Abundant Ce3+ Ions in Au-CeOx Nanosheets to Enhance CO2 Electroreduction Performance

Decomposition Model of Bastnaesite and Its Fluorine Oxygen Coupling Escape Mechanism

Nearly 90% of rare earths worldwide currently originate from bastnaesite (REFCO3). Oxidative roasting, an effective method for the treatment of bastnaesite, has been extensively employed in industrial production practice. However, the roasting decomposition mechanism of bastnaesite at the molecular level remains controversial. In this study, two roasting atmospheres (i.e., Ar and O2) were adopted for the treatment of the mixed rare earth concentrate in Bayan Obo. Ar-Roasting ore was skillfully treated as an intermediate and then underwent oxidation roasting. The results achieved using research methods (e.g., XRD, FT-IR, TEM, and XPS) first revealed that the oxidation roasting of bastnaesite was performed in several stages. The first stage was the thermal decomposition of bastnaesite and the oxidation of cerium (REFCO3 → REOF + CO2). The second stage was the escape pathway of fluorine (REOF + O2 → RE x O y + O x F and O x F → O2 + F2), describing the migration rules of F and O elements and the oxidation behavior of Ce. The results of this study can provide more theoretical support and guidance for the clean extraction of bastnaesite and mixed rare earth in Bayan Obo.

Promotion of CO2 Electroreduction on Bismuth Nanosheets with Cerium Oxide nanoparticles

Formic acid (HCOOH) is a highly energy efficient product of the electrochemical CO2 reduction reaction (CO2RR). Bismuth-based catalysts have shown promise in the conversion of CO2 to formic acid, but there is still a great need for further improvement in selectivity and activity. Herein, we report the preparation of Bi nanosheets decorated by cerium oxide nanoparticles (CeOx) with high Ce3+/Ce4+ ratio and rich oxygen vacancies. The CeOx nanoparticles affect the electronic structures of bismuth, enhance CO2 adsorption, and thus promote the CO2RR properties of Bi nanosheets. Compared with elemental Bi nanosheets, the hetero-structured CeOx/Bi nanosheets exhibit much higher activity over a wide potential window, showing a current density of 16.1 mA cm-2 with a Faradaic efficiency of 91.1% at -0.9 V vs. reversible hydrogen electrode.

Catalytic Peculiarity of Alkali Metal Cation-Free Electrode/Polyelectrolyte Interfaces Toward CO2 Reduction

A prominent feature of modern electrochemical technologies, such as fuel cells and electrolysis, is the employing of polyelectrolytes instead of liquid electrolytes. Unlike the well-studied electrode/liquid electrolyte interfaces, however, the catalytic characteristics of electrode/polyelectrolyte interfaces remain largely unexplored, mostly due to the lack of reliable probing methods. Herein, we report a universally applicable approach to investigating electrocatalytic reactions at electrode/polyelectrolyte interfaces under normal electrochemical conditions. By coating a thin layer of anion-exchange membrane (AEM) onto the electrode surface, solutions with bulky organic cations were well separated, thus a pure electrode/polyelectrolyte interface can be established in a regular electrochemical setup and studied using in situ spectroscopies, e.g., attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). We found that the blank Au surface was inert toward the CO2 reduction reaction (CO2RR) in the absence of alkali metal cations, whereas coating with an AEM can dramatically turn on the catalytic activity. ATR-SEIRAS revealed that the hydrogen bond network of water at the Au/AEM interface was enhanced in comparison to that on the blank Au surface, which facilitated the hydrogenation process of the CO2RR. These findings further our fundamental understanding of the catalytic behavior of electrode/polyelectrolyte interfaces and benefit the development of relevant electrochemical technologies.

Integration of MnO2 Nanosheets with Pd Nanoparticles for Efficient CO2 Electroreduction to Methanol in Membrane Electrode Assembly Electrolyzers

It remains a challenge to design a catalyst with high selectivity at a large current density toward CO2 electrocatalytic reduction (CO2ER) to a single C1 liquid product of methanol. Here, we report the design of a catalyst by integrating MnO2 nanosheets with Pd nanoparticles to address this challenge, which can be implemented in membrane electrode assembly (MEA) electrolyzers for the conversion of CO2ER to methanol. Such a strategy modifies the electronic structure of the catalyst and provides additional active sites, favoring the formation of key reaction intermediates and their successive evolution into methanol. The optimal catalyst delivers a Faradaic efficiency of 77.6 ± 1.3% and a partial current density of 250.8 ± 4.3 mA cm-2 for methanol during CO2ER in an MEA electrolyzer by coupling anodic oxygen evolution reaction with a full-cell energy efficiency achieving 29.1 ± 1.2% at 3.2 V. This work opens a new avenue to the control of C1 intermediates for CO2ER to methanol with high selectivity and activity in an MEA electrolyzer.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Copper-Based Catalysts for Electrochemical Carbon Dioxide Reduction to Multicarbon Products

Electrochemical conversion of carbon dioxide into fuel and chemicals with added value represents an appealing approach to reduce the greenhouse effect and realize a carbon-neutral cycle, which has great potential in mitigating global warming and effectively storing renewable energy. The electrochemical CO2 reduction reaction (CO2RR) usually involves multiproton coupling and multielectron transfer in aqueous electrolytes to form multicarbon products (C2+ products), but it competes with the hydrogen evolution reaction (HER), which results in intrinsically sluggish kinetics and a complex reaction mechanism and places higher requirements on the design of catalysts. In this review, the advantages of electrochemical CO2 reduction are briefly introduced, and then, different categories of Cu-based catalysts, including monometallic Cu catalysts, bimetallic catalysts, metal-organic frameworks (MOFs) along with MOF-derived catalysts and other catalysts, are summarized in terms of their synthesis method and conversion of CO2 to C2+ products in aqueous solution. The catalytic mechanisms of these catalysts are subsequently discussed for rational design of more efficient catalysts. In response to the mechanisms, several material strategies to enhance the catalytic behaviors are proposed, including surface facet engineering, interface engineering, utilization of strong metal-support interactions and surface modification. Based on the above strategies, challenges and prospects are proposed for the future development of CO2RR catalysts for industrial applications.

Graphical Abstract

Bridge Sites of Au Surfaces Are Active for Electrocatalytic CO2 Reduction

Prior in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) studies of electrochemical CO2 reduction catalyzed by Au, one of the most selective and active electrocatalysts to produce CO from CO2, suggest that the reaction proceeds solely on the top sites of the Au surface. This finding is worth updating with an improved spectroelectrochemical system where in situ IR measurements can be performed under real reaction conditions that yield high CO selectivity. Herein, we report the preparation of an Au-coated Si ATR crystal electrode with both high catalytic activity for CO2 reduction and strong surface enhancement of IR signals validated in the same spectroelectrochemical cell, which allows us to probe the adsorption and desorption behavior of bridge-bonded *CO species (*COB). We find that the Au surface restructures irreversibly to give an increased number of bridge sites for CO adsorption within the initial tens of seconds of CO2 reduction. By studying the potential-dependent desorption kinetics of *COB and quantifying the steady-state surface concentration of *COB under reaction conditions, we further show that *COB are active reaction intermediates for CO2 reduction to CO on this Au electrode. At medium overpotential, as high as 38% of the reaction occurs on the bridge sites.

Enhanced electrocatalytic reduction of CO2 to formate via doping Ce in Bi2O3 nanosheets

Formate is considered as the most economically viable product of the prevalent electrochemical CO₂ reduction (ECR) products. However, most of the catalysts for ECR to formate in aqueous solution often suffer from low activity and limited selectivity. Herein, we report a novel Ce-doped Bi₂O₃ nanosheet (NS) electrocatalyst by a facile solvothermal method for highly efficient ECR to formate. The 5.04% Ce-doped Bi₂O₃ NSs exhibited a current density of 37.4 mA cm^-2 for the production of formate with a high formate faradaic efficiency (FE) of 95.8% at -1.12 V. The formate FE was stably maintained at about 90% in a wide potential range from -0.82 to -1.22 V. More importantly, density functional theory (DFT) calculations revealed that Ce doping can lead to a significant synergistic effect, which promotes the formation and the adsorption of the OCHO* intermediate for ECR, while significantly inhibiting the hydrogen evolution reaction via depressing the formation of *H, thus helping achieve high current density and FE. This work provides an effective and promising strategy to develop efficient electrocatalysts with heteroatom doping and new insights for boosting ECR into formate.

One Pot-Synthesized Ag/Ag-Doped CeO2 Nanocomposite with Rich and Stable 3D Interfaces and Ce3+ for Efficient Carbon Dioxide Electroreduction

Electrochemical CO₂ reduction (ECR) technology is promising to produce value-added chemicals and alleviate the climate deterioration. Interface engineering is demonstrated to improve the ECR performance for metal and oxide composite catalysts. However, the approach to form a substantial interface is still limited. In this work, we report a facile one-pot coprecipitation method to synthetize novel silver and silver-doped ceria (Ag/CeO₂) nanocomposites. This catalyst provides a rich 3D interface and high Ce³⁺ concentration (33.6%), both of which are beneficial for ECR to CO. As a result, Ag/CeO₂ exhibits a 99% faradaic efficiency and 10.5 A g^-1 mass activity to convert CO₂ into CO at an overpotential of 0.83 V. The strong interfacial interaction between Ag and CeO₂ may enable the presence of surface Ce³⁺ and guarantee the improved durability during the electrolysis. We also develop numerical simulation to understand the local pH effect on the ECR performance and propose that the superior ECR performance of Ag/CeO₂ is mainly due to the accelerated CO formation rate rather than the suppressed hydrogen evolution reaction.

Atomically Dispersed Fe-Co Bimetallic Catalysts for the Promoted Electroreduction of Carbon Dioxide

The electroreduction reaction of CO₂ (ECO₂RR) requires high-performance catalysts to convert CO₂ into useful chemicals. Transition metal-based atomically dispersed catalysts are promising for the high selectivity and activity in ECO₂RR. This work presents a series of atomically dispersed Co, Fe bimetallic catalysts by carbonizing the Fe-introduced Co-zeolitic-imidazolate-framework (C-Fe-Co-ZIF) for the syngas generation from ECO₂RR. The synergistic effect of the bimetallic catalyst promotes CO production. Compared to the pure C-Co-ZIF, C-Fe-Co-ZIF facilitates CO production with a CO Faradaic efficiency (FE) boost of 10%, with optimal FE_CO of 51.9%, FE_H2 of 42.4% at - 0.55 V, and CO current density of 8.0 mA cm^-2 at - 0.7 V versus reversible hydrogen electrode (RHE). The H₂/CO ratio is tunable from 0.8 to 4.2 in a wide potential window of - 0.35 to - 0.8 V versus RHE. The total FE_CO+H2 maintains as high as 93% over 10 h. The proper adding amount of Fe could increase the number of active sites and create mild distortions for the nanoscopic environments of Co and Fe, which is essential for the enhancement of the CO production in ECO₂RR. The positive impacts of Cu-Co and Ni-Co bimetallic catalysts demonstrate the versatility and potential application of the bimetallic strategy for ECO₂RR.

Tracking structural evolution: operando regenerative CeOx/Bi interface structure for high-performance CO2 electroreduction

Unveiling the structural evolution and working mechanism of catalysts under realistic operating conditions is crucial for the design of efficient electrocatalysts for CO2 electroreduction, yet remains highly challenging. Here, by virtue of operando structural measurements at multiscale levels, it is identified under CO2 electroreduction conditions that an as-prepared CeO2/BiOCl precatalyst gradually evolves into CeOx/Bi interface structure with enriched Ce3+ species, which serves as the real catalytically active phase. The derived CeOx/Bi interface structure compared to pure Bi counterpart delivers substantially enhanced performance with a formate Faradaic efficiency approaching 90% for 24 hours in a wide potential window. The formate Faradaic efficiency can be further increased by using isotope D2O instead of H2O. Density functional theory calculations suggest that the regenerative CeOx/Bi interfacial sites can not only promote water activation to increase local *H species for CO2 protonation appropriately, but also stabilize the key intermediate *OCHO in formate pathway.

Electrocatalysis of gold-based nanoparticles and nanoclusters

Gold (Au)-based nanomaterials, including nanoparticles (NPs) and nanoclusters (NCs), have shown great potential in many electrocatalytic reactions due to their excellent catalytic ability and selectivity. In recent years, Au-based nanostructured materials have been considered as one of the most promising non-platinum (Pt) electrocatalysts. The controlled synthesis of Au-based NPs and NCs and the delicate microstructure adjustment play a vital role in regulating their catalytic activity toward various reactions. This review focuses on the latest progress in the synthesis of efficient Au-based NP and NC electrocatalysts, highlighting the relationship between Au nanostructures and their catalytic activity. This review first discusses the parameters of Au-based nanomaterials that determine their electrocatalytic performance, including composition, particle size and architecture. Subsequently, the latest electrocatalytic applications of Au-based NPs and NCs in various reactions are provided. Finally, some challenges and opportunities are highlighted, which will guide the rational design of Au-based NPs and NCs as promising electrocatalysts.

Nanometal Oxides with Special Surface Physicochemical Properties to Promote Electrochemical Detection of Heavy Metal Ions

Heavy metal ions (HMIs) are one of the major environmental pollution problems currently faced. To monitor and control HMIs, rapid and reliable detection is required. Electrochemical analysis is one of the promising methods for on-site detection and monitoring due to high sensitivity, short response time, etc. Recently, nanometal oxides with special surface physicochemical properties have been widely used as electrode modifiers to enhance sensitivity and selectivity for HMIs detection. In this work, recent advances in the electrochemical detection of HMIs using nanometal oxides, which are attributed to specific crystal facets and phases, surficial defects and vacancies, and oxidation state cycle, are comprehensively summarized and discussed in aspects of synthesis, characterization, electroanalysis application, and mechanism. Moreover, the challenges and opportunities for the development and application of nanometal oxides with functional surface physicochemical properties in electrochemical determination of HMIs are presented.

Highly Efficient Electroreduction of CO2 on Nickel Single-Atom Catalysts: Atom Trapping and Nitrogen Anchoring

Construction of single atom catalysts (SACs) with high activity toward electroreduction of CO₂ still remains a great challenge. A very simple and truly cost-effective synthetic strategy is proposed to prepare SACs via a impregnation-pyrolysis method, through one-step pyrolysis of graphene oxide aerogel. Compared with other traditional methods, this process is fast and free of repeated acid etching, and thus it has great potential for facile operation and large-scale manufacturing. Both X-ray absorption fine structure and high-angle annular dark-field scanning transmission electron microscopy images confirm the presence of isolated nickel atoms, with a high Ni loading of ≈2.6 wt%. The obtained 3D porous Ni- and N-codoped graphene aerogel exhibits excellent activity toward electroreduction of CO₂ to CO, in particular exhibiting a remarkable CO Faradaic efficiency of 90.2%. Density functional theory calculations reveal that free energies for the formation of intermediate *COOH on coordinatively unsaturated NiN sites are significantly lower than that on NiN₄ site, suggesting the outstanding activities of CO₂ electroreduction originate from coordinatively unsaturated NiN sites in catalysts.