Crystallization-Induced Emission Enhancement of a Deep-Blue Luminescence Material with Tunable Mechano- and Thermochromism

Thermal/Water-Induced Phase Transformation and Photoluminescence of Hybrid Manganese(II)-Based Chloride Single Crystals

Mn(II)-based hybrid halides have attracted great attention from the optoelectronic fields due to their nontoxicity, special luminescent properties, and structural diversity. Here, two novel organic-inorganic hybrid Mn(II)-based halide single crystals (1-mpip)MnCl4·3H2O and (1-mpip)2MnCl6 (1-mpip = 1-methylpiperazinium, C5H14N2+) were grown by a slow evaporation method in ambient atmosphere. Interestingly, (1-mpip)2MnCl6 single crystals exhibit the green emission with a PL peak at 522 nm and photoluminescence quantum yields (PLQYs) of ≈5.4%, whereas (1-mpip)MnCl4·3H2O single crystals exhibit no emission characteristics. More importantly, there exists a thermal-induced phase transformation from (1-mpip)MnCl4·3H2O to emissive (1-mpip)2MnCl6 at 372 K. Moreover, a reversible luminescent conversion between (1-mpip)MnCl4·3H2O and (1-mpip)2MnCl6 was simply achieved when heated to 383 K and placed in a humid environment or sprayed with water. This work not only deepens the understanding of the thermal-induced phase transformation and humidity-sensitive luminescent conversion of hybrid Mn(II)-based halides, but also provides a guidance for thermal and humidity sensing and anticounterfeiting applications of these hybrid materials.

Precise peripheral design enables propeller-like squaraine dye with highly sensitive and wide-range piezochromism

Piezochromic fluorescent (PCF) materials that feature high sensitivity and wide-range switching are attractive in intelligent optoelectronic applications but their fabrication remains a significant challenge. Here we present a propeller-like squaraine dye SQ-NMe₂ decorated with four peripheral dimethylamines acting as electron donors and spatial obstacles. This precise peripheral design is expected to loosen the molecular packing pattern and facilitate more substantial intramolecular charge transfer (ICT) switching caused by conformational planarization under mechanical stimuli. As such, the pristine SQ-NMe₂ microcrystal exhibits significant fluorescence changes from yellow (λ_em = 554 nm) to orange (λ_em = 590 nm) upon slight mechanical grinding and further to deep red (λ_em = 648 nm) upon heavy mechanical grinding. Single-crystal X-ray diffraction structural analysis of two SQ-NMe₂ polymorphs provides direct evidence to illustrate the design concept of such a piezochromic molecule. The piezochromic behavior of SQ-NMe₂ microcrystals is sensitive, high-contrast, and easily reversible, enabling cryptographic applications.

Aggregation Effect on Multiperformance Improvement in Aryl-Armed Phenazine-Based Emitters

The concept of aggregate science was proposed to explain changes in materials performance that accompany the generation of aggregates, but aggregation-triggered multifunction improvements in a class of materials have rarely been reported. Herein, we present the first report of a new class of multifunctional aggregation-induced emission (AIE) luminogens (AIEgens) based on 5,10-diarylphenazine (DPZ) derivates with full-wavelength emission. Intriguingly, multiple properties, such as fluorescence intensity and free radical and type I reactive oxygen species (ROS) efficiencies, could be simultaneously activated from the unimolecular level to the aggregate state. The mechanisms of this multiple performance improvement are discussed in detail based on sufficient performance characterization, and some of the newly prepared AIEgens exhibited toxicity to cancer cells during photodynamic therapy. This work systematically demonstrates the positive effect of aggregation on improving multiple functions of materials, which is expected to promote the development of aggregate science theory for the design of multifunctional materials.

Deep-Red Emissive Squaraine-AIEgen in Elastomer Enabling High Contrast and Fast Thermoresponse for Anti-Counterfeiting and Temperature Sensing

Two challenges remain for organic thermoresponsive materials; one is to develop high-performance red-emissive thermoresponsive materials, while another is to simultaneously achieve high contrast ratio (CR), fast and reversible thermoresponse in a single element. Herein, we not only develop a new deep-red emissive squaraine-based AIEgen (TPE-SQ12) based on a pyrylium end group, which is suitable for fabricating high-performance thermoresponsive materials, but also show an effective approach to improve both CR (∼ten times increase) and response time (less than 3 seconds), that is, molecularly dispersing AIEgen into an elastomer, attributed to the significantly expanded free volume of elastomer upon increasing the temperature that can activate the AIEgen intramolecular movements more pronouncedly. Double encryption and temperature mapping systems have been separately established by using our designed elastomer/TPE-SQ12 film, showing the great potential for anti-counterfeiting and temperature sensing. Finally, white emission is further achieved by co-doping TPE-SQ12 with cyan dye into elastomer, which enables fluorescent thermochromism for improving the temperature mapping ability.

Facilely prepared aggregation-induced emission (AIE) nanocrystals with deep-red emission for super-resolution imaging

Organic nanocrystals (NCs) with high brightness are highly desirable for biological imaging. However, the preparation of NCs by a facile and fast method is still challenging. Herein, an aggregation-induced emission (AIE) luminogen of 4,4'-(5,6-difluorobenzo[c][1,2,5]thiadiazole-4,7-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (DTPA-BT-F) in the deep-red region is designed with intensive crystalline features to obtain NCs by kinetically controlled nanoprecipitation. The prepared AIE NCs with high brightness and good photo-stability are then applied in super-resolution imaging via stimulated emission depletion (STED) nanoscopy. As observed, the nanostructures in lysosomes of both fixed and live cells are well visualized with superior lateral resolutions under STED nanoscopy (full width at half maximum values, 107 and 108 nm) in contrast to that in confocal imaging (548 and 740 nm). More importantly, dynamic monitoring and long-term tracking of lysosomal movements in live HeLa cells, such as lysosomal contact, can also be carried out by using DTPA-BT-F NCs at a superior resolution. To the best of our knowledge, this is the first case of AIE NCs prepared by nanoprecipitation for STED nanoscopy, thus providing a new strategy to develop high performance imaging agents for super-resolution imaging.

From fluorogens to fluorophores by elucidation and suppression of ultrafast excited state processes of a Schiff base

Strategies have been explored for developing strongly fluorescent species out of a weakly fluorescent Schiff base, 2-(((pyridin-2-ylmethyl)imino)methyl)phenol (salampy). The locally excited enolic state of salampy undergoes an intramolecular proton transfer with a time constant of ca. 200 fs. The emissive cis keto state thus formed decays completely within 50 ps. Its fast decay and miniscule fluorescence quantum yield are attributed to efficient non-radiative channels associated with conformational relaxation. The anionic form, salampy^-, has a significantly longer fluorescence lifetime of 800 ps. Its emissive state evolves in tens of picoseconds, from the locally excited state, by solvent and conformational relaxation. Both the neutral and anionic forms have a fluorescence lifetime of about 6 ns at 77 K, a temperature at which all activated nonradiative channels are blocked. This lifetime is similar to that obtained at room temperature, upon rigidification of the anion by complexation with Zn²⁺. Two such complexes have been studied. The first is binuclear, with acetate bridge between the two Zn²⁺ ions. The second, with ClO₄^- as the counterion, is mononuclear with two salampy ligands ligating the metal ion. Unlike a previous report on a different Schiff base, in which the ligands are π-stacked in its dimeric Zn²⁺ complex, no additional nonradiative deactivation pathway opens up in the Zn complexes of salampy, which are devoid of such stacking. The complex of salampy with Al³⁺ has an even longer fluorescence lifetime of 9 ns, indicating a greater degree of rigidification and consequent suppression of nonradiative processes.

Stimuli-Responsive AIEgens

The unique advantages and the exciting application prospects of AIEgens have triggered booming developments in this area in recent years. Among them, stimuli-responsive AIEgens have received particular attention and impressive progress, and they have been demonstrated to show tremendous potential in many fields from physical chemistry to materials science and to biology and medicine. Here, the recent achievements of stimuli-responsive AIEgens in terms of seven most representative types of stimuli including force, light, polarity, temperature, electricity, ion, and pH, are summarized. Based on typical examples, it is illustrated how each type of systems realize the desired stimuli-responsive performance for various applications. The key work principles behind them are ultimately deciphered and figured out to offer new insights and guidelines for the design and engineering of the next-generation stimuli-responsive luminescent materials for more broad applications.

Visualization and Manipulation of Solid-State Molecular Motions in Cocrystallization Processes

Solid-state molecular motions (SSMM) play a critical role in adjusting behaviors and properties of materials. However, research on SSMM, especially for multicomponent systems, suffers from various problems and is rarely explored. Herein, through collaboration with cocrystal engineering, visualization and manipulation of SSMM in two-component systems, namely, FSBO ((E)-2-(4-fluorostyryl)benzo[d]oxazole)/TCB (1,2,4,5-tetracyanobenzene) and PVBO ((E)-2-(2-(pyridin-4-yl)vinyl)benzo[d]oxazole)/TCB, were realized. The obtained yellow-emissive F/T (FSBO/TCB) cocrystal displayed turn-on fluorescence, and the green-emissive P/T (PVBO/TCB) cocrystal presented redder emission, both of which exhibited an aggregation-induced emission property. At varied pressure and temperature, the grinding mixtures of FSBO/TCB and PVBO/TCB displayed different molecular motions that were readily observed through the fluorescence signal. Notably, even without grinding, FSBO and TCB molecules could move over for 4 mm in a 1D tube. The unique emission changes induced by SSMM were applied in information storage and dynamic anticounterfeiting. This work not only visualized and manipulated SSMM but offered more insights for multicomponent study in aggregate science.

Influence of Calcination Temperature on Crystal Growth and Optical Characteristics of Eu3+ Doped ZnO/Zn2SiO4 Composites Fabricated via Simple Thermal Treatment Method

This research paper proposes the usage of a simple thermal treatment method to synthesis the pure and Eu3+ doped ZnO/Zn2SiO4 based composites which undergo calcination process at different temperatures. The effect of calcination temperatures on the structural, morphological, and optical properties of ZnO/Zn2SiO4 based composites have been studied. The XRD analysis shows the existence of two major phases which are ZnO and Zn2SiO4 crystals and supported by the finding in the FT-IR. The FESEM micrograph further confirms the existence of both ZnO and Zn2SiO4 crystal phases, with progress in the calcination temperature around 700–800 °C which affects the existence of the necking-like shape particle. Absorption humps discovered through UV-Vis spectroscopy revealed that at the higher calcination temperature effects for higher absorption intensity while absorption bands can be seen at below 400 nm with dropping of absorption bands at 370–375 nm. Two types of band gap can be seen from the energy band gap analysis which occurs from ZnO crystal and Zn2SiO4 crystal progress. It is also discovered that for Eu3+ doped ZnO/Zn2SiO4 composites, the Zn2SiO4 crystal (5.11–4.71 eV) has a higher band gap compared to the ZnO crystal (3.271–4.07 eV). While, for the photoluminescence study, excited at 400 nm, the emission spectra of Eu3+ doped ZnO/Zn2SiO4 revealed higher emission intensity compared to pure ZnO/Zn2SiO4 with higher calcination temperature exhibit higher emission intensity at 615 nm with 700 °C being the optimum temperature. The emission spectra also show that the calcination temperature contributed to enhancing the emission intensity.

Naphthalimide-Based Hydrazone Derivatives: Synthesis, Mechanochromism in the Solid State and Response to Ions in Dilute Solutions

Molecules showing mechanochromic luminescence (MCL) are promising for use in the in the fields of sensing and probes. We report the design and synthesis of new naphthalimide-based hydrazone derivatives, NI-TPE and NI-3BA. Both the luminogens are weakly emissive with ^s Φ_f =0.3 % and 0.5 % respectively when aggregated in amorphous states as strong π-π stacking and intermolecular interaction prevent luminescence. On the contrary, in the crystalline state, single crystal analysis of two derivatives shows that nonradiative decay is reduced or inhibited by molecular stacking modes and intermolecular interactions. Increases of fluorescence emission intensity to ^s Φ_f =5.5 % and 6.0 % upon solvent evaporation are attributed to weak π-π overlapping and hydrogen bonding (N-H ⋅⋅⋅ O, distance 2.99 Å), which are beneficial to the formation of molecules with a loose packing. At the same time, the packing modes that the two derivatives adopt in the crystal lattice are destroyed to result in a low solid-state fluorescence quantum yield and a bathochromic shift of 23-25 nm upon grinding. All these factors cause the two derivatives show an unusual "turn off" MCL phenomenon. The fluorescence emission, its pH reversibility, and selective response to fluoride and acetate ions of up to 91-93 % in dilute solutions were also demonstrated.

Light-fueled rapid macroscopic motion of a green fluorescent organic crystal

We report here a new green fluorescent organic crystal of an amide functionalized acrylonitrile derivative (E-ArF2) that displays various types of macroscopic response when illuminated with UV light (390 nm).

Multi-Stimuli Responsive FRET Processes of Bifluorophoric AIEgens in an Amphiphilic Copolymer and Its Application to Cyanide Detection in Aqueous Media

A novel amphiphilic aggregation-induced emission (AIE) copolymer, that is, poly(NIPAM-co-TPE-SP), consisting of N-isopropylacrylamide (NIPAM) as a hydrophilic unit and a tetraphenylethylene-spiropyran monomer (TPE-SP) as a bifluorophoric unit is reported. Upon UV exposure, the close form of non-emissive spiropyran (SP) in poly(NIPAM-co-TPE-SP) can be photo-switched to the open form of emissive merocyanine (MC) in poly(NIPAM-co-TPE-MC) in an aqueous solution, leading to ratiometric fluorescence of AIEgens between green TPE and red MC emissions at 517 and 627 nm, respectively, via Förster resonance energy transfer (FRET). Distinct FRET processes of poly(NIPAM-co-TPE-MC) can be observed under various UV and visible light irradiations, acid-base conditions, thermal treatments, and cyanide ion interactions, which are also confirmed by theoretical studies. The subtle perturbations of environmental factors, such as UV exposure, pH value, temperature, and cyanide ion, can be detected in aqueous media by distinct ratiometric fluorescence changes of the FRET behavior in the amphiphilic poly(NIPAM-co-TPE-MC). Moreover, the first FRET sensor polymer poly(NIPAM-co-TPE-MC) based on dual AIEgens of TPE and MC units is developed to show a very high selectivity and sensitivity with a low detection limit (LOD = 0.26 μM) toward the cyanide ion in water, which only contain an approximately 1% molar ratio of the bifluorophoric content and can be utilized in cellular bioimaging applications for cyanide detections.

A Fluorescence-Phosphorescence-Phosphorescence Triple-Channel Emission Strategy for Full-Color Luminescence

Organic luminogens constitute promising prototypes for various optoelectronic applications. Since gaining distinct color emissions normally requires the alternation of the conjugated backbone, big issues remain in material synthetic cost and skeleton compatibility while pursuing full-color luminescence. Upon a facile one-step coupling, three simple but smart perchalcogenated (O, S, and Se) arenes are synthesized. They exhibit strong luminescent tricolor primaries (i.e., blue, green, and red, respectively) in the solid state with a superior quantum yield up to >40% (5-10 times higher than that in corresponding solutions). The properties originate from a fluorescence-phosphorescence-phosphorescence triple-channel emission effect, which is regulated by S and Se heavy atoms-dependent intersystem crossing upon molecular packing, as well as Se-Se atom interaction-caused energy splittings. Consequently, full-color luminescence, including a typical white-light luminescence with a Commission Internationale de I'Eclairage coordinate of (0.30, 0.35), is realized by complementarily incorporating these tricolor luminescent materials in the film. Moreover, mechanochromic luminescent color conversions are also observed to achieve the fine-tuning of the luminescent tints. This strategy can be smart to address full-color luminescence on the same molecular skeleton, showing better material compatibility as an alternative to the traditional multiple-luminophore engineering.

A Strongly Fluorescent Molecular Material Responsive to Physical/Chemical Stimuli and their Coupled Impact

Molecular materials with weak but extended and pliable supramolecular interactions are versatile candidates for eliciting stimuli-sensitive optical responses. A novel diaminodicyanoquinodimethane (DADQ) molecule, 7,7-bis(2-(2-pyridyl)ethylamino)-8,8-dicyanoquinodimethane (BPEDQ), has been synthesized and structurally characterized; it exhibits enhanced fluorescence emission in the aggregated and solid states, characteristic of DADQs. The pyridine moieties in the molecule, in addition to the amino and cyano groups of the strongly dipolar fluorophore moiety, induce extensive H-bonding interactions which can impart structural integrity to the solid material; this enables reversible crystalline-amorphous transformations triggered by mechanical grinding and solvent fuming. The concomitant fluorescence color and intensity switching are prominent and reversible. Protonation-deprotonation events induced by acidic and basic vapors also produce stark fluorescence response variations; the chemical stimuli also lead to amorphization of the solid. The full cycle of chemical and physical stimuli, and the consequence of their individual and coupled impact on the fluorescence emission, are illustrated using a BPEDQ-doped polymer thin film.

Raspberry-Shaped Thermochromic Energy Storage Nanocapsule with Tunable Sunlight Absorption Based on Color Change for Temperature Regulation

A novel raspberry-shaped thermochromic energy storage nanocapsule (RTESN) is successfully designed and fabricated with switchable sunlight absorption capacity based on color change for temperature regulation. The RTESN is developed by grafting amino-modified silica shell thermochromic nanoparticles (amino-TLD@SiO₂ ) on the surface of epoxy-functionalized energy storage nanocapsules (paraffin@PSG), with a total particle size about 450 nm. RTESN exhibits a deep color under low temperatures, which can absorb sunlight for heating. During the continuous thermal energy supply, paraffin@PSG is capable of storing thermal energy owing to its large latent heat capacity of 118.7 J g^-1 , thereby maintaining the slow temperature increase. When the temperature is higher than the phase change temperature of paraffin@PSG, the color of amino-TLD@SiO₂ turns to white with more reflection of sunlight so that it reduces the absorption of thermal energy and prevents the further increase of temperature. The thermal regulation behavior is confirmed by setting up a wooden house with the surface covered with RTESN. Compared with the blank wooden house, the RTESN covered wooden house (RTESN-H) displays thermal insulation performances during heating and cooling with a maximum temperature difference of 7 °C.

Solvation-dependent switching of solid-state luminescence of a fluorinated aromatic tetrapyrazole

Creating stimuli-responsive materials with switchable solid-state luminescence remains a challenge. We report that the solvation of a novel organic fluorophore can be utilized to prepare such a material, which emits in the blue (442-446 nm) region when wet and in the green (497-503 nm) region when dry.

Confining an Ag10 Core in an Ag12 Shell: A Four-Electron Superatom with Enhanced Photoluminescence upon Crystallization

We introduce a cluster coprotected by thiol and diphosphine ligands, [Ag₂₂(dppe)₄(2,5-DMBT)₁₂Cl₄]²⁺ (dppe = 1,2-bis(diphenylphosphino)ethane; 2,5-DMBT= 2,5-dimethylbenzenethiol), which has an Ag₁₀ core encapsulated by an Ag₁₂(dppe)₄(2,5-DMBT)₁₂Cl₄ shell. The Ag₁₀ core comprises two Ag₅ distorted trigonal bipyramidal units and is uncommon in Au and Ag nanoclusters. The electrospray ionization mass spectrum reveals that the cluster is divalent and contains four free electrons. An uncommon crystallization-induced enhancement of emission is observed in the cluster. The emission is weak in the solution and amorphous states. However, it is enhanced 12 times in the crystalline state compared to the amorphous state. A detailed investigation of the crystal structure suggests that well-arranged C-H···π and π···π interactions between the ligands are the major factors for this enhanced emission. Further, in-depth structural elucidation and density functional theory calculations suggest that the cluster is a superatom with four magic electrons.

Water-soluble and highly emissive near-infrared nano-probes by co-assembly of ionic amphiphiles: towards application in cell imaging

Highly emissive near-infrared nano-emitters formed by co-assembly of ionic amphiphiles were applicable in cell imaging.