Oxygen Vacancy-Engineered PEGylated MoO3-x Nanoparticles with Superior Sulfite Oxidase Mimetic Activity for Vitamin B1 Detection

Ultrasensitive triethylamine gas sensors with ZnSe nanospheres/nest-like Cr-doped MoO3

Developing high-sensitivity TEA sensors has extremely important significance for human health. Design of three-dimensional (3D) nanostructures assembled from one-dimensional nanomaterials can effectively improve sensing performance. In this work, a nest-like structure assembled by Cr-doped MoO3 (Cr-MoO3) nanorods with relatively higher specific surface area was prepared. In order to improve the sensing performance, Cr-MoO3 skeleton was combined with ZnSe nanospheres of different mass ratios as sensing materials (ZnSe/Cr-MoO3), and the successful construction of the heterojunction structure was supported by various spectroscopies and charge density calculation. The prepared composite with an optimal moiety ratio showed very high response values of 371 and 1301 for 10 ppm and 50 ppm for TEA at 200 °C, respectively. Simultaneously, the composite sensor also exhibited a low detection limit (1.7 ppb). The improvement of the sensing performance of ZnSe/Cr-MoO3 was attributed to the formation of oxygen vacancies induced by Cr doping, the 3D nest-like structure provided an efficient network for charge transport/collection and the n-n heterojunctions between Cr-MoO3 nanorods and ZnSe nanospheres. The simulation analysis based on density functional theory (DFT) calculations indicated that the heterojunctions could effectively enhance the adsorption energy of TEA and the more charges transferring from TEA to the Cr-MoO3 nanorods.

Nanomaterials with Enzyme-like Properties for Combatting Foodborne Pathogen Infections: Classifications, Mechanisms, and Applications in Food Preservation

During the transportation and storage of food, foodborne spoilage caused by bacterial and biofilm infection is prone to occur, leading to issues such as short shelf life, economic loss, and sensory quality instability. Therefore, the development of novel and efficient antibacterial agents capable of efficiently inhibiting bacteria throughout various stages of food processing, transportation, and storage is strongly recommended by researchers. The emergence of nanozymes is considered to be an effective candidate for inhibiting foodborne bacteria agents in the food industry. As potent antibacterial agents, nanozymes have the advantages of low cost, high stability, strong broad-spectrum antibacterial ability, and biocompatibility. Herein, we aim to summarize the classification status of various nanozymes. Furthermore, the general catalytic bacteriostatic mechanism of nanozymes against intracellular bacteria, planktonic bacteria, and biofilm activities are highlighted, mainly concerning the destruction of cell walls and/or membranes, reactive oxygen species regulation, HOBr/Cl generation, damage of intracellular components, and so forth. In particular, the review focuses on the pivotal role of nanozymes as antibacterial agents and delivery vehicles in the fields of food preservation applications. We look forward to the future prospects, especially in the field of food preservation, to promote broader applications based on antimicrobial nanozymes.

Several lines of antioxidant defense against oxidative stress: antioxidant enzymes, nanomaterials with multiple enzyme-mimicking activities, and low-molecular-weight antioxidants

Reactive oxygen species (ROS) and reactive nitrogen species (RNS) are well recognized for playing a dual role, since they can be either deleterious or beneficial to biological systems. An imbalance between ROS production and elimination is termed oxidative stress, a critical factor and common denominator of many chronic diseases such as cancer, cardiovascular diseases, metabolic diseases, neurological disorders (Alzheimer's and Parkinson's diseases), and other disorders. To counteract the harmful effects of ROS, organisms have evolved a complex, three-line antioxidant defense system. The first-line defense mechanism is the most efficient and involves antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPx). This line of defense plays an irreplaceable role in the dismutation of superoxide radicals (O2•-) and hydrogen peroxide (H2O2). The removal of superoxide radicals by SOD prevents the formation of the much more damaging peroxynitrite ONOO- (O2•-  + NO• → ONOO-) and maintains the physiologically relevant level of nitric oxide (NO•), an important molecule in neurotransmission, inflammation, and vasodilation. The second-line antioxidant defense pathway involves exogenous diet-derived small-molecule antioxidants. The third-line antioxidant defense is ensured by the repair or removal of oxidized proteins and other biomolecules by a variety of enzyme systems. This review briefly discusses the endogenous (mitochondria, NADPH, xanthine oxidase (XO), Fenton reaction) and exogenous (e.g., smoking, radiation, drugs, pollution) sources of ROS (superoxide radical, hydrogen peroxide, hydroxyl radical, peroxyl radical, hypochlorous acid, peroxynitrite). Attention has been given to the first-line antioxidant defense system provided by SOD, CAT, and GPx. The chemical and molecular mechanisms of antioxidant enzymes, enzyme-related diseases (cancer, cardiovascular, lung, metabolic, and neurological diseases), and the role of enzymes (e.g., GPx4) in cellular processes such as ferroptosis are discussed. Potential therapeutic applications of enzyme mimics and recent progress in metal-based (copper, iron, cobalt, molybdenum, cerium) and nonmetal (carbon)-based nanomaterials with enzyme-like activities (nanozymes) are also discussed. Moreover, attention has been given to the mechanisms of action of low-molecular-weight antioxidants (vitamin C (ascorbate), vitamin E (alpha-tocopherol), carotenoids (e.g., β-carotene, lycopene, lutein), flavonoids (e.g., quercetin, anthocyanins, epicatechin), and glutathione (GSH)), the activation of transcription factors such as Nrf2, and the protection against chronic diseases. Given that there is a discrepancy between preclinical and clinical studies, approaches that may result in greater pharmacological and clinical success of low-molecular-weight antioxidant therapies are also subject to discussion.

Neuromodulation by nanozymes and ultrasound during Alzheimer's disease management

Alzheimer's disease (AD) is a neurodegenerative disorder with complex pathogenesis and effective clinical treatment strategies for this disease remain elusive. Interestingly, nanomedicines are under extensive investigation for AD management. Currently, existing redox molecules show highly bioactive property but suffer from instability and high production costs, limiting clinical application for neurological diseases. Compared with natural enzymes, artificial enzymes show high stability, long-lasting catalytic activity, and versatile enzyme-like properties. Further, the selectivity and performance of artificial enzymes can be modulated for neuroinflammation treatments through external stimuli. In this review, we focus on the latest developments of metal, metal oxide, carbon-based and polymer based nanozymes and their catalytic mechanisms. Recent developments in nanozymes for diagnosing and treating AD are emphasized, especially focusing on their potential to regulate pathogenic factors and target sites. Various applications of nanozymes with different stimuli-responsive features were discussed, particularly focusing on nanozymes for treating oxidative stress-related neurological diseases. Noninvasiveness and focused application to deep body regions makes ultrasound (US) an attractive trigger mechanism for nanomedicine. Since a complete cure for AD remains distant, this review outlines the potential of US responsive nanozymes to develop future therapeutic approaches for this chronic neurodegenerative disease and its emergence in AD management.

Deep Insight of Design, Mechanism, and Cancer Theranostic Strategy of Nanozymes

Since the discovery of enzyme-like activity of Fe3O4 nanoparticles in 2007, nanozymes are becoming the promising substitutes for natural enzymes due to their advantages of high catalytic activity, low cost, mild reaction conditions, good stability, and suitable for large-scale production. Recently, with the cross fusion of nanomedicine and nanocatalysis, nanozyme-based theranostic strategies attract great attention, since the enzymatic reactions can be triggered in the tumor microenvironment to achieve good curative effect with substrate specificity and low side effects. Thus, various nanozymes have been developed and used for tumor therapy. In this review, more than 270 research articles are discussed systematically to present progress in the past five years. First, the discovery and development of nanozymes are summarized. Second, classification and catalytic mechanism of nanozymes are discussed. Third, activity prediction and rational design of nanozymes are focused by highlighting the methods of density functional theory, machine learning, biomimetic and chemical design. Then, synergistic theranostic strategy of nanozymes are introduced. Finally, current challenges and future prospects of nanozymes used for tumor theranostic are outlined, including selectivity, biosafety, repeatability and stability, in-depth catalytic mechanism, predicting and evaluating activities.

The mechanism of nanozyme activity of ZnO-Co3O4-v: Oxygen vacancy dynamic change and bilayer electron transfer pathway for wound healing and virtual reality revealing

Since the catalyst's surface was the major active location, the inner structure's contribution to catalytic activity was typically overlooked. Here, ZnO-Co3O4-v nanozymes with several surfaces and bulk oxygen vacancies were created. The O atoms of H2O2 moved inward to preferentially fill the oxygen vacancies in the interior and form new "lattice oxygen" by the X-ray photoelectron spectroscopy depth analysis and X-ray absorption fine structure. The internal Co2+ continually transferred electrons to the surface for a continuous catalytic reaction, which generated a significant amount of reactive oxygen species. Inner and outer double-layer electron cycles accompanied this process. A three-dimensional model of ZnO-Co3O4-v was constructed using virtual reality interactive modelling technology to illustrate nanozyme catalysis. Moreover, the bactericidal rate of ZnO-Co3O4-v for Methionine-resistant Staphylococcus aureus and Multiple drug resistant Escherichia coli was as high as 99%. ZnO-Co3O4-v was biocompatible and might be utilized to heal wounds following Methionine-resistant Staphylococcus aureus infection. This work offered a new idea for nanozymes to replace of conventional antibacterial medications.

Nanozyme Rich in Oxygen Vacancies Derived from Mn-Based Metal-Organic Gel for the Determination of Alkaline Phosphatase

Vacancy engineering as an effective strategy has been widely employed to regulate the enzyme-mimic activity of nanomaterials by adjusting the surface, electronic structure, and creating more active sites. Herein, we purposed a facile and simple method to acquire transition metal manganese oxide rich in oxygen vacancies (OVs-Mn2O3-400) by pyrolyzing the precursor of the Mn(II)-based metal-organic gel directly. The as-prepared OVs-Mn2O3-400 exhibited superior oxidase-like activity as oxygen vacancies participated in the generation of O2•-. Besides, steady state kinetic constant (Km) and catalytic kinetic constant (Ea) suggested that OVs-Mn2O3-400 had a stronger affinity toward 3,3',5,5'-tetramethylbenzidine and possessed prominent catalytic performance. By taking 2-phospho-l-ascorbic acid as the substrate, which can be converted into reducing substance ascorbic acid in the presence of alkaline phosphatase (ALP), OVs-Mn2O3-400 can be applied as an efficient nanozyme for ALP colorimetric analysis without the help of destructive H2O2. The colorimetric sensor established by OVs-Mn2O3-400 for ALP detection showed a good linearity from 0.1 to 12 U/L and a lower limit of detection of 0.054 U/L. Our work paves the way for designing enhanced enzyme-like activity nanozymes, which is of significance in biosensing.

Oxygen vacancies-dominated reactive species generation from peroxymonosulfate activated by MoO3-x for pollutant degradation

Interface oxygen vacancies (OVs) are commonly used to improve the catalytic performance of activators in persulfate-based advanced oxidation processes, but the underlying mechanism was not fully explored. This work reports a facile heat treatment method to regulate OVs in MoO_3-x to elucidate the mechanism of peroxymonosulfate (PMS) activated by OVs to degrade 2,4,4-Trichlorobiphenyl (PCB28). Electron spin resonance, free radical quenching, X-ray photoelectron spectroscopy, and Raman spectroscopy confirmed that both reducing Mo species and OVs of MoO_3-x surface were responsible for PMS activation. Further experiments and Density Function Theory (DFT) calculation suggest that OVs in MoO_3-x induced the formation of superoxide radical (O₂^•-), and then O₂^•- was transformed into singlet oxygen (¹O₂) or mediated PMS activation to generate radicals, which contritbued to 70.2% of PCB28 degradation. The steady-state concentrations of free radical calculated with the kinetics model show that OVs were more favorable to mediate PMS to generate hydroxyl radicals (^•OH) under oxic conditions, while reducing Mo species would like to induce PMS to produce sulfate radicals (SO₄^•-). Overall, this study is dedicated to a new insight into the in-depth mechanism of PMS activation by OVs-rich catalysts and provides a novel strategy for reactive species regulation in PMS based oxidation process.

Guest Molecule Insertion-Optimized d-Band Center Position in MoS2 with Improved Sulfite Activation Ability Inspired by Sulfite Oxidase

As a prospective member in the family of advanced oxidation processes (AOPs), heterogeneous sulfite activation shows low cost and high safety for poisonous organic pollutants' degradation. To obtain an efficient sulfite activator, sulfite oxidase (SuO_x), a molybdenum-based enzyme that can prompt oxidation and activation of sulfite, inspired us greatly. Based on the structure of SuO_x, MoS₂/BPE (BPE = 1, 2-bis-(4-pyridyl)-ethylene) is synthesized successfully. In MoS₂/BPE, the BPE molecule is inserted between the MoS₂ layers as a pillar and the N atom links with Mo⁴⁺ directly. MoS₂/BPE shows excellent SuO_x mimic activity. Theoretical calculation implies that BPE insertion optimizes the d-band center position of MoS₂/BPE, which regulates the interaction between MoS₂ and *SO₄^2-. This prompts ^•SO₄^- generation and organic pollutants' degradation. At pH 7.0, its tetracycline degradation efficiency achieved is 93.9% in 30 min. Furthermore, its sulfite activation ability also endows MoS₂/BPE with excellent antibiofouling performance because ^•SO₄^- can kill the microorganisms in water effectively. This work develops a new sulfite activator based on SuO_x. The connection between structure and SuO_x mimic activity and sulfite activation ability is clarified in detail.

Activity Regulating Strategies of Nanozymes for Biomedical Applications

On accounts of the advantages of inherent high stability, ease of preparation and superior catalytic activities, nanozymes have attracted tremendous potential in diverse biomedical applications as alternatives to natural enzymes. Optimizing the activity of nanozymes is significant for widening and boosting the applications into practical level. As the research of the catalytic activity regulation strategies of nanozymes is boosting, it is essential to timely review, summarize, and analyze the advances in structure-activity relationships for further inspiring ingenious research into this prosperous area. Herein, the activity regulation methods of nanozymes in the recent 5 years are systematically summarized, including size and morphology, doping, vacancy, surface modification, and hybridization, followed by a discussion of the latest biomedical applications consisting of biosensing, antibacterial, and tumor therapy. Finally, the challenges and opportunities in this rapidly developing field is presented for inspiring more and more research into this infant yet promising area.

Preparation of 2D Polyaniline/MoO3- x Superlattice Nanosheets via Intercalation-Induced Morphological Transformation for Efficient Chemodynamic Therapy

Organic intercalation of layered nanomaterials is an attractive strategy to fabricate organic/inorganic superlattices for a wide range of promising applications. However, the synthesis of 2D organic/inorganic superlattice nanosheets remains a big challenge. Herein, the preparation of 2D polyaniline/MoO_{3- x} (PANI/MoO_{3- x} ) superlattice nanosheets via intercalation-induced morphological transformation from MoO₃  nanobelts, as efficient Fenton-like reagents for chemodynamic therapy (CDT), is reported. Micrometer-long MoO₃  nanobelts are co-intercalated with Na⁺ /H₂ O followed by the guest exchange with aniline monomer for in situ polymerization to obtain PANI/MoO_{3- x} nanosheets. Intriguingly, the PANI intercalation can induce the morphological transformation from long MoO₃  nanobelts to 2D PANI/MoO_{3- x} nanosheets along with the partial reduction of Mo⁶⁺ to Mo⁵⁺ , and generation of rich oxygen vacancies. More importantly, thanks to the PANI intercalation-induced activation, the PANI/MoO_{3- x} nanosheets exhibit excellent Fenton-like catalytic activity for generation of hydroxyl radical (·OH) by decomposing H₂ O₂  compared with the MoO₃  nanobelts. It is speculated that the good conductivity of PANI can facilitate electron transport during the Fenton-like reaction, thereby enhancing the efficiency of CDT. Thus, the polyvinylpyrrolidone-modified PANI/MoO_{3- x} nanosheets can function as Fenton-like reagents for highly efficient CDT to kill cancer cells and eradicate tumors.

Superoxide Radical-Mediated Self-Synthesized Au/MoO3-x Hybrids with Enhanced Peroxidase-like Activity and Photothermal Effect for Anti-MRSA Therapy

A rapid increase in methicillin-resistant Staphylococcus aureus (MRSA) induced infection has been noticed in recent years and the biofilm formed by MRSA further delays wound healing, causing a high mortality rate. Hence, a safe and effective superoxide radical (O₂^•-) mediated self-synthesis strategy is developed to prepare Au-doped MoO_3-x (Au/MoO_3-x) plasmonic-semiconductor hybrid for the elimination of MRSA mediated wound infection. The synthesis mechanism of Au NPs is systematically investigated, proving that O₂^•- plays a key role in reduction of HAuCl₄ into Au NPs in the presence of H₂O and O₂. Au-doped MoO_3-x exhibits the improved photothermal conversion efficiency (∼52.40%) compared with MoO_3-x (∼41.11%). Moreover, the peroxidase (POD)-like activity of Au/MoO_3-x hybrid is higher than that of MoO_3-x NPs, resulting in increased yield of highly toxic ·OH. In combination with the enhanced photothermal and POD-like properties, Au/MoO_3-x hybrid achieves efficient elimination of MRSA bacteria with eradication ratio of ∼99.76%. Additionally, the as-prepared Au/MoO_3-x NPs exhibit excellent biosafety, which is verified via in vitro and in vivo experiments. This study provides the basis for exploring MoO_3-x-based hybrids via a green O₂^•--mediated self-synthesis approach.

Nanozymes-recent development and biomedical applications

Nanozyme is a series of nanomaterials with enzyme-mimetic activities that can proceed with the catalytic reactions of natural enzymes. In the field of biomedicine, nanozymes are capturing tremendous attention due to their high stability and low cost. Enzyme-mimetic activities of nanozymes can be regulated by multiple factors, such as the chemical state of metal ion, pH, hydrogen peroxide (H₂O₂), and glutathione (GSH) level, presenting great promise for biomedical applications. Over the past decade, multi-functional nanozymes have been developed for various biomedical applications. To promote the understandings of nanozymes and the development of novel and multifunctional nanozymes, we herein provide a comprehensive review of the nanozymes and their applications in the biomedical field. Nanozymes with versatile enzyme-like properties are briefly overviewed, and their mechanism and application are discussed to provide understandings for future research. Finally, underlying challenges and prospects of nanozymes in the biomedical frontier are discussed in this review.

PEGylation of boronate-affinity-oriented surface imprinting magnetic nanoparticles with improved performance

High specific selectivity is the continuous goal of exploit glycoprotein-imprinted materials. Boronate-affinity-oriented surface imprinting can limit the heterogeneity of imprinted cavities, and PEGylation can reduce the nonspecific adsorption of imprinted materials towards non-target molecules. However, there are no reports on the integration of the above two advantages. Herein, we first integrated the boronate-affinity-oriented surface imprinting and PEGylation, and fabricated PEGylated boronate-affinity-oriented surface imprinting magnetic nanoparticles (PBSIMN) with horseradish peroxidase (HRP) as a model glycoprotein template. The successful synthesis of PBSIMN was demonstrated in detail by various characterization. Compared with non-PEGylated control, the PBSIMN showed greater adsorption capacity for HRP, and faster adsorption rate. To evaluate the improved performance, the PBSIMN was linked with hydrophilic boronic acid-modified/fluorescein isothiocyanate-loaded graphene oxide (BFGO), and used for the detection of HRP in real samples. Because PEGylation led to decrease of non-specific binding on PBSIMN, the proposed strategy provided ultrahigh sensitivity with limit of detection of 6.0 fg mL^-1 for HRP, which were an order of magnitude lower than the non-PEGylated counterparts. When spiked with 0.05, 0.5 and 5.0 mg mL^-1, recoveries of HRP were in the range of 97.4%-101.8% with relative standard deviation (RSD) no more than 5.4% for mouse serum, and between 98.2% and 103.2% with RSD no more than 5.0% human serum. This work indicates that the boronate-affinity-oriented surface imprinting and PEGylation can improve the performance of imprinted materials.

Dynamic nano-assemblies based on two-dimensional inorganic nanoparticles: Construction and preclinical demonstration

Dynamic drug delivery systems (DDSs) have the ability of transforming their morphology and functionality in response to the biological microenvironments at the disease site and/or external stimuli, show spatio-temporally controllable drug delivery, and enhance the treatment efficacy. Due to the large surface area and modification flexibility, two-dimensional (2D) inorganic nanomaterials are being increasingly exploited for developing intelligent DDSs for biomedical applications. In this review, we summarize the engineering methodologies used to construct transformable 2D DDSs, including changing compositions, creating defects, and surface dot-coating with polymers, biomolecules, or nanodots. Then we present and discuss dynamic inorganic 2D DDSs whose transformation is driven by the diseased characteristics, such as pH gradient, redox, hypoxia, and enzyme in the tumor microenvironment as well as the external stimuli including light, magnetism, and ultrasound. Finally, the limitations and challenges of current transformable inorganic DDSs for clinical translation and their in vivo safety assessment are discussed.

CuxO nanorods with excellent regenerable NADH peroxidase mimics and its application for selective and sensitive fluorimetric ethanol sensing

Cu_xO nanorods with excellent NADH peroxidase mimics were synthesized by a simple hydrothermal method. The catalytic oxidation of NADH to NAD cofactor strictly follows the enzymatic kinetics with high catalytic rate and strong affinity. The catalytic mechanism of Cu_xO NRs was that in the presence of hydrogen peroxide, the catalytic oxidizing NADH to NAD ⁺ involving with O₂^.-.anion production, making it realistic to mutually convert between coenzymes. Considering that the mutual transformation of NADH/NAD cofactors plays an important role in biological function, combination of Cu_xO NRs with alcohol dehydrogenase, a highly selective method for fluorimetric detection of ethanol was established. The as-proposed sensing platform is capable of dectecting alcohol with the limit of detection of 26.7 μM (S/N = 3) and applied in practical sample with satisfied accuracy and recovery. The as-developed regenerable NADH peroxidase mimics would also cast lights in biocatalysis, synthetic biology and bioenergy.

An Isopolymolybdate-Incorporated Metal-Organic Framework with Sulfite Oxidase-Mimicking Activity for Photocatalytic Oxidation of Sulfides Utilizing In Situ-Generated Singlet Oxygen

Developing new photocatalysts for sulfide oxidation utilizing in situ-generated 1O2 is very significant. Inspired by natural enzymatic processes, we synthesized a mimic sulfite oxidase (SO), {[Co(Mo4O13)(TPT)2]} (CoMo-TPT), by incorporating an isopolymolybdate anion [Mo4O13]2- into a 2,4,6-tri(4-pyridyl)-1,3,5-triazine (TPT)-based metal-organic framework under mild hydrothermal conditions. In this structure, {Mo4O13} units with intrinsic SO-like catalytic sites are beneficial for the selective oxidation of sulfite and thioether. The ultraviolet-visible spectra of CoMo-TPT exhibited strong absorption from 250 to 650 nm and potential application in the utilization of solar energy. Mott-Schottky measurements indicated that CoMo-TPT is an n-type semiconductor with a LUMO value of -0.70 V (vs NHE) and a HOMO value of 1.39 V. The transient photocurrent responses with strong current density cycles with visible light indicated CoMo-TPT has a high photochemical activity. The lower resistance indicated that CoMo-TPT has a higher efficiency of photoinduced electron and hole separation. CoMo-TPT displayed a high efficiency of 99% and a selectivity of 97.3% in photocatalytic oxidation of sulfides by utilizing in situ-generated 1O2 through a tandem process of formation of H2O2 from O2 followed by catalyzed disproportionation of H2O2.

Recent advances in visual detection for cancer biomarkers and infectious pathogens

It is an urgency to detect infectious pathogens or cancer biomarkers using rapid, simple, convenient and cost-effective methods in complex biological samples. Many existing approaches (traditional virus culture, ELISA or PCR) for the pathogen and biomarker assays face several challenges in the clinical applications that require lengthy time, sophisticated sample pre-treatment and expensive instruments. Due to the simple and rapid detection manner as well as no requirement of expensive equipment, many visual detection methods have been considered to resolve the aforementioned problems. Meanwhile, various new materials and colorimetric/fluorescent methods have been tried to construct new biosensors for infectious pathogens and biomarkers. However, the recent progress of these aspects is rarely reviewed, especially in terms of integration of new materials, microdevice and detection mechanism into the visual detection systems. Herein, we provide a broad field of view to discuss the recent progress in the visual detection of infectious pathogens and cancer biomarkers along with the detection mechanism, new materials, novel detection methods, special targets as well as multi-functional microdevices and systems. The novel visual approaches for the infectious pathogens and biomarkers, such as bioluminescence resonance energy transfer (BRET), metal-induced metallization and clustered regularly interspaced short palindromic repeats (CRISPR)-based biosensors, are discussed. Additionally, recent advancements in visual assays utilizing various new materials for proteins, nucleic acids, viruses, exosomes and small molecules are comprehensively reviewed. Future perspectives on the visual sensing systems for infectious pathogens and cancers are also proposed.

Fluorometric Detection of Thiamine Based on Hemoglobin-Cu3(PO4)2 Nanoflowers (NFs) with Peroxidase Mimetic Activity

Component analysis plays an important role in food production, pharmaceutics and agriculture. Nanozymes have attracted wide attention in analytical applications for their enzyme-like properties. In this work, a fluorometric method is described for the determination of thiamine (TH) (vitamin B1) based on hemoglobin-Cu3(PO4)2 nanoflowers (Hb-Cu3(PO4)2 NFs) with peroxidase-like properties. The Hb-Cu3(PO4)2 NFs catalyzed the decomposition of H2O2 into ·OH radicals in an alkaline solution that could efficiently react with nonfluorescent thiamine to fluoresce thiochrome. The fluorescence of thiochrome was further enhanced with a nonionic surfactant, Tween 80. Under optimal reaction conditions, the linear range for thiamine was from 5 × 10-8 to 5 × 10-5 mol/L. The correlation coefficient for the calibration curve and the limit of detection (LOD) were 0.9972 and 4.8 × 10-8 mol/L, respectively. The other vitamins did not bring about any obvious changes in fluorescence. The developed method based on hybrid nanoflowers is specific, pragmatically simple and sensitive, and has potential for application in thiamine detection.

COF-inspired fabrication of two-dimensional polyoxometalate based open frameworks for biomimetic catalysis

The development of highly efficient and robust biomimetic catalysts is an essential and feasible strategy to overcome the intrinsic drawbacks of natural enzymes. Inspired by the synthetic strategy of covalent organic frameworks, we adopted a covalent-bond-driven strategy to prepare polyoxometalate (POM) based open frameworks (NKPOM-OFs = Nankai University POM-OFs) with abundant Mo[double bond, length as m-dash]O groups that can mimic the active center of sulfite oxidase. Four 2-dimensional (2D) NKPOM-OFs were designed and synthesized via the condensation reaction of linear amino-containing POMs with planar tetra-aldehyde monomers. Benefitting from the high crystallinity, the structures of 2D POM-OFs can be successfully determined from structural simulations. The results unveiled that NKPOM-OFs possessed 2D staggered stacking layered structures with the sql topology. All these NKPOM-OFs exhibited high crystallinity and stability and demonstrated outstanding performance to serve as biomimetic catalysts of sulfite oxidase with good recyclability. Notably, exfoliation of NKPOM-OFs under ultrasonic treatment can significantly boost the catalytic activity with almost two times faster reaction rates. This study not only enriches the facile and versatile synthesis strategy for POM-OFs but also provides new biomimetic platforms for biocatalysis.

Hot Carriers and Photothermal Effects of Monolayer MoOx for Promoting Sulfite Oxidase Mimetic Activity

Local surface plasmon resonance (LSPR)-enhanced catalysis has brought a substantial amount of opportunities across various disciplines such as photocatalysis, photodetection, and photothermal therapeutics. Plasmon-induced photothermal and hot carriers effects have also been utilized to activate the enzyme-like reactions. Compared with natural enzymes, the relatively low catalytic performance of nanozymes severely hampered the potential applications in the field of biomedicine. For these issues mentioned above, herein, we demonstrate a highly efficient sulfite oxidase (SuO_x) mimetic performance of plasmonic monolayer MoO_x (ML-MoO_x) upon LSPR excitation. We also established that the considerable photothermal effect and the injection of hot carriers induced by LSPR are responsible for promoting the SuO_x activity of ML-MoO_x. The high transient local temperature on the surface of ML-MoO_x generated by the photothermal effect facilitates to impact the reaction velocity and feed the SuO_x-like activity, while the generation of hot carriers which are suggested as predominant effects catalyzes the oxidation of sulfite to sulfate through significantly decreasing the activation energy for the SuO_x-like reaction. These investigations present a contribution to the basic understanding of plasmon-enhanced enzyme-like reaction and provided an insight into the optimization of the SuO_x mimetic performance of nanomaterials.