Advanced Photoacoustic Imaging Applications of Near-Infrared Absorbing Organic Nanoparticles

Organic nanoparticles with tunable size and rigidity by hyperbranching and cross-linking using microemulsion ATRP

Unlike inorganic nanoparticles, organic nanoparticles (oNPs) offer the advantage of "interior tailorability," thereby enabling the controlled variation of physicochemical characteristics and functionalities, for example, by incorporation of diverse functional small molecules. In this study, a unique inimer-based microemulsion approach is presented to realize oNPs with enhanced control of chemical and mechanical properties by deliberate variation of the degree of hyperbranching or cross-linking. The use of anionic cosurfactants led to oNPs with superior uniformity. Benefitting from the high initiator concentration from inimer and preserved chain-end functionality during atom transfer radical polymerization (ATRP), the capability of oNPs as a multifunctional macroinitiator for the subsequent surface-initiated ATRP was demonstrated. This facilitated the synthesis of densely tethered poly(methyl methacrylate) brush oNPs. Detailed analysis revealed that exceptionally high grafting densities (~1 nm-2) were attributable to multilayer surface grafting from oNPs due to the hyperbranched macromolecular architecture. The ability to control functional attributes along with elastic properties renders this "bottom-up" synthetic strategy of macroinitiator-type oNPs a unique platform for realizing functional materials with a broad spectrum of applications.

Semiconducting Polymers Based on Asymmetric Thiadiazoloquinoxaline for Augmented In Vivo NIR-II Photoacoustic Imaging

A photoacoustic (PA) imaging technique using the second near-infrared (NIR-II) window has attracted more and more attention because of its merits of deeper penetration depth and higher signal-to-noise (S/N) ratio than that using the first near-infrared (NIR-I) one. However, the design and development of high-performance PA imaging contrast agents in the NIR-II window is still a challenge. A semiconducting polymer, constructed by asymmetric units, exhibits regiorandom characteristics that effectively increase the distortion of the backbone. This increase in the degree of twist can regulate the twisted intramolecular charge transfer (TICT) effect, resulting in an enhancement of the PA signal. In this paper, an asymmetric structural acceptor strategy is developed to improve the PA signals of the resulting semiconducting polymer (PATQ-MP) in the NIR-II window with improved brightness, higher S/N ratio, and better photothermal conversion efficiency compared to polymers with the same main-chain structure containing a symmetric acceptor. DFT analysis showed that PATQ-MP containing an asymmetric acceptor monomer had a larger dihedral angle, which effectively improved the PA signal intensity by enhancing the TICT effect. The PEG-encapsulated PATQ-MP nanoparticles exhibit promising performance in the PA imaging of mouse tumors in vivo, demonstrating the clear identification of microvessels as small as 100 μm along with rapid metabolism within a span of 5 h. Therefore, this work provides a unique molecular design strategy for improving the signal intensity of PA imaging in the NIR-II window.

A Macrophage Membrane-Coated Cu-WO3-x-Hydro820 Nanoreactor for Treatment and Photoacoustic/Fluorescence Dual-Mode Imaging of Inflamed Liver Tissue

A disease-targeting nanoplatform that integrates imaging with therapeutic activity would facilitate early diagnosis, treatment, and therapeutic monitoring. To this end, a macrophage membrane-coated Cu-WO3-x-Hydro820 (CWHM) nanoreactor was prepared. This reactor was shown to target inflammatory tissues. The reactive oxygen species (ROS) such as H2O2 and ·OH in inflammatory tissues can react with Hydro820 in the reactor to form the NIR fluorophore IR820. This process allowed photoacoustic/fluorescence dual-mode imaging of H2O2 and ·OH, and it is expected to permit visual diagnosis of inflammatory diseases. The Cu-WO3-x nanoparticles within the nanoreactor shown catalase and superoxide enzyme mimetic activity, allowing the nanoreactor to catalyze the decomposition of H2O2 and ·O2- in inflammatory cells of hepatic tissues in a mouse model of liver injury, thus alleviating the oxidative stress of damaged liver tissue. This nanoreactor illustrates a new strategy for the diagnosis and treatment of hepatitis and inflammatory liver injury.

Influence mechanism of the temporal duration of laser irradiation on photoacoustic technique: a review

Significance

In the photoacoustic (PA) technique, the laser irradiation in the time domain (i.e., laser pulse duration) governs the characteristics of PA imaging-it plays a crucial role in the optical-acoustic interaction, the generation of PA signals, and the PA imaging performance.

Aim

We aim to provide a comprehensive analysis of the impact of laser pulse duration on various aspects of PA imaging, encompassing the signal-to-noise ratio, the spatial resolution of PA imaging, the acoustic frequency spectrum of the acoustic wave, the initiation of specific physical phenomena, and the photothermal-PA (PT-PA) interaction/conversion.

Approach

By surveying and reviewing the state-of-the-art investigations, we discuss the effects of laser pulse duration on the generation of PA signals in the context of biomedical PA imaging with respect to the aforementioned aspects.

Results

First, we discuss the impact of laser pulse duration on the PA signal amplitude and its correlation with the lateral resolution of PA imaging. Subsequently, the relationship between the axial resolution of PA imaging and the laser pulse duration is analyzed with consideration of the acoustic frequency spectrum. Furthermore, we examine the manipulation of the pulse duration to trigger physical phenomena and its relevant applications. In addition, we elaborate on the tuning of the pulse duration to manipulate the conversion process and ratio from the PT to PA effect.

Conclusions

We contribute to the understanding of the physical mechanisms governing pulse-width-dependent PA techniques. By gaining insight into the mechanism behind the influence of the laser pulse, we can trigger the pulse-with-dependent physical phenomena for specific PA applications, enhance PA imaging performance in biomedical imaging scenarios, and modulate PT-PA conversion by tuning the pulse duration precisely.

Nanotheranostics: Molecular Diagnostics and Nanotherapeutic Evaluation by Photoacoustic/Ultrasound Imaging in Small Animals

Nanotheranostics is a rapidly developing field that integrates nanotechnology, diagnostics, and therapy to provide novel methods for imaging and treating wide categories of diseases. Targeted nanotheranostics offers a platform for the precise delivery of theranostic agents, and their therapeutic outcomes are monitored in real-time. Presently, in vivo magnetic resonance imaging, fluorescence imaging, ultrasound imaging, and photoacoustic imaging (PAI), etc. are noninvasive imaging techniques that are preclinically available for the imaging and tracking of therapeutic outcomes in small animals. Additionally, preclinical imaging is essential for drug development, phenotyping, and understanding disease stage progression and its associated mechanisms. Small animal ultrasound imaging is a rapidly developing imaging technique for theranostics applications due to its merits of being nonionizing, real-time, portable, and able to penetrate deep tissues. Recently, different types of ultrasound contrast agents have been explored, such as microbubbles, echogenic exosomes, gas-vesicles, and nanoparticles-based contrast agents. Moreover, an optical image obtained through photoacoustic imaging is a noninvasive imaging technique that creates ultrasonic waves when pulsed laser light is used to expose an object and creates a picture of the tissue's distribution of light energy absorption on the object. Contrast agents for photoacoustic imaging may be endogenous (hemoglobin, melanin, and DNA/RNA) or exogenous (dyes and nanomaterials-based contrast agents). The integration of nanotheranostics with photoacoustic and ultrasound imaging allows simultaneous imaging and treatment of diseases in small animals, which provides essential information about the drug response and the disease progression. In this review, we have covered various endogenous and exogenous contrast agents for ultrasound and photoacoustic imaging. Additionally, we have discussed various drug delivery systems integrated with contrast agents for theranostic application. Further, we have briefly discussed the current challenges associated with ultrasound and photoacoustic imaging.

Photothermal therapy of copper incorporated nanomaterials for biomedicine

Studies have reported on the significance of copper incorporated nanomaterials (CINMs) in cancer theranostics and tissue regeneration. Given their unique physicochemical properties and tunable nanostructures, CINMs are used in photothermal therapy (PTT) and photothermal-derived combination therapies. They have the potential to overcome the challenges of unsatisfactory efficacy of conventional therapies in an efficient and non-invasive manner. This review summarizes the recent advances in CINMs-based PTT in biomedicine. First, the classification and structure of CINMs are introduced. CINMs-based PTT combination therapy in tumors and PTT guided by multiple imaging modalities are then reviewed. Various representative designs of CINMs-based PTT in bone, skin and other organs are presented. Furthermore, the biosafety of CINMs is discussed. Finally, this analysis delves into the current challenges that researchers face and offers an optimistic outlook on the prospects of clinical translational research in this field. This review aims at elucidating on the applications of CINMs-based PTT and derived combination therapies in biomedicine to encourage future design and clinical translation.

Data mining and library generation to search electron-rich and electron-deficient building blocks for the designing of polymers for photoacoustic imaging

Photoacoustic imaging is a good method for biological imaging, for this purpose, materials with strong near infrared (NIR) absorbance are required. In the present study, machine learning models are used to predict the light absorption behavior of polymers. Molecular descriptors are utilized to train a variety of machine learning models. Building blocks are searched from chemical databases, as well as new building blocks are designed using chemical library enumeration method. The Breaking Retrosynthetically Interesting Chemical Substructures (BRICS) method is employed for the creation of 10,000 novel polymers. These polymers are designed based on the input of searched and selected building blocks. To enhance the process, the optimal machine learning model is utilized to predict the UV/visible absorption maxima of the newly designed polymers. Concurrently, chemical similarity analysis is also performed on the selected polymers, and synthetic accessibility of selected polymers is calculated. In summary, the polymers are all easy to synthesize, increasing their potential for practical applications.

X-Ray-Induced Drug Release for Cancer Therapy

Drug delivery systems (DDSs) are designed to deliver therapeutic agents to specific target sites while minimizing systemic toxicity. Recent developments in drug-loaded DDSs have demonstrated promising characteristics and paved new pathways for cancer treatment. Light, a prevalent external stimulus, is widely utilized to trigger drug release. However, conventional light sources primarily concentrate on the ultraviolet (UV) and visible light regions, which suffer from limited biological tissue penetration. This limitation hinders applications for deep-tissue tumor drug release. Given their deep tissue penetration and well-established application technology, X-rays have recently received attention for the pursuit of controlled drug release. With precise spatiotemporal and dosage controllability, X-rays stand as an ideal stimulus for achieving controlled drug release in deep-tissue cancer therapy. This article explores the recent advancements in using X-rays for stimulus-triggered drug release in DDSs and delves into their action mechanisms.

Interfacial Compatibility of Core-Shell Cellulose Nanocrystals for Improving Dynamic Covalent Adaptable Networks' Fracture Resistance in Nanohybrid Vitrimer Composites

The development of polymeric nanocomposites with dynamic covalent adaptable networks and biobased nanomaterials has been a promising approach toward sustainable advanced materials, enabling reprogramming and recycling capabilities. Herein, a core-shell nanohybrid of functionalized cellulose nanocrystals (CNCs) is explored to provide crucial interfacial compatibility for improving the covalent adaptable networks of epoxy-thiol vitrimers in fracture resistance. The poly(ε-caprolactone) (PCL) shells grafted from CNC surfaces can be cross-linked with the covalent adaptable networks via a hot-pressing transesterification process. According to the additive concentration and annealing temperature, the stress relaxation behavior of nanohybrid vitrimer composites can be effectively regulated by the core-shell PCL-grafted CNC (CNC-PCL) nanohybrids from a dispersed to cross-linked interaction. The addition of 15 wt % of the core-shell CNC-PCLs exhibits the reinforced improvement of nanohybrid vitrimer composites in the average Young's modulus of 2.5×, fracture stress of 5.4×, and fracture strain of 2.0×. The research findings might have profound implications for developing synergistic interfacial compatibility between dynamic vitrimer networks and functional nanoparticles for advanced polymeric nanocomposites.

Conjugated Polymeric Materials in Biological Imaging and Cancer Therapy

Conjugated polymers (CPs) have attracted much attention in the fields of chemistry, medicine, life science, and material science. Researchers have carried out a series of innovative researches and have made significant research progress regarding the unique photochemical and photophysical properties of CPs, expanding the application range of polymers. CPs are polymers formed by the conjugation of multiple repeating light-emitting units. Through precise control of their structure, functional molecules with different properties can be obtained. Fluorescence probes with different absorption and emission wavelengths can be obtained by changing the main chain structure. By modifying the side chain structure with water-soluble groups or selective recognition molecules, electrostatic interaction or specific binding with specific targets can be achieved; subsequently, the purpose of selective recognition can be achieved. This article reviews the research work of CPs in cell imaging, tumor diagnosis, and treatment in recent years, summarizes the latest progress in the application of CPs in imaging, tumor diagnosis, and treatment, and discusses the future development direction of CPs in cell imaging, tumor diagnosis, and treatment.

Recent Advances of Diketopyrrolopyrrole Derivatives in Cancer Therapy and Imaging Applications

Cancer is threatening the survival of human beings all over the world. Phototherapy (including photothermal therapy (PTT) and photodynamic therapy (PDT)) and bioimaging are important tools for imaging-mediated cancer theranostics. Diketopyrrolopyrrole (DPP) dyes have received more attention due to their high thermal and photochemical stability, efficient reactive oxygen species (ROS) generation and thermal effects, easy functionalization, and tunable photophysical properties. In this review, we outline the latest achievements of DPP derivatives in cancer therapy and imaging over the past three years. DPP-based conjugated polymers and small molecules for detection, bioimaging, PTT, photoacoustic imaging (PAI)-guided PTT, and PDT/PTT combination therapy are summarized. Their design principles and chemical structures are highlighted. The outlook, challenges, and future opportunities for the development of DPP derivatives are also presented, which will give a future perspective for cancer treatment.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Application of functional peptides in the electrochemical and optical biosensing of cancer biomarkers

Early screening and diagnosis are the most effective ways to prevent the occurrence and progression of cancers, thus many biosensing strategies have been developed to achieve economic, rapid, and effective detection of various cancer biomarkers. Recently, functional peptides have been gaining increasing attention in cancer-related biosensing due to their advantageous features of a simple structure, ease of synthesis and modification, high stability, and good biorecognition, self-assembly and antifouling capabilities. Functional peptides can not only act as recognition ligands or enzyme substrates for the selective identification of different cancer biomarkers but also function as interfacial materials or self-assembly units to improve the biosensing performances. In this review, we summarize the recent advances in functional peptide-based biosensing of cancer biomarkers according to the used techniques and the roles of peptides. Particular attention is focused on the use of electrochemical and optical techniques, both of which are the most commonly used techniques in the field of biosensing. The challenges and promising prospects of functional peptide-based biosensors in clinical diagnosis are also discussed.

Smart Biomimetic Nanozymes for Precise Molecular Imaging: Application and Challenges

New nanotechnologies for imaging molecules are widely being applied to visualize the expression of specific molecules (e.g., ions, biomarkers) for disease diagnosis. Among various nanoplatforms, nanozymes, which exhibit enzyme-like catalytic activities in vivo, have gained tremendously increasing attention in molecular imaging due to their unique properties such as diverse enzyme-mimicking activities, excellent biocompatibility, ease of surface tenability, and low cost. In addition, by integrating different nanoparticles with superparamagnetic, photoacoustic, fluorescence, and photothermal properties, the nanoenzymes are able to increase the imaging sensitivity and accuracy for better understanding the complexity and the biological process of disease. Moreover, these functions encourage the utilization of nanozymes as therapeutic agents to assist in treatment. In this review, we focus on the applications of nanozymes in molecular imaging and discuss the use of peroxidase (POD), oxidase (OXD), catalase (CAT), and superoxide dismutase (SOD) with different imaging modalities. Further, the applications of nanozymes for cancer treatment, bacterial infection, and inflammation image-guided therapy are discussed. Overall, this review aims to provide a complete reference for research in the interdisciplinary fields of nanotechnology and molecular imaging to promote the advancement and clinical translation of novel biomimetic nanozymes.

Family of hNQO1 Activatable Near-Infrared Fluoro-Photoacoustic Probes for Diagnosis of Wound Infection and Ulcerative Colitis

Bacterial infections can easily occur when patients mishandle wounds or eat moldy food. The prompt diagnosis of a bacterial infection could effectively reduce the risk of possible anatomical damage. However, non-invasive early detection of bacterial infections is difficult to achieve due to the lack of favorable tools. Here, we designed two hNQO1 fluorescent probes (RX2 and RX3) to visualize bacterial infection after deep learning on the pathogenesis of bacterial infection. RX2 and RX3 enable early detection of bacterial infection and are verified to be, respectively, suitable for fluorescence imaging (FLI) and photoacoustic imaging (PAI) by comparing the signal-to-background ratio of both probes in a mouse model of myositis caused by Escherichia coli infection. In view of the difference in penetration depth between the two imaging modalities, we further applied RX2 for FLI of E. coli-infected wounds and RX3 for PAI of E. coli-infected inflammatory bowel disease, suggesting the great potential of both probes for early diagnosis of bacterial infections.

Nanoparticles-based phototherapy systems for cancer treatment: Current status and clinical potential

Remarkable progress in phototherapy has been made in recent decades, due to its non-invasiveness and instant therapeutic efficacy. In addition, with the rapid development of nanoscience and nanotechnology, phototherapy systems based on nanoparticles or nanocomposites also evolved as an emerging hotspot in nanomedicine research, especially in cancer. In this review, first we briefly introduce the history of phototherapy, and the mechanisms of phototherapy in cancer treatment. Then, we summarize the representative development over the past three to five years in nanoparticle-based phototherapy and highlight the design of the innovative nanoparticles thereof. Finally, we discuss the feasibility and the potential of the nanoparticle-based phototherapy systems in clinical anticancer therapeutic applications, aiming to predict future research directions in this field. Our review is a tutorial work, aiming at providing useful insights to researchers in the field of nanotechnology, nanoscience and cancer.

Design and application of organic contrast agents for molecular imaging in the second near infrared (NIR-II) window

Optical imaging in the second near-infrared (NIR-II) window has attracted interest in recent years because of the merits of reduced light scattering, minimal autofluorescence from biological tissues and deeper penetration depth in this wavelength range. In this review, we summarize NIR-II organic contrast agents reported in the past decade for photoacoustic and fluorescence imaging including members of the cyanine family, D-A-D structure dyes, phthalocyanines and semiconducting polymers. Improved imaging contrast and higher resolution could be favorably achieved by rational design of NIR-II fluorophores by tuning their properties including molar extinction coefficient, fluorescence quantum yield, emission wavelength and others. A wide variety of applications using NIR-II dyes has been realized including imaging of tumors, lymphatics, brains, intestines and others. Emerging applications such as targeted imaging and activable imaging with improved resolution and sensitivity have been demonstrated by innovative chemical modification of NIR-II dyes. Looking forward, rational design of improved NIR-II dyes for advanced bioimaging is likely to remain an area of interest for next-generation potential approaches to disease diagnosis.

Multifunctional nanotheranostics for near infrared optical imaging-guided treatment of brain tumors

Malignant brain tumors, a heterogeneous group of primary and metastatic neoplasms in the central nervous system (CNS), are notorious for their highly invasive and devastating characteristics, dismal prognosis and low survival rate. Recently, near-infrared (NIR) optical imaging modalities including fluorescence imaging (FLI) and photoacoustic imaging (PAI) have displayed bright prospect in innovation of brain tumor diagnoses, due to their merits, like noninvasiveness, high spatiotemporal resolution, good sensitivity and large penetration depth. Importantly, these imaging techniques have been widely used to vividly guide diverse brain tumor therapies in a real-time manner with high accuracy and efficiency. Herein, we provide a systematic summary of the state-of-the-art NIR contrast agents (CAs) for brain tumors single-modal imaging (e.g., FLI and PAI), dual-modal imaging (e.g., FLI/PAI, FLI/magnetic resonance imaging (MRI) and PAI/MRI) and triple-modal imaging (e.g., MRI/FLI/PAI and MRI/PAI/computed tomography (CT) imaging). In addition, we update the most recent progress on the NIR optical imaging-guided therapies, like single-modal (e.g., photothermal therapy (PTT), chemotherapy, surgery, photodynamic therapy (PDT), gene therapy and gas therapy), dual-modal (e.g., PTT/chemotherapy, PTT/surgery, PTT/PDT, PDT/chemotherapy, PTT/chemodynamic therapy (CDT) and PTT/gene therapy) and triple-modal (e.g., PTT/PDT/chemotherapy, PTT/PDT/surgery, PTT/PDT/gene therapy and PTT/gene/chemotherapy). Finally, we discuss the opportunities and challenges of the CAs and nanotheranostics for future clinic translation.

Multifunctional nanomaterials and nanocomposites for sensing and monitoring of environmentally hazardous heavy metal contaminants

The applications of conventional sensors are limited by the long response time, high cost, large detection limit, low sensitivity, complicated usage and low selectivity. These sensors are nowadays replaced by Nanocomposite-based modalities and nanomaterials which are known for their high selectivity and physical and chemical properties. These nanosensors effectively detect heavy metal contaminants in the environment as the discharge of heavy metals into natural water as a result of human activity has become a global epidemic. Exposure to these toxic metals might induce many health-related complications, including kidney failure, brain injury, immune disorders, muscle paleness, cardiac damage, nervous system impairment and limb paralysis. Therefore, designing and developing novel sensing systems for the detection and recognition of these harmful metals in various environmental matrices, particularly water, is of extremely important. Emerging nanotechnological approaches in the past two decades have played a key role in overcoming environmentally-related problems. Nanomaterial-based fabrication of chemical nanosensors has widely been applied as a powerful analytical tool for sensing heavy metals. Portability, high sensitivity, on-site detection capability, better device performance and selectivity are all advantages of these nanosensors. The detection and selectivity have been improved using molecular recognition probes for selective binding on different nanostructures. This study aims to evaluate the sensing properties of various nanomaterials such as metal-organic frameworks, fluorescent materials, metal-based nanoparticles, carbon-based nanomaterials and quantum dots and graphene-based nanomaterials and quantum dots for heavy metal ions recognition. All these nano-architectures are frequently served as effective fluorescence probes to directly (or by modification with some large or small biomolecules) sense heavy metal ions for improved selectivity. However, efforts are still needed for the simultaneous designing of multiple metal ion-based detection systems, exclusively in colorimetric or optical fluorescence nanosensors for heavy metal cations.

Higher-order correlation based real-time beamforming in photoacoustic imaging

Although a delay-and-sum (DAS) beamformer is best suited for real-time photoacoustic (PA) image formation, the reconstructed images are often afflicted by noises, sidelobes, and other intense artifacts due to inaccurate assumptions in PA signal correlation. The present work aims to develop a reconstruction method that reduces the occurrence of sidelobes and artifacts and thus improves the reconstructed image quality or imaging performance. This beamformer is fundamentally based on higher-order signal correlation wherein a higher number of delayed PA signals-compared to conventional delay-multiply-and-sum (DMAS)-are combined and summed up. The proposed technique provides significant improvements in resolution, contrast, and signal-to-noise ratio (SNR) compared to traditional beamformers. For real-time implementation, the proposed algorithms were simplified, and their computational complexities were shrunk to the order of DAS [O(N)]. A GPU based study was also performed to validate the real-time capability of the proposed beamformers. For validation studies, both numerical simulation and experiments were conducted. Quantitative evaluation studies involving SNR, contrast ratio, generalized contrast-to-noise ratio, and FWHM demonstrate that the proposed higher-order DMAS beamformer is superior in PA image reconstruction. Conclusively, the proposed beamformer uniquely facilitates real-time PA image reconstruction with an achievable frame rate close to DAS and DMAS but with better imaging performance, which holds promise for real-time PA imaging and its clinical applications.

Biomedical Photoacoustic Imaging for Molecular Detection and Disease Diagnosis: "Always-On" and "Turn-On" Probes

Photoacoustic (PA) imaging is a nonionizing, noninvasive imaging technique that combines optical and ultrasonic imaging modalities to provide images with excellent contrast, spatial resolution, and penetration depth. Exogenous PA contrast agents are created to increase the sensitivity and specificity of PA imaging and to offer diagnostic information for illnesses. The existing PA contrast agents are categorized into two groups in this review: "always-on" and "turn-on," based on their ability to be triggered by target molecules. The present state of these probes, their merits and limitations, and their future development, is explored.

Contrast Agents for Photoacoustic Imaging: A Review Focusing on the Wavelength Range

Photoacoustic imaging using endogenous chromophores as a contrast has been widely applied in biomedical studies owing to its functional imaging capability at the molecular level. Various exogenous contrast agents have also been investigated for use in contrast-enhanced imaging and functional analyses. This review focuses on contrast agents, particularly in the wavelength range, for use in photoacoustic imaging. The basic principles of photoacoustic imaging regarding light absorption and acoustic release are introduced, and the optical characteristics of tissues are summarized according to the wavelength region. Various types of contrast agents, including organic dyes, semiconducting polymeric nanoparticles, gold nanoparticles, and other inorganic nanoparticles, are explored in terms of their light absorption range in the near-infrared region. An overview of the contrast-enhancing capacity and other functional characteristics of each agent is provided to help researchers gain insights into the development of contrast agents in photoacoustic imaging.

Porphyrin-Based Nanoparticles: A Promising Phototherapy Platform

Phototherapy, including photodynamic therapy and photothermal therapy, is an emerging form of non-invasive treatment. The combination of imaging technology and phototherapy is becoming an attractive development in the treatment of cancer, as it allows for highly effective therapeutic results through image-guided phototherapy. Porphyrins have attracted significant interest in the treatment and diagnosis of cancer due to their excellent phototherapeutic effects in phototherapy and their remarkable imaging capabilities in fluorescence imaging, magnetic resonance imaging and photoacoustic imaging. However, porphyrins suffer from poor water solubility, low near-infrared absorption and insufficient tumor accumulation. The development of nanotechnology provides an effective way to improve the bioavailability, phototherapeutic effect and imaging capability of porphyrins. This review highlights the research results of porphyrin-based small molecule nanoparticles in phototherapy and image-guided phototherapy in the last decade and discusses the challenges and directions for the development of porphyrin-based small molecule nanoparticles in phototherapy.

Image-guided/improved diseases management: From immune-strategies and beyond

Timely and accurate assessment and diagnosis are extremely important and beneficial for all diseases, especially for some of the major human disease, such as cancers, cardiovascular diseases, infectious diseases, and neurodegenerative diseases. Limited by the variable disease microenvironment, early imperceptible symptoms, complex immune system interactions, and delayed clinical phenotypes, disease diagnosis and treatment are difficult in most cases. Molecular imaging (MI) techniques can track therapeutic drugs and disease sites in vivo and in vitro in a non-invasive, real-time and visible strategies. Comprehensive visual imaging and quantitative analysis based on different levels can help to clarify the disease process, pathogenesis, drug pharmacokinetics, and further evaluate the therapeutic effects. This review summarizes the application of different MI techniques in the diagnosis and treatment of these major human diseases. It is hoped to shed a light on the development of related technologies and fields.

Looking deep inside tissue with photoacoustic molecular probes: a review

Significance

Deep tissue noninvasive high-resolution imaging with light is challenging due to the high degree of light absorption and scattering in biological tissue. Photoacoustic imaging (PAI) can overcome some of the challenges of pure optical or ultrasound imaging to provide high-resolution deep tissue imaging. However, label-free PAI signals from light absorbing chromophores within the tissue are nonspecific. The use of exogeneous contrast agents (probes) not only enhances the imaging contrast (and imaging depth) but also increases the specificity of PAI by binding only to targeted molecules and often providing signals distinct from the background.

Aim

We aim to review the current development and future progression of photoacoustic molecular probes/contrast agents.

Approach

First, PAI and the need for using contrast agents are briefly introduced. Then, the recent development of contrast agents in terms of materials used to construct them is discussed. Then, various probes are discussed based on targeting mechanisms, in vivo molecular imaging applications, multimodal uses, and use in theranostic applications.

Results

Material combinations are being used to develop highly specific contrast agents. In addition to passive accumulation, probes utilizing activation mechanisms show promise for greater controllability. Several probes also enable concurrent multimodal use with fluorescence, ultrasound, Raman, magnetic resonance imaging, and computed tomography. Finally, targeted probes are also shown to aid localized and molecularly specific photo-induced therapy.

Conclusions

The development of contrast agents provides a promising prospect for increased contrast, higher imaging depth, and molecularly specific information. Of note are agents that allow for controlled activation, explore other optical windows, and enable multimodal use to overcome some of the shortcomings of label-free PAI.

Molecular imaging nanoprobes for theranostic applications

As a non-invasive imaging monitoring method, molecular imaging can provide the location and expression level of disease signature biomolecules in vivo, leading to early diagnosis of relevant diseases, improved treatment strategies, and accurate assessment of treating efficacy. In recent years, a variety of nanosized imaging probes have been developed and intensively investigated in fundamental/translational research and clinical practice. Meanwhile, as an interdisciplinary discipline, this field combines many subjects of chemistry, medicine, biology, radiology, and material science, etc. The successful molecular imaging not only requires advanced imaging equipment, but also the synthesis of efficient imaging probes. However, limited summary has been reported for recent advances of nanoprobes. In this paper, we summarized the recent progress of three common and main types of nanosized molecular imaging probes, including ultrasound (US) imaging nanoprobes, magnetic resonance imaging (MRI) nanoprobes, and computed tomography (CT) imaging nanoprobes. The applications of molecular imaging nanoprobes were discussed in details. Finally, we provided an outlook on the development of next generation molecular imaging nanoprobes.

Assessment of the epi-pericardial fibrotic substrate by collagen-targeted probes

The identification of the fibrotic arrhythmogenic substrate as a means of improving the diagnosis and prediction of atrial fibrillation has been a focus of research for many years. The relationship between the degree of atrial fibrosis as a major component of atrial cardiomyopathy and the recurrence of arrhythmia after AF ablation can correlate. While the focus in identification and characterisation of this substrate has been centred on the atrial wall and the evaluation of atrial scar and extracellular matrix (ECM) expansion by late gadolinium-enhancement (LGE) on cardiac magnetic resonance imaging (CMRI), LGE cannot visualise diffuse fibrosis and diffuse extravasation of gadolinium. The atrial pericardium is a fine avascular fibrous membranous sac that encloses the atrial wall, which can undergo remodelling leading to atrial disease and AF. Nevertheless, little attention has been given to the detection of its fibrocalcification, impact on arrhythmogenesis and, most importantly, on the potential prothrombotic role of epi-pericardial remodelling in generation of emboli. We have recently reported that tracers against collagen I and IV can provide a direct assessment of the ECM, and thus can estimate fibrotic burden with high sensitivity. Here, we show the ability of these optical tracers to identify epi-pericardial fibrosis, as well as to demonstrate subtle interstitial fibrosis of the atrial wall in a mouse model of beta-2-adrenergic receptor (β₂-AR) cardiac overexpression.

Background-suppressed tumor-targeted photoacoustic imaging using bacterial carriers

Photoacoustic (PA) imaging offers promise for biomedical applications due to its ability to image deep within biological tissues while providing detailed molecular information; however, its detection sensitivity is limited by high background signals that arise from endogenous chromophores. Genetic reporter proteins with photoswitchable properties enable the removal of background signals through the subtraction of PA images for each light-absorbing form. Unfortunately, the application of photoswitchable chromoproteins for tumor-targeted imaging has been hampered by the lack of an effective targeted delivery scheme; that is, photoswitchable probes must be delivered in vivo with high targeting efficiency and specificity. To overcome this limitation, we have developed a tumor-targeting delivery system in which tumor-homing bacteria (Escherichia coli) are exploited as carriers to affect the point-specific delivery of genetically encoded photochromic probes to the tumor area. To improve the efficiency of the desired background suppression, we engineered a phytochrome-based reporter protein (mDrBphP-PCMm/F469W) that displays higher photoswitching contrast than those in the current state of the art. Photoacoustic computed tomography was applied to achieve good depth and resolution in the context of in vivo (mice) imaging. The present system effectively integrates a genetically encoded phytochrome-based reporter protein, PA imaging, and synthetic biology (GPS), to achieve essentially background-suppressed tumor-targeted PA monitoring in deep-seated tissues. The ability to image tumors at substantial depths may enable target-specific cancer diagnoses to be made with greater sensitivity, fidelity, and specificity.

Emergence of Nano-Dentistry as a Reality of Contemporary Dentistry

(1) Background. Nanotechnology offers significant alternative ways to solve scientific, medical, and human health issues. Dental biomaterials were improved by nanotechnology. It manufactures better materials or improves the existing ones and forms the basis of novel methods for disease diagnosis and prevention. Modern nanotechnology makes oral health care services more acceptable for patients. Nanotechnology is now important area of research, covering a broad range of applications in dentistry. (2) Methods. Relevant literature from Scopus published in English was selected using the keywords “nanoparticle” and “dentistry”. To the selected articles we applied the inclusion and exclusion criteria to choose the relevant ones. (3) Results. Based on the relevant articles, a literature review was prepared. This review provides an insight into the applications of nanotechnology in various branches of dentistry. We applied several regression models to fit number of papers versus time and chose the best one. We used it to construct the forecast and its 95%-confidence interval for the number of publications in 2022–2026. (4) Conclusions. It shows that a significant rise in papers is expected. This review familiarizes dentists with properties and benefits of nanomaterials and nanotechnology. Additionally, it can help scientists to consider the direction of their research and to plan prospective research projects.

NIR-II Functional Materials for Photoacoustic Theranostics

Photoacoustic imaging (PAI) has attracted great attention in the diagnosis and treatment of diseases due to its noninvasive properties. Especially in the second near-infrared (NIR-II) window, PAI can effectively avoid the interference of tissue spontaneous fluorescence and light scattering, and obtain high resolution images with deeper penetration depth. Because of its ideal spectral absorption and high conversion efficiency, NIR-II PA contrast agents overcome the absorption or emission of NIR-II light by endogenous biomolecules. In recent years, a series of NIR-II PA contrast agents have been developed to improve the performance of PAI in disease diagnosis and treatment. In this paper, the research progress of NIR-II PA contrast agents and their applications in biomedicine are reviewed. PA contrast agents are classified according to their composition, including inorganic contrast agents, organic contrast agents, and hybrid organic-inorganic contrast agents. The applications of NIR-II PA contrast agents in medical imaging are described, such as cancer imaging, inflammation detection, brain disease imaging, blood related disease imaging, and other biomedical application. Finally, the research prospects and breakthrough of NIR-II PA contrast agents are discussed.

The bright future of nanotechnology in lymphatic system imaging and imaging-guided surgery

Lymphatic system is identified the second vascular system after the blood circulation in mammalian species, however the research on lymphatic system has long been hampered by the lack of comprehensive imaging modality. Nanomaterials have shown the potential to enhance the quality of lymphatic imaging due to the unparalleled advantages such as the specific passive targeting and efficient co-delivery of cocktail to peripheral lymphatic system, ease molecular engineering for precise active targeting and prolonged retention in the lymphatic system of interest. Multimodal lymphatic imaging based on nanotechnology provides a complementary means to understand the kinetics of lymphoid tissues and quantify its function. In this review, we introduce the established approaches of lymphatic imaging used in clinic and summarize their strengths and weaknesses, and list the critical influence factors on lymphatic imaging. Meanwhile, the recent developments in the field of pre-clinical lymphatic imaging are discussed to shed new lights on the design of new imaging agents, the improvement of delivery methods and imaging-guided surgery strategies.

Co-delivery of NIR-II semiconducting polymer and pH-sensitive doxorubicin-conjugated prodrug for photothermal/chemotherapy

Semiconducting polymer (SP) is a promising photothermal agent in the antitumor application, but the co-delivery of the second near-infrared window (NIR-II)-based SPs with chemotherapeutic drug (e.g., doxorubicin (DOX)) remains a challenge. Here, SPs were firstly improved via backbone and alkyl side-chain engineering, and afterward, SPs and pH-sensitive prodrug copolymer self-assembled into a nanoparticle for a photoacoustic (PA)-imaging guided combination of photothermal therapy and chemotherapy. SP-encapsulated nanoparticles exhibited a high photothermal conversion efficiency of 45% at a relatively low power level of NIR irradiation (0.3 W/cm2 for 5 min). DOX was rapidly released in response to the acidic lysosomal environment. PA and fluorescence imaging confirmed that the photothermal therapy effectively drove DOX penetration inside tumor tissue, and it resulted in the killing of the surviving tumor cells from hyperthermia. The synergistic effect of SP-based photothermal therapy and DOX-induced chemotherapy was verified in vivo. Overall, the co-delivery of the SP and DOX using pH-sensitive nanoparticles represents a feasible strategy for photothermal therapy with potentially synergistic drug effects. STATEMENT OF SIGNIFICANCE: Recent years have yielded great progress in semiconducting polymers (SPs)-based photothermal therapy for anticancer treatment. However, studies about molecular weight and side-chain of SPs on photothermal conversion efficiency are limited, and investigation of controlled codelivery with chemotherapeutic drug is lacking. Here, we improved the SPs performance via backbone and side-chain engineering, and afterward offered a pH-sensitive DOX-conjugated amphiphilic copolymer to encapsulate SPs. SP-encapsulated nanoparticles exhibited high photothermal conversion efficiency at a clinically feasible power level of NIR irradiation. NIR irradiation-generated hyperthermia not only killed tumor cells but also promoted DOX penetration inside the tumor tissue to ablate the tumor cells that survived hyperthermia. The synergistic effect of SP-based photothermal therapy and DOX-induced chemotherapy was verified in vivo.

The Chemistry of Organic Contrast Agents in the NIR-II Window

Optical imaging, especially fluorescence and photoacoustic imaging, possesses non-invasiveness, high spatial and temporal resolution, and high sensitivity, etc., compared to positron emission tomography (PET) or magnetic resonance imaging (MRI). Due to the merits from the second near infrared (NIR-II) window imaging, like deeper penetration depth, high signal-to-noise ratio, high resolution, and low tissue damage, researchers devote great efforts to develop contrast agents with NIR-II absorption or emission. In this review, we summarized recently developed organic luminescent and photoacoustic materials, ranging from small molecules to conjugated polymers. Then, we systematically introduced engineering strategies and their imaging performance, classified by the skeleton cores. Finally, we elucidated the challenges and prospective of these NIR-II organic dyes for potential clinical applications. We hope our summary can inspire further development of NIR-II contrast agents.

Chemistry, Functionalization, and Applications of Recent Monoelemental Two-Dimensional Materials and Their Heterostructures

The past decades have witnessed a rapid expansion in investigations of two-dimensional (2D) monoelemental materials (Xenes), which are promising materials in various fields, including applications in optoelectronic devices, biomedicine, catalysis, and energy storage. Apart from graphene and phosphorene, recently emerging 2D Xenes, specifically graphdiyne, borophene, arsenene, antimonene, bismuthene, and tellurene, have attracted considerable interest due to their unique optical, electrical, and catalytic properties, endowing them a broader range of intriguing applications. In this review, the structures and properties of these emerging Xenes are summarized based on theoretical and experimental results. The synthetic approaches for their fabrication, mainly bottom-up and top-down, are presented. Surface modification strategies are also shown. The wide applications of these emerging Xenes in nonlinear optical devices, optoelectronics, catalysis, biomedicine, and energy application are further discussed. Finally, this review concludes with an assessment of the current status, a description of existing scientific and application challenges, and a discussion of possible directions to advance this fertile field.

Molecular Probes for Autofluorescence-Free Optical Imaging

Optical imaging is an indispensable tool in clinical diagnostics and fundamental biomedical research. Autofluorescence-free optical imaging, which eliminates real-time optical excitation to minimize background noise, enables clear visualization of biological architecture and physiopathological events deep within living subjects. Molecular probes especially developed for autofluorescence-free optical imaging have been proven to remarkably improve the imaging sensitivity, penetration depth, target specificity, and multiplexing capability. In this Review, we focus on the advancements of autofluorescence-free molecular probes through the lens of particular molecular or photophysical mechanisms that produce long-lasting luminescence after the cessation of light excitation. The versatile design strategies of these molecular probes are discussed along with a broad range of biological applications. Finally, challenges and perspectives are discussed to further advance the next-generation autofluorescence-free molecular probes for in vivo imaging and in vitro biosensors.

Recent Strategies to Develop Innovative Photosensitizers for Enhanced Photodynamic Therapy

This review presents a robust strategy to design photosensitizers (PSs) for various species. Photodynamic therapy (PDT) is a photochemical-based treatment approach that involves the use of light combined with a light-activated chemical, referred to as a PS. Attractively, PDT is one of the alternatives to conventional cancer treatment due to its noninvasive nature, high cure rates, and low side effects. PSs play an important factor in photoinduced reactive oxygen species (ROS) generation. Although the concept of photosensitizer-based photodynamic therapy has been widely adopted for clinical trials and bioimaging, until now, to our surprise, there has been no relevant review article on rational designs of organic PSs for PDT. Furthermore, most of published review articles in PDT focused on nanomaterials and nanotechnology based on traditional PSs. Therefore, this review aimed at reporting recent strategies to develop innovative organic photosensitizers for enhanced photodynamic therapy, with each example described in detail instead of providing only a general overview, as is typically done in previous reviews of PDT, to provide intuitive, vivid, and specific insights to the readers.

Near infrared photothermal conversion materials: mechanism, preparation, and photothermal cancer therapy applications

Photothermal therapy (PTT) has been widely applied in cancer therapy as a result of its non-invasive, localized treatment and good therapeutic effect. In general, the final therapeutic effect of PTT mainly depends on the photothermal materials, which can be further considered to be determined by the photothermal conversion efficiency, biocompatibility, and photothermal stability of photothermal materials. In this review, photothermal materials including inorganic materials, organic materials, and organic-inorganic composite materials in recent years have been summarized in terms of the mechanism, preparation, and cancer therapy applications. In the end, the perspectives and obstacles in their further development are overviewed.

Conjugated Polymers: Optical Toolbox for Bioimaging and Cancer Therapy

Conjugated polymers (CPs) are capable of coordinating the electron coupling phenomenon to bestow powerful optoelectronic features. The light-harvesting and light-amplifying properties of CPs are extensively used in figuring out the biomedical issues with special emphasis on accurate diagnosis, effective treatment, and precise theranostics. This review summarizes the recent progress of CP materials in bioimaging, cancer therapeutics, and introduces the design strategies by rationally tuning the optical properties. The recent advances of CPs in bioimaging applications are first summarized and the challenges to clear the future directions of CPs in the respective area are discussed. In the following sections, the focus is on the burgeoning applications of CPs in phototherapy of the tumor, and illustrates the underlying photo-transforming mechanism for further molecular designing. Besides, the recent progress in the CPs-assistant drug therapy, mainly including drug delivery, gene therapeutic, the optical-activated reversion of tumor resistance, and synergistic therapy has also been discussed elaborately. In the end, the potential challenges and future developments of CPs on cancer diagnosis and therapy are also illuminated for the improvement of optical functionalization and the promotion of clinical translation.

Black Phosphorus/Polymers: Status and Challenges

As a newly emerged mono-elemental nanomaterial, black phosphorus (BP) has been widely investigated for its fascinating physical properties, including layer-dependent tunable band gap (0.3-1.5 eV), high ON/OFF ratio (10⁴ ), high carrier mobility (10³ cm² V^-1 s^-1 ), excellent mechanical resistance, as well as special in-plane anisotropic optical, thermal, and vibrational characteristics. However, the instability caused by chemical degradation of its surface has posed a severe challenge for its further applications. A focused BP/polymer strategy has more recently been developed and implemented to hurdle this issue, so at present BP/polymers have been developed that exhibit enhanced stability, as well as outstanding optical, thermal, mechanical, and electrical properties. This has promoted researchers to further explore the potential applications of black phosphorous. In this review, the preparation processes and the key properties of BP/polymers are reviewed, followed by a detailed account of their diversified applications, including areas like optoelectronics, bio-medicine, and energy storage. Finally, in accordance with the current progress, the prospective challenges and future directions are highlighted and discussed.

A high-contrast photoacoustic agent with near-infrared emission

Benzobisthiadiazole as a typical electron acceptor, has been widely used to design fluorescent dyes and photoacoustic (PA) agents. With the strategy of constructing donor-acceptor-donor (D-A-D) type of electron characteristics, benzobisthiadiazole derivatives tend to behave stable in near-infrared absorption and emission, which is beneficial to PA imaging. In this chapter, two molecular design strategies are combined to improve the photoacoustic imaging effects of new PA contrast agent IR-1302 NPs, by installing strengthened conjugated bridges and electron donors. The nanoparticles exhibit high-contrast noninvasive photoacoustic imaging in tumor models with longer wavelength absorption and emission and show potential as a clinic contrast agent.

Highly Controlled Janus Organic-Inorganic Nanocomposite as a Versatile Photoacoustic Platform

Controlling the structural order of nanoparticles (NPs), morphology, and composition is of paramount significance in tailoring the physical properties of nanoassembly. However, the commonly reported symmetrical nanocomposites often suffer an interference or sacrifice of the photophysical properties of the original components. To address this challenge, we developed a novel type of organic-inorganic Janus nanocomposite (JNCP) with an asymmetric architecture, offering unique features such as the precisely controlled localization of components, combined modular optical properties, and independent stimuli. As a proof of concept, JNCPs were prepared by incorporating two photoacoustic (PA) imaging agents, namely an organic semiconducting dye and responsive gold nanoparticles (AuNP) assembly in separate compartments of JNCP. Theoretical simulation results confirmed that the formation mechanism of JNCPs arises from the entropy equilibrium in the system. The AuNP assembly generated a PA images with the variation of pH, while the semiconducting molecule served as an internal PA standard agent, leading to ratiometric PA imaging of pH. JNCP based probe holds great potential for real-time and accurate detection of diverse biological targets in living systems.

Nonlinear mechanisms in photoacoustics-Powerful tools in photoacoustic imaging

Many nonlinear effects have been discovered and developed in photoacoustic imaging. These nonlinear mechanisms have been explored for different utilizations, such as enhancing imaging contrast, measuring tissue temperature, achieving super-resolution imaging, enabling functional imaging, and extracting important physical parameters. This review aims to introduce different nonlinear mechanisms in photoacoustics, underline the fundamental principles, highlight their representative applications, and outline the occurrence conditions and applicable range of each nonlinear mechanism. Furthermore, this review thoroughly discusses the nonlinearity rule concerning how the mathematical structure of the nonlinear dependence is correlated to its practical applications. This summarization is useful for identifying and guiding the potential applications of nonlinearity based on their mathematical expressions, and is helpful for new nonlinear mechanism discovery or implementation in the future, which facilitates further breakthroughs in nonlinear photoacoustics.