Energy Device Applications of Synthesized 1D Polymer Nanomaterials

Metal-organic framework-derived metal oxides for resistive gas sensing: a review

Gas sensors with exceptional sensitivity and selectivity are vital in the real-time surveillance of noxious and harmful gases. Despite this, traditional gas sensing materials still face a number of challenges, such as poor selectivity, insufficient detection limits, and short lifespan. Metal oxides, which are derived from metal-organic framework materials (MOFs), have been widely used in the field of gas sensors because they have a high surface area and large pore volume. Incorporating metal oxides derived from MOFs into gas sensors can improve their sensitivity and selectivity, thus opening up new possibilities for the development of innovative, high-performance gas sensors. This article examines the gas sensing process of metal oxide semiconductors (MOS), evaluates the advances made in the research of different structures of MOF-derived metal oxides in resistive gas sensors, and provides information on their potential applications and future advancements.

Surfactant-Tunable Nanoparticle Assembly via a Template-Directed Strategy

Nanoparticle (NP) self-assembly from suspension evaporation has been a topic of interest in recent times to fabricate a solid-state structure with diverse functions. We present a simple and facile evaporation-induced strategy for the formation of NP arrays on a flat substrate utilizing a template-directed sandwich system. The lithographic features assist the assembly of the typical nanoparticles (NPs), including SiO₂, QDs@PS FMs, and QDs, on the top into circle, stripe, triangle, or square geometries with a fixed width of 2 μm. Additionally, an anionic surfactant, sodium dodecyl sulfonate (SDS), is incorporated into a negatively charged, hydrophilic SiO₂ dispersion to govern the aggregation and self-assembly of NPs, fine tuning the morphologies of the residual structures on the substrate. SDS is attributed to modify the nature of SiO₂ NPs to be hydrophobic, increase the hydrophobic attraction, dominating particle-particle and particle-interface interactions, and strengthen the particle-particle repulsive electrostatic force that results in the reduction of SiO₂ NPs trapped in the separated colloidal suspension drop. Thus, using the SDS surfactant with the concentration ranging from 0 to 1 wt %, the obtained well-ordered SiO₂ NP pattern packing on the substrate varies from six layers to one layer.

Rational Design of Advanced Triboelectric Materials for Energy Harvesting and Emerging Applications

The properties of materials play a significant role in triboelectric nanogenerators (TENGs). Advanced triboelectric materials for TENGs have attracted tremendous attention because of their superior advantages (e.g., high specific surface area, high porosity, and customizable macrostructure). These advanced materials can be extensively applied in numerous fields, including energy harvester, wearable electronics, filtration, and self-powered sensors. Hence, designing triboelectric materials as advanced functional materials is important for the development of TENGs. Herein, the structural modification methods based on electrospinning to improve the triboelectric properties and the latest research progress in this kind of TENGs are systematically summarized. Preparation methods and design trends of nanofibers, microspheres, hierarchical structures, and doping nanomaterials are highlighted. The factors influencing the formation and properties of triboelectric materials are considered. Furthermore, the latest progress on the applications of TENGs is systematically elaborated. Finally, the challenges in the development of triboelectric materials are discussed, thereby guiding researchers in the large-scale application of TENGs.

Electrospun Nanofibrous Membranes: A Versatile Medium for Waterproof and Breathable Application

Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.

Homochiral Dysprosium Phosphonate Nanowires: Morphology Control and Magnetic Dynamics

Controllable synthesis of uniformly distributed nanowires of coordination polymers with inherent physical functions is highly desirable but challenging. In particular, the combination of chirality and magnetism into nanowires has potential applications in multifunctional materials and spintronic devices. Herein, we report four pairs of enantiopure coordination polymers with formulae S-, R-Dy(cyampH)₃  ⋅ CH₃ COOH ⋅ 2H₂ O (S-1, R-1), S-, R-Dy(cyampH)₃  ⋅ 3H₂ O (S-2, R-2), S-, R-Dy(cyampH)₂ (C₂ H₅ COO) ⋅ 3H₂ O (S-3, R-3) and S-, R-Dy(cyampH)₃  ⋅ 0.5C₂ H₅ COOH ⋅ 2H₂ O (S-4, R-4) [cyampH₂ =S-, R-(1-cyclohexylethyl)aminomethylphosphonic acids], which were obtained depending on the pH of the reaction mixtures and the specific carboxylic acid used as pH regulator. Interestingly, compounds 3 were obtained as superlong nanowires, showing 1D neutral chain structure which contains both phosphonate and propionate anion ligands. While compounds 1, 2 and 4 appeared as block-like crystals, superhelices and nanorods, respectively, and exhibited similar neutral chain structures containing only phosphonate ligand. Slow magnetization relaxation characteristic of single-molecule magnet (SMM) behavior was observed for compounds S-1 and S-3. Theoretical calculations were performed to rationalize the magneto-structural relationships.

Selective Adsorption and Separation of Proteins by Ligand-Modified Nanofiber Fabric

Electrospun polyvinyl alcohol (PVA) nanofiber fabric was modified by Cibacron Blue F3GA (CB) to enhance the affinity of the fabric. Batch experiments were performed to study the nanofiber fabric's bovine hemoglobin (BHb) adsorption capacity at different protein concentrations before and after modification. The maximum BHb adsorption capacity of the modified nanofiber fabric was 686 mg/g, which was much larger than the 58 mg/g of the original fabric. After that, the effect of feed concentration and permeation rate on the dynamic adsorption behaviors for BHb of the nanofiber fabric was investigated. The pH impact on BHb and bovine serum albumin (BSA) adsorption was examined by static adsorption experiments of single protein solutions. The selective separation experiments of the BHb-BSA binary solution were carried out at the optimal pH value, and a high selectivity factor of 5.45 for BHb was achieved. Finally, the reusability of the nanofiber fabric was examined using three adsorption-elution cycle tests. This research demonstrated the potential of the CB-modified PVA nanofiber fabric in protein adsorption and selective separation.

Multifunctional Water Drop Energy Harvesting and Human Motion Sensor Based on Flexible Dual-Mode Nanogenerator Incorporated with Polymer Nanotubes

In the world of increasing energy consumption, nanogenerators have shown great potential for energy harvesting and self-powered portable electronics. Herein, a flexible and dual-mode triboelectric nanogenerator (TENG) combining both vertical contact-separation and single electrical modes has been developed to convert environmental mechanical energy into electricity using highly encapsulated and multifunctional strategies. By introducing the polymer melt wetting technique, polymer nanotubes are fabricated on the surface of the TENG, which provides self-cleaning and hydrophobic features beneficial for water drop energy harvesting using the device. In such mechanical energy harvesting, the maximum output power of 0.025 mW and the open-circuit voltage of 41 V can be achieved. By designing the dimensions of the device, the dual-mode TENG is utilized as a self-powered sensor to detect human body motions such as phalanges' movement of fingers. The fabricated dual-mode TENG promotes the development of energy-harvesting and self-powered human motion sensors for artificial intelligent prosthetics, human kinematics, and human body recovery treatment.