Noble Metal-Free Nanocatalysts with Vacancies for Electrochemical Water Splitting

Structural regulation of amorphous molybdenum sulfide by atomic palladium doping for hydrogen evolution

Molybdenum sulfide materials have long been considered as attractive non-precious-metal electrocatalysts for the hydrogen evolution reaction (HER). However, comparing with the crystalline counterpart, amorphous MoSx has been less investigated previously. We here propose to increase the catalytical activity of a-MoSx by raising the reactant concentration at the catalytic interface via a chemical doping approach. The reconstruction of coordination structure of a-MoSx via Pd doping induces the formation of abundant unsaturated S atoms. Moreover, the reactant friendly catalytic interface is constructed through introducing hydrophilic groups to a-MoSx. The doped a-MoSx catalyst exhibits significantly enhanced HER activity in both acid and alkaline media.

Triphasic Ni2P-Ni12P5-Ru with Amorphous Interface Engineering Promoted by Co Nano-Surface for Efficient Water Splitting

This research designs a triphasic Ni2P-Ni12P5-Ru heterostructure with amorphous interface engineering strongly coupled by a cobalt nano-surface (Co@NimPn-Ru) to form a hierarchical 3D interconnected architecture. The Co@NimPn-Ru material promotes unique reactivities toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media. The material delivers an overpotential of 30 mV for HER at 10 mA cm-2 and 320 mV for OER at 50 mA cm-2 in freshwater. The electrolyzer cell derived from Co@NimPn-Ru(+,-) requires a small cell voltage of only 1.43 V in alkaline freshwater or 1.44 V in natural seawater to produce 10 mA cm-2 at a working temperature of 80 °C, along with high performance retention after 76 h. The solar energy-powered electrolyzer system also shows a prospective solar-to-hydrogen conversion efficiency and sufficient durability, confirming its good potential for economic and sustainable hydrogen production. The results are ascribed to the synergistic effects by an exclusive combination of multi-phasic crystalline Ni2P, Ni12P5, and Ru clusters in presence of amorphous phosphate interface attached onto cobalt nano-surface, thereby producing rich exposed active sites with optimized free energy and multi open channels for rapid charge transfer and ion diffusion to promote the reaction kinetics.

Enthralling Anodic Protection by Molybdate on High-Entropy Alloy-Based Electrocatalyst for Sustainable Seawater Oxidation

Efficient and sustainable seawater electrolysis is still limited due to the interference of chloride corrosion at the anode. The designing of suitable electrocatalysts is one of the crucial ways to boost electrocatalytic activity. However, the approach may fall short as achieving high current density often occurs in chlorine evolution reaction (CER)-dominating potential regions. Thereby, apart from developing an OER-active high-entropy alloy-based electrocatalyst, the present study also offers a unique way to protect anode surface under high current density or potential by using MoO4 2- as an effective inhibitor during seawater oxidation. The wide variation of d-band center of high-entropy alloy-based electrocatalyst allows great oxygen evolution reaction (OER) proficiency exhibiting an overpotential of 230 mV at current density of 20 mA cm-2. Besides, the electrocatalyst demonstrates impressive stability over 500 h at high current density of 1 A cm-2 or at a high oxidation potential of 2.0 V versus RHE in the presence of a molybdate inhibitor. Theoretical and experimental studies reveal MoO4 2- electrostatically accumulated at anode surface due to higher adsorption ability, thereby creating a protective layer against chlorides without affecting OER.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

SOx Functionalized NiOOH Nanosheets Embedded in Ni(OH)2 Microarray for High-Efficiency Seawater Oxidation

A nano-micro heterostructure has been established to address the challenges of selectivity, stress, pitting corrosion, and long-term durability of anodes in unpurified seawater. The heterostructure comprised NiOOH nanosheets embedded within a high surface area Ni(OH)2 microarray, and the surface structure is further functionalized with sulfate (SOx). This cation-selective protective layer impedes chloride (Cl-) diffusion and abstracts H from reaction intermediates, leading to enhanced selectivity and corrosion resistance of the anode. The multilevel porosity within the randomly oriented nanosheets and the underlying support provide short diffusion channels for ions and mass migration, ensuring efficient ion transport and long-term structural and mechanical durability of the active sites, even at high current density. Remarkably, the catalyst requires a small input voltage of 400 mV to deliver a current density of 1 A cm-2 and maintains it for over 168 h without noticeable degradation or hypochlorite formation. Spectroscopic analysis and density functional theory (DFT) calculations reveal that the Ni electronic structure in the +3 valence state, its strong structural interaction with the underlying microarray, and the functionality of SOx significantly reduce the required potential for O-O coupling.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Boosting Efficient Alkaline Hydrogen Evolution Reaction of CoFe-Layered Double Hydroxides Nanosheets via Co-Coordination Mechanism of W-Doping and Oxygen Defect Engineering

While surface defects and heteroatom doping exhibit promising potential in augmenting the electrocatalytic hydrogen evolution reaction (HER), their performance remains unable to rival that of the costly Pt-based catalysts. Yet, the concurrent modification of catalysts by integrating both approaches stands as a promising strategy to effectively address the aforementioned limitation. In this work, tungsten dopants are introduced into self-supported CoFe-layered double hydroxides (LDH) on nickel foam using a hydrothermal method, and oxygen vacancies (Ov) are further introduced through calcination. The analysis results demonstrated that tungsten doping reduces the Ov formation energy of CoFeW-LDH. The Ov acted as oxophilic sites, facilitating water adsorption and dissociation, and reducing the barrier for cleaving HO─H bonds from 0.64 to 0.14 eV. Additionally, Ov regulated the electronic structure of CoFeW-LDH to endow optimized hydrogen binding ability on tungsten atoms, thereby accelerating alkaline Volmer and Heyrovsky reaction kinetics. Specifically, the abundance of Ov induced a transition of tungsten from a six-coordinated to highly active four-coordinated structure, which becomes the active site for HER. Consequently, an ultra-low overpotential of 41 mV at 10 mA cm-2 , and a low Tafel slope of 35 mV dec-1 are achieved. These findings offer crucial insights for the design of efficient HER electrocatalysts.

Waste to treasure: Electrocatalytic upcycling of n-valeraldehyde to octane by Zn-Co bimetallic oxide with atomic level cation defect

n-Valeraldehyde is widely used in organic synthesis field as an important intermediate and feedstock, which makes it a significant class of environmental pollutants. In view of the high poisonous and harmful of n-valeraldehyde to human health and ecological environment, it is important to develop green and sustainable technology to reduce the pollution of n-valeraldehyde. In this work, electrocatalytic n-valeraldehyde oxidation using Zn-Co bimetallic oxides was applied to control n-valeraldehyde contamination and highly valuable octane production. To further improve the performance of Zn-Co bimetallic oxides, atomic level Zn vacancies were created across the Zn-Co bimetallic oxides (dx-ZnCo2O4) by post-etching and oxygen vacancy filling methods. Electrochemical experiments results showed that dx-ZnCo2O4 owned a much higher octane yield (1193.4 µmol g-1 h-1) and octane selectivity (octane/butene ≈10). Theoretical calculations demonstrated that the introduction of atomic level Zn vacancies in Zn-Co bimetallic oxide changed the electronic distribution around O, Co and Zn atoms, resulted in an alteration in n-valeraldehyde adsorption sites from Co to Zn, reduced the formation barrier of key intermediate *C4H9 and facilitated the transfer of n-valeraldehyde to octane. This study provides a new idea for the development of high-performance electrocatalysts for controlling n-valeraldehyde pollution.

Constructing of CoP-Nb2O5 p-n heterojunction with built-in electric field to accelerate the charge migration in electrocatalytic hydrogen evolution

Studying interfacial charge transfer is of great significance for the preparation of electrocatalysts with high activity for the hydrogen evolution reaction (HER). Particularly, exploring the in-depth catalytic mechanisms and facile fabrication methods of narrow bandgap metal phosphides remains worthwhile. This work successfully combined catalytically inert n-type Nb2O5 with p-type CoP to prepare a p-n heterojunction (CoP-Nb2O5). The self-supporting heterojunction was fabricated by gas-phase phosphorization of the Co(OH)2-Nb2O5 precursor obtained through hydrothermal-electrodeposition strategy. By analyzing the electronic and band structures of CoP and Nb2O5, it was found that there exists a built-in electric field (BEF) in the heterojunction. This BEF can modulate the electronic structure of CoP at the interface, enhance its intrinsic activity and accelerate charge migration. The subsequent experimental results also demonstrate that Nb2O5 can significantly enhance the activity and stability of CoP. Our findings can serve as a novel perspective on the application of p-n heterojunction in the field of energy storage and conversion.

Intrabasal Plane Defect Formation in NiFe Layered Double Hydroxides Enabling Efficient Electrochemical Water Oxidation

Defect engineering has proven to be one of the most effective approaches for the design of high-performance electrocatalysts. Current methods to create defects typically follow a top-down strategy, cutting down the pristine materials into fragmented pieces with surface defects yet also heavily destroying the framework of materials that imposes restrictions on the further improvements in catalytic activity. Herein, we describe a bottom-up strategy to prepare free-standing NiFe layered double hydroxide (LDH) nanoplatelets with abundant internal defects by controlling their growth behavior in acidic conditions. Our best-performing nanoplatelets exhibited the lowest overpotential of 241 mV and the lowest Tafel slope of 43 mV/dec for the oxygen evolution reaction (OER) process, superior to the pristine LDHs and other reference cation-defective LDHs obtained by traditional etching methods. Using both material characterization and density functional theory (DFT) simulation has enabled us to develop relationships between the structure and electrochemical properties of these catalysts, suggesting that the enhanced electrocatalytic activity of nanoplatelets mainly results from their defect-abundant structure and stable layered framework with enhanced exposure of the (001) surface.

A low-cost and efficient route for large-scale synthesis of NiCoSx nanosheets with abundant sulfur vacancies towards quasi-industrial electrocatalytic oxygen evolution

Transition-metal sulfides (TMS) have piqued a great deal of interest due to their unprecious nature and high intrinsic catalytic activity for water splitting. In this work, a low-cost and efficient route was developed, which included electrodeposition to prepare Ni-Co layered double hydroxide (NiCo-LDH) followed by ion exchange to form nickel cobalt sulfide (NiCoSx). Electrochemical reduction was used to modulate sulfur vacancies in order to produce sulfur vacancies-rich NiCoSx with nanosheet arrays on -three-dimensional nickel foam (NiCoSx-0.4/NF) with a large area of more than 250 cm2. Combining data from experiments and density functional theoretical (DFT) calculations reveals that engineered sulfur vacancies change the electronic structure, electron transfer property, and surface electron density of NiCoSx, significantly improving the free energy of water adsorption and boosting electrocatalytic activity. The developed NiCoSx-0.4/NF has long-term stability of more than 300 h at 500 mA cm-2 in 1 M KOH at ambient temperature and only needs a 289 mV overpotential at 100 mA cm-2. Remarkably, the synthesized electrocatalyst rich in sulfur vacancies, exhibits exceptional performance with a high current density of up to 1.9 A cm-2 and 1 A cm-2 in 6 M KOH and leads to overpotentials of 286 mV at 80 °C and 358 mV at 60 °C, respectively. The catalyst's practicability under quasi-industrial conditions (60 °C, 6 M KOH) is further demonstrated by its long-term stability for 220 h with only a 3.9 % potential increase at 500 mA cm-2.

Intermediates Regulation via Electron-Deficient Cu Sites for Selective Nitrate-to-Ammonia Electroreduction

Ammonia (NH3 ), known as one of the fundamental raw materials for manufacturing commodities such as chemical fertilizers, dyes, ammunitions, pharmaceuticals, and textiles, exhibits a high hydrogen storage capacity of ≈17.75%. Electrochemical nitrate reduction (NO3 RR) to valuable ammonia at ambient conditions is a promising strategy to facilitate the artificial nitrogen cycle. Herein, copper-doped cobalt selenide nanosheets with selenium vacancies are reported as a robust and highly efficient electrocatalyst for the reduction of nitrate to ammonia, exhibiting a maximum Faradaic efficiency of ≈93.5% and an ammonia yield rate of 2360 µg h-1 cm-2 at -0.60 V versus reversible hydrogen electrode. The in situ spectroscopical and theoretical study demonstrates that the incorporation of Cu dopants and Se vacancies into cobalt selenide efficiently enhances the electron transfer from Cu to Co atoms via the bridging Se atoms, forming the electron-deficient structure at Cu sites to accelerate NO3 - dissociation and stabilize the *NO2 intermediates, eventually achieving selective catalysis in the entire NO3 RR process to produce ammonia efficiently.

Recent Advances in Co-Based Electrocatalysts for Hydrogen Evolution Reaction

Water splitting is a promising technique in the sustainable "green hydrogen" generation to meet energy demands of modern society. Its industrial application is heavily dependent on the development of novel catalysts with high performance and low cost for hydrogen evolution reaction (HER). As a typical non-precious metal, cobalt-based catalysts have gained tremendous attention in recent years and shown a great prospect of commercialization. However, the complexity of the composition and structure of newly-developed Co-based catalysts make it urgent to comprehensively retrospect and summarize their advance and design strategies. Hence, in this review, the reaction mechanism of HER is first introduced and the possible role of the Co component during electrocatalysis is discussed. Then, various design strategies that could effectively enhance the intrinsic activity are summarized, including surface vacancy engineering, heteroatom doping, phase engineering, facet regulation, heterostructure construction, and the support effect. The recent progress of the advanced Co-based HER electrocatalysts is discussed, emphasizing that the application of the above design strategies can significantly improve performance by regulating the electronic structure and optimizing the binding energy to the crucial intermediates. At last, the prospects and challenges of Co-based catalysts are shown according to the viewpoint from fundamental explorations to industrial applications.

Rational Design of a Copper Cobalt Sulfide/Tungsten Disulfide Heterostructure for Excellent Overall Water Splitting

Integrating different components into a heterostructure is a novel approach that increases the number of active centers to enhance the catalytic activities of a catalyst. This study uses an efficient, facile hydrothermal strategy to synthesize a unique heterostructure of copper cobalt sulfide and tungsten disulfide (CuCo2S4-WS2) nanowires on a Ni foam (NF) substrate. The nanowire arrays (CuCo2S4-WS2/NF) with multiple integrated active sites exhibit small overpotentials of 202 (299) and 240 (320) mV for HER and OER at 20 (50) mA cm-2 and 1.54 V (10 mA cm-2) for an electrolyzer in 1.0 M KOH, surpassing commercial and previously reported catalysts. A solar electrolyzer composed of CuCo2S4-WS2 bifunctional electrodes also produced significant amounts of hydrogen through a water splitting process. The remarkable performance is accredited to the extended electroactive surface area, reasonable density of states near the Fermi level, optimal adsorption free energies, and good charge transfer ability, further validating the excellent dual function of CuCo2S4-WS2/NF in electrochemical water splitting.

In Situ Charge Modification within Prussian Blue Analogue Nanocubes by Plasma for Oxygen Evolution Catalysis

A targeted defect-induced strategy of metal sites in a porous framework is an efficient avenue to improve the performance of a catalyst. However, achieving such an activation without destroying the ordered framework is a major challenge. Herein, a dielectric barrier discharge plasma can etch the Fe(CN)₆ group of the NiFe Prussian blue analogue framework in situ through reactive oxygen species generated in the air. Density functional theory calculations prove that the changed local electronic structure and coordination environment of Fe sites can significantly improve oxygen evolution reaction catalytic properties. The modified NiFe Prussian blue analogue is featured for only 316 mV at a high current density (100 mA cm^-2), which is comparable to that of commercial alkaline catalysts. In a solar cell-driven alkaline electrolyzer, the overall electrolysis efficiency is up to 64% under real operation conditions. Over 80 h long-time continuous test under 100 mA cm^-2 highlights superior durability. The density functional theory calculations confirm that the formation of OOH* is the rate-determining step over Fe sites, and Fe(CN)₆ vacancy and extra oxygen atoms can introduce charge redistribution to the catalyst surface, which finally enhances the oxygen evolution reaction catalytic properties by reducing the overpotential by 0.10 V. Both experimental and theoretical results suggest that plasma treatment strategy is useful for modifying the skeletal material nondestructively at room temperature, which opens up a broad prospect in the field of catalyst production.

In Situ Filling of the Oxygen Vacancies with Dual Heteroatoms in Co3O4 for Efficient Overall Water Splitting

Electrocatalytic water splitting is a crucial area in sustainable energy development, and the development of highly efficient bifunctional catalysts that exhibit activity toward both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of paramount importance. Co₃O₄ is a promising candidate catalyst, owing to the variable valence of Co, which can be exploited to enhance the bifunctional catalytic activity of HER and OER through rational adjustments of the electronic structure of Co atoms. In this study, we employed a plasma-etching strategy in combination with an in situ filling of heteroatoms to etch the surface of Co₃O₄, creating abundant oxygen vacancies, while simultaneously filling them with nitrogen and sulfur heteroatoms. The resulting N/S-V_O-Co₃O₄ exhibited favorable bifunctional activity for alkaline electrocatalytic water splitting, with significantly enhanced HER and OER catalytic activity compared to pristine Co₃O₄. In an alkaline overall water-splitting simulated electrolytic cell, N/S-V_O-Co₃O₄ || N/S-V_O-Co₃O₄ showed excellent overall water splitting catalytic activity, comparable to noble metal benchmark catalysts Pt/C || IrO₂, and demonstrated superior long-term catalytic stability. Additionally, the combination of in situ Raman spectroscopy with other ex situ characterizations provided further insight into the reasons behind the enhanced catalyst performance achieved through the in situ incorporation of N and S heteroatoms. This study presents a facile strategy for fabricating highly efficient cobalt-based spinel electrocatalysts incorporated with double heteroatoms for alkaline electrocatalytic monolithic water splitting.

Accurate Capture and Identification of Exosomes: Nanoarchitecture of the MXene Heterostructure/Engineered Lipid Layer

Recently, exosome detection has become an important breakthrough in clinical diagnosis. However, the effective capture and accurate identification of cancer exosomes in a complex biomatrix are still a tough task. Especially, the large size and non-conductivity of exosomes are not conducive to highly sensitive electrochemical or electrochemiluminescence (ECL) detection. Therefore, we have developed a Ti₃C₂T_x-Bi₂S_3-x heterostructure/engineered lipid layer-based nanoarchitecture to overcome the limitations. The engineered lipid layer not only specifically captured and efficiently fused CD63 positive exosomes but also showed excellent antifouling property in the biological matrix. Moreover, the MUC1 aptamer-modified Ti₃C₂T_x-Bi₂S_3-x heterostructure further identified and covered the gastric cancer exosomes that have been trapped in the engineered lipid layer. In the self-luminous Faraday cage-type sensing system, the Ti₃C₂T_x-Bi₂S_3-x heterostructure with sulfur vacancies extended the outer Helmholtz plane and amplified the ECL signal. Therefore, this sensor can be used to detect tumor exosomes in ascites of cancer patients without additional purification. It provides a new pathway to detect exosomes and other large-sized vesicles with high sensitivity.

Engineering cation vacancies in high-entropy layered double hydroxides for boosting the oxygen evolution reaction

High-entropy layered double hydroxides (HE-LDHs) are emerging as promising electrocatalysts towards the OER due to their high-entropy effect and the cocktail effect. However, the catalytic activity and stability of HE-LDHs is, as yet, unsatisfactory. Herein, we designed FeCoNiCuZn LDHs with rich cation vacancies, which need only low overpotentials of 227, 275 and 293 mV to reach 10, 100 and 200 mA cm^-2, respectively, and show almost no decay up to 200 h at 200 mA cm^-2. DFT calculations validate that the cation vacancies can boost the intrinsic activity of HE-LDHs through optimizing the adsorption energy of OER intermediates.

IrO2 Nanoparticle-Decorated Ir-Doped W18O49 Nanowires with High Mass Specific OER Activity for Proton Exchange Membrane Electrolysis

The oxygen evolution reaction (OER) severely limits the efficiency of proton exchange membrane (PEM) electrolyzers due to slow reaction kinetics. IrO₂ is currently a commonly used anode catalyst, but its large-scale application is limited due to its high price and scarce reserves. Herein, we reported a practical strategy to construct an acid OER catalyst where Iridium oxide loading and iridium element bulk doping are realized on the surface and inside of W₁₈O₄₉ nanowires by immersion adsorption, respectively. Specifically, W_0.7Ir_0.3O_y has an overpotential of 278 mV at 10 mA·cm^-2 in 0.1 M HClO₄. The mass activity of 714.10 A·g_Ir^-1 at 1.53 V vs. the reversible hydrogen electrode (RHE) is 80 times that of IrO₂, and it can run stably for 55 h. In the PEM water electrolyzer device, its mass activity reaches 3563.63 A·g_Ir^-1 at the cell voltage of 2.0 V. This improved catalytic performance is attributed to the following aspects: (1) The electron transport between iridium and tungsten effectively improves the electronic structure of the catalyst; (2) the introduction of iridium into W₁₈O₄₉ by means of elemental bulk doping and nanoparticles supporting for the enhanced conductivity and electrochemically active surface area of the catalyst, resulting in extensive exposure of active sites and increased intrinsic activity; and (3) during the OER process, partial iridium elements in the bulk phase are precipitated, and iridium oxide is formed on the surface to maintain stable activity. This work provides a new idea for designing oxygen evolution catalysts with low iridium content for practical application in PEM electrolyzers.

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

Low-dimensional transition metal sulfide-based electrocatalysts for water electrolysis: overview and perspectives

Hydrogen prepared by electrocatalytic decomposition of water ("green hydrogen") has the advantages of high energy density and being clean and pollution-free, which is an important energy carrier to face the problems of the energy crisis and environmental pollution. However, the most used commercial electrocatalysts are based on expensive and scarce precious metals and their alloy materials, which seriously restricts the large-scale industrial application of hydrogen energy. The development of efficient non-precious metal electrocatalysts is the key to achieving the sustainable development of the hydrogen energy industry. Transition metal sulfides (TMS) have become popular non-precious metal electrocatalysts with great application potential due to their large specific surface area, unique electronic structure, and rich regulatory strategies. To further improve their catalytic activities for practical application, many methods have been tried in recent years, including control of morphology and crystal plane, metal/nonmetal doping, vacancy engineering, building of self-supporting electrocatalysts, interface engineering, etc. In this review, we introduce firstly the common types of TMS and their preparation. Additionally, we summarize the recent developments of the many different strategies mentioned above for efficient water electrolysis applications. Furthermore, the rationales behind their enhanced electrochemical performances are discussed. Lastly, the challenges and future perspectives are briefly discussed for TMS-based water dissociation catalysts.

Enhanced Hydrogen Evolution Reaction over Co Nanoparticles Embedded N-Doped Carbon Nanotubes Electrocatalyst with Zn as an Accelerant

The rational design for transition metals-based carbon nano-materials as efficient electrocatalysts still remains a crucial challenge for economical electrochemical hydrogen production. Carbon nanotubes (CNTs) as attractive electrocatalysts are typically activated by non-metal dopant to promote catalytic performance. Metals doping or metal/non-metal co-doping of CNTs, however, are rarely explored. Herein, this work rationally designs bimetal oxide templates of ZnCo₂ O₄ for heterogeneously doping Zn and N into Co nanoparticles embedded carbon nanotubes (Co@Zn-N-CNTs). During the formation of CNTs, Zn atoms volatilize from ZnCo₂ O₄ and in situ dope into the carbon skeleton. In particular, owing to the low electronegativity of Zn, the electrons aptly transfer from Zn to carbon atoms, which generate a high electron density for the carbon layers and offer more preponderant catalytic sites for hydrogen reduction. The Co@Zn-N-CNTs catalyst exhibits enhanced hydrogen evolution reaction activity in 0.5 m H₂ SO₄ electrolyte, with a low onset potential of -20 mV versus RHE at 1 mA cm^-2 , an overpotential of 67 mV at 10 mA cm^-2 , a small Tafel slope of 52.1 mV dec^-1 , and persistent long-term stability. This study provides brand-new insights into the utilization of Zn as electronic regulator and activity promoter toward the design of high-efficiency electrocatalysts.

Vacancy Defects in 2D Transition Metal Dichalcogenide Electrocatalysts: From Aggregated to Atomic Configuration

Vacancy defect engineering has been well leveraged to flexibly shape comprehensive physicochemical properties of diverse catalysts. In particular, growing research effort has been devoted to engineering chalcogen anionic vacancies (S/Se/Te) of 2D transition metal dichalcogenides (2D TMDs) toward the ultimate performance limit of electrocatalytic hydrogen evolution reaction (HER). In spite of remarkable progress achieved in the past decade, systematic and in-depth insights into the state-of-the-art vacancy engineering for 2D-TMDs-based electrocatalysis are still lacking. Herein, this review delivers a full picture of vacancy engineering evolving from aggregated to atomic configurations covering their development background, controllable manufacturing, thorough characterization, and representative HER application. Of particular interest, the deep-seated correlations between specific vacancy regulation routes and resulting catalytic performance improvement are logically clarified in terms of atomic rearrangement, charge redistribution, energy band variation, intermediate adsorption-desorption optimization, and charge/mass transfer facilitation. Beyond that, a broader vision is cast into the cutting-edge research fields of vacancy-engineering-based single-atom catalysis and dynamic structure-performance correlations across catalyst service lifetime. Together with critical discussion on residual challenges and future prospects, this review sheds new light on the rational design of advanced defect catalysts and navigates their broader application in high-efficiency energy conversion and storage fields.

MOF-derived nanoarrays as advanced electrocatalysts for water splitting

Developing efficient, nanostructured electrocatalysts with the desired compositions and structures is of great significance for improving the efficiency of water splitting toward hydrogen production. In this regard, metal-organic framework (MOF) derived nanoarrays have attracted great attention as promising electrocatalysts because of their diverse compositions and adjustable structures. In this review, the recent progress in MOF-derived nanoarrays for electrochemical water splitting is summarized, highlighting the structural design of the MOF-derived nanoarrays and the electrocatalytic performance of the derived composite carbon materials, oxides, hydroxides, sulfides, and phosphides. In particular, the structure-performance relationships of the MOF-derived nanoarrays and the modulation strategies toward enhanced catalytic activity for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are discussed, providing insights into the development of advanced catalysts for the HER and OER. The challenges and prospects in this promising field for future industrial applications are also addressed.

Highly Efficient Electrocatalytic Upgrade of n-Valeraldehyde to Octane over Au SACs-NiMn2 O4 Spinel Synergetic Composites

In this work, electrocatalytic upgrade of n-valeraldehyde to octane with higher activity and selectivity is achieved over Au single-atom catalysts (SACs)-NiMn₂ O₄ spinel synergetic composites. Experiments combined with density functional theory calculation collaboratively demonstrate that Au single-atoms occupy surface Ni²⁺ vacancies of NiMn₂ O₄ , which play a dominant role in n-valeraldehyde selective oxidation. A detailed investigation reveals that the initial n-valeraldehyde molecule preferentially adsorbs on the Mn tetrahedral site of NiMn₂ O₄ spinel synergetic structures, and the subsequent n-valeraldehyde molecule easily adsorbs on the Ni site. Specifically, Au single-atom surficial derivation over spinel lowers the adsorption energy (E_ads ) of the initial n-valeraldehyde molecule, which will facilitate its adsorption on the Mn site of Au SACs-NiMn₂ O₄ . Furthermore, the single-atom Au surficial derivation not only alters the electronic structure of Au SACs-NiMn₂ O₄ but also lower the E_ads of subsequent n-valeraldehyde molecule. Hence, the subsequent n-valeraldehyde molecules prefer adsorption on Au sites rather than Ni sites, and the process of two alkyl radicals originating from Mn-C₄ H₉ and Au-C₄ H₉ dimerization into an octane is accordingly accelerated. This work will provide an avenue for the rational design of SACs and supply a vital mechanism for understanding the electrocatalytic upgrade of n-valeraldehyde to octane.

Superlative photoelectrochemical properties of 3D MgCr-LDH nanoparticles influencing towards photoinduced water splitting reactions

In the present work, we report the synthesis of single system three-dimensional (3D) open porous structure of MgCr-LDH nanoparticles in a substrate-free path by using one-step formamide assisted hydrothermal reaction followed by visible light irradiation for significant photoelectrochemical (PEC) properties that manifest towards photocatalytic H₂ and O₂ production. The as-prepared nanostructured materials were characterized by various physico-chemical characterization techniques. Moreover, this unique synthetic approach produces 3D open porous network structure of MgCr-LDH nanoparticles, which were formed by stacking of numerous 2D nanosheets, for effective light harvestation, easy electronic channelization and unveil superlative PEC properties, including high current density (6.9 mA/cm²), small Tafel slope of 82 mV/decade, smallest arc of the Nyquist plot (59.1 Ω cm⁻²) and photostability of 6000 s for boosting water splitting activity. In addition, such perfectly self-stacked 2D nanosheets in 3D MgCr-LDH possess more surface active defect sites as enriched 50% oxygen vacancy resulting a good contact surface within the structure for effective light absorption along with easy electron and hole separation, which facilitates the adsorption of protons and intermediate for water oxidation. Additionally, the Cr³⁺ as dopant pull up the electrons from water oxidation intermediates, thereby displaying superior photocatalytic H₂ and O₂ production activity of 1315 μmol/h and 579 μmol/h, respectively. Therefore, the open 3D morphological aspects of MgCr-LDH nanoparticles with porous network structure and high surface area possess more surface defect sites for electron channelization and identified as distinct novel features of this kind of materials for triggering significant PEC properties, along with robustly enhance the photocatalytic water splitting performances.

Engineering Sulfur Vacancies in Spinel-Phase Co3S4 for Effective Electrocatalysis of the Oxygen Evolution Reaction

Restricted by the sluggish kinetics of the oxygen evolution reaction (OER), efficient OER catalysis remains a challenge. Here, a facile strategy was proposed to prepare a hollow dodecahedron constructed by vacancy-rich spinel Co₃S₄ nanoparticles in a self-generated H₂S atmosphere of thiourea. The morphology, composition, and electronic structure, especially the sulfur vacancy, of the cobalt sulfides can be regulated by the dose of thiourea. Benefitting from the H₂S atmosphere, the anion exchange process and vacancy introduction can be accomplished simultaneously. The resulting catalyst exhibits excellent catalytic activity for the OER with a low overpotential of 270 mV to reach a current density of 10 mA cm^-2 and a small Tafel slope of 59 mV dec^-1. Combined with various characterizations and electrochemical tests, the as-proposed defect engineering method could delocalize cobalt neighboring electrons and expose more Co²⁺ sites in spinel Co₃S₄, which lowers the charge transfer resistance and facilitates the formation of Co³⁺ active sites during the preactivation process. This work paves a new way for the rational design of vacancy-enriched transition metal-based catalysts toward an efficient OER.

Engineering Multidefects on Cex Si1- x O2- δ Nanocomposites for the Catalytic Ozonation Reaction

Herein, it is shown that by engineering defects on Ce_x Si_{1- x} O_{2- δ} nanocomposites synthesized via flame spray pyrolysis, oxygen vacancies can be created with an increased density of trapped electrons, enhancing the formation of reactive oxygen species (ROSs) and hydroxyl radicals in an ozone-filled environment. Spectroscopic analysis and density functional theory calculations indicate that two-electron oxygen vacancies (O_V ⁰ ) or peroxide species, and their degree of clustering, play a critical role in forming reactive radicals. It is also found that a higher Si content in the binary oxide imposes a high O_V ⁰ ratio and, consequently, higher catalytic activity. Si inclusion in the nanocomposite appears to stabilize the surface oxygen vacancies as well as increase the reactive electron density at these sites. A mechanistic study on effective ROSs generated during catalytic ozonation reveals that the hydroxyl radical is the most effective ROS for organic degradation and is formed primarily through H₂ O₂ generation in the presence of the O_V ⁰ . Examining the binary oxides offers insights on the contribution of oxygen vacancies and their state of charge to catalytic reactions, in this instance for the catalytic ozonation of organic compounds.

Moiré Fringe Method via Scanning Transmission Electron Microscopy

Moiré fringe, originated from the beating of two sets of lattices, is a commonly observed phenomenon in physics, optics, and materials science. Recently, a new method of creating moiré fringe via scanning transmission electron microscopy (STEM) has been developed to image materials' structures at a large field of view. Moreover, this method shows great advantages in studying atomic structures of beam sensitive materials by significantly reduced electron dose. Here, the development of the STEM moiré fringe (STEM-MF) method is reviewed. The authors first introduce the theory of STEM-MF and then discuss the advances of this technique in combination with geometric phase analysis, annular bright field imaging, energy dispersive X-ray spectroscopy, and electron energy loss spectroscopy. Applications of STEM-MF on strain, defects, 2D materials, and beam-sensitive materials are further summarized. Finally, the authors' perspectives on the future directions of STEM-MF are presented.

Microflower-like Co9S8@MoS2 heterostructure as an efficient bifunctional catalyst for overall water splitting

The development of a distinguished and high-performance catalyst for H₂ and O₂ generation is a rational strategy for producing hydrogen fuel via electrochemical water splitting. Herein, a flower-like Co₉S₈@MoS₂ heterostructure with effective bifunctional activity was achieved using a one-pot approach via the hydrothermal treatment of metal-coordinated species followed by pyrolysis under an N₂ atmosphere. The heterostructures exhibited a 3D interconnected network with a large electrochemical active surface area and a junctional complex with hydrogen evolution reaction (HER) catalytic activity of MoS₂ and oxygen evolution reaction (OER) catalytic activity of Co₉S₈, exhibiting low overpotentials of 295 and 103 mV for OER and HER at 10 mA cm⁻² current density, respectively. Additionally, the catalyst-assembled electrolyser provided favourable catalytic activity and strong durability for overall water splitting in 1 M KOH electrolyte. The results of the study highlight the importance of structural engineering for the design and preparation of cost-effective and efficient bifunctional electrocatalysts.

A flower-like Co₉S₈@MoS₂ heterostructure was prepared as efficient bifunctional electrocatalyst for overall water splitting by a sample one-pot approach.

Evolution of Cationic Vacancy Defects: A Motif for Surface Restructuration of OER Precatalyst

Defects have been found to enhance the electrocatalytic performance of NiFe-LDH for oxygen evolution reaction (OER). Nevertheless, their specific configuration and the role played in regulating the surface reconstruction of electrocatalysts remain ambiguous. Herein, cationic vacancy defects are generated via aprotic-solvent-solvation-induced leaking of metal cations from NiFe-LDH nanosheets. DFT calculation and in situ Raman spectroscopic observation both reveal that the as-generated cationic vacancy defects tend to exist as V_M (M=Ni/Fe); under increasing applied voltage, they tend to assume the configuration V_MOH , and eventually transform into V_MOH-H which is the most active yet most difficult to form thermodynamically. Meanwhile, with increasing voltage the surface crystalline Ni(OH)_x in the NiFe-LDH is gradually converted into disordered status; under sufficiently high voltage when oxygen bubbles start to evolve, local NiOOH species become appearing, which is the residual product from the formation of vacancy V_MOH-H . Thus, we demonstrate that the cationic defects evolve along with increasing applied voltage (V_M → V_MOH → V_MOH-H ), and reveal the essential motif for the surface restructuration process of NiFe-LDH (crystalline Ni(OH)_x → disordered Ni(OH)_x → NiOOH). Our work provides insight into defect-induced surface restructuration behaviors of NiFe-LDH as a typical precatalyst for efficient OER electrocatalysis.

Recent Progress on Transition Metal Based Layered Double Hydroxides Tailored for Oxygen Electrode Reactions

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), namely, so-called oxygen electrode reactions, are two fundamental half-cell reactions in the energy storage and conversion devices, e.g., zinc–air batteries and fuel cells. However, the oxygen electrode reactions suffer from sluggish kinetics, large overpotential and complicated reaction paths, and thus require efficient and stable electrocatalysts. Transition-metal-based layered double hydroxides (LDHs) and their derivatives have displayed excellent catalytic performance, suggesting a major contribution to accelerate electrochemical reactions. The rational regulation of electronic structure, defects, and coordination environment of active sites via various functionalized strategies, including tuning the chemical composition, structural architecture, and topotactic transformation process of LDHs precursors, has a great influence on the resulting electrocatalytic behavior. In addition, an in-depth understanding of the structural performance and chemical-composition-performance relationships of LDHs-based electrocatalysts can promote further rational design and optimization of high-performance electrocatalysts. Finally, prospects for the design of efficient and stable LDHs-based materials, for mass-production and large-scale application in practice, are discussed.

Boride-derived oxygen-evolution catalysts

Metal borides/borates have been considered promising as oxygen evolution reaction catalysts; however, to date, there is a dearth of evidence of long-term stability at practical current densities. Here we report a phase composition modulation approach to fabricate effective borides/borates-based catalysts. We find that metal borides in-situ formed metal borates are responsible for their high activity. This knowledge prompts us to synthesize NiFe-Boride, and to use it as a templating precursor to form an active NiFe-Borate catalyst. This boride-derived oxide catalyzes oxygen evolution with an overpotential of 167 mV at 10 mA/cm² in 1 M KOH electrolyte and requires a record-low overpotential of 460 mV to maintain water splitting performance for over 400 h at current density of 1 A/cm². We couple the catalyst with CO reduction in an alkaline membrane electrode assembly electrolyser, reporting stable C₂H₄ electrosynthesis at current density 200 mA/cm² for over 80 h.

Optimization of nickel selenide for hydrogen and oxygen evolution reactions by response surface methodology

In this study, the electrocatalytic activity of Ni-Se electrode synthesized on nickel foam by pulse electrodeposition was optimized through the design of experiments (DOE) approach using the response surface methodology (RSM) for both hydrogen and oxygen evolution reactions. The frequency (f), duty cycle (dc), current density (i), and electrodeposition time (sum of t_ons) were chosen as the parameters of the pulse electrodeposition method. The analyses of variance (ANOVA) were performed on the responses of the designed experiments that included the required overpotential at the current density of 10 mA/cm² for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) (η_10,HER and η_10,OER), active surface area (R_f) and intrinsic electrocatalytic activity (i/R_f). The results indicated that η_10,HER, η_10,OER, and R_f are mainly influenced by duty cycle and electrodeposition time, while i/R_f is affected by frequency and time. The optimized NiSe₂ electrode synthesized under optimal conditions of pulse electrodeposition (low duty cycle and prolonged electrodeposition time) showed the most desirable values for η_10,HER, η_10,OER, and R_f, equal to 44 mV (vs. RHE), 235 mV (vs. RHE) and 14700, respectively. The nanostructured NiSe₂ demonstrated the highest potential in the bifunctional application of OER and HER.

Interface Engineering of Heterogeneous CeO2-CoO Nanofibers with Rich Oxygen Vacancies for Enhanced Electrocatalytic Oxygen Evolution Performance

The development of highly efficient and cheap electrocatalysts for the oxygen evolution reaction (OER) is highly desirable in typical water-splitting electrolyzers to achieve renewable energy production, yet it still remains a huge challenge. Herein, we have presented a simple procedure to construct a new nanofibrous hybrid structure with the interface connecting the surface of CeO₂ and CoO as a high-performance electrocatalyst toward the OER through an electrospinning-calcination-reduction process. The resultant CeO₂-CoO nanofibers exhibit excellent electrocatalytic properties with a small overpotential of 296 mV at 10 mA cm^-2 for the OER, which is superior to many previously reported nonprecious metal-based and commercial RuO₂ catalysts. Furthermore, the prepared CeO₂-CoO nanofibers display remarkable long-term stability, which can be maintained for 130 h with nearly no attenuation of OER activity in an alkaline electrolyte. A combined experimental and theoretical investigation reveals that the excellent OER properties of CeO₂-CoO nanofibers are due to the unique interfacial architecture between CeO₂ and CoO, where abundant oxygen vacancies can be generated due to the incomplete matching of atomic positions of two parts, leading to the formation of many low-coordinated Co sites with high OER catalytic activity. This research provides a practical and promising opportunity for the application of heterostructured nonprecious metal oxide catalysts for high-efficiency electrochemical water oxidation.

In situ formation of grain boundaries on a supported hybrid to boost water oxidation activity of iridium oxide

Coupling electrochemical water splitting with renewable energy sources shows great potential to produce hydrogen fuel. The sluggish kinetics of the oxygen evolution reaction (OER) resulting from the complicated reaction mechanism and the requirement of the noble metal iridium as the anode catalyst are the two key challenges in implementing proton exchange membrane electrolysis. These challenges may be overcome by the nanoscale design and assembly of novel hybrid materials. Grain boundaries (GBs) are a common crystallographic feature that increase in variability and attractiveness as the particle size decreases. However, the effects of GBs on OER activity in supported hybrid IrO₂ catalysts remain unclear. In this study, supported hybrid IrO₂ catalysts containing ultrafine nanoparticles were prepared via the self-assembly of iridium precursors on the β-MnO₂ surface. The GBs induced intriguing features such as abundant coordination-unsaturated iridium sites and surface hydroxylation, resulting in enhanced OER activity. The formation of GBs was strongly dependent on the nature of the support. In addition to the morphology, the crystal structure of the substrate may play an important role in inducing dense nanoparticle growth. The established relationship between GB formation and OER activity provides an opportunity to design more stable and effective IrO₂-based hybrid materials for the OER.

Fe, Ni-codoped W18O49 grown on nickel foam as a bifunctional electrocatalyst for boosted water splitting

Designing cost-effective bifunctional catalysts with high-performance and durability is of great significance for renewable energy systems. Herein, typical Fe, Ni-codoped W₁₈O₄₉/NF was prepared via a simple solvothermal method. The incorporation of Fe ions enhanced the electronic interaction and enlarged the electrochemically active surface area. The increased W⁴⁺ leads to a high proportion of unsaturated W[double bond, length as m-dash]O bonds, thus enhancing the adsorption capacity of water. The valence configuration of nickel (Ni) sites in such dual-cation doping is well adjusted, realizing a high proportion of trivalent Ni ions (Ni³⁺). Due to the orbital interactions, the Fe³⁺/Ni³⁺ ions and OER reaction intermediates exhibit strong orbital overlap. The positions of the valence band and conduction band are well modulated. As a result, the Fe, Ni-codoped W₁₈O₄₉/NF shows improved electrocatalytic activity, and achieves a low decomposition voltage of 1.58 V at 10 mA cm^-2 and retains long-time stability.

Hierarchically Assembled Cobalt Oxynitride Nanorods and N-Doped Carbon Nanofibers for Efficient Bifunctional Oxygen Electrocatalysis with Exceptional Regenerative Efficiency

Oxygen-based electrocatalysis is an integral aspect of a clean and sustainable energy conversion/storage system. The development of economic bifunctional electrocatalysts with high activity and durability during reversible reactions remains a great challenge. The tailored porous structure and separately presented active sites for oxygen reduction and oxygen evolution reactions (ORR and OER) without mutual interference are most crucial for achieving desired bifunctional catalysts. Here, we report a hybrid composed of sheath-core cobalt oxynitride (CoO_x@CoN_y) nanorods grown perpendicularly on N-doped carbon nanofiber (NCNF). The brush-like CoO_x@CoN_y nanorods, composed of metallic Co₄N cores and oxidized surfaces, exhibit excellent OER activity (E = 1.69 V at 10 mA cm^-2) in an alkaline medium. Although pristine NCNF or CoO_x@CoN_y alone had poor catalytic activity in the ORR, the hybrid showed dramatically enhanced ORR performance (E = 0.78 V at -3 mA cm^-2). The experimental results coupled with a density functional theory (DFT) simulation confirmed that the broad surface area of the CoO_x@CoN_y nanorods with an oxidized skin layer boosts the catalytic OER, while the facile adsorption of ORR intermediates and a rapid interfacial charge transfer occur at the interface between the CoO_x@CoN_y nanorods and the electrically conductive NCNF. Furthermore, it was found that the independent catalytic active sites in the CoO_x@CoN_y/NCNF catalyst are continuously regenerated and sustained without mutual interference during the round-trip ORR/OER, affording stable operation of Zn-air batteries.

Vacancies-Engineered M2CO2 MXene as an Efficient Hydrogen Evolution Reaction Electrocatalyst

Vacancy engineering is proposed to effectively modulate the hydrogen evolution reaction (HER) activity of M₂CO₂ MXene. A single C vacancy slightly weakens the H adsorption, while the introduction of a M vacancy or coupled M+C vacancies can greatly enhance the H binding. For a MXene with intrinsic too-strong H adsorption, double C vacancies are effective in weakening the binding and promoting the activity. The activity tuning is closely correlated to the electronic structures of the defected MXene, where the highest occupied peak position of the surface O electronic states shows an apparent linear trend with ΔG_H and can be used to qualitatively predict the activity. The weakened or strengthened H adsorption by a C or M vacancy is attributed to the upshifted or downshifted Fermi level of surface O, respectively. Our results indicate the potential of defect chemistry to tune the catalytic activity of MXene and provide new possibilities to enhance the applications of MXene.

Advances in hydrogen production from electrocatalytic seawater splitting

As one of the most abundant resources on the Earth, seawater is not only a promising electrolyte for industrial hydrogen production through electrolysis, but also of great significance for the refining of edible salt. Despite the great potential for large-scale hydrogen production, the implementation of water electrolysis requires efficient and stable electrocatalysts that can maintain high activity for water splitting without chloride corrosion. Recent years have witnessed great achievements in the development of highly efficient electrocatalysts toward seawater splitting. Starting from the historical background to the most recent achievements, this review will provide insights into the current state, challenges, and future perspectives of hydrogen production through seawater electrolysis. In particular, the mechanisms of overall water splitting, key features of seawater electrolysis, noble-metal-free electrocatalysts for seawater electrolysis and the underlying mechanisms are also highlighted to provide guidance for fabricating more efficient electrocatalysts toward seawater splitting.

Novel nano network trigonal prismatic Ba2CoO4-deficient BaCoO3 for high-affinity sorption of radiolanthanide elements of biomedical applications: synthesis and sorption studies

Nano trigonal prismatic Ba2CoO4 with hierarchical structure and deficient BaCoO3 with columnar structure have been prepared at low temperatures (400 [BC4] and 500 [BC5]) °C/3h using green method. X-ray diffraction (XRD) results demonstrate the presence of enriched Ba2CoO4 phase at 400 °C and multiphase structures: BaCoO3, BaCoO3-δ, and Co3O4 with a decrease in the amount of Ba2CoO4 at 500 °C. The prepared powders are characterized by a high specific surface area (SSA) values which are reflected to the mode of synthesis that leads to produce materials with massive active sites. The SSA of BC4 is higher than that of BC5 which can be correlated to the difference in the microstructure analysis of BC4 and BC5 as given from scanning electron microscope (SEM) and high-resolution transmission electron microscope (HRTEM) studies. Electron spin resonance (ESR) spectroscopy as an effective method for the characterization of vacancy-rich nanostructures indicates that the presence of oxygen vacancies is related mainly to BaCoO3, BaCoO3-δ, and Co3O4 phases while the effective oxygen vacancies is in BaCoO3 and BaCoO3-δ. The nanocrystalline structures of BC4 and BC5 as novel nano-adsorbents are the first time to be tested. Production of Gd radioisotopes through natGd(n,γ)153,159,161Gd and carrier-free 161Tb through 160Gd(n,γ,) 161Gd [Formula: see text] 161Tb are achieved at 2nd Egyptian nuclear research reactor (ETRR-2). Preliminary sorption study of Gd radioisotopes (represent the lanthanide elements) shows a promising material for the application in the separation and removal of lanthanide elements. The results demonstrated that the fast interaction and efficient sorption of lanthanides ions are based on the novel synthesized nanomaterial that can be considered for the upscale application in this field.

Optimization of Ni-Co-Fe-Based Catalysts for Oxygen Evolution Reaction by Surface and Relaxation Phenomena Analysis

Trimetallic double hydroxide NiFeCo-OH is prepared by coprecipitation, from which three different catalysts are fabricated by different heat treatments, all at 350 °C maximum temperature. Among the prepared catalysts, the one prepared at a heating and cooling rate of 2 °C min^-1 in N₂ atmosphere (designated NiFeCo-N₂ -2 °C) displays the best catalytic properties after stability testing, exhibiting a high current density (9.06 mA cm^-2 at 320 mV), low Tafel slope (72.9 mV dec^-1 ), good stability (over 20 h), high turnover frequency (0.304 s^-1 ), and high mass activity (46.52 A g^-1 at 320 mV). Stability tests reveal that the hydroxide phase is less suitable for long-term use than catalysts with an oxide phase. Two causes are identified for the loss of stability in the hydroxide phase: a) Modeling of the distribution function of relaxation times (DFRT) reveals the increase in resistance contributed by various relaxation processes; b) density functional theory (DFT) surface energy calculations reveal that the higher surface energy of the hydroxide-phase catalyst impairs the stability. These findings represent a new strategy to optimize catalysts for water splitting.

Selenic Acid Etching Assisted Vacancy Engineering for Designing Highly Active Electrocatalysts toward the Oxygen Evolution Reaction

Oxygen evolution electrocatalysts are central to overall water splitting, and they should meet the requirements of low cost, high activity, high conductivity, and stable performance. Herein, a general, selenic-acid-assisted etching strategy is designed from a metal-organic framework as a precursor to realize carbon-coated 3d metal selenides M_m Se_n (Co_0.85 Se_{1- x} , NiSe_{2- x} , FeSe_{2- x} ) with rich Se vacancies as high-performance precious metal-free oxygen evolution reaction (OER) electrocatalysts. Specifically, the as-prepared Co_0.85 Se_{1- x} @C nanocages deliver an overpotential of only 231 mV at a current density of 10 mA cm^-2 for the OER and the corresponding full water-splitting electrolyzer requires only a cell voltage of 1.49 V at 10 mA cm^-2 in alkaline media. Density functional theory calculation reveals the important role of abundant Se vacancies for improving the catalytic activity through improving the conductivity and reducing reaction barriers for the formation of intermediates. Although phase change after long-term operation is observed with the formation of metal hydroxides, catalytic activity is not obviously affected, which strengthens the important role of the carbon network in the operating stability. This study provides a new opportunity to realize high-performance OER electrocatalysts by a general strategy on selenic acid etching assisted vacancy engineering.