Efficient Photocatalytic Hydrogen Evolution via Band Alignment Tailoring: Controllable Transition from Type-I to Type-II

A tungsten phosphide cocatalyst enhanced bismuth tungstate photoanode with the robust built-in electric field towards highly efficient photoelectrochemical water splitting

The use of low-cost and effective cocatalyst is a potential strategy to optimize the effectiveness of photoelectrochemical (PEC) water splitting. In this study, tungsten phosphide (WP) is introduced as a remarkably active cocatalyst to enhance the PEC efficiency of a Bi2WO6 photoanode. The onset potential of Bi2WO6/WP demonstrates a negative shift, while the photocurrent density demonstrates a significant 5.5-fold increase compared to that of unmodified Bi2WO6 at 1.23 VRHE (reversible hydrogen electrode). The loading of WP cocatalyst facilitates the rapid transfer of holes, increasing the range of visible light absorption, the water adsorption ability as well as promoting the separation of photogenerated electrons and holes via the built-in electric field between Bi2WO6 and WP. This study proposes a strategy to hinder the recombination of electron-hole pairs by using WP cocatalyst as a hole capture agent, improve the photoelectric conversion efficiency, and enhance the overall photoelectrochemical properties of Bi2WO6 photoanode.

Tailoring Advanced CdS Anisotropy-Driven Charge Spatial Vectorial Separation and Migration via In Situ Dual Co-Catalyst Synergistic Layout

Tailoring advanced anisotropy-driven efficient separation and migration of photogenerated carriers is a pivotal stride toward enhancing photocatalytic activity. Here, CdS-MoS2 binary photocatalysts are tailored into a dumbbell shape by leveraging the rod-shaped morphology of CdS and employing an in situ tip-induction strategy. To further enhance the photocatalytic activity, an in situ photo-deposition strategy is incorporated to cultivate MnOx particles on the dumbbell-shaped CdS-MoS2 . The in situ deposition of MnOx effectively isolated the oxidatively active sites on the CdS surface, emphasizing the reductively active crystalline face of CdS, specifically the (002) face. Benefiting from its robust activity as a reduction active site, MoS2 adeptly captures photogenerated electrons, facilitating the reduction of H+ to produce hydrogen. The anisotropically driven separation of CdS photogenerated carriers markedly mitigates the Coulomb force or binding force of the photogenerated electrons, thus promoting a smoother migration toward the active site for photocatalytic hydrogen evolution. The hydrogen evolution rate of 35MnOx -CdS-MoS2 -3 surpasses that of CdS by nearly an order of magnitude, achieving a quantum efficiency of 22.30% at 450 nm. Under simulated solar irradiation, it attains a rate of 42.86 mmol g-1 h-1 . This work imparts valuable insights for the design of dual co-catalysts, anisotropy-driven spatial vectorial charge separation and migration, and the analysis of migration pathways of photogenerated carriers.

Plasmonic Metal Mediated Charge Transfer in Stacked Core-Shell Semiconductor Heterojunction for Significantly Enhanced CO2 Photoreduction

Construction of core-shell semiconductor heterojunctions and plasmonic metal/semiconductor heterostructures represents two promising routes to improved light harvesting and promoted charge separation, but their photocatalytic activities are respectively limited by sluggish consumption of charge carriers confined in the cores, and contradictory migration directions of plasmon-induced hot electrons and semiconductor-generated electrons. Herein, a semiconductor/metal/semiconductor stacked core-shell design is demonstrated to overcome these limitations and significantly boost the photoactivity in CO₂  reduction. In this smart design, sandwiched Au serves as a "stone", which "kills two birds" by inducing localized surface plasmon resonance for hot electron generation and mediating unidirectional transmission of conduction band electrons and hot electrons from TiO₂  core to MoS₂  shell. Meanwhile, upward band bending of TiO₂  drives core-to-shell migration of holes through TiO₂ -MoS₂  interface. The co-existence of TiO₂  → Au → MoS₂  electron flow and TiO₂  → MoS₂  hole flow contributes to spatial charge separation on different locations of MoS₂  outer layer for overall redox reactions. Additionally, reduction potential of photoelectrons participating in the CO₂  reduction is elaborately adjusted by tuning the thickness of MoS₂  shell, and thus the product selectivity is delicately regulated. This work provides fresh hints for rationally controlling the charge transfer pathways toward high-efficiency CO₂  photoreduction.

Modifying SnS2 With Carbon Quantum Dots to Improve Photocatalytic Performance for Cr(VI) Reduction

The photoreduction for hazardous Cr(VI) in industrial wastewater has been considered a "green" approach with low-cost and easy-to-go operation. SnS₂ is a promising narrow bandgap photocatalyst, but its low charge carrier separation efficiency should be solved first. In this work, N-doped carbon quantum dots (CQDs) were prepared and loaded onto SnS₂ nanoparticles via an in situ method. The resulting composite samples (NC@SnS₂) were characterized, and their photocatalytic performance was discussed. SnS₂ nanoparticles were obtained as hexagonal ones with a bandgap of 2.19 eV. The optimal doping level for NC@SnS₂ was citric acid: urea:SnS₂ = 1.2 mmol:1.8 mmol:3.0 mmol. It showed an average diameter of 40 nm and improved photocatalytic performance, compared to pure SnS₂, following a pseudo-first-order reaction with a kinetic rate constant of 0.1144 min^-1. Over 97% of Cr(VI) was photo-reduced after 30 min. It was confirmed that modification of SnS₂ with CQDs can not only improve the light-harvesting ability but also stimulate the charge separation, which therefore can enhance the photoreactivity of SnS₂ toward Cr(VI) reduction. The excellent stability of NC@SnS₂ indicates that it is promising to be practically used in industrial wastewater purification.

Amorphous Fe(OH)3 Passivating CeO2 Nanorods: A Noble-Metal-Free Photocatalyst for Water Oxidation

Noble-metal-free composites with good photocatalytic property are of great interest. Here, CeO₂ nanorods composites loaded with amorphous Fe(OH)₃ cocatalyst were designed and prepared via a secondary water bath at 100 °C. The as-synthesized CeO₂ /amorphous Fe(OH)₃ composites exhibited superior light photocatalytic activities compared to pure CeO₂ , especially the sample with a loading time of 60 min. The photocatalytic oxygen generation rate could reach to 357.2 μmol h^-1  g^-1 , and the average apparent quantum yield (AQY) was 24.67 %, which was a 5.5-fold increase compared to the CeO₂ sample. The improvement of photocatalytic performance could be ascribed to three main reasons: First, loading the amorphous Fe(OH)₃ enlarged the specific surface area and passivated the surface of the pristine CeO₂ . Second, the amorphous Fe(OH)₃ ,which acted as a cocatalyst, provided many active sites, and reduced the reaction activation energy. Thirdly, the maximum interface with intimate contact between CeO₂ and amorphous Fe(OH)₃ cocatalyst accelerated the photogenerated charge separation efficiency and thus improved the photocatalytic performance of CeO₂ in photocatalytic water oxidation.

Enhanced effect of CdS on amorphous Mo15S19 for photocatalytic hydrogen evolution

Amorphous Mo₁₅S₁₉ loaded onto the surface of CdS improves the separation efficiency of photogenerated carriers, which reduces the recombination rate of photogenerated electrons and holes.

Effect of Rh valence state and doping concentration on the structure and photocatalytic H2 evolution in (Nb,Rh) codoped TiO2 nanorods

The simultaneous realization of visible light response and high photocatalytic activity remains a challenging task for TiO2 despite extensive research. Herein, (Nb,Rh) codoping is adopted to extend the absorption band of anatase TiO2 into the visible-light region. Meanwhile, the dependence of the electronic structure, visible-light absorption, and photocatalytic performance on the dopant ratio as well as doping concentration is studied. Open shell t2g5 Rh(iv) and closed shell t2g6 Rh(iii) coexist in Rh-doped TiO2, and the codoped Nb promotes a change in valence state from Rh(iv) to Rh(iii). Rh(iii) is the main active species in charge of the excellent photocatalytic performance, while Rh(iv) doping introduces electron/hole recombination centres. However, surprisingly, a trace of Rh(iv)-doping contributes to a decrease in electron transfer resistance and an increase in donor density, which help to improve photocatalytic performance. By virtue of the controlled content of Rh(iii) and Rh(iv), Ti1-2xNbxRhxO2 exhibits a high hydrogen evolution rate of ∼9000 μmol g-1 h-1 in methanol solution, along with a remarkable photocurrent density of ∼9 μA cm-2 under visible-light irradiation, which are about 170 and 30 times higher than those of pristine TiO2 nanorods, respectively.

Photocatalytic and Photoelectrochemical Systems: Similarities and Differences

Photocatalytic and photoelectrochemical processes are two key systems in harvesting sunlight for energy and environmental applications. As both systems are employing photoactive semiconductors as the major active component, strategies have been formulated to improve the properties of the semiconductors for better performances. However, requirements to yield excellent performances are different in these two distinctive systems. Although there are universal strategies applicable to improve the performance of photoactive semiconductors, similarities and differences exist when the semiconductors are to be used differently. Here, considerations on selected typical factors governing the performances in photocatalytic and photoelectrochemical systems, even though the same type of semiconductor is used, are provided. Understanding of the underlying mechanisms in relation to their photoactivities is of fundamental importance for rational design of high-performing photoactive materials, which may serve as a general guideline for the fabrication of good photocatalysts or photoelectrodes toward sustainable solar fuel generation.

Two-dimensional layered Janus-In2SeTe/C2N van der Waals heterostructures for photocatalysis and photovoltaics: first-principles calculations

Through DFT calculations, Janus-In₂SeTe/C₂N heterostructures are found to have great potential applications in the fields of clean and sustainable energy.

Remarkable Improvement in Photocatalytic Performance for Tannery Wastewater Processing via SnS2 Modified with N-Doped Carbon Quantum Dots: Synthesis, Characterization, and 4-Nitrophenol-Aided Cr(VI) Photoreduction

Photocatalytic pathways are proved crucial for the sustainable production of chemicals and fuels required for a pollution-free planet. Electron-hole recombination is a critical problem that has, so far, limited the efficiency of the most promising photocatalytic materials. Here, the efficacy of the 0D N doped carbon quantum dots (N-CQDs) is demonstrated in accelerating the charge separation and transfer and thereby boosting the activity of a narrow-bandgap SnS₂ photocatalytic system. N-CQDs are in situ loaded onto SnS₂ nanosheets in forming N-CQDs/SnS₂ composite via an electrostatic interaction under hydrothermal conditions. Cr(VI) photoreduction rate of N-CQDs/SnS₂ is highly enhanced by engineering the loading contents of N-CQDs, in which the optimal N-CQDs/SnS₂ with 40 mol% N-CQDs exhibits a remarkable Cr(VI) photoreduction rate of 0.148 min^-1 , about 5-time and 148-time higher than that of SnS₂ and N-CQDs, respectively. Examining the photoexcited charges via zeta potential, X-ray photoelectron spectroscopy (XPS), surface photovoltage, and electrochemical impedance spectra indicate that the improved Cr(VI) photodegradation rate is linked to the strong electrostatic attraction between N-CQDs and SnS₂ nanosheets in composite, which favors efficient carrier utilization. To further boost the carrier utilization, 4-nitrophenol is introduced in this photocatalytic system and the efficiency of Cr(VI) photoreduction is further promoted.

Tailoring the Porosity in Iron Phosphosulfide Nanosheets to Improve the Performance of Photocatalytic Hydrogen Evolution

Metal sulfide photocatalysts are typically required during water splitting to produce hydrogen. However, the rapid recombination of photogenerated electron-hole pairs in these highly unstable photocatalysts has restricted hydrogen production to small-scale batch reactions. In this work, porous transition-metal thiophosphites were used to enable continuous long-term hydrogen production through photocatalysis. A wide bandgap (2.04 eV) was essential for generating hydrogen at a rate of 305.6 μmol h^-1  g^-1 , 180 % faster than nonporous FePS₃ nanosheets. More importantly, the high in-plane stiffness of these approximately 7 nm thick porous FePS₃ nanosheets ensured structural stability during 56 h of continuous photocatalysis reactions. The reaction results with D₂ O instead of H₂ O indicated that hydrogen mainly came from H₂ O. Furthermore, a sacrificial reagent (triethylamine) was photodegraded into diethylamine and acetaldehyde through a monoelectronic oxidation process, as indicated by HPLC and LC-MS. This synthesis strategy reported for FePS₃ porous nanosheets paves a new pathway for designing other dianion-based inorganic nanocrystals for hydrogen energy applications.

SnS2 Nanosheets/H-TiO2 Nanotube Arrays as a Type II Heterojunctioned Photoanode for Photoelectrochemical Water Splitting

Improving the separation efficiency of photogenerated electron-hole pairs and the conductivity of electrons to photoanode substrates are critical to achieve high-performance photoelectrochemical (PEC) water splitting. Here, a SnS₂ /H-TiO₂ /Ti heterojunction photoanode was fabricated with SnS₂ nanosheets vertically grown on hydrogen-treated TiO₂ (H-TiO₂ ) nanotube arrays on a Ti substrate. It showed a significantly enhanced photocurrent of 4.0 mA cm^-2 at 1.4 V (vs. reversible hydrogen electrode) under AM 1.5 G illumination, 70 times higher than that of SnS₂ /TiO₂ /Ti. Kelvin probe force microscopy measurements indicated that photogenerated electrons could be easily transported through the SnS₂ /H-TiO₂ interface but not through the SnS₂ /TiO₂ interface. Through hydrogen treatment, defects were created in H-TiO₂ nanotubes to convert type I junctions to type II with SnS₂ nanosheets. As a result, a high efficiency of electron-hole separation at the SnS₂ /H-TiO₂ interface and a high electron conductivity in H-TiO₂ nanotubes were achieved and improved PEC performance. These findings show an effective route towards high-performance photoelectrodes for water splitting.

Enhanced visible light absorption performance of SnS2 and SnSe2 via surface charge transfer doping

The layered two-dimensional (2D) SnS₂ and SnSe₂ have received intensive attention due to their sizable band gaps and potential properties. However, it has been shown that the visible light absorption of SnS₂ and SnSe₂ are restricted as photocatalysts and light-harvesting material absorbers for water splitting and high-performance optoelectronic devices. Herein, to enhance the visible light absorption performance of SnS₂ and SnSe₂, we performed a systematic investigation on tuning the electronic and optical properties of monolayers SnS₂ and SnSe₂ via surface charge transfer doping (SCTD) with the adsorption of molybdenum trioxide (MoO₃) and potassium (K) as surface dopants based on density functional theory. Our calculations reveal that MoO₃ molecules and K atoms can draw/donate electrons from/to SnS₂ and SnSe₂ as acceptors and donors, respectively. The adsorption of MoO₃ molecules introduces a new flat impurity state in the gap of the monolayers SnS₂/SnSe₂, and the Fermi level moves correspondingly to the top of valence band, resulting in a p-type doping of the monolayer SnS₂/SnSe₂. With the adsorption of K atoms, the electrons can transfer from K atoms to the monolayer of SnS₂ and SnSe₂, making K an effective electron-donating dopant. Meanwhile, the bandgaps of monolayers SnS₂ and SnSe₂ decrease after the MoO₃ and K doping, which leads to the appearance of appreciable new absorption peaks at around ∼650/480 and ∼600/680 nm, respectively, and yielding an enhanced visible light absorption of SnS₂ and SnSe₂. Our results unveil that SCTD is an effective way to improve the photocatalytic and light-harvesting performance of SnS₂ and SnSe₂, broadening their applications in splitting water and degrading environmental pollutants under sunlight irradiation.

Strain-Tunable Electronic Properties and Band Alignments in GaTe/C2N Heterostructure: a First-Principles Calculation

Recently, GaTe and C₂N monolayers have been successfully synthesized and show fascinating electronic and optical properties. Such hybrid of GaTe with C₂N may induce new novel physical properties. In this work, we perform ab initio simulations on the structural, electronic, and optical properties of the GaTe/C₂N van der Waals (vdW) heterostructure. Our calculations show that the GaTe/C₂N vdW heterostructure is an indirect-gap semiconductor with type-II band alignment, facilitating an effective separation of photogenerated carriers. Intriguingly, it also presents enhanced visible-UV light absorption compared to its components and can be tailored to be a good photocatalyst for water splitting at certain pH by applying vertical strains. Further, we explore specifically the adsorption and decomposition of water molecules on the surface of C₂N layer in the heterostructure and the subsequent formation of hydrogen, which reveals the mechanism of photocatalytic hydrogen production on the 2D GaTe/C₂N heterostructure. Moreover, it is found that in-plane biaxial strains can induce indirect-direct-indirect, semiconductor-metal, and type II to type I or type III transitions. These interesting results make the GaTe/C₂N vdW heterostructure a promising candidate for applications in next generation of multifunctional optoelectronic devices.

High-Yield Production of Monolayer FePS3 Quantum Sheets via Chemical Exfoliation for Efficient Photocatalytic Hydrogen Evolution

2D layered transition metal phosphorus trichalcogenides (MPX₃ ) possess higher in-plane stiffness and lower cleavage energies than graphite. This allows them to be exfoliated down to the atomic thickness. However, a rational exfoliation route has to be sought to achieve surface-active and uniform individual layers. Herein, monolayered FePS₃ quantum sheets (QSs) are systematically obtained, whose diameters range from 4-8 nm, through exfoliation of the bulk in hydrazine solution. These QSs exhibit a widened bandgap of 2.18 eV as compared to the bulk (1.60 eV) FePS₃ . Benefitting from the monolayer feature, FePS₃ QSs demonstrate a substantially accelerated photocatalytic H₂ generation rate, which is up to three times higher than the bulk counterpart. This study presents a facile way, for the first time, of producing uniform monolayer FePS₃ QSs and opens up new avenues for designing other low-dimensional materials based on MPX₃ .