Electrokinetic Analyses Uncover the Rate-Determining Step of Biomass-Derived Monosaccharide Electroreduction on Copper

Electrochemical biomass conversion holds promise to upcycle carbon sources and produce valuable products while reducing greenhouse gas emissions. To this end, deep insight into the interfacial mechanism is essential for the rational design of an efficient electrocatalytic route, which is still an area of active research and development. Herein, we report the reduction of dihydroxyacetone (DHA)-the simplest monosaccharide derived from glycerol feedstock-to acetol, the vital chemical intermediate in industries, with faradaic efficiency of 85±5 % on a polycrystalline Cu electrode. DHA reduction follows preceding dehydration by coordination with the carbonyl and hydroxyl groups and the subsequent hydrogenation. The electrokinetic profile indicates that the rate-determining step (RDS) includes a proton-coupled electron transfer (PCET) to the dehydrated intermediate, revealed by coverage-dependent Tafel slope and isotopic labeling experiments. An approximate zero-order dependence of H+ suggests that water acts as the proton donor for the interfacial PCET process. Leveraging these insights, we formulate microkinetic models to illustrate its origin that Eley-Rideal (E-R) dominates over Langmuir-Hinshelwood (L-H) in governing Cu-mediated DHA reduction, offering rational guidance that increasing the concentration of the adsorbed reactant alone would be sufficient to promote the activity in designing practical catalysts.

Multi-metallic Layered Catalysts for Stable Electrochemical CO2 Reduction to Formate and Formic Acid

Electrochemical CO2 reduction (ECR) to value-added products such as formate/formic acid is a promising approach for CO2 mitigation. Practical ECR requires long-term stability at industrially relevant reduction rates, which is challenging due to the rapid degradation of most catalysts at high current densities. Herein, we report the development of a bismuth (Bi) gas diffusion electrode on a polytetrafluoroethylene-based electrically conductive silver (Ag) substrate (Ag@Bi), which exhibits high Faradaic efficiency (FE) for formate of over 90 % in 1 M KOH and 1 M KHCO3 electrolytes. The catalyst also shows high selectivity of formic acid above 85 % in 1 M NaCl catholyte, which has a bulk pH of 2-3 during ECR, at current densities up to 300 mA cm-2. In 1 M KHCO3 condition, Ag@Bi maintains formate FE above 90 % for at least 500 hours at the current density of 100 mA cm-2. We found that the Ag@Bi catalyst degrades over time due to the leaching of Bi in the NaCl catholyte. To overcome this challenge, we deposited a layer of Ag nanoparticles on the surface of Ag@Bi to form a multi-layer Ag@Bi/Ag catalyst. This designed catalyst exhibits 300 hours of stability with FE for formic acid ≥70 % at 100 mA cm-2. Our work establishes a new strategy for achieving the operational longevity of ECR under wide pH conditions, which is critical for practical applications.

Impact of Temperature an Order of Magnitude Larger Than Electrical Potential in Lignin Electrolysis with Nickel

Lignin, a major component of plant biomass, is a promising sustainable alternative carbon-based feedstock to petroleum as a source of valuable aromatic compounds such as vanillin. However, lignin upgrading reactions are poorly understood due to its complex and variable molecular structure. This work focuses on electrocatalytic lignin upgrading, which is efficient and sustainable at moderate temperatures and pressures and does not require stoichiometric reagents. We used a meta-analysis of published lignin conversion and product yield data to define the operating range, to select the catalyst, and then performed electrocatalytic experiments. We quantified the impact of temperature and electrical potential on the formation rate of valuable products (vanillic acid, acetovanillone, guaiacol, vanillin, and syringaldehyde). We found that increasing temperature increases their formation rate by an order of magnitude more than increasing electrical potential. For example, increasing temperature from 21 to 180 °C increases the vanillin formation rate by +16.5 mg⋅L-1 ⋅h-1 ±1.7 mg⋅L-1 ⋅h-1 , while increasing electrical potential from 0 to 2 V increases the vanillin formation rate by -0.6 mg⋅L-1 ⋅h-1 ±1.4 mg⋅L-1 ⋅h-1 .

High-Density Cobalt Single-Atom Catalysts for Enhanced Oxygen Evolution Reaction

Single atom catalysts (SACs) possess unique catalytic properties due to low-coordination and unsaturated active sites. However, the demonstrated performance of SACs is limited by low SAC loading, poor metal-support interactions, and nonstable performance. Herein, we report a macromolecule-assisted SAC synthesis approach that enabled us to demonstrate high-density Co single atoms (10.6 wt % Co SAC) in a pyridinic N-rich graphenic network. The highly porous carbon network (surface area of ∼186 m² g^-1) with increased conjugation and vicinal Co site decoration in Co SACs significantly enhanced the electrocatalytic oxygen evolution reaction (OER) in 1 M KOH (η₁₀ at 351 mV; mass activity of 2209 mA mg_Co^-1 at 1.65 V) with more than 300 h stability. Operando X-ray absorption near-edge structure demonstrates the formation of electron-deficient Co-O coordination intermediates, accelerating OER kinetics. Density functional theory (DFT) calculations reveal the facile electron transfer from cobalt to oxygen species-accelerated OER.

Electroreduction of Carbon Dioxide to Acetate using Heterogenized Hydrophilic Manganese Porphyrins

The electrochemical reduction of carbon dioxide (CO₂ ) to value-added chemicals is a promising strategy to mitigate climate change. Metalloporphyrins have been used as a promising class of stable and tunable catalysts for the electrochemical reduction reaction of CO₂ (CO₂ RR) but have been primarily restricted to single-carbon reduction products. Here, we utilize functionalized earth-abundant manganese tetraphenylporphyrin-based (Mn-TPP) molecular electrocatalysts that have been immobilized via electrografting onto a glassy carbon electrode (GCE) to convert CO₂ with overall 94 % Faradaic efficiencies, with 62 % being converted to acetate. Tuning of Mn-TPP with electron-withdrawing sulfonate groups (Mn-TPPS) introduced mechanistic changes arising from the electrostatic interaction between the sulfonate groups and water molecules, resulting in better surface coverage, which facilitated higher conversion rates than the non-functionalized Mn-TPP. For Mn-TPP only carbon monoxide and formate were detected as CO₂ reduction products. Density-functional theory (DFT) calculations confirm that the additional sulfonate groups could alter the C-C coupling pathway from *CO→*COH→*COH-CO to *CO→*CO-CO→*COH-CO, reducing the free energy barrier of C-C coupling in the case of Mn-TPPS. This opens a new approach to designing metalloporphyrin catalysts for two carbon products in CO₂ RR.

High oxidation state enabled by plated Ni-P achieves superior electrocatalytic performance for 5-hydroxymethylfurfural oxidation reaction

Electrochemical 5-hydroxymethylfurfural oxidation reaction (HMFOR), as a clean biorefinery process, promotes a circular economy with value-added products. In HMFOR, the intrinsic catalytic activity and charge transfer mechanisms are crucial. Herein, nickel, co-deposited with phosphorus (Ni-P), attains superior electrocatalytic performance compared with Ni and its oxyhydroxides for the HMFOR. Such electrocatalytic activity of the Ni-P catalyst is attributed to the high oxidation state of surface Ni species, supported by the bulk Ni-P component. An unprecedented charge storing capacity enabled by the bulk Ni-P material maintains the spontaneous reaction between HMF and Ni3+ species to achieve a current density of 10 mA/cm² normalized by the electrochemical active surface area at a low potential of 1.42 V vs RHE, reaching a 97% Faradaic efficiency toward 2,5-furandicarboxylic acid. This work, for the first time, sheds light on the importance of the electrode bulk material by showcasing the HMFOR via the Ni-P catalyst incorporating a charge-holding bulk component.

•

Ni-P catalyst synthesized via cathodic Ni plating on the Ni-deposited carbon substrate

•

Ni-P catalyst possesses an excellent oxidation charge storing capacity

•

Core of Ni-P catalyst supports spontaneous HMFOR to FDCA at a low potential and OCP

•

97% FDCA Faradaic efficiency achieved with stable FDCA production of 10 cycles

CO2 Electrolysis via Surface-Engineering Electrografted Pyridines on Silver Catalysts

The electrochemical reduction of carbon dioxide (CO₂) to value-added materials has received considerable attention. Both bulk transition-metal catalysts and molecular catalysts affixed to conductive noncatalytic solid supports represent a promising approach toward the electroreduction of CO₂. Here, we report a combined silver (Ag) and pyridine catalyst through a one-pot and irreversible electrografting process, which demonstrates the enhanced CO₂ conversion versus individual counterparts. We find that by tailoring the pyridine carbon chain length, a 200 mV shift in the onset potential is obtainable compared to the bare silver electrode. A 10-fold activity enhancement at −0.7 V vs reversible hydrogen electrode (RHE) is then observed with demonstratable higher partial current densities for CO, indicating that a cocatalytic effect is attainable through the integration of the two different catalytic structures. We extended the performance to a flow cell operating at 150 mA/cm², demonstrating the approach’s potential for substantial adaptation with various transition metals as supports and electrografted molecular cocatalysts.

Boride-derived oxygen-evolution catalysts

Metal borides/borates have been considered promising as oxygen evolution reaction catalysts; however, to date, there is a dearth of evidence of long-term stability at practical current densities. Here we report a phase composition modulation approach to fabricate effective borides/borates-based catalysts. We find that metal borides in-situ formed metal borates are responsible for their high activity. This knowledge prompts us to synthesize NiFe-Boride, and to use it as a templating precursor to form an active NiFe-Borate catalyst. This boride-derived oxide catalyzes oxygen evolution with an overpotential of 167 mV at 10 mA/cm² in 1 M KOH electrolyte and requires a record-low overpotential of 460 mV to maintain water splitting performance for over 400 h at current density of 1 A/cm². We couple the catalyst with CO reduction in an alkaline membrane electrode assembly electrolyser, reporting stable C₂H₄ electrosynthesis at current density 200 mA/cm² for over 80 h.

CO2 electrolysis to multicarbon products at activities greater than 1 A cm-2

Electrolysis offers an attractive route to upgrade greenhouse gases such as carbon dioxide (CO₂) to valuable fuels and feedstocks; however, productivity is often limited by gas diffusion through a liquid electrolyte to the surface of the catalyst. Here, we present a catalyst:ionomer bulk heterojunction (CIBH) architecture that decouples gas, ion, and electron transport. The CIBH comprises a metal and a superfine ionomer layer with hydrophobic and hydrophilic functionalities that extend gas and ion transport from tens of nanometers to the micrometer scale. By applying this design strategy, we achieved CO₂ electroreduction on copper in 7 M potassium hydroxide electrolyte (pH ≈ 15) with an ethylene partial current density of 1.3 amperes per square centimeter at 45% cathodic energy efficiency.

Efficient upgrading of CO to C3 fuel using asymmetric C-C coupling active sites

The electroreduction of C₁ feedgas to high-energy-density fuels provides an attractive avenue to the storage of renewable electricity. Much progress has been made to improve selectivity to C₁ and C₂ products, however, the selectivity to desirable high-energy-density C₃ products remains relatively low. We reason that C₃ electrosynthesis relies on a higher-order reaction pathway that requires the formation of multiple carbon-carbon (C-C) bonds, and thus pursue a strategy explicitly designed to couple C₂ with C₁ intermediates. We develop an approach wherein neighboring copper atoms having distinct electronic structures interact with two adsorbates to catalyze an asymmetric reaction. We achieve a record n-propanol Faradaic efficiency (FE) of (33 ± 1)% with a conversion rate of (4.5 ± 0.1) mA cm⁻², and a record n-propanol cathodic energy conversion efficiency (EE_{cathodic half-cell}) of 21%. The FE and EE_{cathodic half-cell} represent a 1.3× improvement relative to previously-published CO-to-n-propanol electroreduction reports.

Catalysts for CO electroreduction have focused on Cu, and their main products have been C₂ chemicals. Here authors use the concept of asymmetric active sites to develop a class of doped Cu catalysts for C-C coupling, delivering record selectivity to n-propanol.

Electrochemical CO2 Reduction into Chemical Feedstocks: From Mechanistic Electrocatalysis Models to System Design

The electrochemical reduction of CO₂ is a promising route to convert intermittent renewable energy to storable fuels and valuable chemical feedstocks. To scale this technology for industrial implementation, a deepened understanding of how the CO₂ reduction reaction (CO₂ RR) proceeds will help converge on optimal operating parameters. Here, a techno-economic analysis is presented with the goal of identifying maximally profitable products and the performance targets that must be met to ensure economic viability-metrics that include current density, Faradaic efficiency, energy efficiency, and stability. The latest computational understanding of the CO₂ RR is discussed along with how this can contribute to the rational design of efficient, selective, and stable electrocatalysts. Catalyst materials are classified according to their selectivity for products of interest and their potential to achieve performance targets is assessed. The recent progress and opportunities in system design for CO₂ electroreduction are described. To conclude, the remaining technological challenges are highlighted, suggesting full-cell energy efficiency as a guiding performance metric for industrial impact.

Electro-Optic Modulation in Hybrid Metal Halide Perovskites

Rapid and efficient conversion of electrical signals to optical signals is needed in telecommunications and data network interconnection. The linear electro-optic (EO) effect in noncentrosymmetric materials offers a pathway to such conversion. Conventional inorganic EO materials make on-chip integration challenging, while organic nonlinear molecules suffer from thermodynamic molecular disordering that decreases the EO coefficient of the material. It has been posited that hybrid metal halide perovskites could potentially combine the advantages of inorganic materials (stable crystal orientation) with those of organic materials (solution processing). Here, layered metal halide perovskites are reported and investigated for in-plane birefringence and linear electro-optic response. Phenylmethylammonium lead chloride (PMA₂ PbCl₄ ) crystals are grown that exhibit a noncentrosymmetric space group. Birefringence measurements and Raman spectroscopy confirm optical and structural anisotropy in the material. By applying an electric field on the crystal surface, the linear EO effect in PMA₂ PbCl₄ is reported and its EO coefficient is determined to be 1.40 pm V^-1 . This is the first demonstration of this effect in hybrid metal halide perovskites, materials that feature both highly ordered crystalline structures and solution processability. The in-plane birefringence and electro-optic response reveal that layered perovskite crystals could be further explored for potential applications in polarizing optics and EO modulation.

A Surface Reconstruction Route to High Productivity and Selectivity in CO2 Electroreduction toward C2+ Hydrocarbons

Electrochemical carbon dioxide reduction (CO₂ ) is a promising technology to use renewable electricity to convert CO₂ into valuable carbon-based products. For commercial-scale applications, however, the productivity and selectivity toward multi-carbon products must be enhanced. A facile surface reconstruction approach that enables tuning of CO₂ -reduction selectivity toward C₂₊ products on a copper-chloride (CuCl)-derived catalyst is reported here. Using a novel wet-oxidation process, both the oxidation state and morphology of Cu surface are controlled, providing uniformity of the electrode morphology and abundant surface active sites. The Cu surface is partially oxidized to form an initial Cu (I) chloride layer which is subsequently converted to a Cu (I) oxide surface. High C₂₊ selectivity on these catalysts are demonstrated in an H-cell configuration, in which 73% Faradaic efficiency (FE) for C₂₊ products is reached with 56% FE for ethylene (C₂ H₄ ) and overall current density of 17 mA cm^-2 . Thereafter, the method into a flow-cell configuration is translated, which allows operation in a highly alkaline medium for complete suppression of CH₄ production. A record C₂₊ FE of ≈84% and a half-cell power conversion efficiency of 50% at a partial current density of 336 mA cm^-2 using the reconstructed Cu catalyst are reported.

2D Metal Oxyhalide-Derived Catalysts for Efficient CO2 Electroreduction

Electrochemical reduction of CO₂ is a compelling route to store renewable electricity in the form of carbon-based fuels. Efficient electrochemical reduction of CO₂ requires catalysts that combine high activity, high selectivity, and low overpotential. Extensive surface reconstruction of metal catalysts under high productivity operating conditions (high current densities, reducing potentials, and variable pH) renders the realization of tailored catalysts that maximize the exposure of the most favorable facets, the number of active sites, and the oxidation state all the more challenging. Earth-abundant transition metals such as tin, bismuth, and lead have been proven stable and product-specific, but exhibit limited partial current densities. Here, a strategy that employs bismuth oxyhalides as a template from which 2D bismuth-based catalysts are derived is reported. The BiOBr-templated catalyst exhibits a preferential exposure of highly active Bi ( 11¯0 ) facets. Thereby, the CO₂ reduction reaction selectivity is increased to over 90% Faradaic efficiency and simultaneously stable current densities of up to 200 mA cm^-2 are achieved-more than a twofold increase in the production of the energy-storage liquid formic acid compared to previous best Bi catalysts.

CO2 electroreduction to ethylene via hydroxide-mediated copper catalysis at an abrupt interface

Carbon dioxide (CO₂) electroreduction could provide a useful source of ethylene, but low conversion efficiency, low production rates, and low catalyst stability limit current systems. Here we report that a copper electrocatalyst at an abrupt reaction interface in an alkaline electrolyte reduces CO₂ to ethylene with 70% faradaic efficiency at a potential of -0.55 volts versus a reversible hydrogen electrode (RHE). Hydroxide ions on or near the copper surface lower the CO₂ reduction and carbon monoxide (CO)-CO coupling activation energy barriers; as a result, onset of ethylene evolution at -0.165 volts versus an RHE in 10 molar potassium hydroxide occurs almost simultaneously with CO production. Operational stability was enhanced via the introduction of a polymer-based gas diffusion layer that sandwiches the reaction interface between separate hydrophobic and conductive supports, providing constant ethylene selectivity for an initial 150 operating hours.

Acid-Assisted Ligand Exchange Enhances Coupling in Colloidal Quantum Dot Solids

Colloidal quantum dots (CQDs) are promising solution-processed infrared-absorbing materials for optoelectronics. In these applications, it is crucial to replace the electrically insulating ligands used in synthesis to form strongly coupled quantum dot solids. Recently, solution-phase ligand-exchange strategies have been reported that minimize the density of defects and the polydispersity of CQDs; however, we find herein that the new ligands exhibit insufficient chemical reactivity to remove original oleic acid ligands completely. This leads to low CQD packing and correspondingly low electronic performance. Here we report an acid-assisted solution-phase ligand-exchange strategy that, by enabling efficient removal of the original ligands, enables the synthesis of densified CQD arrays. Our use of hydroiodic acid simultaneously facilitates high CQD packing via proton donation and CQD passivation through iodine. We demonstrate highly packed CQD films with a 2.5 times increased carrier mobility compared with prior exchanges. The resulting devices achieve the highest infrared photon-to-electron conversion efficiencies (>50%) reported in the spectral range of 0.8 to 1.1 eV.

Activated Electron-Transport Layers for Infrared Quantum Dot Optoelectronics

Photovoltaic (PV) materials such as perovskites and silicon are generally unabsorptive at wavelengths longer than 1100 nm, leaving a significant portion of the IR solar spectrum unharvested. Small-bandgap colloidal quantum dots (CQDs) are a promising platform to offer tandem complementary IR PV solutions. Today, the best performing CQD PVs use zinc oxide (ZnO) as an electron-transport layer. However, these electrodes require ultraviolet (UV)-light activation to overcome the low carrier density of ZnO, precluding the realization of CQD tandem photovoltaics. Here, a new sol-gel UV-free electrode based on Al/Cl hybrid doping of ZnO (CAZO) is developed. Al heterovalent doping provides a strong n-type character while Cl surface passivation leads to a more favorable band alignment for electron extraction. CAZO CQD IR solar cell devices exhibit, at wavelengths beyond the Si bandgap, an external quantum efficiency of 73%, leading to an additional 0.92% IR power conversion efficiency without UV activation. Conventional ZnO devices, on the other hand, add fewer than 0.01 power points at these operating conditions.

Important Variation in Vibrational Properties of LiFePO4 and FePO4 Induced by Magnetism

A new thermodynamically self-consistent (TSC) method, based on the quasi-harmonic approximation (QHA), is used to obtain the Debye temperatures of LiFePO₄ (LFP) and FePO₄ (FP) from available experimental specific heat capacities for a wide temperature range. The calculated Debye temperatures show an interesting critical and peculiar behavior so that a steep increase in the Debye temperatures is observed by increasing the temperature. This critical behavior is fitted by the critical function and the adjusted critical temperatures are very close to the magnetic phase transition temperatures in LFP and FP. Hence, the critical behavior of the Debye temperatures is correlated with the magnetic phase transitions in these compounds. Our first-principle calculations support our conjecture that the change in electronic structures, i.e. electron density of state and electron localization function, and consequently the change in thermophysical properties due to the magnetic transition may be the reason for the observation of this peculiar behavior of the Debye temperatures.