ZIF-67-Derived 3D Hollow Mesoporous Crystalline Co3 O4 Wrapped by 2D g-C3 N4 Nanosheets for Photocatalytic Removal of Nitric Oxide

Micro-Spherical BiOI Photocatalysts for Efficient Degradation of Residual Xanthate and Gaseous Nitric Oxide

BiOI microspheres were synthesized using the solvothermal method for the degradation of residual xanthate and gaseous nitric oxide (NO) under visible light irradiation. The as-prepared BiOI nanomaterials were then characterized using various technologies, including XRD, FE-SEM, TEM, UV-Vis DRS, and XPS. The photodegradation results show that the removal efficiency of isobutyl sodium xanthate can reach 98.08% at an initial xanthate concentration of 120 mg/L; that of NO is as high as 96.36% at an inlet NO concentration of 11 ppm. Moreover, the effects of operational parameters such as catalyst dosage, initial xanthate concentration, and pH value of wastewater on the removal of xanthate were investigated. The results of scavenging tests and full-spectrum scanning indicate that ·O2- radicals are the main active species in xanthate degradation, and peroxide xanthate is an intermediate. The reusability of BiOI was explored through cyclic experiments. Furthermore, the reaction path and the mechanism of NO removal using BiOI were analyzed, and the main active species was also ·O2-. It is concluded that BiOI photocatalysts have high potential for wastewater treatment and waste gas clean-up in the mineral industry.

Novel Co3O4@TiO2@CdS@Au double-shelled nanocage for high-efficient photocatalysis removal of U(VI): Roles of spatial charges separation and photothermal effect

Effective spatial separation and utilization of photogenerated charges are critical for photocatalysis process. Herein, novel Co₃O₄ @TiO₂ @CdS@Au double-shelled nanocage (CTCA) with spatially separated redox centers was synthesized by loading Co₃O₄ and Au NP cocatalysts on the inner and outer surfaces of Z-scheme heterojunction (TiO₂ @CdS). The reduction rate constant of U(VI) by CTCA reached 0.218 min^-1 under simulated sunlight irradiation, which was 6.6, 3.2 and 36.3 times than that of monolayer CTCA (0.033 min^-1), CTC (0.068 min^-1) and CT (0.006 min^-1). The full-spectrum light-assisted photothermal catalytic performance can enable CTCA to remove 98.8% of U(VI) and degrade nearly 90% of five organic pollutants simultaneously. Detailed characterizations and theory calculations revealed that the photogenerated holes and electrons in CTCA flow inward and outward. More importantly, Co₃O₄ acts as a "nano heater" to generate the photothermal effect for further enhancing the charge transfer and accelerating the surface reaction kinetics. Meanwhile, the photogenerated electrons and superoxide radicals play a dominant role in reducing the adsorbed U(VI) to insoluble (UO₂)O₂·2H₂O(s). This work provides valuable input toward a novel double-shelled hollow nanocage reactor with excellent photothermal catalysis ability for efficient recovery U(VI) from uranium mine wastewater to address environmental contamination issues.

Recent advancements in zero- to three-dimensional carbon networks with a two-dimensional electrode material for high-performance supercapacitors

Supercapacitors have gained significant attention owing to their exceptional performance in terms of energy density and power density, making them suitable for various applications, such as mobile devices, electric vehicles, and renewable energy storage systems. This review focuses on recent advancements in the utilization of 0-dimensional to 3-dimensional carbon network materials as electrode materials for high-performance supercapacitor devices. This study aims to provide a comprehensive evaluation of the potential of carbon-based materials in enhancing the electrochemical performance of supercapacitors. The combination of these materials with other cutting-edge materials, such as Transition Metal Dichalcogenides (TMDs), MXenes, Layered Double Hydroxides (LDHs), graphitic carbon nitride (g-C₃N₄), Metal-Organic Frameworks (MOFs), Black Phosphorus (BP), and perovskite nanoarchitectures, has been extensively studied to achieve a wide operating potential window. The combination of these materials synchronizes their different charge-storage mechanisms to attain practical and realistic applications. The findings of this review indicate that hybrid composite electrodes with 3D structures exhibit the best potential in terms of overall electrochemical performance. However, this field faces several challenges and promising research directions. This study aimed to highlight these challenges and provide insights into the potential of carbon-based materials in supercapacitor applications.

Surface Modification of TiO2 by Hyper-Cross-Linked Polymers for Efficient Visible-Light-Driven Photocatalytic NO Oxidation

Solar-driven photocatalysis offers an environmentally friendly and sustainable approach for the removal of air pollutants such as nitric oxides without chemical addition. However, the low specific surface area and adsorption capacity of common photocatalysts restrict the surface reactions with NO at the ppb-level. In this study, imidazolium-based hyper-cross-linked polymer (IHP) was introduced to modify the surface of TiO₂ to construct a porous TiO₂/IHP composite photocatalyst. The as-prepared composite with hierarchical porous structure achieves a larger specific surface area as 309 m²/g than that of TiO₂ (119 m²/g). Meanwhile, the wide light absorption range of the polymer has brought about the strong visible-light absorption of the TiO₂/IHP composite. In consequence, the composite photocatalyst exhibits excellent performance toward NO oxidation at a low concentration of 600 ppb under visible-light irradiation, reaching a removal efficiency of 51.7%, while the generation of the toxic NO₂ intermediate was suppressed to less than 1 ppb. The enhanced NO adsorption and the suppressed NO₂ generation on the TiO₂/IHP surface were confirmed by in situ monitoring technology. This work demonstrates that the construction of a porous structure is an effective approach for efficient NO adsorption and photocatalytic oxidation.

Microwave-Assisted Rapid Substitution of Ti for Zr to Produce Bimetallic (Zr/Ti)UiO-66-NH2 with Congenetic "Shell-Core" Structure for Enhancing Photocatalytic Removal of Nitric Oxide

Efficient nitric oxide (NO) removal without nitrogen dioxide (NO₂ ) emission is desired for the control of air pollution. Herein, a series of (Zr/Ti)UiO-66-NH₂ with congenetic shell-core structure, denoted as Ti-UION, are rapidly synthesized by microwave-assisted post-synthetic modification for NO removal. The optimal Ti-UION (i.e., 2.5Ti-UION) exhibits the highest activity of 80.74% without NO₂ emission with moisture, which is 21.65% greater than that of the UiO-66-NH₂ . The NO removal efficiency of 2.5Ti-UION further increases to 95.92% without photocatalyst deactivation under an anhydrous condition. This is because selectively produced NO₂ in photocatalysis is completely adsorbed into micropores, refreshing active sites for subsequent reaction. In addition, the enhanced photocatalytic activity after Ti substitution is due to the presence of Ti electron acceptor, the potential difference between the shell and core of Ti-UION crystal, and the high conductivity of TiO units. Additionally, the improved adsorption of gas molecules not only favors NO oxidation, but also avoids the emission of NO₂ . This work provides a feasible strategy for rapid metal substitution in metal-organic frameworks and insights into enhanced NO photodegradation.

Amino-Functionalized Hierarchical Porous Carbon Derived from Zeolitic Imidazolate Frameworks for Ultrasensitive Electrochemical Sensing of Heavy Metals in Water

Electrochemical sensing provides a feasible avenue to monitor heavy metal ions (HMIs) in water, whereas the construction of highly sensitive and selective sensors remains challenging. Herein, we fabricated a novel amino-functionalized hierarchical porous carbon by the template-engaged method using ZIF-8 as the precursor and polystyrene sphere as the template, followed by carbonization and controllable chemical grafting of amino groups for efficient electrochemical detection of HMIs in water. The amino-functionalized hierarchical porous carbon features an ultrathin carbon framework with a high graphitization degree, excellent conductivity, unique macro-, meso-, and microporous architecture, and rich amino groups. As a result, the sensor exhibits prominent electrochemical performance with significantly low limits of detection for individual HMIs (i.e., 0.93 nM for Pb²⁺, 2.9 nM for Cu²⁺, and 1.2 nM for Hg²⁺) and simultaneous detection of HMIs (i.e., 0.62 nM for Pb²⁺, 1.8 nM for Cu²⁺, and 0.85 nM for Hg²⁺), which are superior to most reported sensors in the literature. Moreover, the sensor displays excellent anti-interference ability, repeatability, and stability for HMI detection in actual water samples.

Highly efficient flower-like ZnIn2S4/CoFe2O4 photocatalyst with p-n type heterojunction for enhanced hydrogen evolution under visible light irradiation

The construction of a p-n heterojunction structure is considered to be an effective method to improve the separation of electron-hole pairs in photocatalysts. A series of ZnIn₂S₄/CoFe₂O₄ (ZIS/CFO) photocatalysts with p-n heterojunctions were prepared via a method involving ultrasonication and calcination. The synthesized photocatalysts were tested and analyzed via various testing techniques, and their hydrogen evolution rates were evaluated. Compared with pure ZIS, ZIS/CFO with different mass ratios of CFO to ZIS showed improved photocatalytic hydrogen production performance, and the optimal photoactivity showed a nearly 12-fold increase, which can be attributed to the formation of p-n junctions and the formed internal electric field, accelerating the separation of electron-hole pairs and effectively improving the photocatalytic hydrogen evolution rate. The excellent stability of the ZIS/CFO composite was proven by three cycle experiments. In addition, the ZIS/CFO composite also possessed excellent magnetic properties to realize facial magnetic recoverability. This work paves the way for the design and preparation of magnetically recoverable p-n heterojunction photocatalysts.

Construction of Hollow Co3O4@ZnIn2S4 p-n Heterojunctions for Highly Efficient Photocatalytic Hydrogen Production

Photocatalysts derived from semiconductor heterojunctions for water splitting have bright prospects in solar energy conversion. Here, a Co₃O₄@ZIS p-n heterojunction was successfully created by developing two-dimensional ZnIn₂S₄ on ZIF-67-derived hollow Co₃O₄ nanocages, realizing efficient spatial separation of the electron-hole pair. Moreover, the black hollow structure of Co₃O₄ considerably increases the range of light absorption and the light utilization efficiency of the heterojunction avoids the agglomeration of ZnIn₂S₄ nanosheets and further improves the hydrogen generation rate of the material. The obtained Co₃O₄(20) @ZIS showed excellent photocatalytic H₂ activity of 5.38 mmol g^-1·h^-1 under simulated solar light, which was seven times more than that of pure ZnIn₂S₄. Therefore, these kinds of constructions of hollow p-n heterojunctions have a positive prospect in solar energy conversion fields.

The Growth of Extended Melem Units on g-C3N4 by Hydrothermal Treatment and Its Effect on Photocatalytic Activity of g-C3N4 for Photodegradation of Tetracycline Hydrochloride under Visible Light Irradiation

In this work, the growth of extended tri-s-triazine units (melem units) on g-C₃N₄ (CN) by hydrothermal treatment and its effect on the photodegradation efficiency of tetracycline hydrochloride (TC) is investigated. The CN-180-x and CN-200-6 samples were prepared using different hydrolysis times and temperatures, and they were characterized by multiple physicochemical techniques. In addition, their photodegradation performance was evaluated under visible light irradiation. Compared to the CN, CN-180-6 possesses remarkable photocatalytic degradation efficiency at 97.17% towards TC removal in an aqueous solution. The high visible-light-induced photo-reactivity of CN-180-6 directly correlates to charge transfer efficiency, numerous structural defects with a high specific surface area (75.0 m² g^-1), and sufficient O-functional groups over g-C₃N₄. However, hydrothermal treatment at a higher temperature or during a longer time additionally induces the growth of extended melem units on the surface of g-C₃N₄, resulting in the inhibition of the charge transfer. In addition, the superoxide radical is proven to be generated from photoexcited reaction and plays a key role in the TC degradation.

Enhancing Built-in Electric Field via Molecular Dipole Control in Conjugated Microporous Polymers for Boosting Charge Separation

The built-in electric field (BEF) has been considered as the key kinetic factor for facilitating efficient photoinduced carrier separation and migration of polymeric photocatalysts. Enhancing the BEF of the polymers could enable a directional migration of the photogenerated carriers to accelerate photogenerated charge separation and thus boost photocatalytic performances. However, achieving this approach remains a formidable challenge, which has never been realized in conjugated microporous polymers (CMPs). Herein, we developed a molecular dipole control strategy to modulate the BEF in CMPs by varying the nature of the core. As a result, a series of CMPs with a tunable BEF were designed and prepared via FeCl₃-mediated coupling of bicarbazole with different acceptor cores. The optimized CbzCMP-9 featured the strongest BEF induced by its high molecular dipole, which grants it with a powerful driving force to accelerate exciton dissociation into electron-hole pairs and facilitates charge transfer along the backbone of CMPs to the surface, resulting in a remarkable photocatalytic performance toward thiocyano chromones and C-3 thiocyanation of indoles (up to 95 and 98% yields, respectively) and prominently surpassing many other reported photocatalysts. In brief, the proposed strategy highlights that enhancing the BEF by modulating molecular dipole can lead to a dramatic improvement in photocatalytic performance, which is expected to be employed for constructing other photocatalytic systems with high performance.

Co3O4 modified polymeric carbon nitride for external light-free chlorine activating degradation of organic pollutants

Advanced oxidation processes (AOPs) activated by chlorine have emerged as a green and efficient strategy for water treatment and have attracted widespread attention. However, most of them require continuous UV radiation during the degradation reaction, which increases the cost and is not conducive to practical application, in some ways. Hererin we proposed an external light-free chlorine activation methodology for the removal of organic pollutants with the assistance of the intrinsic chemiluminescence (CL) in the system. A very interesting phenomenon, 20-fold enhanced CL of Co₃O₄ nanoparticles modified polymeric carbon nitride (PCN/Co₃O₄) was observed in the presence of hypochlorous acid (HClO), compared with the pristine PCN nanosheets. Without ultraviolet (UV), even any other light-emitting devices, the strong intrinsic CL in the PCN/Co₃O₄-HClO system was found to be conducive to chlorine activation degradation of organic pollutants. The inner connection between the CL of the PCN/Co₃O₄-HClO system and the chlorine-based AOPs was further explored.

Singlet Oxygen and Mobile Hydroxyl Radicals Co-operating on Gas-Solid Catalytic Reaction Interfaces for Deeply Oxidizing NOx

Learning from the important role of porphyrin-based chromophores in natural photosynthesis, a bionic photocatalytic system based on tetrakis (4-carboxyphenyl) porphyrin-coupled TiO₂ was designed for photo-induced treating low-concentration NO_x indoor gas (550 parts per billion), achieving a high NO removal rate of 91% and a long stability under visible-light (λ ≥ 420 nm) irradiation. Besides the great contribution of the conventional ^•O₂^- reactive species, a synergic effect between a singlet oxygen (¹O₂) and mobile hydroxyl radicals (^•OH_f) was first illustrated for removing NO_x indoor gas (¹O₂ + 2NO → 2NO₂, NO₂ + ^•OH_f → HNO₃), inhibiting the production of the byproducts of NO₂. This work is helpful for understanding the surface mechanism of photocatalytic NO_x oxidation and provides a new perspective for the development of highly efficient air purification systems.

Engineering Sulfur Vacancies in Spinel-Phase Co3S4 for Effective Electrocatalysis of the Oxygen Evolution Reaction

Restricted by the sluggish kinetics of the oxygen evolution reaction (OER), efficient OER catalysis remains a challenge. Here, a facile strategy was proposed to prepare a hollow dodecahedron constructed by vacancy-rich spinel Co₃S₄ nanoparticles in a self-generated H₂S atmosphere of thiourea. The morphology, composition, and electronic structure, especially the sulfur vacancy, of the cobalt sulfides can be regulated by the dose of thiourea. Benefitting from the H₂S atmosphere, the anion exchange process and vacancy introduction can be accomplished simultaneously. The resulting catalyst exhibits excellent catalytic activity for the OER with a low overpotential of 270 mV to reach a current density of 10 mA cm^-2 and a small Tafel slope of 59 mV dec^-1. Combined with various characterizations and electrochemical tests, the as-proposed defect engineering method could delocalize cobalt neighboring electrons and expose more Co²⁺ sites in spinel Co₃S₄, which lowers the charge transfer resistance and facilitates the formation of Co³⁺ active sites during the preactivation process. This work paves a new way for the rational design of vacancy-enriched transition metal-based catalysts toward an efficient OER.

Hydrophilic polypyrrole and g-C3N4 co-decorated ZnO nanorod arrays for stable and efficient photoelectrochemical water splitting

Hydrophilic polypyrrole and g-C3N4 co-decorated ZnO nanorod arrays were synthesized for stable and efficient photoelectrochemical water splitting.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

Green and efficient synthesis of Co-MOF-based/g-C3N4 composite catalysts to activate peroxymonosulfate for degradation of the antidepressant venlafaxine

Based on single metal-organic framework (MOF) composite catalyst ZIF-67/g-C₃N₄ (ZG), the composite catalysts ZIF-67/MOF-74(Ni)/g-C₃N₄ (ZNG) and ZIF-67/MIL-100(Fe)/g-C₃N₄ (ZMG) with double MOFs were synthesized, used to effectively activate peroxymonosulfate (PMS) for degrade venlafaxine (VEN). Various characterization methods (XRD, FT-IR, Raman, SEM, EDS, TEM and TG) showed that ZIF-67 and g-C₃N₄; ZIF-67, MOF-74(Ni) and g-C₃N₄; as well as ZIF-67, MIL-100(Fe) and g-C₃N₄ successfully formed heterostructures. The series of catalytic degradation results showed that within 120 min, the degradation rate of VEN by ZMG achieved 100% and the mineralization rate reached 51.32%. The removal rate of VEN by ZNG was 91.38%, while that by ZG was only 27.75%. Free radical quenching tests and EPR further confirmed the production of OH and SO₄^-, which could be conducive to the degradation of VEN. The mechanism analysis of PMS activation confirmed that the interaction of Fe²⁺/Co³⁺ was stronger than that of Ni²⁺/Co³⁺, and it was an important driving force to significantly enhance the synergistic effect. Finally, Gauss theory calculation and HPLC-MS/MS were used to analyze the intermediate products of VEN. It was verified that the main chemical reactions in the degradation process of VEN were hydroxylation, dehydration, demethylation and tertiary amine substitution.

Direct Z-scheme SiNWs@Co3O4 photocathode with a cocatalyst of sludge-derived carbon quantum dots for efficient photoelectrochemical hydrogen production

Solar driven photoelectrochemical (PEC) hydrogen production has attracted considerable attention, but the design of highly efficient, robust and low-cost photocathode still remains a significant challenge. Herein, we report a novel SiNWs@Co₃O₄Z-scheme heterojunction photocathode with carbon quantum dots eco-friendly derived from sludge (SCQDs) as the co-catalyst. The photocathode not only leads to effective separation of electron-hole pair, lower transmission resistance, and longer lifetime of charge carriers, but also elevates the stability by preventing direct contact between the SiNWs and the electrolyte as well as the self-oxidation. Simultaneously, the excellent electron transport properties of the SCQDs further improved the PEC performance. Correspondingly, a maximum current density of 14.88 mA·cm^-2 was obtained at -0.67 V with the applied bias photon-to-current efficiency (ABPE) achieving 8.4% under visible light irradiations at pH = 7. This work provides a promising scheme for Si-based photocathodes for PEC hydrogen production with a high performance, reliable stability, and low-cost.

Carbon Dot-Doped Titanium Dioxide Sheets for the Efficient Photocatalytic Performance of Refractory Pollutants

Broad solar light harvesting and fast photoinduced electron-hole migration are two critical factors for the catalytic capacity of photocatalytic system. In this study, novel visible light-driven carbon dot-TiO₂ nanosheet (CD-TN) photocatalysts are successfully prepared by loading CDs on the surface of TNs through the hydrothermal method. The microstructure, chemical components, and optical properties of the prepared samples are characterized via X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, UV-visible diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy analysis. Congo red (CR), rhodamine B (RhB), and tetracycline (TC) are selected as pollutants to assess the catalytic performance of CD-TNs. As expected, the removal efficiencies of CD-TNs for CR, RhB, and TC are 94.6% (120 min), 97.2% (150 min), and 96.1% (60 min), respectively, obviously higher than that of pure TNs. The enhanced degradation efficiency of CD-TNs is predominantly ascribed to the merits of CDs (excellent up-conversion property and electron transfer property). Moreover, according to the several degradation cycles, CD-TNs possess the excellent stability, having removed 93.3% of CR after 120 min irradiation.

High-Efficiency Wastewater Purification System Based on Coupled Photoelectric-Catalytic Action Provided by Triboelectric Nanogenerator

It is of great importance to explore a creative route to improve the degradation efficiency of organic pollutants in wastewater. Herein, we construct a unique hybrid system by combining self-powered triboelectric nanogenerator (TENG) with carbon dots-TiO₂ sheets doped three-dimensional graphene oxide photocatalyst (3DGA@CDs-TNs), which can significantly enhance the degradation efficiency of brilliant green (BG) and direct blue 5B (DB) owing to the powerful interaction of TENG and 3DGA@CDs-TNs photocatalyst. The power output of TENG can be applied for wastewater purification directly, which exhibits a self-powered electrocatalytic technology. Furthermore, the results also verify that TENG can replace conventional electric catalyst to remove pollutants effectively from wastewater without any consumption. Subsequently, the unstable fragments and the plausible removal pathways of the two pollutants are proposed. Our work sheds light on the development of efficient and sustainable TENG/photocatalyst system, opening up new opportunities and possibilities for comprehensive utilization of random energy.

Amorphous Co3O4 quantum dots hybridizing with 3D hexagonal CdS single crystals to construct a 0D/3D p-n heterojunction for a highly efficient photocatalytic H2 evolution

Herein, a novel amorphous monodisperse Co3O4 quantum dots/3D hexagonal CdS single crystals (0D/3D Co3O4 QDs/CdS) p-n heterojunction was constructed by a simple hydrothermal and electrostatic self-assembly method. The amorphous monodispersed Co3O4 QDs (≈4.5 nm) are uniformly and tightly attached to the surface of the hexagonal CdS single crystals. The sample, 0.5% CQDs/CdS exhibits outstanding hydrogen evolution activity of 17.5 mmol h-1 g-1 with a turnover number (TON) of 4214, up to 10.3 times higher than that of pure CdS. The enhanced photocatalytic activity can be attributed to the synergistic effect of the p-n heterostructure and the quantum confinement effect of Co3O4 QDs, which significantly promoted the separation efficiency of photo-generated electrons and holes. Additionally, the sulfur vacancy also can act as electron trappers to improve carrier separation and electron transfer. The photoelectrochemical and time-resolved fluorescence (TRPL) results further certify the effective spatial charge separation. This work gives an insight into the design of the 0D/3D Co3O4 QDs/CdS p-n heterostructure for a highly efficient photocatalysis.

CdSe 1D/2D Mixed-Dimensional Heterostructures: Curvature-Complementary Self-Assembly for Enhanced Visible-Light Photocatalysis

Mixed-dimensional heterostructures (MDHs), which combine nanomaterials of different dimensionalities deliver on the promise to bypass intrinsic limitations of a given low-dimensional material. Here, a strategy to engineer MDHs between two low-dimensional materials by curvature-complementary self-assembly is described. CdSe nanotubes rolled from 2D nanosheets and 1D CdSe nanorods, with negative and positive curvatures, respectively, are selected to illustrate complementary curvature self-assembly. The assembly process, optical, and photoelectrical properties of the CdSe MDHs are thoroughly investigated. Several remarkable features of CdSe MDHs, including increased light absorption, efficient charge separation, and appropriate bandgap structure are confirmed. The MDHs significantly alleviate the sluggish kinetics of electron transfer in the quantum sized CdSe subunits (onset potential of 0.21 V vs RHE for MDHs; 0.4 V lower than their low-dimensional building blocks), while the spatial nano-confinement effect in the CdSe MDHs also assists the interfacial reaction kinetics to render them ideal photocatalysts for benzylamine oxidation (conversion > 99% in 4 h with a two times higher rate than simple mixtures). The results highlight opportunities for building MDHs from low-dimensional building blocks with curvature-complementary features and expand the application spectrum of low dimensional materials in artificial photosynthesis.

Zeolitic imidazolate frameworks as intrinsic light harvesting and charge separation materials for photocatalysis

Zeolitic imidazolate frameworks (ZIFs) are a subclass of metal organic frameworks that have attracted considerable attention in the past years and have found many applications including heterogeneous catalysis due to their highly ordered porous structure, large surface area, and structural flexibility. However, ZIFs are largely utilized as simple hosts or passive media for dispersing other catalytically active species, resembling the roles of zeolites in catalysis. In contrast, our recent findings show that ZIFs not only have broad absorption across the UV-visible and near IR spectral region but also have an exceptionally long-lived excited charge separated state, suggesting that ZIFs may be used as intrinsic light harvesting and photocatalytic materials rather than as inert hosts. This Perspective will focus on the recent progress on the fundamental studies of the intrinsic light absorption, charge separation, and photocatalytic properties of ZIFs and will discuss the outlook for future development.

Self-Assembly of Nanosheet-Supported Fe-MOF Heterocrystals as a Reusable Catalyst for Boosting Advanced Oxidation Performance via Radical and Nonradical Pathways

Heterojunction catalysts have drawn increasing interest for the visible light-driven Fenton reaction and bring tremendous opportunities for environmental remediation. Herein, a BiOI/MIL-53(Fe) Z-scheme heterojunction (named BMFe) was synthesized for the first time via a facile strategy. Compared with pristine BiOI and MIL-53(Fe) catalysts, the two-dimensional/three-dimensional (2D/3D) heterojunction catalyst manifested remarkable catalytic performance toward degradation of phenol, bisphenol A, methylene blue, and carbamazepine, which is attributed mainly to the interfacial integration and efficient charge separation. By virtue of coupling at the interface, as confirmed by XPS, ⁵⁷Fe Mössbauer spectroscopy, and DFT calculations, the BMFe catalyst promoted the transfer of electron-hole pairs via Z-scheme and improved the chemical activation of hydrogen peroxide. The subsequent holes, free radicals, and nonradicals can effectively and continuously decompose pollutants, achieving a positive synergistic effect between photocatalysis and Fenton reactions. Simultaneously, the specially designed BiOX(X = Br, Cl)/MIL-53(Fe) and BiOI/Fe-MOFs(MIL-101, MIL-88) heterojunctions also exhibited advanced oxidative capacity for organic pollutants. Given their practical value for industrial applications, BMFe beads (1.0 ± 0.15 mm) synthesized via a blend cross-linking method can significantly advance long-term stability and recyclability. The integration of Fe-based metal-organic frameworks with bismuth oxyhalide semiconductors provides a new perspective on developing heterojunction catalysts for environmental remediation.

Central-collapsed structure of CoFeAl layered double hydroxides and its photocatalytic performance

Layered double hydroxides (LDHs) has been regarded as one of the most potential photocatalysts for degradation of the pollutants, due to the tunable elements in the laminates, high surface area and exposed active sites. Developing a photocatalyst with a visible light activity and fast charge separation efficiency is a main research focus. In this work, a central-collapsed CoFeAl-LDHs was formed via the selective etching Al³⁺ in the laminates, which relied on the function of OH^- produced by urea hydrolysis. The Central-collapsed structure of CoFeAl-LDHs exhibited enhanced adsorption activity and photocatalytic efficiency. The results show that the pseudo-second-order kinetic model and the Langmuir model are suitable for adsorption behavior. This etching cavity is beneficial to the adsorption of MB and provides a better platform for the direct interaction between MB and CoFeAl-LDHs. The morphology and photoelectrochemical properties of the central-collapsed structure of LDHs were characterized and used to explore the relationship between the etching degree and photocatalytic activity. The photocatalytic properties of all the samples under visible light irradiation were evaluated, and LDH-6 has the best photocatalytic activity. This work provides a novel approach for the fabrication of central-collapsed structure of layered double hydroxides photocatalysts to meet environmental and energy requirements.

Rational design of the Z-scheme hollow-structure Co9S8/g-C3N4 as an efficient visible-light photocatalyst for tetracycline degradation

The development of photocatalysts with high catalytic activity that are capable of full utilization of solar energy is a challenge in the field of photocatalysis. Accordingly, in the present study, an efficient Z-scheme cage-structured Co₉S₈/g-C₃N₄ (c-CSCN) photocatalyst was constructed for the degradation of tetracycline antibiotics under visible-light irradiation. The Z-scheme charge-transfer mechanism accelerates the separation of photogenerated charge carriers and effectively improves photocatalytic activity. Moreover, c-CSCN has a hollow structure, allowing light to be reflected multiple times inside the cavity, thereby effectively improving the utilisation efficiency of solar energy. As a result, the photocatalytic activity of c-CSCN is 1.5-, 2.5-, and 5.8-times higher than those of sheet-type Co₉S₈/g-C₃N₄ (s-CSCN), c-Co₉S₈, and g-C₃N₄, respectively, for the degradation of tetracycline. c-CSCN maintains favourable photocatalytic activity over five consecutive degradation cycles, demonstrating its excellent stability. In addition, c-CSCN performs efficient tetracycline removal in different water substrates. Moreover, c-CSCN exhibits excellent ability to remove tetracycline under direct natural sunlight. This work fully demonstrates that c-CSCN has high catalytic activity and the potential for practical application as a wastewater treatment material.

CuS QDs/Co3O4 Polyhedra-Driven Multiple Signal Amplifications Activated h-BN Photoeletrochemical Biosensing Platform

Herein, we developed an unmodified hexagonal boron nitride (h-BN) photoelectrochemical (PEC) biosensing platform with a low background signal and high sensitivity based on CuS quantum dots (QDs)/Co₃O₄ polyhedra-driven multiple signal amplifications. The prepared porous h-BN nanosheets with large specific surface areas, as the photoelectric substrate material, can provide extensive active reaction sites. Meanwhile, the CuS QDs/Co₃O₄ polyhedra were synthesized by the zeolitic imidazolate framework (ZIF-67) and utilized as a multiple signal amplifier, which can not only drive the p-n semiconductor quenching effect to compete with the h-BN photoelectrode for the consumption of electron donors and exciting light but also trigger a mimetic enzymatic catalytic precipitation effect to inhibit electron transfer. The quenching ability and peroxidase-like activity of CuS QDs/Co₃O₄ polyhedra were evaluated to prove its superiority, and the possible mechanisms of electron transfer and enzymatic catalytic were further analyzed in detail. The developed PEC biosensing platform for the chlorpyrifos assay presented outstanding performance with a wide linear range from 1 × 10^-1 to 1 × 10⁷ ng mL^-1 and a low detection limit of 0.34 pg mL^-1 and exhibited excellent selectivity, reproducibility, and stability. In addition, the CuS QDs/Co₃O₄ polyhedra-activated h-BN PEC biosensing platform may exhibit universality for various analytes via replacing the corresponding target aptamer sequence. This work provides a remarkable inspiration and valuable reference for the development of the PEC biosensor, and the signal amplifier-enabled unmodified PEC biosensing platform strategy has a bright application in early safety warning, bioanalysis and clinical diagnosis.

Bimetallic MOF Nanosheets Decorated on Electrospun Nanofibers for High-Performance Asymmetric Supercapacitors

The rational design of metal-organic framework (MOF)-based materials with a huge specific surface area, high redox activity, and favorable conductivity is currently a hot subject for their potential usage in supercapacitor electrodes. Herein, novel bimetallic MOFs with a flowerlike nanosheet structure grown on the electrospun nanofibers (PPNF@M-Ni MOF, M = Co, Zn, Cu, Fe) have been prepared by controlling the incorporation of various types of metal ions, which display superior electrochemical performance. For example, PPNF@Co-Ni MOF possesses a large specific capacitance of 1096.2 F g^-1 (specific capacity of 548.1 C g^-1) at 1 A g^-1 and excellent rate performance. In addition, an asymmetric solid-state device composed of PPNF@Co-Ni MOF (positive materials) and KOH-activated carbon nanofibers embedded with reduced graphene oxide (negative materials) reaches a maximum energy density of 93.6 Wh kg^-1 at the power density of 1600.0 W kg^-1 and long cycling life. This work may greatly advance the research toward the design of supported MOF-based electrode materials for a promising prospect in energy conversion and storage.

Recent Innovation of Metal-Organic Frameworks for Carbon Dioxide Photocatalytic Reduction

The accumulation of carbon dioxide (CO2) pollutants in the atmosphere begets global warming, forcing us to face tangible catastrophes worldwide. Environmental affability, affordability, and efficient CO2 metamorphotic capacity are critical factors for photocatalysts; metal-organic frameworks (MOFs) are one of the best candidates. MOFs, as hybrid organic ligand and inorganic nodal metal with tailorable morphological texture and adaptable electronic structure, are contemporary artificial photocatalysts. The semiconducting nature and porous topology of MOFs, respectively, assists with photogenerated multi-exciton injection and adsorption of substrate proximate to void cavities, thereby converting CO2. The vitality of the employment of MOFs in CO2 photolytic reaction has emerged from the fact that they are not only an inherently eco-friendly weapon for pollutant extermination, but also a potential tool for alleviating foreseeable fuel crises. The excellent synergistic interaction between the central metal and organic linker allows decisive implementation for the design, integration, and application of the catalytic bundle. In this review, we presented recent MOF headway focusing on reports of the last three years, exhaustively categorized based on central metal-type, and novel discussion, from material preparation to photocatalytic, simulated performance recordings of respective as-synthesized materials. The selective CO2 reduction capacities into syngas or formate of standalone or composite MOFs with definite photocatalytic reaction conditions was considered and compared.