,5-difluoro-2 -(2-pyridyl)phenyl-(2-carboxypyridyl) iridiumII) (Firpic) as R/G/B luminescent dyes, respectively. Although the recombination zone is narrow in the designed OLEDs, the efficiency roll-off of the designed OLEDs are unexpectedly slow, due to stable charge trapping of the emitters and are refrained from concentration quenching in relatively low current density, but the luminance meets the requirement of indoor lighting. With a low threshold voltage of 2.9/2.9/3.5 V, the designed R/G/B phosphorescent OLEDs show an efficiency roll-off as low as 7.6/3.2/4.3% for indoor luminance from 10 cd/m² to 1,000 cd/m², respectively. The perspective of R/G/B luminescent dyes on luminous efficiency, chromaticity coordinate drifts, efficiency roll-off, and direct charge trapping has been thoroughly studied. Therefore, our research may help to further develop ideal indoor lighting using a simplified undoped R/G/B OLEDs structure with simultaneous ultraslow efficiency roll-off, low threshold voltage, simplified fabrication process, low reagent consumption, and cost.

Photoresponsive spiro-polymers generated in situ by C-H-activated polyspiroannulation

The development of facile and efficient polymerizations toward functional polymers with unique structures and attractive properties is of great academic and industrial significance. Here we develop a straightforward C-H-activated polyspiroannulation route to in situ generate photoresponsive spiro-polymers with complex structures. The palladium(II)-catalyzed stepwise polyspiroannulations of free naphthols and internal diynes proceed efficiently in dimethylsulfoxide at 120 °C without the constraint of apparent stoichiometric balance in monomers. A series of functional polymers with multisubstituted spiro-segments and absolute molecular weights of up to 39,000 are produced in high yields (up to 99%). The obtained spiro-polymers can be readily fabricated into different well-resolved fluorescent photopatterns with both turn-off and turn-on modes based on their photoinduced fluorescence change. Taking advantage of their photoresponsive refractive index, we successfully apply the polymer thin films in integrated silicon photonics techniques and achieve the permanent modification of resonance wavelengths of microring resonators by UV irradiation.

Opposite mechanoluminescence behavior of two isomers with different linkage positions

A new strategy for producing pure organic “high molecular weight” ML luminogens was proposed by simply changing linkage positions between aromatic blocks.

Doping-free circularly polarized electroluminescence of AIE-active chiral binaphthyl-based polymers

AIE-active chiral polymer enantiomers (S-/R-P) can emit green circularly polarized electroluminescence (CP-EL) with g_EL up to 0.024.

A Pyridoindole-Based Multifunctional Bioprobe: pH-Induced Fluorescence Switching and Specific Targeting of Lipid Droplets

A versatile fluorescent probe, PITE, based on alkyl-substituted pyridoindole (PI) and tetraphenylethylene (TE), which exhibits facile pH-induced fluorescence switching in solution, as nanoparticles, and in the solid state, is presented. Strong fluorescence in the solid state, as well as in solution and the aggregated state, allow sensing of toxic acid vapors. Fluorescence "off-on" switching of PITE through exposure to trifluoroacetic acid and triethylamine vapor is visualized by the naked eye. A unified picture of the switchable fluorescence of PITE is obtained by comprehensive spectroscopic investigations coupled with quantum mechanical calculations. Strong fluorescence, a large Stokes shift, high photostability, and biocompatibility of PITE make it a viable probe for subcellular imaging. Extensive fluorescence microscopic studies by employing organisms including lower and higher eukaryotes reveal specific localization of PITE to lipid droplets (LDs). LDs are dynamic subcellular organelles linked to various physiological processes and human diseases. Hence, the specific detection of LDs in diverse organisms is important to biomedical research and healthcare. Isolation of LDs and subsequent colocalization studies ascertain selective targeting of LDs by the easily affordable, lipophilic bioprobe, PITE. Thus, PITE is a promising multifunctional probe for chemosensing and the selective tracking of LDs.