Nematic DNA Thermotropic Liquid Crystals with Photoresponsive Mechanical Properties

DNA liquid crystals with AIE effect toward humidity-indicating biomaterials

In this study, by fabricating DNA doped with tetraphenylethene-containing ammonium surfactant, the resulting solvent-free DNA ionic complex could undergo a humidity-induced phase change that could be well tracked by the fluorescence signal of the surfactant. Taking advantage of the humidity-induced change in fluorescence, the reported ionic DNA complex could accurately indicate the humidity in real time.

Collective cell behaviors manipulated by synthetic DNA nanostructures

Cellular collective motion in confluent epithelial monolayers is involved in many processes such as embryo development, carcinoma invasion, and wound healing. The development of new chemical strategies to achieve large-scale control of cells' collective motion is essential for biomedical applications. Here a series of DNA nanostructures with different dimensions were synthesized and their influences on cells' collective migration and packing behaviors in epithelial monolayers were investigated. We found that the framed DNA nanoassemblies effectively reduced the cells' speed by increasing the rigidity of cells, while the lipid-DNA micelles had a more pronounced effect on cells' projection area and shape factor. These DNA nanostructures all significantly enhanced the dependence of cells' speed on their shape factor. Our results indicate that cells' mobility in monolayers can be manipulated by chemical intercellular interactions without any genetic intervention. This may provide a new chemical strategy for tissue engineering and tumor therapy.

Azobenzene-containing surfactant directs small features of DNA thermotropic liquid crystals via bottom-up and top-down strategies

Compared to classical block copolymers, the self-assembly of small molecules shows an advantage in addressing small features. As a new type of solvent-free ionic complexes, azobenzene-containing DNA thermotropic liquid crystals (TLCs) form an assembly as block copolymers when using small DNA. However, the self-assembly behavior of such biomaterials has not been fully investigated. In this study, photoresponsive DNA TLCs are fabricated by employing an azobenzene-containing surfactant with double flexible chains. For these DNA TLCs, the self-assembly behavior of DNA and surfactants could be guided by the factors of the molar ratio of azobenzene-containing surfactant, dsDNA/ssDNA, and presence or absence of water, which addresses the bottom-up control on domain spacing of mesophase. Meanwhile, such DNA TLCs also gain top-down control on morphology via photoinduced phase change. This work would provide a strategy for regulating the small features of solvent-free biomaterials, facilitating the development of patterning templates based on photoresponsive biomaterials. STATEMENT OF SIGNIFICANCE: The relationship between nanostructure and function is attractive in the science of biomaterials. With biocompatibility and degradability, photoresponsive DNA materials in solutions have been widely studied in biological and medical areas, but they are still hard to obtain in a condensed state. The complex created with designed azobenzene-containing surfactants paves the way for obtaining condensed photoresponsive DNA materials. However, fine control of the small features of such biomaterials has not yet been achieved. In this study, we present a bottom-up strategy of controlling the small features of such DNA materials and, simultaneously, the top-down control of morphology via photoinduced phase change. This work provides a bi-directional approach to controlling the small features of condensed biomaterials.

Photoliquefiable Azobenzene Surfactants toward Solar Thermal Fuels that Upgrade Photon Energy Storage via Molecular Design

Photoresponsive phase change materials (PPCMs) are capable of storing photon and heat energy simultaneously and releasing the stored energy as heat in a controllable way. While, the azobenzene-based PPCMs exhibit a contradiction between gravimetric energy storage density and photoinduced phase change. Here, a type of azobenzene surfactants with balance between molecular free volume and intermolecular interaction is designed in molecular level, which can address the coharvest of photon energy and low-grade heat energy at room temperature. Such PPCMs gain the total gravimetric energy density up to 131.18 J g^-1 by charging solid sample and 160.50 J g^-1 by charging solution. Notably, the molar isomerization enthalpy upgrades by a factor of up to 2.4 compared to azobenzene. The working mechanism is explained by the computational studies. All the stored energy can release out as heat under Vis light, causing a fast surface temperature rise. This study demonstrates a new molecular designing strategy for developing azobenzene-based PPCMs with high gravimetric energy density by improving the photon energy storage.

Phase Equilibria and Critical Behavior in Nematogenic MBBA-Isooctane Monotectic-Type Mixtures

The transition from the isotropic (I) liquid to the nematic-type (N) uniaxial phase appearing as the consequence of the elongated geometry of elements seems to be a universal phenomenon for many types of suspensions, from solid nano-rods to biological particles based colloids. Rod-like thermotropic nematogenic liquid crystalline (LC) compounds and their mixtures with a molecular solvent (Sol) can be a significant reference for this category, enabling insights into universal features. The report presents studies in 4'-methoxybenzylidene-4-n-butylaniline (MBBA) and isooctane (Sol) mixtures, for which the monotectic-type phase diagram was found. There are two biphasic regions (i) for the low (TP1, isotropic liquid-nematic coexistence), and (ii) high (TP2, liquid-liquid coexistence) concentrations of isooctane. For both domains, biphasic coexistence curves' have been discussed and parameterized. For TP2 it is related to the order parameter and diameter tests. Notable is the anomalous mean-field type behavior near the critical consolute temperature. Regarding the isotropic liquid phase, critical opalescence has been detected above both biphasic regions. For TP2 it starts ca. 20 K above the critical consolute temperature. The nature of pretransitional fluctuations in the isotropic liquid phase was tested via nonlinear dielectric effect (NDE) measurements. It is classic (mean-field) above TP1 and non-classic above the TP2 domain. The long-standing problem regarding the non-critical background effect was solved to reach this result.

Stimuli-Responsive Liquid-Crystal-Infused Porous Surfaces for Manipulation of Underwater Gas Bubble Transport and Adhesion

Biomimetic artificial surfaces that enable the manipulation of gas bubble mobility have been explored in a wide range of applications in nanomaterial synthesis, surface defouling, biomedical diagnostics, and therapeutics. Although many superhydrophobic surfaces and isotropic-lubricant-infused porous surfaces have been developed to manipulate gas bubbles, the simultaneous control over the adhesion and transport of gas bubbles underwater remains a challenge. Thermotropic liquid crystals (LCs), a class of structured fluids, provide an opportunity to tune the behavior of gas bubbles through LC mesophase transitions using a variety of external stimuli. Using this central idea, the design and synthesis of LC-infused porous surfaces (LCIPS) is reported and the effects of the LC mesophase on the transport and adhesion of gas bubbles on LCIPS immersed in water elucidated. LCIPS are demonstrated to be a promising class of surfaces with an unprecedented level of responsiveness and functionality, which enables the design of cyanobacteria-inspired object movement, smart catalysts, and bubble gating devices to sense and sort volatile organic compounds and control oxygen levels in biomimetic cell cultures.

Thermodynamic stability of cis-azobenzene containing DNA materials based on van der Waals forces

Taking advantage of van der Waals forces, an azobenzene-containing surfactant with a stable cis-state was designed and synthesized to fabricate photoresponsive DNA material. The reported DNA material exhibited reversible liquid crystalline-to-isotropic liquid transition under UV/Vis illuminations via the trans-cis isomerization of azobenzene. It also gained the ability to maintain the isotropic liquid state after UV light had ceased thanks to the thermodynamic stability of the cis-isomer of the azobenzene-containing surfactant. This work provides a design strategy for fabricating photoresponsive phase-change biomaterials.

Photoregulative phase change biomaterials showing thermodynamic and mchanical stabilities

Azobenzenes are great photochromic molecules for switching the physical properties of various materials via trans-cis isomerization. However, the UV light resulted cis-azobenzene is metastable and thermodynamically gets back to trans-azobenzene after ceasing UV irradiation, which causes an unwanted property change of azobenzene-containing materials. Additionally, thermal and mechanical conditions would accelerate this process dramatically. In this present work, a new type of azobenzene-containing surfactant is designed for the fabrication of photoresponsive phase change biomaterials. With a "locked" cis-azobenzene conformation, the resulting biomaterials could maintain their disordered state after ceasing UV light, which exhibit great resistance to thermal and piezo conditions. Interestingly, the "locked" cis-azobenzene could be unlocked by Vis light in high efficiency, which opens a new way for the design of phase change materials only responding to light. By showing stable cis-azobenzene maintained physical state, the newly fabricated biomaterials provide new potential for the construction of advanced materials, like self-healing materials, with less use of long time UV irradiation for maintaining their disordered states.

Photoswitchable solvent-free DNA thermotropic liquid crystals toward self-erasable shape information recording biomaterials

Soft thermotropic liquid crystals (TLCs) have advantages on processability and shape memory compared to hard solids and fluids. The development of photoswitchable soft TLCs based on biomolecules would afford reworkable shape information recording biomaterials for the areas requiring biocompatibility and degradability. In recent years, anhydrous DNA TLCs composed of DNA and ammonium surfactants have been receiving continuous attention. However, the photoswitchable phase transition has not been realized for soft DNA TLCs at room temperature, owing to the absence of functional ammonium surfactant. Herein, a new type of azobenzene-containing surfactant would be applied to the fabrication of soft DNA TLCs with photoresponsive physical properties. The double-chain design of the used surfactant and the use of DOAB as a dopant guarantee the soft state of DNA TLCs at r.t., which also facilitates the azobenzene isomerization by reducing the packing density of surfactants. With the assistance of photoisomerization of azobenzene, the reported DNA TLCs achieve reversible liquid crystal-isotropic liquid transition at temperatures below clearing points even at room temperature. The repeatable shape information recording and self-erasing tests indicate these DNA TLCs would be good shape information recording biomaterials in the future. This work also provides a useful strategy for designing photoresponsive soft biomaterials based on rigid biomolecules like DNA.

Photoliquefiable DNA-surfactant ionic crystals: Anhydrous self-healing biomaterials at room temperature

Development of photoliquefiable solid-state biomaterials at room temperature would address scientific challenges in life science. However, external stimuli-induced phase transitions are difficult for some biomacromolecules based materials, due to the high rigidity of these biomolecules. In this present work, by delicate molecule design on azobenzene-type ammonium surfactants, two new types of DNA-surfactant materials are fabricated. At room temperature, these DNA materials show photoliquefaction of ionic crystals to isotropic liquids under UV light, and fast self-assembly from isotropic liquids back to crystals after ceasing UV light, under the assistance of azobenzene isomerization. To achieve this objective, the designed solid-state DNA materials should have melting points near room temperature and an immediate liquid crystal to isotropic liquid transition process just above the melting points, which highly depends on the stoichiometric charge ratio between DNA and surfactants. As proved by the successful self-healing tests, these DNA ionic crystals are good biomaterials with potential applications in biomedicine and life science. This work would provide a new strategy for designing anhydrous functional biomaterials at room temperature by using rigid biomacromolecules. STATEMENT OF SIGNIFICANCE: At room temperature, solid-state biomaterials with photoregulated crystal⇄isotropic liquid phase transition property are attractive functional materials in life science, considering the body temperature and living environment temperature of human beings. Although several kinds of anhydrous materials achieved isothermal photoresponsive phase transitions, the photoregulated phase transition of anhydrous biomacromolecules based materials has not been achieved at room temperature, due to the high rigidity of these biomolecules. In this work, by delicate molecule design on ammonium surfactants, we synthesized two kinds of anhydrous DNA-surfactants ionic crystals. These DNA materials show fast photoliquefaction under UV light and self-assembly after ceasing light, which affords excellent self-healing biomaterials. This work would provide a new strategy for designing anhydrous photoresponsive biomaterials by using rigid biomacromolecules.

Reversibly Photo-Modulating Mechanical Stiffness and Toughness of Bioengineered Protein Fibers

Light-responsive materials have been extensively studied due to the attractive possibility of manipulating their properties with high spatiotemporal control in a non-invasive fashion. This stimulated the development of a series of photo-deformable smart devices. However, it remained a challenge to reversibly modulate the stiffness and toughness of bulk materials. Here, we present bioengineered protein fibers and their optomechanical manipulation by employing electrostatic interactions between supercharged polypeptides (SUPs) and an azobenzene (Azo)-based surfactant. Photo-isomerization of the Azo moiety from the E- to Z-form reversibly triggered the modulation of tensile strength, stiffness, and toughness of the bulk protein fiber. Specifically, the photo-induced rearrangement into the Z-form of Azo possibly strengthened cation-π interactions within the fiber material, resulting in an around twofold increase in the fiber's mechanical performance. The outstanding mechanical and responsive properties open a path towards the development of SUP-Azo fibers as smart stimuli-responsive mechano-biomaterials.

DNA thermotropic liquid crystals controlled by positively charged catanionic bilayer vesicles

We report DNA thermotropic liquid crystal (TLC) formation by positively charged catanionic surfactant bilayer vesicles. The properties of DNA TLCs were found to be manipulated by both the chemical structures of cationic and anionic surfactants and the DNA amount. Positively charged catanionic bilayer vesicles bond to negative DNA sites resulting in the transition from vesicles to long range ordered lamellar crystals of DNA-catanionic surfactants, as confirmed by cryo- and freeze-fracture (FF) TEM observations and small-angle X-ray scattering (SAXS) measurements.

Photoregulation between small DNAs and reversible photochromic molecules

Oligonucleotides are widely used biological materials in the fields of biomedicine, nanotechnology, and materials science. Due to the demands for the photoregulation of DNA activities, scientists are placing more and more research interest in the interactions between reversible photochromic molecules and DNAs. Photochromic molecules can work as switches for regulating the DNAs' behavior under light irradiation; meanwhile, DNAs also exert influence over the photochromic molecules. The photochromic molecules can be attached to DNAs either by covalent bonds or by noncovalent forces, which results in different regulative functions. Azobenzenes, spiropyrans, diarylethenes, and stilbene-like compounds are important photochromic molecules working as photoswitches. By summarizing their interactions with oligonucleotides, this review intends to facilitate the relevant research on oligonucleotides/photochromic molecules in the biological and medicinal fields and in materials science.

Ionic-surfactants-based thermotropic liquid crystals

Ionic surfactants can be combined with various functional groups through electrostatic interaction, resulting in a series of thermotropic liquid crystals (TLCs).

Biological Tissues as Active Nematic Liquid Crystals

Live tissues can self-organize and be described as active materials composed of cells that generate active stresses through continuous injection of energy. In vitro reconstituted molecular networks, as well as single-cell cytoskeletons show that their filamentous structures can portray nematic liquid crystalline properties and can promote nonequilibrium processes induced by active processes at the microscale. The appearance of collective patterns, the formation of topological singularities, and spontaneous phase transition within the cell cytoskeleton are emergent properties that drive cellular functions. More integrated systems such as tissues have cells that can be seen as coarse-grained active nematic particles and their interaction can dictate many important tissue processes such as epithelial cell extrusion and migration as observed in vitro and in vivo. Here, a brief introduction to the concept of active nematics is provided, and the main focus is on the use of this framework in the systematic study of predominantly 2D tissue architectures and dynamics in vitro. In addition how the nematic state is important in tissue behavior, such as epithelial expansion, tissue homeostasis, and the atherosclerosis disease state, is discussed. Finally, how the nematic organization of cells can be controlled in vitro for tissue engineering purposes is briefly discussed.

DNA Interaction with Head-to-Tail Associates of Cationic Surfactants Prevents Formation of Compact Particles

Cationic azobenzene-containing surfactants are capable of condensing DNA in solution with formation of nanosized particles that can be employed in gene delivery. The ratio of surfactant/DNA concentration and solution ionic strength determines the result of DNA-surfactant interaction: Complexes with a micelle-like surfactant associates on DNA, which induces DNA shrinkage, DNA precipitation or DNA condensation with the emergence of nanosized particles. UV and fluorescence spectroscopy, low gradient viscometry and flow birefringence methods were employed to investigate DNA-surfactant and surfactant-surfactant interaction at different NaCl concentrations, [NaCl]. It was observed that [NaCl] (or the Debye screening radius) determines the surfactant-surfactant interaction in solutions without DNA. Monomers, micelles and non-micellar associates of azobenzene-containing surfactants with head-to-tail orientation of molecules were distinguished due to the features of their absorption spectra. The novel data enabled us to conclude that exactly the type of associates (together with the concentration of components) determines the result of DNA-surfactant interaction. Predomination of head-to-tail associates at 0.01 M < [NaCl] < 0.5 M induces DNA aggregation and in some cases DNA precipitation. High NaCl concentration (higher than 0.8 M) prevents electrostatic attraction of surfactants to DNA phosphates for complex formation. DAPI dye luminescence in solutions with DNA-surfactant complexes shows that surfactant tails overlap the DNA minor groove. The addition of di- and trivalent metal ions before and after the surfactant binding to DNA indicate that the bound surfactant molecules are located on DNA in islets.

Ultraviolet light-, temperature- and pH-responsive fluorescent sensors based on cellulose nanocrystals

Intelligent CNC-g-P(AzoC₆MA-co-DMAEMA) fluorescent nanosensors present ultraviolet light-, temperature- and pH-responsive properties.

Self-aggregation of water-dispersible nanocollagen helices

The self-aggregation of water-dispersible native collagen nanofibrils has been investigated to generate hierarchical networks with structural variation from helicity to layering.