Flexible Graphene-Wrapped Carbon Nanotube/Graphene@MnO2 3D Multilevel Porous Film for High-Performance Lithium-Ion Batteries

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

A Review of MnO2 Composites Incorporated with Conductive Materials for Energy Storage

Manganese dioxide (MnO₂ ) has been widely used in the field of energy storage due to its high specific capacitance, low cost, natural abundance, and being environmentally friendly. However, suffering from poor electrical conductivity and high dissolvability, the performance of MnO₂ can no longer meet the needs of rapidly growing technological development, especially for the application as electrode material in metal-ion batteries and supercapacitors. In this review, recent studies on the development of binary or multiple MnO₂ -based composites with conductive components for energy storage are summarized. Firstly, general preparing methods for MnO₂ -based composites are introduced. Subsequently, the binary and multiple MnO₂ -based composites with carbon, conducting polymer, and other conductive materials are discussed respectively. The improvement in their performance is summarized as well. Finally, perspectives on the practical applications of MnO₂ -based composites are presented.

Rational Design of Unique MoSe2-Carbon Nanobowl Particles Endows Superior Alkali Metal-Ion Storage Beyond Lithium

Attracted by the rich earth abundance and low-cost advantages, alkali metal-ion (Na/K)-based energy storage devices have attracted wide interest as promising candidates for energy economizing in recent years. Unfortunately, the lack of suitable host materials with high capacity and long life span for alkali metal-ion storage has severely impeded their practical application in large-scale energy storage devices. Herein, we present a promising anode candidate composed of ultrasmall MoSe₂ clusters embedded in a nitrogen-doped hollow carbon nanobowl substrate to form unique MoSe₂-Carbon nanobowl particles (denoted as MoSe₂⊂CNB). MoSe₂⊂CNB demonstrates exceptional electrochemical properties for alkali metal-ion storage including sodium and potassium. In situ Raman spectroscopy and galvanostatic intermittent titration measurements reveal the possible reason for the high performance of MoSe₂⊂CNB. Notably, the assembled potassium-ion hybrid capacitors could manifest an extraordinary energy density of 130.7 W h kg^-1 at 0.2 A g^-1, a high power density of 13,607 W kg^-1, and an enviable cycle life after 6000 cycles, further reflecting the great developmental potential for energy storage devices in practical applications. This work provides a new method to design functional nanostructures for electrode materials to drive the development and application of possible energy storage devices.

Constructing epitaxially grown heterointerface of metal nanoparticles and manganese dioxide anode for high-capacity and high-rate lithium-ion batteries

Low ion migration rate and irreversible change in the valence state in transition-metal oxides limit their application as anode materials in Li-ion batteries (LIBs). Interfacial optimization by loading metal particles on semiconductor can change the band structure and thus tune the inherent electrical nature of transition-metal oxide anode materials for energy applications. In this work, Au nanoparticles are epitaxially grown on MnO₂ nanoroads (MnO₂-Au). Interestingly, the MnO₂-Au anode shows excellent electrochemical activity. It delivers high reversible capacity (about 2-3 fold compared to MnO₂) and high rate capability (740 mA h g^-1 at 1 A g^-1). The electron holography and density functional theory (DFT) results demonstrate that the Au particles on the surface of MnO₂ can form a negative charge accumulation area, which not only improves the Li ion migration rate but also catalyzes the transition of MnO_x to Mn⁰. This study provides a direction to heterointerface fabrication for transition-metal oxide anode materials with desired properties for high-performance LIBs and future energy applications.

Binder-free and flexible delta-MnO2@multiwalled carbon nanotubes as high-performance cathode material for aqueous magnesium ion battery

In order to develop a high-performance electrode material for aqueous magnesium ion battery (AMIB), we report a binder-free and flexibleδ-MnO₂@multiwalled carbon nanotubes on carbon cloth (δ-MnO₂@MWCNTs/CC) composite by a simple hydrothermal method. The MnO₂nanoflakes are deposited on the surface of CC coated with high conductivity MWCNTs to form three-dimensional hierarchy architecture, which improves the electrochemical performances. Theδ-MnO₂@MWCNTs/CC electrode displays a discharge capacity of 246.7 mAh g^-1at a current density of 50 mA g^-1and its capacitance retention at a current density of 1000 mA g^-1can reach 80% after 2000 cycles. Furthermore, the AMIB system is assembled byδ-MnO₂@MWCNTs/CC as cathode and activated carbon as anode, which dispays a discharge capacity of 72.4 mAh g^-1at 100 mA g^-1. Theδ-MnO₂with interlayer structure can provide sufficient space for the insertion/deinsertion of Mg²⁺ions into/from the lattice of host materials without the change of phase. This work prepares a high-performance and flexible electrode material for low-cost AMIB system.

Multifunctional Batteries: Flexible, Transient, and Transparent

The primary task of a battery is to store energy and to power electronic devices. This has hardly changed over the years despite all the progress made in improving their electrochemical performance. In comparison to batteries, electronic devices are continuously equipped with new functions, and they also change their physical appearance, becoming flexible, rollable, stretchable, or maybe transparent or even transient or degradable. Mechanical flexibility makes them attractive for wearable electronics or for electronic paper; transparency is desired for transparent screens or smart windows, and degradability or transient properties have the potential to reduce electronic waste. For fully integrated and self-sufficient systems, these devices have to be powered by batteries with similar physical characteristics. To make the currently used rigid and heavy batteries flexible, transparent, and degradable, the whole battery architecture including active materials, current collectors, electrolyte/separator, and packaging has to be redesigned. This requires a fundamental paradigm change in battery research, moving away from exclusively addressing the electrochemical aspects toward an interdisciplinary approach involving chemists, materials scientists, and engineers. This Outlook provides an overview of the different activities in the field of flexible, transient, and transparent batteries with a focus on the challenges that have to be faced toward the development of such multifunctional energy storage devices.

Review on carbonaceous materials and metal composites in deformable electrodes for flexible lithium-ion batteries

With the rapid propagation of flexible electronic devices, flexible lithium-ion batteries (FLIBs) are emerging as the most promising energy supplier among all of the energy storage devices owing to their high energy and power densities with good cycling stability. As a key component of FLIBs, to date, researchers have tried to develop newly designed high-performance electrochemically and mechanically stable pliable electrodes. To synthesize better quality flexible electrodes, based on high conductivity and mechanical strength of carbonaceous materials and metals, several research studies have been conducted. Despite both materials-based electrodes demonstrating excellent electrochemical and mechanical performances in the laboratory experimental process, they cannot meet the expected demands of stable flexible electrodes with high energy density. After all, various significant issues associated with them need to be overcome, for instance, poor electrochemical performance, the rapid decay of the electrode architecture during deformation, and complicated as well as costly production processes thus limiting their expansive applications. Herein, the recent progression in the exploration of carbonaceous materials and metals based flexible electrode materials are summarized and discussed, with special focus on determining their relative electrochemical performance and structural stability based on recent advancement. Major factors for the future advancement of FLIBs in this field are also discussed.

The Sb/SbPO4@3D-G composite as a promising anode material for sodium-ion batteries

The Sb/SbPO₄@3D-G composite exhibits excellent electrochemical performance with PO₄³⁻ anions acting as a cushion and providing high conductivity.

Facile synthesis of reduced graphene oxide-wrapped CNFs with controllable chemical reduction degree for enhanced microwave absorption performance

The rGO-wrapped nanocomposites can be regarded as promising candidates for the development of advanced microwave absorbing materials. In this work, hierarchical rGO-wrapped CNFs were prepared via a two-step strategy, including a classical modified Hummers method and a green reduction reaction. Accompany with the chemical treatments, graphene oxide appears on the outer walls of carbon nanofibers. By modulating the addition amount of ascorbic acid, the outer graphene oxide can be controllably reduced. Moreover, the CNFs/rGO with proper reduction degree exhibits desirable microwave absorption performance, whose minimum RL and effective bandwidth are -38.1 dB (3.85 GHz, d = 5.0 mm) and 4.1 GHz (5.08-9.18 GHz, d = 3.5 mm). The superior microwave attenuation performance is attributed to the synergistic effects between the CNFs and rGO. While the nanofibers provide the obtained sample with an extremely long conductive network, rGO introduces a moderate amount of lattice defects and functional groups, resulting in desirable conductivity loss and multiple polarizations. The existence of rGO also endows CNFs/rGO with suitable dielectric values so that the absorber achieves well impedance matching. Considering the excellent microwave absorption performance, this research provides a new facile route to fabricate rGO-wrapped carbonaceous materials with proper oxygen-containing groups for MAMs.

Phase Dynamics on Conversion-Reaction-Based Tin-Doped Ferrite Anode for Next-Generation Lithium Batteries

The conventional view of conversion reaction is based on the reversibility, returning to an initial material structure through reverse reaction at each cycle in cycle life, which impedes the complete understanding on a working mechanism upon a progression of cycles in conversion-reaction-based battery electrodes. Herein, a series of tin-doped ferrites (Fe_{3- x}Sn _xO₄, x = 0-0.36) are prepared and applied to a lithium-ion battery anode. By achieving the ideal reoxidation into SnO₂, the Fe_2.76Sn_0.24O₄ composite anchored on reduced graphene oxide shows a high reversible capacity of 1428 mAh g^-1 at 200 mA g^-1 after 100 cycles, which is the best performance of Sn-based anode materials so far. Significantly, a newly formed γ-FeOOH phase after 100 cycles is identified from topological features through synchrotron X-ray absorption spectroscopy with electronic and atomic structural information, suggesting the phase transformation from magnetite to lepidocrocite upon cycling. Contrary to the conventional view, our work suggests a variable working mechanism in an iron-based composite with the dynamic phases from iron oxide to iron oxyhydroxide in the battery cycle life, based on the reactivity of metal nanoparticles formed during reaction toward the solid electrolyte interface layer.