In Situ Observations of Shell Growth and Oxidative Etching Behaviors of Pd Nanoparticles in Solutions by Liquid Cell Transmission Electron Microscopy

Size-dependent growth dynamics of silver-gold core-shell nanoparticles monitored by in situ second harmonic generation and extinction spectroscopy

The in situ growth dynamics of colloidal silver-gold core-shell (Ag@Au CS) nanoparticles (NPs) are studied using time-dependent second harmonic generation (SHG) and extinction spectroscopy. Four sequential additions of chloroauric acid, sodium citrate, and hydroquinone are added to a silver nanoparticle solution to form a gold shell around a 45 nm silver core under different reaction conditions, resulting in final sizes ranging from 80 to 125 nm in diameter. In the first addition, a bumpy, urchin-like surface morphology is produced, while the second, third, and fourth additions provide additional nanoparticle growth with the surface morphology becoming more smooth and uniform, as shown using transmission electron microscopy measurements. The in situ extinction spectra increase in intensity for each addition, where blue-shifting and spectral narrowing are observed as the Ag@Au CS NPs grow in size. The extinction spectra are compared to Mie theory simulations, showing general agreement at later stages of the reactions for smooth CS surfaces. The in situ SHG signal is dominated by surface-enhanced plasmonic hotspots at the early stages of the shell growth, followed by gradual decreases in signal as the surface becomes more smooth. Two-photon fluorescence is also monitored during the CS growth, showing complementary information for comparisons to the extinction and SHG results. The holistic study of the synthesis and characterization of Ag@Au CS nanoparticles using in situ SHG spectroscopy, extinction spectroscopy, and Mie theory simulations allows for a comprehensive analysis of the complex growth dynamics occurring at the nanoscale for developing optimized plasmonic nanomaterial properties.

Nano-Si for On-Demand H2 Production: Optimization of Yield and Real-Time Visualization of Si─H2O Reaction Using Liquid-Phase Transmission Electron Microscopy

Hydrogen (H2), the most abundant element in the universe, has the potential to address the challenges of energy security and climate change. However, due to the lack of a safe and efficient method for storing and delivering hydrogen, its practical application is still in its infancy stages. To overcome this challenge, a promising solution is demonstrated in the form of on-demand production of H2 using nano-Silicon (Si) powders. The method offers instantaneous production of H2, yielding a volume of 1.3 L per gram of Si at room temperature. Moreover, the H2 production yield and the rate can be effectively controlled by adjusting the reaction pH value and temperatures. Additionally, liquid-phase transmission electron microscopy (LPTEM) is utilized in situ to demonstrate the entire reaction in real-time, wherein H2 bubble formation is observed and illustrated the gradual conversion of crystalline Si particles into amorphous oxides. Moreover, it is confirmed that the purity of the generated gas is 99.5% using gas chromatography mass spectrometry (GC-MS). These findings suggest a viable option for instant H2 production in portable fuel cells using Si cartridges or pellets.

In Situ Kinetic Observations on Crystal Nucleation and Growth

Nucleation and growth are critical steps in crystallization, which plays an important role in determining crystal structure, size, morphology, and purity. Therefore, understanding the mechanisms of nucleation and growth is crucial to realize the controllable fabrication of crystalline products with desired and reproducible properties. Based on classical models, the initial crystal nucleus is formed by the spontaneous aggregation of ions, atoms, or molecules, and crystal growth is dependent on the monomer's diffusion and the surface reaction. Recently, numerous in situ investigations on crystallization dynamics have uncovered the existence of nonclassical mechanisms. This review provides a summary and highlights the in situ studies of crystal nucleation and growth, with a particular emphasis on the state-of-the-art research progress since the year 2016, and includes technological advances, atomic-scale observations, substrate- and temperature-dependent nucleation and growth, and the progress achieved in the various materials: metals, alloys, metallic compounds, colloids, and proteins. Finally, the forthcoming opportunities and challenges in this fascinating field are discussed.

In Situ Transmission Electron Microscopy Investigation of Melting/Evaporation Kinetics in Anisotropic Gold Nanoparticles

We report on thermal stability and phase transition behaviors of triangular Au nanoprisms through in situ heating transmission electron microscopy. With rising temperature, Au nanoprisms exhibit fluctuating surface reconstructions at the corner regions. When a quasi-melting state is reached at the temperature below bulk melting points, the evaporation is initiated commonly at a corner with low curvature and containing sharp intersection points. The subsequent annealing process leads to the gradual evaporation, which, in the absence of thick carbon coverages, is accompanied by marked shape reconstructions. The thermal stability and evaporation behaviors are not evidently regulated by nanoprism aggregations.

Growth Dynamics of Colloidal Silver-Gold Core-Shell Nanoparticles Studied by In Situ Second Harmonic Generation and Extinction Spectroscopy

The in situ growth dynamics of colloidal silver-gold core-shell (Ag@Au CS) nanoparticles (NPs) in water are monitored in a stepwise synthesis approach using time-dependent second harmonic generation (SHG) and extinction spectroscopy. Three sequential additions of chloroauric acid, sodium citrate, and hydroquinone are added to the silver nanoparticle solution to grow a gold shell around a silver core. The first addition produces a stable urchin-like surface morphology, while the second and third additions continue to grow the gold shell thickness as the surface becomes more smooth and uniform, as determined using transmission electron microscopy. The extinction spectra after each addition are compared to finite-difference time-domain (FDTD) calculations, showing large deviations for the first and second additions due to the bumpy surface morphology and plasmonic hotspots while showing general agreement after the third addition reaches equilibrium. The in situ SHG signal is dominated by the NP surface, providing complementary information on the growth time scales due to changes to the surface morphology. This combined approach of synthesis and characterization of Ag@Au CS nanoparticles with in situ SHG spectroscopy, extinction spectroscopy, and FDTD calculations provides a detailed foundation for investigating complex colloidal nanoparticle growth mechanisms and dynamics in developing enhanced plasmonic nanomaterial technologies.

Focused Ion Beam Sample Preparation for In Situ Thermal and Electrical Transmission Electron Microscopy

A focused ion beam (FIB) technique describing the preparation of specimens for in situ thermal and electrical transmission electron microscopy is presented in detail. The method can be applied to a wide range of materials and allows the sample to be thinned down to electron transparency while it is attached to the in situ chip. This offers the advantage that the specimen can have a quality in terms of contamination and damage due to the ion beam that is comparable to samples prepared by means of conventional FIB preparation. Additionally, our technique can be performed by most commercially available FIB devices and only requires three simple, custom stubs for the procedure. This should enable a large userbase for this type of sample fabrication. One further benefit of our technique is that the in situ chip can be reused to create another sample on the same chip. The quality of the samples is demonstrated by high-resolution transmission electron microscopy as well as electron energy loss spectroscopy.

Developments and advances in in situ transmission electron microscopy for catalysis research

Recent developments and advances in in situ TEM have raised the possibility to study every step during the catalysts' lifecycle. This review discusses the current state, opportunities and challenges of in situ TEM in the realm of catalysis.

Selective shortening of gold nanorods: when surface functionalization dictates the reactivity of nanostructures

The selective shortening of gold nanorods (NRs) is a directional etching process that has been intensively studied by UV-Vis spectroscopy because of its direct impact on the optical response of these plasmonic nanostructures. Here, liquid-cell transmission electron microscopy is exploited to visualize this peculiar corrosion process at the nanoscale and study the impacts of reaction kinetics on the etching mechanisms. In situ imaging reveals that anisotropic etching requires a chemical environment with a low etching power to make the tips of NRs the only reaction site for the oxidation process. Then, aberration-corrected TEM and atomistic simulations were combined to demonstrate that the disparity between the reactivity of the body and the ends of NRs does not derive from their crystal structure but results from an inhomogeneous surface functionalization. In a general manner, this work highlights the necessity to consider the organic/inorganic natures of nanostructures to understand their chemical reactivity.

A Large-Scale Array of Ordered Graphene-Sandwiched Chambers for Quantitative Liquid-Phase Transmission Electron Microscopy

Liquid-phase transmission electron microscopy (TEM) offers a real-time microscopic observation of the nanometer scale for understanding the underlying mechanisms of the growth, etching, and interactions of colloidal nanoparticles. Despite such unique capability and potential application in diverse fields of analytical chemistry, liquid-phase TEM studies rely on information obtained from the limited number of observed events. In this work, a novel liquid cell with a large-scale array of highly ordered nanochambers is constructed by sandwiching an anodic aluminum oxide membrane between graphene sheets. TEM analysis of colloidal gold nanoparticles dispersed in the liquid is conducted, employing the fabricated nanochamber array, to demonstrate the potential of the nanochamber array in quantitative liquid-phase TEM. The independent TEM observations in the multiple nanochambers confirm that the monomer attachment and coalescence processes universally govern the overall growth of nanoparticles, although individual nanoparticles follow different growth trajectories.

Effect of the driving force on nanoparticles growth and shape: an opto-electrochemical study

Most protocols developed to synthesize nanoparticles (NPs) and to control their shape are inspired from nucleation and growth theories. However, to rationalize the mechanisms of the shape-selective synthesis of NPs, experimental strategies allowing to probe in situ the growth of NPs are needed. Herein, metal Au or Ag nanoparticles (NPs) are produced by reaction of a metallic ion precursor with a reversible redox reducer. The process is explored by an oxidative electrosynthesis strategy using a sacrificial Au or Ag ultramicroelectrode to both trigger the metallic ion generation and control the local concentrations of the different reactants. The effect of the driving force for the metallic ion reduction over metal NP growth dynamics is inspected in situ and in real time at the single NP level by high-resolution optical microscopy from the tracking of the Brownian trajectories of the growing NPs in solution. The NP reductive growth/oxidative etching thermodynamics, and consequently the NP shape, are shown to be controlled electrochemically by the reversible redox couple, while the intervention of an Au(i) intermediate ion is suggested to account for the formation of gold nanocubes.

Synthesis, growth mechanisms, and applications of palladium-based nanowires and other one-dimensional nanostructures

Palladium-based nanostructures have attracted the attention of researchers due to their useful catalytic properties and unique ability to form hydrides, which finds application in hydrogen storage and hydrogen detection. Palladium-based nanowires have some inherent advantages over other Pd nanomaterials, combining high surface-to-volume ratio with good thermal and electron transport properties, and exposing high-index crystal facets that can have enhanced catalytic activity. Over the past two decades, both synthesis methods and applications of 1D palladium nanostructures have advanced greatly. In this review, we start by discussing different types of 1D palladium nanostructures before moving on to the different synthesis approaches that can produce them. Next, we discuss factors including kinetic vs. thermodynamic control of growth, oxidative etching, and surface passivation that affect palladium nanowire synthesis. We also review efforts to gain insight into growth mechanisms using different characterization tools. We discuss the effects of concentration of capping agents, reducing agents, metal halides, pH, and sacrificial oxidation on the growth of Pd-based nanowires in solution, from shape control, to yield, to aspect ratio. Various applications of palladium and palladium alloy nanowires are then discussed, including electrocatalysis, hydrogen storage, and sensing of hydrogen and other chemicals. We conclude with a summary and some perspectives on future research directions for this category of nanomaterials.